Group the code this way so that we can avoid too many ifdef's:

  Data only used in an SNP VM with the paravisor;
  Functions only used in an SNP VM with the paravisor;

  Data only used in an SNP VM without the paravisor;
  Functions only used in an SNP VM without the paravisor;

  Functions only used in a TDX VM, with and without the paravisor;

  Functions used in an SNP or TDX VM, when the paravisor is present;

  Functions always used, even in a regular non-CoCo VM.

No functional change.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-11-decui@microsoft.com

In ms_hyperv_init_platform(), do not distinguish between a SNP VM with
the paravisor and a SNP VM without the paravisor.

Replace hv_isolation_type_en_snp() with
!ms_hyperv.paravisor_present && hv_isolation_type_snp().

The hv_isolation_type_en_snp() in drivers/hv/hv.c and
drivers/hv/hv_common.c can be changed to hv_isolation_type_snp() since
we know !ms_hyperv.paravisor_present is true there.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-10-decui@microsoft.com

When the paravisor is present, a SNP VM must use GHCB to access some
special MSRs, including HV_X64_MSR_GUEST_OS_ID and some SynIC MSRs.

Similarly, when the paravisor is present, a TDX VM must use TDX GHCI
to access the same MSRs.

Implement hv_tdx_msr_write() and hv_tdx_msr_read(), and use the helper
functions hv_ivm_msr_read() and hv_ivm_msr_write() to access the MSRs
in a unified way for SNP/TDX VMs with the paravisor.

Do not export hv_tdx_msr_write() and hv_tdx_msr_read(), because we never
really used hv_ghcb_msr_write() and hv_ghcb_msr_read() in any module.

Update arch/x86/include/asm/mshyperv.h so that the kernel can still build
if CONFIG_AMD_MEM_ENCRYPT or CONFIG_INTEL_TDX_GUEST is not set, or
neither is set.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-9-decui@microsoft.com

The post_msg_page was removed in
commit 9a6b1a17 ("Drivers: hv: vmbus: Remove the per-CPU post_msg_page")

However, it turns out that we need to bring it back, but only for a TDX VM
with the paravisor: in such a VM, the hyperv_pcpu_input_arg is not decrypted,
but the HVCALL_POST_MESSAGE in such a VM needs a decrypted page as the
hypercall input page: see the comments in hyperv_init() for a detailed
explanation.

Except for HVCALL_POST_MESSAGE and HVCALL_SIGNAL_EVENT, the other hypercalls
in a TDX VM with the paravisor still use hv_hypercall_pg and must use the
hyperv_pcpu_input_arg (which is encrypted in such a VM), when a hypercall
input page is used.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-8-decui@microsoft.com

The new variable hyperv_paravisor_present is set only when the VM
is a SNP/TDX VM with the paravisor running: see ms_hyperv_init_platform().

We introduce hyperv_paravisor_present because we can not use
ms_hyperv.paravisor_present in arch/x86/include/asm/mshyperv.h:

struct ms_hyperv_info is defined in include/asm-generic/mshyperv.h, which
is included at the end of arch/x86/include/asm/mshyperv.h, but at the
beginning of arch/x86/include/asm/mshyperv.h, we would already need to use
struct ms_hyperv_info in hv_do_hypercall().

We use hyperv_paravisor_present only in include/asm-generic/mshyperv.h,
and use ms_hyperv.paravisor_present elsewhere. In the future, we'll
introduce a hypercall function structure for different VM types, and
at boot time, the right function pointers would be written into the
structure so that runtime testing of TDX vs. SNP vs. normal will be
avoided and hyperv_paravisor_present will no longer be needed.

Call hv_vtom_init() when it's a VBS VM or when ms_hyperv.paravisor_present
is true, i.e. the VM is a SNP VM or TDX VM with the paravisor.

Enhance hv_vtom_init() for a TDX VM with the paravisor.

In hv_common_cpu_init(), don't decrypt the hyperv_pcpu_input_arg
for a TDX VM with the paravisor, just like we don't decrypt the page
for a SNP VM with the paravisor.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-7-decui@microsoft.com

Don't set *this_cpu_ptr(hyperv_pcpu_input_arg) before the function
set_memory_decrypted() returns, otherwise we run into this ticky issue:

For a fully enlightened TDX/SNP VM, in hv_common_cpu_init(),
*this_cpu_ptr(hyperv_pcpu_input_arg) is an encrypted page before
the set_memory_decrypted() returns.

