- 24 Jan, 2014 37 commits
-
-
Paul Gortmaker authored
Code that is obj-y (always built-in) or dependent on a bool Kconfig (built-in or absent) can never be modular. So using module_init as an alias for __initcall can be somewhat misleading. Fix these up now, so that we can relocate module_init from init.h into module.h in the future. If we don't do this, we'd have to add module.h to obviously non-modular code, and that would be a worse thing. The audit targets the following module_init users for change: mm/ksm.c bool KSM mm/mmap.c bool MMU mm/huge_memory.c bool TRANSPARENT_HUGEPAGE mm/mmu_notifier.c bool MMU_NOTIFIER Note that direct use of __initcall is discouraged, vs. one of the priority categorized subgroups. As __initcall gets mapped onto device_initcall, our use of subsys_initcall (which makes sense for these files) will thus change this registration from level 6-device to level 4-subsys (i.e. slightly earlier). However no observable impact of that difference has been observed during testing. One might think that core_initcall (l2) or postcore_initcall (l3) would be more appropriate for anything in mm/ but if we look at some actual init functions themselves, we see things like: mm/huge_memory.c --> hugepage_init --> hugepage_init_sysfs mm/mmap.c --> init_user_reserve --> sysctl_user_reserve_kbytes mm/ksm.c --> ksm_init --> sysfs_create_group and hence the choice of subsys_initcall (l4) seems reasonable, and at the same time minimizes the risk of changing the priority too drastically all at once. We can adjust further in the future. Also, several instances of missing ";" at EOL are fixed. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Gortmaker authored
The use of __initcall is to be eventually replaced by choosing one from the prioritized groupings laid out in init.h header: pure_initcall 0 core_initcall 1 postcore_initcall 2 arch_initcall 3 subsys_initcall 4 fs_initcall 5 device_initcall 6 late_initcall 7 In the interim, all __initcall are mapped onto device_initcall, which as can be seen above, comes quite late in the ordering. Currently the mm_kobj is created with __initcall in mm_sysfs_init(). This means that any other initcalls that want to reference the mm_kobj have to be device_initcall (or later), otherwise we will for example, trip the BUG_ON(!kobj) in sysfs's internal_create_group(). This unfairly restricts those users; for example something that clearly makes sense to be an arch_initcall will not be able to choose that. However, upon examination, it is only this way for historical reasons (i.e. simply not reprioritized yet). We see that sysfs is ready quite earlier in init/main.c via: vfs_caches_init |_ mnt_init |_ sysfs_init well ahead of the processing of the prioritized calls listed above. So we can recategorize mm_sysfs_init to be a pure_initcall, which in turn allows any mm_kobj initcall users a wider range (1 --> 7) of initcall priorities to choose from. Signed-off-by: -
Han Pingtian authored
min_free_kbytes may be raised during THP's initialization. Sometimes, this will change the value which was set by the user. Showing this message will clarify this confusion. Only show this message when changing a value which was set by the user according to Michal Hocko's suggestion. Show the old value of min_free_kbytes according to Dave Hansen's suggestion. This will give user the chance to restore old value of min_free_kbytes. Signed-off-by:
Han Pingtian <hanpt@linux.vnet.ibm.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by:
-
Nathan Zimmer authored
We don't need to do register_memory_resource() under lock_memory_hotplug() since it has its own lock and doesn't make any callbacks. Also register_memory_resource return NULL on failure so we don't have anything to cleanup at this point. The reason for this rfc is I was doing some experiments with hotplugging of memory on some of our larger systems. While it seems to work, it can be quite slow. With some preliminary digging I found that lock_memory_hotplug is clearly ripe for breakup. It could be broken up per nid or something but it also covers the online_page_callback. The online_page_callback shouldn't be very hard to break out. Also there is the issue of various structures(wmarks come to mind) that are only updated under the lock_memory_hotplug that would need to be dealt with. Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Hedi <hedi@sgi.com> Cc: Mike Travis <travis@sgi.com> Signed-off-by:
-
Philipp Hachtmann authored
get_allocated_memblock_reserved_regions_info() should work if it is compiled in. Extended the ifdef around get_allocated_memblock_memory_regions_info() to include get_allocated_memblock_reserved_regions_info() as well. Similar changes in nobootmem.c/free_low_memory_core_early() where the two functions are called. [akpm@linux-foundation.org: cleanup] Signed-off-by:
Philipp Hachtmann <phacht@linux.vnet.ibm.com> Cc: qiuxishi <qiuxishi@huawei.com> Cc: David Howells <dhowells@redhat.com> Cc: Daeseok Youn <daeseok.youn@gmail.com> Cc: Jiang Liu <liuj97@gmail.com> Acked-by:
Yinghai Lu <yinghai@kernel.org> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Vladimir Davydov authored
If a shrinker is not NUMA-aware, shrink_slab() should call it exactly once with nid=0, but currently it is not true: if node 0 is not set in the nodemask or if it is not online, we will not call such shrinkers at all. As a result some slabs will be left untouched under some circumstances. Let us fix it. Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Reported-by:
Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Glauber Costa <glommer@gmail.com> Signed-off-by:
-
Vladimir Davydov authored
When reclaiming kmem, we currently don't scan slabs that have less than batch_size objects (see shrink_slab_node()): while (total_scan >= batch_size) { shrinkctl->nr_to_scan = batch_size; shrinker->scan_objects(shrinker, shrinkctl); total_scan -= batch_size; } If there are only a few shrinkers available, such a behavior won't cause any problems, because the batch_size is usually small, but if we have a lot of slab shrinkers, which is perfectly possible since FS shrinkers are now per-superblock, we can end up with hundreds of megabytes of practically unreclaimable kmem objects. For instance, mounting a thousand of ext2 FS images with a hundred of files in each and iterating over all the files using du(1) will result in about 200 Mb of FS caches that cannot be dropped even with the aid of the vm.drop_caches sysctl! This problem was initially pointed out by Glauber Costa [*]. Glauber proposed to fix it by making the shrink_slab() always take at least one pass, to put it simply, turning the scan loop above to a do{}while() loop. However, this proposal was rejected, because it could result in more aggressive and frequent slab shrinking even under low memory pressure when total_scan is naturally very small. This patch is a slightly modified version of Glauber's approach. Similarly to Glauber's patch, it makes shrink_slab() scan less than batch_size objects, but only if the total number of objects we want to scan (total_scan) is greater than the total number of objects available (max_pass). Since total_scan is biased as half max_pass if the current delta change is small: if (delta < max_pass / 4) total_scan = min(total_scan, max_pass / 2); this is only possible if we are scanning at high prio. That said, this patch shouldn't change the vmscan behaviour if the memory pressure is low, but if we are tight on memory, we will do our best by trying to reclaim all available objects, which sounds reasonable. [*] http://www.spinics.net/lists/cgroups/msg06913.htmlSigned-off-by: -
Wanpeng Li authored
Commit 7851a45c ("mm: numa: Copy cpupid on page migration") copiess over the cpupid at page migration time. It is unnecessary to set it again in migrate_misplaced_transhuge_page(). Signed-off-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Jianguo Wu authored
Two cleanups: 1. remove redundant codes for hugetlb pages. 2. end = pmd_addr_end(addr, end) restricts [addr, end) within PMD_SIZE, this may increase do_mincore() calls, remove it. Signed-off-by:
Jianguo Wu <wujianguo@huawei.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: qiuxishi <qiuxishi@huawei.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Shawn Guo authored
Compiling a C file which includes genalloc.h but without spinlock_types.h being included before, we will see the compile error below. include/linux/genalloc.h:54:2: error: unknown type name `spinlock_t' Include spinlock_types.h from genalloc.h to fix the problem. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Vinayak Menon authored
When irq, preempt and lockdep fields are printed (field 3 in the example below) in the trace output, the script fails. An example entry: kswapd0-610 [000] ...1 158.112152: mm_vmscan_kswapd_wake: nid=0 order=0 Signed-off-by:
Vinayak Menon <vinayakm.list@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Han Pingtian authored
If echo -1 > /proc/vm/sys/min_free_kbytes, the system will hang. Changing proc_dointvec() to proc_dointvec_minmax() in the min_free_kbytes_sysctl_handler() can prevent this to happen. mhocko said: : You can still do echo $BIG_VALUE > /proc/vm/sys/min_free_kbytes and make : your machine unusable but I agree that proc_dointvec_minmax is more : suitable here as we already have: : : .proc_handler = min_free_kbytes_sysctl_handler, : .extra1 = &zero, : : It used to work properly but then 6fce56ec ("sysctl: Remove references : to ctl_name and strategy from the generic sysctl table") has removed : sysctl_intvec strategy and so extra1 is ignored. Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Michal Hocko authored
