- 29 Feb, 2016 1 commit
-
-
Neil Horman authored
Recently, I fixed a bug in 3c59x: commit 6e144419 Author: Neil Horman <nhorman@tuxdriver.com> Date: Wed Jan 13 12:43:54 2016 -0500 3c59x: fix another page map/single unmap imbalance Which correctly rebalanced dma mapping and unmapping types. Unfortunately it introduced a new bug which causes oopses on older systems. When mapping dma regions, the last entry for a packet in the 3c59x tx ring encodes a LAST_FRAG bit, which is encoded as the high order bit of the buffers length field. When it is unmapped the LAST_FRAG bit is cleared prior to being passed to the unmap function. Unfortunately the commit above fails to do that masking. It was missed in testing because the system on which I tested it had an intel iommu, the driver for which ignores the size field, using only the DMA address as the token to identify the mapping to be released. However, on older systems that rely on swiotlb (or other dma drivers that key off that length field), not masking off that LAST_FRAG high order bit results in parsing a huge size to be release, leading to all sorts of odd corruptions and the like. Fix is easy, just mask the length with 0xFFF. It should really be &(LAST_FRAG-1), but 0xFFF is the style of the file, and I'd like to make this fix minimal and correct before making it prettier. Appies to the net tree cleanly. All testing on both iommu and swiommu based systems produce good results Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 26 Feb, 2016 1 commit
-
-
MINOURA Makoto / 箕浦 真 authored
When the send skbuff reaches the end, nlmsg_put and friends returns -EMSGSIZE but it is silently thrown away in ndo_fdb_dump. It is called within a for_each_netdev loop and the first fdb entry of a following netdev could fit in the remaining skbuff. This breaks the mechanism of cb->args[0] and idx to keep track of the entries that are already dumped, which results missing entries in bridge fdb show command. Signed-off-by:
Minoura Makoto <minoura@valinux.co.jp> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 25 Feb, 2016 7 commits
-
-
Sunil Goutham authored
On Thunderx pass 1.x and pass2 due to a HW errata default CQ DROP_LEVEL of 0x80 is not sufficient to avoid CQ_WR_FULL Qset error when packets are being received at >20Mpps resulting in complete stall of packet reception. This patch will configure it to 0x100 which is what is expected by HW on Thunderx. On future passes of thunderx and other chips HW default/reset value will be 0x100 or higher hence not overwritten. Signed-off-by:
Jerin Jacob <jerin.jacob@caviumnetworks.com> Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chun-Hao Lin authored
There will be a log spam when there is no cable plugged. Please refer to following links. https://bugzilla.kernel.org/show_bug.cgi?id=104351 https://bugzilla.kernel.org/show_bug.cgi?id=107421 This issue is caused by runtime power management. When there is no cable plugged, the driver will be suspend (runtime suspend) by OS and NIC will be put into the D3 state. During this time, if OS call rtl8169_get_stats64() to dump tally counter, because NIC is in D3 state, the register value read by driver will return all 0xff. This will let driver think tally counter flag is not toggled and then sends the warning message "rtl_counters_cond == 1 (loop: 1000, delay: 10)" to kernel log. For fixing this issue, 1.add checking driver's pm runtime status in rtl8169_get_stats64(). 2.dump tally counter before going runtime suspend for counter accuracy in runtime suspend. Signed-off-by:
Chunhao Lin <hau@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
We need to update the skb->csum after pulling the skb, otherwise an unnecessary checksum (re)computation can ocure for IGMP/MLD packets in the bridge code. Additionally this fixes the following splats for network devices / bridge ports with support for and enabled RX checksum offloading: [...] [ 43.986968] eth0: hw csum failure [ 43.990344] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.4.0 #2 [ 43.996193] Hardware name: BCM2709 [ 43.999647] [<800204e0>] (unwind_backtrace) from [<8001cf14>] (show_stack+0x10/0x14) [ 44.007432] [<8001cf14>] (show_stack) from [<801ab614>] (dump_stack+0x80/0x90) [ 44.014695] [<801ab614>] (dump_stack) from [<802e4548>] (__skb_checksum_complete+0x6c/0xac) [ 44.023090] [<802e4548>] (__skb_checksum_complete) from [<803a055c>] (ipv6_mc_validate_checksum+0x104/0x178) [ 44.032959] [<803a055c>] (ipv6_mc_validate_checksum) from [<802e111c>] (skb_checksum_trimmed+0x130/0x188) [ 44.042565] [<802e111c>] (skb_checksum_trimmed) from [<803a06e8>] (ipv6_mc_check_mld+0x118/0x338) [ 44.051501] [<803a06e8>] (ipv6_mc_check_mld) from [<803b2c98>] (br_multicast_rcv+0x5dc/0xd00) [ 44.060077] [<803b2c98>] (br_multicast_rcv) from [<803aa510>] (br_handle_frame_finish+0xac/0x51c) [...] Fixes: 9afd85c9 ("net: Export IGMP/MLD message validation code") Reported-by:
Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefan Wahren authored
ether_setup sets IFF_TX_SKB_SHARING but this is not supported by qca_spi as it modifies the skb on xmit. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06e (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefan Wahren authored
Currently qcaspi_netdev_setup accidentally clears IFF_BROADCAST. So fix this by keeping the flags from ether_setup. Reported-by:
Michael Heimpold <michael.heimpold@i2se.com> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06e (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Nik pointed that the VRF driver should be using skb_header_pointer instead of accessing skb->data and bits beyond directly which can be garbage. Fixes: 35402e31 ("net: Add IPv6 support to VRF device") Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Diego Viola authored
The JMC260 network card fails to suspend/resume because the call to jme_start_irq() was too early, moving the call to jme_start_irq() after the call to jme_reset_link() makes it work. Prior this change suspend/resume would fail unless /sys/power/pm_async=0 was explicitly specified. Relevant bug report: https://bugzilla.kernel.org/show_bug.cgi?id=112351Signed-off-by:
Diego Viola <diego.viola@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 24 Feb, 2016 6 commits
-
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2016-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Another small set of fixes: * stop critical protocol session on disconnect to avoid it getting stuck * wext: fix two RTNL message ordering issues * fix an uninitialized value (found by KASAN) * fix an out-of-bounds access (also found by KASAN) * clear connection keys when freeing them in all cases (IBSS, all other places already did so) * fix expected throughput unit to get consistent values * set default TX aggregation timeout to 0 in minstrel to avoid (really just hide) issues and perform better ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
The fix in 35e2d115 ("tunnels: Allow IPv6 UDP checksums to be correctly controlled.") changed behavior for bpf_set_tunnel_key() when in use with IPv6 and thus uncovered a bug that TUNNEL_CSUM needed to be set but wasn't. As a result, the stack dropped ingress vxlan IPv6 packets, that have been sent via eBPF through collect meta data mode due to checksum now being zero. Since after LCO, we enable IPv4 checksum by default, so make that analogous and only provide a flag BPF_F_ZERO_CSUM_TX for the user to turn it off in IPv4 case. Fixes: 35e2d115 ("tunnels: Allow IPv6 UDP checksums to be correctly controlled.") Fixes: c6c33454 ("bpf: support ipv6 for bpf_skb_{set,get}_tunnel_key") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
Otherwise we break the contract with GSO to only pass CHECKSUM_PARTIAL skbs down. This can easily happen with UDP+IPv4 sockets with the first MSG_MORE write smaller than the MTU, second write is a sendfile. Returning -EOPNOTSUPP lets the callers fall back into normal sendmsg path, were we calculate the checksum manually during copying. Commit d749c9cb ("ipv4: no CHECKSUM_PARTIAL on MSG_MORE corked sockets") started to exposes this bug. Fixes: d749c9cb ("ipv4: no CHECKSUM_PARTIAL on MSG_MORE corked sockets") Reported-by:
Jiri Benc <jbenc@redhat.com> Cc: Jiri Benc <jbenc@redhat.com> Reported-by:
Wakko Warner <wakko@animx.eu.org> Cc: Wakko Warner <wakko@animx.eu.org> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sebastian Frias authored
Under some circumstances, e.g. when connecting to a switch, the ethernet port will not be connected to a PHY. In that case a "fixed-link" DT node can be used to replace it. https://stackoverflow.com/questions/31046172/device-tree-for-phy-less-connection-to-a-dsa-switch This patch adds support for the "fixed-link" node to the nb8800 driver. Signed-off-by:
Sebastian Frias <sf84@laposte.net> Acked-by:
Mans Rullgard <mans@mansr.com> Cc: Mason <slash.tmp@free.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The arithmetic to zero pad the last 64-bit word in the push buffer is not correct. 1. It should be pdata + length to get to the end. 2. 'pdata' is void pointer and passing it to PTR_ALIGN() will cast the aligned pointer to void. Pass 'end' which is u64 pointer to PTR_ALIGN() instead so that the aligned pointer - 1 is the last 64-bit pointer to data. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bernie Harris authored