When such a VM has more than 64 VPs, if the hyperv_pcpu_input_arg is not
NULL, hv_common_cpu_init() -> set_memory_decrypted() -> ... ->
cpa_flush() -> on_each_cpu() -> ... -> hv_send_ipi_mask() -> ... ->
__send_ipi_mask_ex() tries to call hv_do_rep_hypercall() with the
hyperv_pcpu_input_arg as the hypercall input page, which must be a
decrypted page in such a VM, but the page is still encrypted at this
point, and a fatal fault is triggered.

Fix the issue by setting *this_cpu_ptr(hyperv_pcpu_input_arg) after
set_memory_decrypted(): if the hyperv_pcpu_input_arg is NULL,
__send_ipi_mask_ex() returns HV_STATUS_INVALID_PARAMETER immediately,
and hv_send_ipi_mask() falls back to orig_apic.send_IPI_mask(),
which can use x2apic_send_IPI_all(), which may be slightly slower than
the hypercall but still works correctly in such a VM.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-6-decui@microsoft.com

When a fully enlightened TDX guest runs on Hyper-V, the UEFI firmware sets
the HW_REDUCED flag and consequently ttyS0 interrupts can't work. Fix the
issue by overriding x86_init.acpi.reduced_hw_early_init().
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-5-decui@microsoft.com

Add Hyper-V specific code so that a fully enlightened TDX guest (i.e.
without the paravisor) can run on Hyper-V:
  Don't use hv_vp_assist_page. Use GHCI instead.
  Don't try to use the unsupported HV_REGISTER_CRASH_CTL.
  Don't trust (use) Hyper-V's TLB-flushing hypercalls.
  Don't use lazy EOI.
  Share the SynIC Event/Message pages with the hypervisor.
  Don't use the Hyper-V TSC page for now, because non-trivial work is
    required to share the page with the hypervisor.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-4-decui@microsoft.com

A fully enlightened TDX guest on Hyper-V (i.e. without the paravisor) only
uses the GHCI call rather than hv_hypercall_pg. Do not initialize
hypercall_pg for such a guest.

In hv_common_cpu_init(), the hyperv_pcpu_input_arg page needs to be
decrypted in such a guest.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-3-decui@microsoft.com

No logic change to SNP/VBS guests.

hv_isolation_type_tdx() will be used to instruct a TDX guest on Hyper-V to
do some TDX-specific operations, e.g. for a fully enlightened TDX guest
(i.e. without the paravisor), hv_do_hypercall() should use
__tdx_hypercall() and such a guest on Hyper-V should handle the Hyper-V
Event/Message/Monitor pages specially.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-2-decui@microsoft.com

When CONFIG_HYPERV is not set, arch/x86/hyperv/ivm.c is not built (see
arch/x86/Kbuild), so 'isolation_type_en_snp' in the ivm.c is not defined,
and this failure happens:

ld: arch/x86/kernel/cpu/mshyperv.o: in function `ms_hyperv_init_platform':
arch/x86/kernel/cpu/mshyperv.c:417: undefined reference to `isolation_type_en_snp'

Fix the failure by testing hv_get_isolation_type() and
ms_hyperv.paravisor_present for a fully enlightened SNP VM: when
CONFIG_HYPERV is not set, hv_get_isolation_type() is defined as a
static inline function that always returns HV_ISOLATION_TYPE_NONE
(see include/asm-generic/mshyperv.h), so the compiler won't generate any
code for the ms_hyperv.paravisor_present and static_branch_enable().
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Closes: https://lore.kernel.org/lkml/b4979997-23b9-0c43-574e-e4a3506500ff@amd.com/
Fixes: d6e2d652 ("x86/hyperv: Add sev-snp enlightened guest static key")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230823032008.18186-1-decui@microsoft.com

When building without CONFIG_AMD_MEM_ENCRYPT, there are several
repeated instances of -Wunused-function due to missing 'inline' on
the stub of hy_snp_boot_ap():

  In file included from drivers/hv/hv_common.c:29:
  ./arch/x86/include/asm/mshyperv.h:272:12: error: 'hv_snp_boot_ap' defined but not used [-Werror=unused-function]
    272 | static int hv_snp_boot_ap(int cpu, unsigned long start_ip) { return 0; }
        |            ^~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

Add 'inline' to fix the warnings.