Commit 11c731e8 ("mm/mempolicy: fix !vma in new_vma_page()") has removed BUG_ON(!vma) from new_vma_page which is partially correct because page_address_in_vma will return EFAULT for non-linear mappings and at least shared shmem might be mapped this way. The patch also tried to prevent NULL ptr for hugetlb pages which is not correct AFAICS because hugetlb pages cannot be mapped as VM_NONLINEAR and other conditions in page_address_in_vma seem to be legit and catch real bugs. This patch restores BUG_ON for PageHuge to catch potential issues when the to-be-migrated page is not setup properly. Signed-off-by:
Bob Liu <bob.liu@oracle.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Naoya Horiguchi authored
After thp split in hwpoison_user_mappings(), we hold page lock on the raw error page only between try_to_unmap, hence we are in danger of race condition. I found in the RHEL7 MCE-relay testing that we have "bad page" error when a memory error happens on a thp tail page used by qemu-kvm: Triggering MCE exception on CPU 10 mce: [Hardware Error]: Machine check events logged MCE exception done on CPU 10 MCE 0x38c535: Killing qemu-kvm:8418 due to hardware memory corruption MCE 0x38c535: dirty LRU page recovery: Recovered qemu-kvm[8418]: segfault at 20 ip 00007ffb0f0f229a sp 00007fffd6bc5240 error 4 in qemu-kvm[7ffb0ef14000+420000] BUG: Bad page state in process qemu-kvm pfn:38c400 page:ffffea000e310000 count:0 mapcount:0 mapping: (null) index:0x7ffae3c00 page flags: 0x2fffff0008001d(locked|referenced|uptodate|dirty|swapbacked) Modules linked in: hwpoison_inject mce_inject vhost_net macvtap macvlan ... CPU: 0 PID: 8418 Comm: qemu-kvm Tainted: G M -------------- 3.10.0-54.0.1.el7.mce_test_fixed.x86_64 #1 Hardware name: NEC NEC Express5800/R120b-1 [N8100-1719F]/MS-91E7-001, BIOS 4.6.3C19 02/10/2011 Call Trace: dump_stack+0x19/0x1b bad_page.part.59+0xcf/0xe8 free_pages_prepare+0x148/0x160 free_hot_cold_page+0x31/0x140 free_hot_cold_page_list+0x46/0xa0 release_pages+0x1c1/0x200 free_pages_and_swap_cache+0xad/0xd0 tlb_flush_mmu.part.46+0x4c/0x90 tlb_finish_mmu+0x55/0x60 exit_mmap+0xcb/0x170 mmput+0x67/0xf0 vhost_dev_cleanup+0x231/0x260 [vhost_net] vhost_net_release+0x3f/0x90 [vhost_net] __fput+0xe9/0x270 ____fput+0xe/0x10 task_work_run+0xc4/0xe0 do_exit+0x2bb/0xa40 do_group_exit+0x3f/0xa0 get_signal_to_deliver+0x1d0/0x6e0 do_signal+0x48/0x5e0 do_notify_resume+0x71/0xc0 retint_signal+0x48/0x8c The reason of this bug is that a page fault happens before unlocking the head page at the end of memory_failure(). This strange page fault is trying to access to address 0x20 and I'm not sure why qemu-kvm does this, but anyway as a result the SIGSEGV makes qemu-kvm exit and on the way we catch the bad page bug/warning because we try to free a locked page (which was the former head page.) To fix this, this patch suggests to shift page lock from head page to tail page just after thp split. SIGSEGV still happens, but it affects only error affected VMs, not a whole system. Signed-off-by: -
Andi Kleen authored
Add a working sysctl to enable/disable automatic numa memory balancing at runtime. This allows us to track down performance problems with this feature and is generally a good idea. This was possible earlier through debugfs, but only with special debugging options set. Also fix the boot message. [akpm@linux-foundation.org: s/sched_numa_balancing/sysctl_numa_balancing/] Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Philipp Hachtmann authored
When calling free_all_bootmem() the free areas under memblock's control are released to the buddy allocator. Additionally the reserved list is freed if it was reallocated by memblock. The same should apply for the memory list. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Philipp Hachtmann authored
When memblock_reserve() fails because memblock.reserved.regions cannot be resized, the caller (e.g. alloc_bootmem()) is not informed of the failed allocation. Therefore alloc_bootmem() silently returns the same pointer again and again. This patch adds a check for the return value of memblock_reserve() in __alloc_memory_core(). Signed-off-by:
-
Vladimir Davydov authored
