- 14 Nov, 2014 40 commits
-
-
Peter Zijlstra authored
commit 211de6eb upstream. The idiot who did 4a1c0f26 ("perf: Fix lockdep warning on process exit") forgot to pay attention and fix all similar cases. Do so now. In particular, unclone_ctx() must be called while holding ctx->lock, therefore all such sites are broken for the same reason. Pull the put_ctx() call out from under ctx->lock. Reported-by:
Sasha Levin <sasha.levin@oracle.com> Probably-also-reported-by:
Vince Weaver <vincent.weaver@maine.edu> Fixes: 4a1c0f26 ("perf: Fix lockdep warning on process exit") Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Cong Wang <cwang@twopensource.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140930172308.GI4241@worktop.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Oleg Nesterov authored
commit 66463db4 upstream. save_xstate_sig()->drop_init_fpu() doesn't look right. setup_rt_frame() can fail after that, in this case the next setup_rt_frame() triggered by SIGSEGV won't save fpu simply because the old state was lost. This obviously mean that fpu won't be restored after sys_rt_sigreturn() from SIGSEGV handler. Shift drop_init_fpu() into !failed branch in handle_signal(). Test-case (needs -O2): #include <stdio.h> #include <signal.h> #include <unistd.h> #include <sys/syscall.h> #include <sys/mman.h> #include <pthread.h> #include <assert.h> volatile double D; void test(double d) { int pid = getpid(); for (D = d; D == d; ) { /* sys_tkill(pid, SIGHUP); asm to avoid save/reload * fp regs around "C" call */ asm ("" : : "a"(200), "D"(pid), "S"(1)); asm ("syscall" : : : "ax"); } printf("ERR!!\n"); } void sigh(int sig) { } char altstack[4096 * 10] __attribute__((aligned(4096))); void *tfunc(void *arg) { for (;;) { mprotect(altstack, sizeof(altstack), PROT_READ); mprotect(altstack, sizeof(altstack), PROT_READ|PROT_WRITE); } } int main(void) { stack_t st = { .ss_sp = altstack, .ss_size = sizeof(altstack), .ss_flags = SS_ONSTACK, }; struct sigaction sa = { .sa_handler = sigh, }; pthread_t pt; sigaction(SIGSEGV, &sa, NULL); sigaltstack(&st, NULL); sa.sa_flags = SA_ONSTACK; sigaction(SIGHUP, &sa, NULL); pthread_create(&pt, NULL, tfunc, NULL); test(123.456); return 0; } Reported-by:
Bean Anderson <bean@azulsystems.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/20140902175713.GA21646@redhat.comSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Oleg Nesterov authored
commit df24fb85 upstream. Add preempt_disable() + preempt_enable() around math_state_restore() in __restore_xstate_sig(). Otherwise __switch_to() after __thread_fpu_begin() can overwrite fpu->state we are going to restore. Signed-off-by:
Suresh Siddha <sbsiddha@gmail.com> Signed-off-by:
-
Ben Hutchings authored
commit 0e6d3112 upstream. It is currently possible to execve() an x32 executable on an x86_64 kernel that has only ia32 compat enabled. However all its syscalls will fail, even _exit(). This usually causes it to segfault. Change the ELF compat architecture check so that x32 executables are rejected if we don't support the x32 ABI. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Link: http://lkml.kernel.org/r/1410120305.6822.9.camel@decadent.org.ukSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Artem Bityutskiy authored
commit ba29e721 upstream. Hu (hujianyang <hujianyang@huawei.com>) discovered an issue in the 'empty_log_bytes()' function, which calculates how many bytes are left in the log: " If 'c->lhead_lnum + 1 == c->ltail_lnum' and 'c->lhead_offs == c->leb_size', 'h' would equalent to 't' and 'empty_log_bytes()' would return 'c->log_bytes' instead of 0. " At this point it is not clear what would be the consequences of this, and whether this may lead to any problems, but this patch addresses the issue just in case. Tested-by:
hujianyang <hujianyang@huawei.com> Reported-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Artem Bityutskiy authored