Fixes: 44676bb9 ("x86/hyperv: Add smp support for SEV-SNP guest")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230822-hv_snp_boot_ap-missing-inline-v1-1-e712dcb2da0f@kernel.org

One-element and zero-length arrays are deprecated. Replace one-element
array in struct vmtransfer_page_packet_header with flexible-array
member. This change fixes below warning:

[    2.593788] ================================================================================
[    2.593908] UBSAN: array-index-out-of-bounds in drivers/net/hyperv/netvsc.c:1445:41
[    2.593989] index 1 is out of range for type 'vmtransfer_page_range [1]'
[    2.594049] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.5.0-rc4-next-20230803+ #1
[    2.594114] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 04/20/2023
[    2.594121] Call Trace:
[    2.594126]  <IRQ>
[    2.594133]  dump_stack_lvl+0x4c/0x70
[    2.594154]  dump_stack+0x14/0x20
[    2.594162]  __ubsan_handle_out_of_bounds+0xa6/0xf0
[    2.594224]  netvsc_poll+0xc01/0xc90 [hv_netvsc]
[    2.594258]  __napi_poll+0x30/0x1e0
[    2.594320]  net_rx_action+0x194/0x2f0
[    2.594333]  __do_softirq+0xde/0x31e
[    2.594345]  __irq_exit_rcu+0x6b/0x90
[    2.594357]  irq_exit_rcu+0x12/0x20
[    2.594366]  sysvec_hyperv_callback+0x84/0x90
[    2.594376]  </IRQ>
[    2.594379]  <TASK>
[    2.594383]  asm_sysvec_hyperv_callback+0x1f/0x30
[    2.594394] RIP: 0010:pv_native_safe_halt+0xf/0x20
[    2.594452] Code: 0b 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 05 35 3f 00 fb f4 <c3> cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90 90 90 90
[    2.594459] RSP: 0018:ffffb841c00d3e88 EFLAGS: 00000256
[    2.594469] RAX: ffff9d18c326f4a0 RBX: ffff9d18c031df40 RCX: 4000000000000000
[    2.594475] RDX: 0000000000000001 RSI: 0000000000000082 RDI: 00000000000268dc
[    2.594481] RBP: ffffb841c00d3e90 R08: 00000066a171109b R09: 00000000d33d2600
[    2.594486] R10: 000000009a41bf00 R11: 0000000000000000 R12: 0000000000000001
[    2.594491] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[    2.594501]  ? ct_kernel_exit.constprop.0+0x7d/0x90
[    2.594513]  ? default_idle+0xd/0x20
[    2.594523]  arch_cpu_idle+0xd/0x20
[    2.594532]  default_idle_call+0x30/0xe0
[    2.594542]  do_idle+0x200/0x240
[    2.594553]  ? complete+0x71/0x80
[    2.594613]  cpu_startup_entry+0x24/0x30
[    2.594624]  start_secondary+0x12d/0x160
[    2.594634]  secondary_startup_64_no_verify+0x17e/0x18b
[    2.594649]  </TASK>
[    2.594656] ================================================================================

With this change the structure size is reduced by 8 bytes, below is the
pahole output.

struct vmtransfer_page_packet_header {
	struct vmpacket_descriptor d;                    /*     0    16 */
	u16                        xfer_pageset_id;      /*    16     2 */
	u8                         sender_owns_set;      /*    18     1 */
	u8                         reserved;             /*    19     1 */
	u32                        range_cnt;            /*    20     4 */
	struct vmtransfer_page_range ranges[];           /*    24     0 */

	/* size: 24, cachelines: 1, members: 6 */
	/* last cacheline: 24 bytes */
};

The validation code in the netvsc driver is affected by changing the
struct size, but the effects have been examined and have been determined
to be appropriate.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1692160478-18469-1-git-send-email-ssengar@linux.microsoft.com

Since the commit referenced in the Fixes: tag below the VMBus client driver
is walking the ACPI namespace up from the VMBus ACPI device to the ACPI
namespace root object trying to find Hyper-V MMIO ranges.