Currently we take both the memcg_create_mutex and the set_limit_mutex when we enable kmem accounting for a memory cgroup, which makes kmem activation events serialize with both memcg creations and other memcg limit updates (memory.limit, memory.memsw.limit). However, there is no point in such strict synchronization rules there. First, the set_limit_mutex was introduced to keep the memory.limit and memory.memsw.limit values in sync. Since memory.kmem.limit can be set independently of them, it is better to introduce a separate mutex to synchronize against concurrent kmem limit updates. Second, we take the memcg_create_mutex in order to make sure all children of this memcg will be kmem-active as well. For achieving that, it is enough to hold this mutex only while checking if memcg_has_children() though. This guarantees that if a child is added after we checked that the memcg has no children, the newly added cgroup will see its parent kmem-active (of course if the latter succeeded), and call kmem activation for itself. This patch simplifies the locking rules of memcg_update_kmem_limit() according to these considerations. [vdavydov@parallels.com: fix unintialized var warning] Signed-off-by:
-
Vladimir Davydov authored
Currently we have two state bits in mem_cgroup::kmem_account_flags regarding kmem accounting activation, ACTIVATED and ACTIVE. We start kmem accounting only if both flags are set (memcg_can_account_kmem()), plus throughout the code there are several places where we check only the ACTIVE flag, but we never check the ACTIVATED flag alone. These flags are both set from memcg_update_kmem_limit() under the set_limit_mutex, the ACTIVE flag always being set after ACTIVATED, and they never get cleared. That said checking if both flags are set is equivalent to checking only for the ACTIVE flag, and since there is no ACTIVATED flag checks, we can safely remove the ACTIVATED flag, and nothing will change. Let's try to understand what was the reason for introducing these flags. The purpose of the ACTIVE flag is clear - it states that kmem should be accounting to the cgroup. The only requirement for it is that it should be set after we have fully initialized kmem accounting bits for the cgroup and patched all static branches relating to kmem accounting. Since we always check if static branch is enabled before actually considering if we should account (otherwise we wouldn't benefit from static branching), this guarantees us that we won't skip a commit or uncharge after a charge due to an unpatched static branch. Now let's move on to the ACTIVATED bit. As I proved in the beginning of this message, it is absolutely useless, and removing it will change nothing. So what was the reason introducing it? The ACTIVATED flag was introduced by commit a8964b9b ("memcg: use static branches when code not in use") in order to guarantee that static_key_slow_inc(&memcg_kmem_enabled_key) would be called only once for each memory cgroup when its kmem accounting was activated. The point was that at that time the memcg_update_kmem_limit() function's work-flow looked like this: bool must_inc_static_branch = false; cgroup_lock(); mutex_lock(&set_limit_mutex); if (!memcg->kmem_account_flags && val != RESOURCE_MAX) { /* The kmem limit is set for the first time */ ret = res_counter_set_limit(&memcg->kmem, val); memcg_kmem_set_activated(memcg); must_inc_static_branch = true; } else ret = res_counter_set_limit(&memcg->kmem, val); mutex_unlock(&set_limit_mutex); cgroup_unlock(); if (must_inc_static_branch) { /* We can't do this under cgroup_lock */ static_key_slow_inc(&memcg_kmem_enabled_key); memcg_kmem_set_active(memcg); } So that without the ACTIVATED flag we could race with other threads trying to set the limit and increment the static branching ref-counter more than once. Today we call the whole memcg_update_kmem_limit() function under the set_limit_mutex and this race is impossible. As now we understand why the ACTIVATED bit was introduced and why we don't need it now, and know that removing it will change nothing anyway, let's get rid of it. Signed-off-by:
-
Vladimir Davydov authored
We relocate root cache's memcg_params whenever we need to grow the memcg_caches array to accommodate all kmem-active memory cgroups. Currently on relocation we free the old version immediately, which can lead to use-after-free, because the memcg_caches array is accessed lock-free (see cache_from_memcg_idx()). This patch fixes this by making memcg_params RCU-protected for root caches. Signed-off-by:
-
Vladimir Davydov authored
There is no point in flooding logs with warnings or especially crashing the system if we fail to create a cache for a memcg. In this case we will be accounting the memcg allocation to the root cgroup until we succeed to create its own cache, but it isn't that critical. Signed-off-by:
-
Vladimir Davydov authored
kmem_cache_dup() is only called from memcg_create_kmem_cache(). The latter, in fact, does nothing besides this, so let's fold kmem_cache_dup() into memcg_create_kmem_cache(). This patch also makes the memcg_cache_mutex private to memcg_create_kmem_cache(), because it is not used anywhere else. Signed-off-by:
-
Vladimir Davydov authored