IPCB may contain data from previous layers (in the observed case the qdisc layer). In the observed scenario, the data was misinterpreted as ip header options, which later caused the ihl to be set to an invalid value (<5). This resulted in an infinite loop in the mips implementation of ip_fast_csum. This patch clears IPCB(skb)->opt before dst_link_failure can be called for various types of tunnels. This change only applies to encapsulated ipv4 packets. The code introduced in 11c21a30 which clears all of IPCB has been removed to be consistent with these changes, and instead the opt field is cleared unconditionally in ip_tunnel_xmit. The change in ip_tunnel_xmit applies to SIT, GRE, and IPIP tunnels. The relevant vti, l2tp, and pptp functions already contain similar code for clearing the IPCB. Signed-off-by:
Bernie Harris <bernie.harris@alliedtelesis.co.nz> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 23 Feb, 2016 5 commits
-
-
Konstantin Khlebnikov authored
Currently it's converted into msecs, thus HZ=1000 intact. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 740b0f18 ("tcp: switch rtt estimations to usec resolution") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Patrik Halfar authored
New revison of Dell Wireless 5809e Gobi 4G HSPA+ Mobile Broadband Card has new idProduct Bus 002 Device 006: ID 413c:81b3 Dell Computer Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x413c Dell Computer Corp. idProduct 0x81b3 bcdDevice 0.06 iManufacturer 1 Sierra Wireless, Incorporated iProduct 2 Dell Wireless 5809e Gobi
™ 4G HSPA+ Mobile Broadband Card iSerial 3 bNumConfigurations 2 Signed-off-by:Patrik Halfar <patrik_halfar@halfarit.cz> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arend van Spriel authored
When user-space has started a critical protocol session and a disconnect event occurs, the rdev::crit_prot_nlportid remains set. This caused a subsequent NL80211_CMD_CRIT_PROTO_START to fail (-EBUSY). Fix this by clearing the rdev attribute and call .crit_proto_stop() callback upon disconnect event. Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Ola Olsson authored
The connection keys are zeroed out in all other cases except this one. Let's fix the last one as well. Signed-off-by:
Ola Olsson <ola.olsson@sonymobile.com> Reviewed-by:
Julian Calaby <julian.calaby@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Felix Fietkau authored
The value 5000 was put here with the addition of the timeout field to ieee80211_start_tx_ba_session. It was originally added in mac80211 to save resources for drivers like iwlwifi, which only supports a limited number of concurrent aggregation sessions. Since iwlwifi does not use minstrel_ht and other drivers don't need this, 0 is a better default - especially since there have been recent reports of aggregation setup related issues reproduced with ath9k. This should improve stability without causing any adverse effects. Cc: stable@vger.kernel.org Acked-by:
Avery Pennarun <apenwarr@gmail.com> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 22 Feb, 2016 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Looks like a lot, but mostly driver fixes scattered all over as usual. Of note: 1) Add conditional sched in nf conntrack in cleanup to avoid NMI watchdogs. From Florian Westphal. 2) Fix deadlock in nfnetlink cttimeout, also from Floarian. 3) Fix handling of slaves in bonding ARP monitor validation, from Jay Vosburgh. 4) Callers of ip_cmsg_send() are responsible for freeing IP options, some were not doing so. Fix from Eric Dumazet. 5) Fix per-cpu bugs in mvneta driver, from Gregory CLEMENT. 6) Fix vlan handling in mv88e6xxx DSA driver, from Vivien Didelot. 7) bcm7xxx PHY driver bug fixes from Florian Fainelli. 8) Avoid unaligned accesses to protocol headers wrt. GRE, from Alexander Duyck. 9) SKB leaks and other problems in arc_emac driver, from Alexander Kochetkov. 10) tcp_v4_inbound_md5_hash() releases listener socket instead of request socket on error path, oops. Fix from Eric Dumazet. 11) Missing socket release in pppoe_rcv_core() that seems to have existed basically forever. From Guillaume Nault. 12) Missing slave_dev unregister in dsa_slave_create() error path, from Florian Fainelli. 13) crypto_alloc_hash() never returns NULL, fix return value check in __tcp_alloc_md5sig_pool. From Insu Yun. 14) Properly expire exception route entries in ipv4, from Xin Long. 15) Fix races in tcp/dccp listener socket dismantle, from Eric Dumazet. 