However, if it is not able to find them it ends trying to walk resources of
the ACPI namespace root object itself.
This object has all-ones handle, which causes a NULL pointer dereference
in the ACPI code (from dereferencing this pointer with an offset).

This in turn causes an oops on boot with VMBus host implementations that do
not provide Hyper-V MMIO ranges in their VMBus ACPI device or its
ancestors.
The QEMU VMBus implementation is an example of such implementation.

I guess providing these ranges is optional, since all tested Windows
versions seem to be able to use VMBus devices without them.

Fix this by explicitly terminating the lookup at the ACPI namespace root
object.

Note that Linux guests under KVM/QEMU do not use the Hyper-V PV interface
by default - they only do so if the KVM PV interface is missing or
disabled.

Example stack trace of such oops:
[ 3.710827] ? __die+0x1f/0x60
[ 3.715030] ? page_fault_oops+0x159/0x460
[ 3.716008] ? exc_page_fault+0x73/0x170
[ 3.716959] ? asm_exc_page_fault+0x22/0x30
[ 3.717957] ? acpi_ns_lookup+0x7a/0x4b0
[ 3.718898] ? acpi_ns_internalize_name+0x79/0xc0
[ 3.720018] acpi_ns_get_node_unlocked+0xb5/0xe0
[ 3.721120] ? acpi_ns_check_object_type+0xfe/0x200
[ 3.722285] ? acpi_rs_convert_aml_to_resource+0x37/0x6e0
[ 3.723559] ? down_timeout+0x3a/0x60
[ 3.724455] ? acpi_ns_get_node+0x3a/0x60
[ 3.725412] acpi_ns_get_node+0x3a/0x60
[ 3.726335] acpi_ns_evaluate+0x1c3/0x2c0
[ 3.727295] acpi_ut_evaluate_object+0x64/0x1b0
[ 3.728400] acpi_rs_get_method_data+0x2b/0x70
[ 3.729476] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.730940] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.732411] acpi_walk_resources+0x78/0xd0
[ 3.733398] vmbus_platform_driver_probe+0x9f/0x1d0 [hv_vmbus]
[ 3.734802] platform_probe+0x3d/0x90
[ 3.735684] really_probe+0x19b/0x400
[ 3.736570] ? __device_attach_driver+0x100/0x100
[ 3.737697] __driver_probe_device+0x78/0x160
[ 3.738746] driver_probe_device+0x1f/0x90
[ 3.739743] __driver_attach+0xc2/0x1b0
[ 3.740671] bus_for_each_dev+0x70/0xc0
[ 3.741601] bus_add_driver+0x10e/0x210
[ 3.742527] driver_register+0x55/0xf0
[ 3.744412] ? 0xffffffffc039a000
[ 3.745207] hv_acpi_init+0x3c/0x1000 [hv_vmbus]

Fixes: 7f163a6f ("drivers:hv: Modify hv_vmbus to search for all MMIO ranges available.")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/fd8e64ceeecfd1d95ff49021080cf699e88dbbde.1691606267.git.maciej.szmigiero@oracle.com

Add Hyperv-specific handling for faults caused by VMMCALL
instructions.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-9-ltykernel@gmail.com

In the AMD SEV-SNP guest, AP needs to be started up via sev es
save area and Hyper-V requires to call HVCALL_START_VP hypercall
to pass the gpa of sev es save area with AP's vp index and VTL(Virtual
trust level) parameters. Override wakeup_secondary_cpu_64 callback
with hv_snp_boot_ap.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-8-ltykernel@gmail.com

Hyper-V tsc page is shared with hypervisor and mark the page
unencrypted in sev-snp enlightened guest when it's used.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-7-ltykernel@gmail.com

In sev-snp enlightened guest, Hyper-V hypercall needs
to use vmmcall to trigger vmexit and notify hypervisor
to handle hypercall request.
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-6-ltykernel@gmail.com

Hypervisor needs to access input arg, VMBus synic event and
message pages. Mark these pages unencrypted in the SEV-SNP
guest and free them only if they have been marked encrypted
successfully.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-5-ltykernel@gmail.com

hv vp assist page needs to be shared between SEV-SNP guest and Hyper-V.
So mark the page unencrypted in the SEV-SNP guest.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-4-ltykernel@gmail.com