commit 052c2807 upstream. Hu (hujianyang@huawei.com) discovered a race condition which may lead to a situation when UBIFS is unable to mount the file-system after an unclean reboot. The problem is theoretical, though. In UBIFS, we have the log, which basically a set of LEBs in a certain area. The log has the tail and the head. Every time user writes data to the file-system, the UBIFS journal grows, and the log grows as well, because we append new reference nodes to the head of the log. So the head moves forward all the time, while the log tail stays at the same position. At any time, the UBIFS master node points to the tail of the log. When we mount the file-system, we scan the log, and we always start from its tail, because this is where the master node points to. The only occasion when the tail of the log changes is the commit operation. The commit operation has 2 phases - "commit start" and "commit end". The former is relatively short, and does not involve much I/O. During this phase we mostly just build various in-memory lists of the things which have to be written to the flash media during "commit end" phase. During the commit start phase, what we do is we "clean" the log. Indeed, the commit operation will index all the data in the journal, so the entire journal "disappears", and therefore the data in the log become unneeded. So we just move the head of the log to the next LEB, and write the CS node there. This LEB will be the tail of the new log when the commit operation finishes. When the "commit start" phase finishes, users may write more data to the file-system, in parallel with the ongoing "commit end" operation. At this point the log tail was not changed yet, it is the same as it had been before we started the commit. The log head keeps moving forward, though. The commit operation now needs to write the new master node, and the new master node should point to the new log tail. After this the LEBs between the old log tail and the new log tail can be unmapped and re-used again. And here is the possible problem. We do 2 operations: (a) We first update the log tail position in memory (see 'ubifs_log_end_commit()'). (b) And then we write the master node (see the big lock of code in 'do_commit()'). But nothing prevents the log head from moving forward between (a) and (b), and the log head may "wrap" now to the old log tail. And when the "wrap" happens, the contends of the log tail gets erased. Now a power cut happens and we are in trouble. We end up with the old master node pointing to the old tail, which was erased. And replay fails because it expects the master node to point to the correct log tail at all times. This patch merges the abovementioned (a) and (b) operations by moving the master node change code to the 'ubifs_log_end_commit()' function, so that it runs with the log mutex locked, which will prevent the log from being changed benween operations (a) and (b). Reported-by:
-
Artem Bityutskiy authored
commit 07e19dff upstream. The 'mst_mutex' is not needed since because 'ubifs_write_master()' is only called on the mount path and commit path. The mount path is sequential and there is no parallelism, and the commit path is also serialized - there is only one commit going on at a time. Signed-off-by:
-
Tetsuo Handa authored
commit 475d0db7 upstream. total_objects could be 0 and is used as a denom. While total_objects is a "long", total_objects == 0 unlikely happens for 3.12 and later kernels because 32-bit architectures would not be able to hold (1 << 32) objects. However, total_objects == 0 may happen for kernels between 3.1 and 3.11 because total_objects in prune_super() was an "int" and (e.g.) x86_64 architecture might be able to hold (1 << 32) objects. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Mikulas Patocka authored
commit c2ca0fcd upstream. This patch makes it possible to kill a process looping in cont_expand_zero. A process may spend a lot of time in this function, so it is desirable to be able to kill it. It happened to me that I wanted to copy a piece data from the disk to a file. By mistake, I used the "seek" parameter to dd instead of "skip". Due to the "seek" parameter, dd attempted to extend the file and became stuck doing so - the only possibility was to reset the machine or wait many hours until the filesystem runs out of space and cont_expand_zero fails. We need this patch to be able to terminate the process. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