We obtain a per-memcg cache from a root kmem_cache by dereferencing an entry of the root cache's memcg_params::memcg_caches array. If we find no cache for a memcg there on allocation, we initiate the memcg cache creation (see memcg_kmem_get_cache()). The cache creation proceeds asynchronously in memcg_create_kmem_cache() in order to avoid lock clashes, so there can be several threads trying to create the same kmem_cache concurrently, but only one of them may succeed. However, due to a race in the code, it is not always true. The point is that the memcg_caches array can be relocated when we activate kmem accounting for a memcg (see memcg_update_all_caches(), memcg_update_cache_size()). If memcg_update_cache_size() and memcg_create_kmem_cache() proceed concurrently as described below, we can leak a kmem_cache. Asume two threads schedule creation of the same kmem_cache. One of them successfully creates it. Another one should fail then, but if memcg_create_kmem_cache() interleaves with memcg_update_cache_size() as follows, it won't: memcg_create_kmem_cache() memcg_update_cache_size() (called w/o mutexes held) (called with slab_mutex, set_limit_mutex held) ------------------------- ------------------------- mutex_lock(&memcg_cache_mutex) s->memcg_params=kzalloc(...) new_cachep=cache_from_memcg_idx(cachep,idx) // new_cachep==NULL => proceed to creation s->memcg_params->memcg_caches[i] =cur_params->memcg_caches[i] // kmem_cache_create_memcg takes slab_mutex // so we will hang around until // memcg_update_cache_size finishes, but // nothing will prevent it from succeeding so // memcg_caches[idx] will be overwritten in // memcg_register_cache! new_cachep = kmem_cache_create_memcg(...) mutex_unlock(&memcg_cache_mutex) Let's fix this by moving the check for existence of the memcg cache to kmem_cache_create_memcg() to be called under the slab_mutex and make it return NULL if so. A similar race is possible when destroying a memcg cache (see kmem_cache_destroy()). Since memcg_unregister_cache(), which clears the pointer in the memcg_caches array, is called w/o protection, we can race with memcg_update_cache_size() and omit clearing the pointer. Therefore memcg_unregister_cache() should be moved before we release the slab_mutex. Signed-off-by: -
Vladimir Davydov authored
All caches of the same memory cgroup are linked in the memcg_slab_caches list via kmem_cache::memcg_params::list. This list is traversed, for example, when we read memory.kmem.slabinfo. Since the list actually consists of memcg_cache_params objects, we have to convert an element of the list to a kmem_cache object using memcg_params_to_cache(), which obtains the pointer to the cache from the memcg_params::memcg_caches array of the corresponding root cache. That said the pointer to a kmem_cache in its parent's memcg_params must be initialized before adding the cache to the list, and cleared only after it has been unlinked. Currently it is vice-versa, which can result in a NULL ptr dereference while traversing the memcg_slab_caches list. This patch restores the correct order. Signed-off-by:
-
Vladimir Davydov authored
Each root kmem_cache has pointers to per-memcg caches stored in its memcg_params::memcg_caches array. Whenever we want to allocate a slab for a memcg, we access this array to get per-memcg cache to allocate from (see memcg_kmem_get_cache()). The access must be lock-free for performance reasons, so we should use barriers to assert the kmem_cache is up-to-date. First, we should place a write barrier immediately before setting the pointer to it in the memcg_caches array in order to make sure nobody will see a partially initialized object. Second, we should issue a read barrier before dereferencing the pointer to conform to the write barrier. However, currently the barrier usage looks rather strange. We have a write barrier *after* setting the pointer and a read barrier *before* reading the pointer, which is incorrect. This patch fixes this. Signed-off-by:
-
Vladimir Davydov authored
Currently, we have rather a messy function set relating to per-memcg kmem cache initialization/destruction. Per-memcg caches are created in memcg_create_kmem_cache(). This function calls kmem_cache_create_memcg() to allocate and initialize a kmem cache and then "registers" the new cache in the memcg_params::memcg_caches array of the parent cache. During its work-flow, kmem_cache_create_memcg() executes the following memcg-related functions: - memcg_alloc_cache_params(), to initialize memcg_params of the newly created cache; - memcg_cache_list_add(), to add the new cache to the memcg_slab_caches list. On the other hand, kmem_cache_destroy() called on a cache destruction only calls memcg_release_cache(), which does all the work: it cleans the reference to the cache in its parent's memcg_params::memcg_caches, removes the cache from the memcg_slab_caches list, and frees memcg_params. Such an inconsistency between destruction and initialization paths make the code difficult to read, so let's clean this up a bit. This patch moves all the code relating to registration of per-memcg caches (adding to memcg list, setting the pointer to a cache from its parent) to the newly created memcg_register_cache() and memcg_unregister_cache() functions making the initialization and destruction paths look symmetrical. Signed-off-by:
-
Vladimir Davydov authored
We do not free the cache's memcg_params if __kmem_cache_create fails. Fix this. Plus, rename memcg_register_cache() to memcg_alloc_cache_params(), because it actually does not register the cache anywhere, but simply initialize kmem_cache::memcg_params. [akpm@linux-foundation.org: fix build] Signed-off-by:
-
Vladimir Davydov authored
Currently kmem_cache_create_memcg() backoffs on failure inside conditionals, without using gotos. This results in the rollback code duplication, which makes the function look cumbersome even though on error we should only free the allocated cache. Since in the next patch I am going to add yet another rollback function call on error path there, let's employ labels instead of conditionals for undoing any changes on failure to keep things clean. Signed-off-by:
Pekka Enberg <penberg@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by:
-
Sasha Levin authored
Most of the VM_BUG_ON assertions are performed on a page. Usually, when one of these assertions fails we'll get a BUG_ON with a call stack and the registers. I've recently noticed based on the requests to add a small piece of code that dumps the page to various VM_BUG_ON sites that the page dump is quite useful to people debugging issues in mm. This patch adds a VM_BUG_ON_PAGE(cond, page) which beyond doing what VM_BUG_ON() does, also dumps the page before executing the actual BUG_ON. [akpm@linux-foundation.org: fix up includes] Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by:
-
Naoya Horiguchi authored
stable_page_flags() checks !PageHuge && PageTransCompound && PageLRU to know that a specified page is thp or not. But sometimes it's not enough and we fail to detect thp when the thp is on pagevec. This happens only for a few seconds after LRU list operations, but it makes it difficult to control our applications depending on this flag. So this patch adds another check PageAnon to detect thps on pagevec. It might not give the future extensibility for thp pagecache, but it's OK at least for now. Signed-off-by:
-
Vladimir Davydov authored
The vmalloc was introduced by 33327948 ("memcgroup: use vmalloc for mem_cgroup allocation"), because at that time MAX_NUMNODES was used for defining the per-node array in the mem_cgroup structure so that the structure could be huge even if the system had the only NUMA node. The situation was significantly improved by commit 45cf7ebd ("memcg: reduce the size of struct memcg 244-fold"), which made the size of the mem_cgroup structure calculated dynamically depending on the real number of NUMA nodes installed on the system (nr_node_ids), so now there is no point in using vmalloc here: the structure is allocated rarely and on most systems its size is about 1K. Signed-off-by:
-
Vlastimil Babka authored
Since commit ff6a6da6 ("mm: accelerate munlock() treatment of THP pages") munlock skips tail pages of a munlocked THP page. There is some attempt to prevent bad consequences of racing with a THP page split, but code inspection indicates that there are two problems that may lead to a non-fatal, yet wrong outcome. First, __split_huge_page_refcount() copies flags including PageMlocked from the head page to the tail pages. Clearing PageMlocked by munlock_vma_page() in the middle of this operation might result in part of tail pages left with PageMlocked flag. As the head page still appears to be a THP page until all tail pages are processed, munlock_vma_page() might think it munlocked the whole THP page and skip all the former tail pages. Before ff6a6da6, those pages would be cleared in further iterations of munlock_vma_pages_range(), but NR_MLOCK would still become undercounted (related the next point). Second, NR_MLOCK accounting is based on call to hpage_nr_pages() after the PageMlocked is cleared. The accounting might also become inconsistent due to race with __split_huge_page_refcount() - undercount when HUGE_PMD_NR is subtracted, but some tail pages are left with PageMlocked set and counted again (only possible before ff6a6da6) - overcount when hpage_nr_pages() sees a normal page (split has already finished), but the parallel split has meanwhile cleared PageMlocked from additional tail pages This patch prevents both problems via extending the scope of lru_lock in munlock_vma_page(). This is convenient because: - __split_huge_page_refcount() takes lru_lock for its whole operation - munlock_vma_page() typically takes lru_lock anyway for page isolation As this becomes a second function where page isolation is done with lru_lock already held, factor this out to a new __munlock_isolate_lru_page() function and clean up the code around. [akpm@linux-foundation.org: avoid a coding-style ugly] Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Michel Lespinasse <walken@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dave Hansen authored