SEV-SNP guests on Hyper-V can run at multiple Virtual Trust
Levels (VTL).  During boot, get the VTL at which we're running
using the GET_VP_REGISTERs hypercall, and save the value
for future use.  Then during VMBus initialization, set the VTL
with the saved value as required in the VMBus init message.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-3-ltykernel@gmail.com

Introduce static key isolation_type_en_snp for enlightened
sev-snp guest check.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-2-ltykernel@gmail.com

This patch is intended as a proof-of-concept for the new SBRM
machinery[1]. For some brief background, the idea behind SBRM is using
the __cleanup__ attribute to automatically unlock locks (or otherwise
release resources) when they go out of scope, similar to C++ style RAII.
This promises some benefits such as making code simpler (particularly
where you have lots of goto fail; type constructs) as well as reducing
the surface area for certain kinds of bugs.

The changes in this patch should not result in any difference in how the
code actually runs (i.e., it's purely an exercise in this new syntax
sugar). In one instance SBRM was not appropriate, so I left that part
alone, but all other locking/unlocking is handled automatically in this
patch.

[1] https://lore.kernel.org/all/20230626125726.GU4253@hirez.programming.kicks-ass.net/Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: "Mitchell Levy (Microsoft)" <levymitchell0@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230807-sbrm-hyperv-v2-1-9d2ac15305bd@gmail.com

Pull spi fixes from Mark Brown:
 "A bunch of fixes for the Qualcomm QSPI driver, fixing multiple issues
  with the newly added DMA mode - it had a number of issues exposed when
  tested in a wider range of use cases, both race condition style issues
  and issues with different inputs to those that had been used in test"

* tag 'spi-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-qcom-qspi: Add mem_ops to avoid PIO for badly sized reads
  spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytes
  spi: spi-qcom-qspi: Add DMA_CHAIN_DONE to ALL_IRQS
  spi: spi-qcom-qspi: Call dma_wmb() after setting up descriptors
  spi: spi-qcom-qspi: Use GFP_ATOMIC flag while allocating for descriptor
  spi: spi-qcom-qspi: Ignore disabled interrupts' status in isr

Merge tag 'regulator-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A couple of small fixes for the the mt6358 driver, fixing error
  reporting and a bootstrapping issue"

* tag 'regulator-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: mt6358: Fix incorrect VCN33 sync error message
  regulator: mt6358: Sync VCN33_* enable status after checking ID

Pull USB fixes from Greg KH:
 "Here are a set of USB driver fixes for 6.5-rc4. Include in here are:

   - new USB serial device ids

   - dwc3 driver fixes for reported issues

   - typec driver fixes for reported problems

   - gadget driver fixes

   - reverts of some problematic USB changes that went into -rc1

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
  usb: misc: ehset: fix wrong if condition
  usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy
  usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config
  usb: gadget: call usb_gadget_check_config() to verify UDC capability
  usb: typec: Use sysfs_emit_at when concatenating the string
  usb: typec: Iterate pds array when showing the pd list
  usb: typec: Set port->pd before adding device for typec_port
  usb: typec: qcom: fix return value check in qcom_pmic_typec_probe()
  Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()"
  Revert "usb: xhci: tegra: Fix error check"
  USB: gadget: Fix the memory leak in raw_gadget driver
  usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate
  Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"
  Revert "xhci: add quirk for host controllers that don't update endpoint DCS"
  USB: quirks: add quirk for Focusrite Scarlett
  usb: xhci-mtk: set the dma max_seg_size
  MAINTAINERS: drop invalid usb/cdns3 Reviewer e-mail
  usb: dwc3: don't reset device side if dwc3 was configured as host-only
  usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ucsi_unregister_partner()
  usb: ohci-at91: Fix the unhandle interrupt when resume
  ...