16) Don't set IFF_TX_SKB_SHARING in vxlan, geneve, or GRE, it's not legal. These drivers modify the SKB on transmit. From Jiri Benc. 17) Fix regression in the initialziation of netdev->tx_queue_len. From Phil Sutter. 18) Missing unlock in tipc_nl_add_bc_link() error path, from Insu Yun. 19) SCTP port hash sizing does not properly ensure that table is a power of two in size. From Neil Horman. 20) Fix initializing of software copy of MAC address in fmvj18x_cs driver, from Ken Kawasaki" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (129 commits) bnx2x: Fix 84833 phy command handler bnx2x: Fix led setting for 84858 phy. bnx2x: Correct 84858 PHY fw version bnx2x: Fix 84833 RX CRC bnx2x: Fix link-forcing for KR2 net: ethernet: davicom: fix devicetree irq resource fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address Driver: Vmxnet3: Update Rx ring 2 max size net: netcp: rework the code for get/set sw_data in dma desc soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data net: ti: netcp: restore get/set_pad_info() functionality MAINTAINERS: Drop myself as xen netback maintainer sctp: Fix port hash table size computation can: ems_usb: Fix possible tx overflow Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb net: bcmgenet: Fix internal PHY link state af_unix: Don't use continue to re-execute unix_stream_read_generic loop unix_diag: fix incorrect sign extension in unix_lookup_by_ino bnxt_en: Failure to update PHY is not fatal condition. bnxt_en: Remove unnecessary call to update PHY settings. ...
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Two fixes headed for stable: - Remove an unnecessary speed_index lookup for thermal hook in the gpio-fan driver. The unnecessary speed lookup can hog the system. - Handle negative conversion values correctly in the ads1015 driver" * tag 'hwmon-for-linus-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook hwmon: (ads1015) Handle negative conversion values correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "One ocrdma fix: - The new CQ API support was added to ocrdma, but they got the arming logic wrong, so without this, transfers eventually fail when they fail to arm the interrupt properly under load Two related fixes for mlx4: - When we added the 64bit extended counters support to the core IB code, they forgot to update the RoCE side of the mlx4 driver (the IB side they properly updated). I debated whether or not to include these patches as they could be considered feature enablement patches, but the existing code will blindy copy the 32bit counters, whether any counters were requested at all (a bug). These two patches make it (a) check to see that counters were requested and (b) copy the right counters (the 64bit support is new, the 32bit is not). For that reason I went ahead and took them" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/mlx4: Add support for the port info class for RoCE ports IB/mlx4: Add support for extended counters over RoCE ports RDMA/ocrdma: Fix arm logic to align with new cq API
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Some bugfixes from I2C for you: A fix for a RuntimePM regression with OMAP, a fix to enable TCO for Lewisburg platforms, and a typo fix while we are here" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: Adding Intel Lewisburg support for iTCO i2c: uniphier: fix typos in error messages i2c: omap: Fix PM regression with deferred probe for pm_runtime_reinit
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.5-20160221' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-02-21 this is a pull reqeust of one patch for net/master. The patch is by Gerhard Uttenthaler and fixes a potential tx overflow in the ems_usb driver. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yuval Mintz says: ==================== bnx2x: Fix 848xx phys This series contains link-related fixes, mostly for the 848xx phys [2 patches are for 84833, and 2 patches are for 84858]. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Current initialization sequence is lacking, causing some configurations to fail. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
The phy's firmware version isn't being parsed properly as it's currently parsed like the rest of the 848xx phys. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
There's a problem in current 84833 phy configuration - in case 1Gb link is configured and jumbo-sized packets are being used, device will experience RX crc errors. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Currently, when link is using KR2 it cannot be forced to any speed other than 20g. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.om> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2016-02-20 Here's an important patch for 4.5 which fixes potential invalid pointer access when processing completed Bluetooth HCI commands. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Robert Jarzmik authored