bad_page() is cool in that it prints out a bunch of data about the page. But, I can never remember which page flags are good and which are bad, or whether ->index or ->mapping is required to be NULL. This patch allows bad/dump_page() callers to specify a string about why they are dumping the page and adds explanation strings to a number of places. It also adds a 'bad_flags' argument to bad_page(), which it then dumps out separately from the flags which are actually set. This way, the messages will show specifically why the page was bad, *specifically* which flags it is complaining about, if it was a page flag combination which was the problem. [akpm@linux-foundation.org: switch to pr_alert] Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by:
Christoph Lameter <cl@linux.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Dan Streetman authored
The "compressor" and "enabled" params are currently hidden, this changes them to read-only, so userspace can tell if zswap is enabled or not and see what compressor is in use. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Cc: Vladimir Murzin <murzin.v@gmail.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Weijie Yang <weijie.yang@samsung.com> Acked-by:
Seth Jennings <sjennings@variantweb.net> Signed-off-by:
-
Dave Hansen authored
Documentation/vm/locking is a blast from the past. In the entire git history, it has had precisely Three modifications. Two of those look to be pure renames, and the third was from 2005. The doc contains such gems as: > The page_table_lock is grabbed while holding the > kernel_lock spinning monitor. > Page stealers hold kernel_lock to protect against a bunch of > races. Or this which talks about mmap_sem: > 4. The exception to this rule is expand_stack, which just > takes the read lock and the page_table_lock, this is ok > because it doesn't really modify fields anybody relies on. expand_stack() doesn't take any locks any more directly, and the mmap_sem acquisition was long ago moved up in to the page fault code itself. It could be argued that we need to rewrite this, but it is dangerous to leave it as-is. It will confuse more people than it helps. Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Cc: Hugh Dickins <hughd@google.com> Acked-by:
-
Michal Simek authored
Sort the exception table at build-time rather than during boot. Microblaze is the same case as AARCH64 that's why EM_MICROBLAZE conditional check was added to allow cross-compilation on machines which are not running the latest libc-dev. Inspired by AARCH64 commit adace895 ("arm64: extable: sort the exception table at build time"). Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Acked-by:
David Daney <david.daney@cavium.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Geert Uytterhoeven authored
drivers/staging/comedi/drivers/das6402.c: In function 'intr_handler': drivers/staging/comedi/drivers/das6402.c:164:3: error: implicit declaration of function 'outw_p' [-Werror=implicit-function-declaration] drivers/staging/speakup/speakup_dtlk.c: In function 'synth_probe': drivers/staging/speakup/speakup_dtlk.c:362:2: error: implicit declaration of function 'inw_p' [-Werror=implicit-function-declaration] Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
-
- 23 Jan, 2014 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull UDF & jbd fixes from Jan Kara: "A cleanup of JBD log messages and UDF fix of a lockdep warning" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fix lockdep warning from udf_symlink() jbd: Revise KERN_EMERG error messages
-
Stephen Hemminger authored
The associative array code creates unnecessary and potentially problematic global variable 'status'. Remove it since never used. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse update from Miklos Szeredi: "This contains a fix for a potential use-after-module-unload bug noticed by Al and caching improvements for read-only fuse filesystems by Andrew Gallagher" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: support clients that don't implement 'open' fuse: don't invalidate attrs when not using atime fuse: fix SetPageUptodate() condition in STORE fuse: fix pipe_buf_operations
-