Pull tty/serial fixes from Greg KH:
 "Here are some small TTY and serial driver fixes for 6.5-rc4 for some
  reported problems. Included in here is:

   - TIOCSTI fix for braille readers

   - documentation fix for minor numbers

   - MAINTAINERS update for new serial files in -rc1

   - minor serial driver fixes for reported problems

  All of these have been in linux-next with no reported problems"

* tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_dw: Preserve original value of DLF register
  tty: serial: sh-sci: Fix sleeping in atomic context
  serial: sifive: Fix sifive_serial_console_setup() section
  Documentation: devices.txt: reconcile serial/ucc_uart minor numers
  MAINTAINERS: Update TTY layer for lists and recently added files
  tty: n_gsm: fix UAF in gsm_cleanup_mux
  TIOCSTI: always enable for CAP_SYS_ADMIN

Pull staging driver fixes from Greg KH:
 "Here are three small staging driver fixes for 6.5-rc4 that resolve
  some reported problems. These fixes are:

   - fix for an old bug in the r8712 driver

   - fbtft driver fix for a spi device

   - potential overflow fix in the ks7010 driver

  All of these have been in linux-next with no reported problems"

* tag 'staging-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()
  staging: fbtft: ili9341: use macro FBTFT_REGISTER_SPI_DRIVER
  staging: r8712: Fix memory leak in _r8712_init_xmit_priv()

Pull char driver and Documentation fixes from Greg KH:
 "Here is a char driver fix and some documentation updates for 6.5-rc4
  that contain the following changes:

   - sram/genalloc bugfix for reported problem

   - security-bugs.rst update based on recent discussions

   - embargoed-hardware-issues minor cleanups and then partial revert
     for the project/company lists

  All of these have been in linux-next for a while with no reported
  problems, and the documentation updates have all been reviewed by the
  relevant developers"

* tag 'char-misc-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc/genalloc: Name subpools by of_node_full_name()
  Documentation: embargoed-hardware-issues.rst: add AMD to the list
  Documentation: embargoed-hardware-issues.rst: clean out empty and unused entries
  Documentation: security-bugs.rst: clarify CVE handling
  Documentation: security-bugs.rst: update preferences when dealing with the linux-distros group

Merge tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probe fixes from Masami Hiramatsu:

 - probe-events: add NULL check for some BTF API calls which can return
   error code and NULL.

 - ftrace selftests: check fprobe and kprobe event correctly. This fixes
   a miss condition of the test command.

 - kprobes: do not allow probing functions that start with "__cfi_" or
   "__pfx_" since those are auto generated for kernel CFI and not
   executed.

* tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kprobes: Prohibit probing on CFI preamble symbol
  selftests/ftrace: Fix to check fprobe event eneblement
  tracing/probes: Fix to add NULL check for BTF APIs

Pull kvm fixes from Paolo Bonzini:
 "x86:

   - Do not register IRQ bypass consumer if posted interrupts not
     supported

   - Fix missed device interrupt due to non-atomic update of IRR

   - Use GFP_KERNEL_ACCOUNT for pid_table in ipiv

   - Make VMREAD error path play nice with noinstr

   - x86: Acquire SRCU read lock when handling fastpath MSR writes

   - Support linking rseq tests statically against glibc 2.35+

   - Fix reference count for stats file descriptors

   - Detect userspace setting invalid CR0

  Non-KVM:

   - Remove coccinelle script that has caused multiple confusion
     ("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE()
     usage", acked by Greg)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
  KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
  KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
  KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
  Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
  KVM: selftests: Verify stats fd is usable after VM fd has been closed
  KVM: selftests: Verify stats fd can be dup()'d and read
  KVM: selftests: Verify userspace can create "redundant" binary stats files
  KVM: selftests: Explicitly free vcpus array in binary stats test
  KVM: selftests: Clean up stats fd in common stats_test() helper
  KVM: selftests: Use pread() to read binary stats header
  KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
  selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
  Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
  KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
  KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
  KVM: VMX: Make VMREAD error path play nice with noinstr
  KVM: x86/irq: Conditionally register IRQ bypass consumer again
  KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
  KVM: x86: check the kvm_cpu_get_interrupt result before using it
  KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
  ...

Pull locking fix from Borislav Petkov:

 - Fix a rtmutex race condition resulting from sharing of the sort key
   between the lock waiters and the PI chain tree (->pi_waiters) of a
   task by giving each tree their own sort key

* tag 'locking_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Fix task->pi_waiters integrity

Pull x86 fixes from Borislav Petkov:

 - AMD's automatic IBRS doesn't enable cross-thread branch target
   injection protection (STIBP) for user processes. Enable STIBP on such
   systems.