The dm9000 driver doesn't work in at least one device-tree configuration, spitting an error message on irq resource : [ 1.062495] dm9000 8000000.ethernet: insufficient resources [ 1.068439] dm9000 8000000.ethernet: not found (-2). [ 1.073451] dm9000: probe of 8000000.ethernet failed with error -2 The reason behind is that the interrupt might be provided by a gpio controller, not probed when dm9000 is probed, and needing the probe deferral mechanism to apply. Currently, the interrupt is directly taken from resources. This patch changes this to use the more generic platform_get_irq(), which handles the deferral. Moreover, since commit Fixes: 7085a740 ("drivers: platform: parse IRQ flags from resources"), the interrupt trigger flags are honored in platform_get_irq(), so remove the needless code in dm9000. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Acked-by:
Marcel Ziswiler <marcel@ziswiler.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by:
Sergei Ianovich <ynvich@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ken Kawasaki authored
fix incorrect indexing of dev->dev_addr[] when copying the MAC address of FMV-J182 at buf[5]. Signed-off-by:
Ken Kawasaki <ken_kawasaki@nifty.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shrikrishna Khare authored
Device emulation supports max size of 4096. Signed-off-by:
Shrikrishna Khare <skhare@vmware.com> Signed-off-by:
Bhavesh Davda <bhavesh@vmware.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Murali Karicheri says: ==================== net: ti: netcp: restore get/set_pad_info() functionality This series fixes a regression and add some improvements for the ease of maintainance. Incorporated comments against v1. Changelogs: v2 : combined 2-3 into one patch as this involves a header change fixed a parse warning in 3/4 per comment from Arnd. Removed Sign-off from Arnd against 1/4 added comments in 3/3 to alert on the usage of sw data per review comments v1 : added 2-4 to accomodate feedback received from review v0 : initial version to fix the regression (From Grygorii) ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Karicheri, Muralidharan authored
SW data field in descriptor can be used by software to hold private data for the driver. As there are 4 words available for this purpose, use separate macros to place it or retrieve the same to/from descriptors. Also do type cast of data types accordingly. Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Karicheri, Muralidharan authored
Rename the pad to sw_data as per description of this field in the hardware spec(refer sprugr9 from www.ti.com). Latest version of the document is at http://www.ti.com/lit/ug/sprugr9h/sprugr9h.pdf and section 3.1 Host Packet Descriptor describes this field. Define and use a constant for the size of sw_data field similar to other fields in the struct for desc and document the sw_data field in the header. As the sw_data is not touched by hw, it's type can be changed to u32. Rename the helpers to match with the updated dma desc field sw_data. Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Karicheri, Muralidharan authored
The commit 89907779 ("netcp: try to reduce type confusion in descriptors") introduces a regression in Kernel 4.5-rc1 and it breaks get/set_pad_info() functionality. The TI NETCP driver uses pad0 and pad1 fields of knav_dma_desc to store DMA/MEM buffer pointer and buffer size respectively. And in both cases for Keystone 2 the pointer type size is 32 bit regardless of LAPE enabled or not, because CONFIG_ARCH_DMA_ADDR_T_64BIT originally is not expected to be defined. Unfortunately, above commit changed buffer's pointers save/restore code (get/set_pad_info()) and added intermediate conversation to u64 which works incorrectly on 32bit Keystone 2 and causes TI NETCP driver crash in RX/TX path due to "Unable to handle kernel NULL pointer" exception. This issue was reported and discussed in [1]. Hence, fix it by partially reverting above commit and restoring get/set_pad_info() functionality as it was before. [1] https://www.mail-archive.com/netdev@vger.kernel.org/msg95361.html Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: David Laight <David.Laight@ACULAB.COM> CC: Arnd Bergmann <arnd@arndb.de> Reported-by:
Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ian Campbell authored
Wei has been picking this up for quite a while now. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-