 - Do not delete (but put the ref instead) of AMD MCE error thresholding
   sysfs kobjects when destroying them in order not to delete the kernfs
   pointer prematurely

 - Restore annotation in ret_from_fork_asm() in order to fix kthread
   stack unwinding from being marked as unreliable and thus breaking
   livepatching

* tag 'x86_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Enable STIBP on AMD if Automatic IBRS is enabled
  x86/MCE/AMD: Decrement threshold_bank refcount when removing threshold blocks
  x86: Fix kthread unwind

Pull irq fixes from Borislav Petkov:

 - Work around an erratum on GIC700, where a race between a CPU handling
   a wake-up interrupt, a change of affinity, and another CPU going to
   sleep can result in a lack of wake-up event on the next interrupt

 - Fix the locking required on a VPE for GICv4

 - Enable Rockchip 3588001 erratum workaround for RK3588S

 - Fix the irq-bcm6345-l1 assumtions of the boot CPU always be the first
   CPU in the system

* tag 'irq_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3: Workaround for GIC-700 erratum 2941627
  irqchip/gic-v3: Enable Rockchip 3588001 erratum workaround for RK3588S
  irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidation
  irq-bcm6345-l1: Do not assume a fixed block to cpu mapping

Pull smb client fixes from Steve French:
 "Four small SMB3 client fixes:

   - two reconnect fixes (to address the case where non-default
     iocharset gets incorrectly overridden at reconnect with the
     default charset)

   - fix for NTLMSSP_AUTH request setting a flag incorrectly)

   - Add missing check for invalid tlink (tree connection) in ioctl"

* tag '6.5-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add missing return value check for cifs_sb_tlink
  smb3: do not set NTLMSSP_VERSION flag for negotiate not auth request
  cifs: fix charset issue in reconnection
  fs/nls: make load_nls() take a const parameter

Pull tracing fixes from Steven Rostedt:

 - Fix to /sys/kernel/tracing/per_cpu/cpu*/stats read and entries.

   If a resize shrinks the buffer it clears the read count to notify
   readers that they need to reset. But the read count is also used for
   accounting and this causes the numbers to be off. Instead, create a
   separate variable to use to notify readers to reset.

 - Fix the ref counts of the "soft disable" mode. The wrong value was
   used for testing if soft disable mode should be enabled or disable,
   but instead, just change the logic to do the enable and disable in
   place when the SOFT_MODE is set or cleared.

 - Several kernel-doc fixes

 - Removal of unused external declarations

* tag 'trace-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix warning in trace_buffered_event_disable()
  ftrace: Remove unused extern declarations
  tracing: Fix kernel-doc warnings in trace_seq.c
  tracing: Fix kernel-doc warnings in trace_events_trigger.c
  tracing/synthetic: Fix kernel-doc warnings in trace_events_synth.c
  ring-buffer: Fix kernel-doc warnings in ring_buffer.c
  ring-buffer: Fix wrong stat of cpu_buffer->read

Commit a2225d93 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.

Get rid of it mechanically:

   git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
       xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'

Also just remove the AUTOFS4_FS config option stub.  Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'loongarch-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Some bug fixes for build system, builtin cmdline handling, bpf and
  {copy, clear}_user, together with a trivial cleanup"

* tag 'loongarch-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Cleanup __builtin_constant_p() checking for cpu_has_*
  LoongArch: BPF: Fix check condition to call lu32id in move_imm()
  LoongArch: BPF: Enable bpf_probe_read{, str}() on LoongArch
  LoongArch: Fix return value underflow in exception path
  LoongArch: Fix CMDLINE_EXTEND and CMDLINE_BOOTLOADER handling
  LoongArch: Fix module relocation error with binutils 2.41
  LoongArch: Only fiddle with CHECKFLAGS if `need-compiler'

Add coverage to x86's set_sregs_test to verify KVM rejects vendor-agnostic
illegal CR0 values, i.e. CR0 values whose legality doesn't depend on the
current VMX mode.  KVM historically has neglected to reject bad CR0s from
userspace, i.e. would happily accept a completely bogus CR0 via
KVM_SET_SREGS{2}.

Punt VMX specific subtests to future work, as they would require quite a
bit more effort, and KVM gets coverage for CR0 checks in general through
other means, e.g. KVM-Unit-Tests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>