commit 221414db upstream. Runtime Power Management handling for the sdhci_add_host() failure case in sdhci_s3c_probe() should match the code in sdhci_s3c_remove() (which uses pm_runtime_disable() call which matches the earlier pm_runtime_enable() one). Fix it. This patch fixes "BUG: spinlock bad magic on CPU#0, swapper/0/1" and "Unbalanced pm_runtime_enable!" warnings. >From the kernel log: ... [ 1.659631] s3c-sdhci 12530000.sdhci: sdhci_add_host() failed [ 1.665096] BUG: spinlock bad magic on CPU#0, swapper/0/1 [ 1.670433] lock: 0xea01e484, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 1.677895] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-next-20140804-00008-ga59480f-dirty #707 [ 1.687037] [<c0013ae4>] (unwind_backtrace) from [<c0010d70>] (show_stack+0x10/0x14) [ 1.694740] [<c0010d70>] (show_stack) from [<c04050c8>] (dump_stack+0x68/0xb8) [ 1.701948] [<c04050c8>] (dump_stack) from [<c0052558>] (do_raw_spin_lock+0x15c/0x1a4) [ 1.709848] [<c0052558>] (do_raw_spin_lock) from [<c040a630>] (_raw_spin_lock_irqsave+0x20/0x28) [ 1.718619] [<c040a630>] (_raw_spin_lock_irqsave) from [<c030d7d0>] (sdhci_do_set_ios+0x1c/0x5cc) [ 1.727464] [<c030d7d0>] (sdhci_do_set_ios) from [<c030ddfc>] (sdhci_runtime_resume_host+0x50/0x104) [ 1.736574] [<c030ddfc>] (sdhci_runtime_resume_host) from [<c02462dc>] (pm_generic_runtime_resume+0x2c/0x40) [ 1.746383] [<c02462dc>] (pm_generic_runtime_resume) from [<c0247898>] (__rpm_callback+0x34/0x70) [ 1.755233] [<c0247898>] (__rpm_callback) from [<c02478fc>] (rpm_callback+0x28/0x88) [ 1.762958] [<c02478fc>] (rpm_callback) from [<c02486f0>] (rpm_resume+0x384/0x4ec) [ 1.770511] [<c02486f0>] (rpm_resume) from [<c02488b0>] (pm_runtime_forbid+0x58/0x64) [ 1.778325] [<c02488b0>] (pm_runtime_forbid) from [<c030ea70>] (sdhci_s3c_probe+0x4a4/0x540) [ 1.786749] [<c030ea70>] (sdhci_s3c_probe) from [<c02429cc>] (platform_drv_probe+0x2c/0x5c) [ 1.795076] [<c02429cc>] (platform_drv_probe) from [<c02415f0>] (driver_probe_device+0x114/0x234) [ 1.803929] [<c02415f0>] (driver_probe_device) from [<c024179c>] (__driver_attach+0x8c/0x90) [ 1.812347] [<c024179c>] (__driver_attach) from [<c023ffb4>] (bus_for_each_dev+0x54/0x88) [ 1.820506] [<c023ffb4>] (bus_for_each_dev) from [<c0240df8>] (bus_add_driver+0xd8/0x1cc) [ 1.828665] [<c0240df8>] (bus_add_driver) from [<c0241db8>] (driver_register+0x78/0xf4) [ 1.836652] [<c0241db8>] (driver_register) from [<c00088a4>] (do_one_initcall+0x80/0x1d0) [ 1.844816] [<c00088a4>] (do_one_initcall) from [<c059ac94>] (kernel_init_freeable+0x108/0x1d4) [ 1.853503] [<c059ac94>] (kernel_init_freeable) from [<c0401300>] (kernel_init+0x8/0xe4) [ 1.861568] [<c0401300>] (kernel_init) from [<c000e538>] (ret_from_fork+0x14/0x3c) [ 1.869582] platform 12530000.sdhci: Driver s3c-sdhci requests probe deferral ... [ 1.997047] s3c-sdhci 12530000.sdhci: Unbalanced pm_runtime_enable! ... [ 2.027235] s3c-sdhci 12530000.sdhci: sdhci_add_host() failed [ 2.032884] platform 12530000.sdhci: Driver s3c-sdhci requests probe deferral ... Tested on Hardkernel's Exynos4412 based ODROID-U3 board. Fixes: 9f4e8151 ("mmc: sdhci-s3c: Enable runtime power management") Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Roger Tseng authored
commit d1419d50 upstream. Current code erroneously fill the last byte of R2 response with an undefined value. In addition, the controller actually 'offloads' the last byte (CRC7, end bit) while receiving R2 response and thus it's impossible to get the actual value. This could cause mmc stack to obtain inconsistent CID from the same card after resume and misidentify it as a different card. Fix by assigning dummy CRC and end bit: {7'b0, 1} = 0x1 to the last byte of R2. Fixes: ff984e57 ("mmc: Add realtek pcie sdmmc host driver") Signed-off-by:
Roger Tseng <rogerable@realtek.com> Signed-off-by:
-
Stephen Warren authored
commit d4d11449 upstream. As soon as the CD IRQ is requested, it can trigger, since it's an externally controlled event. If it does, delayed_work host->detect will be scheduled. Many host controller probe()s are roughly structured as: *_probe() { host = sdhci_pltfm_init(); mmc_of_parse(host->mmc); rc = sdhci_add_host(host); if (rc) { sdhci_pltfm_free(); return rc; } In 3.17, CD IRQs can are enabled quite early via *_probe() -> mmc_of_parse() -> mmc_gpio_request_cd() -> mmc_gpiod_request_cd_irq(). Note that in linux-next, mmc_of_parse() calls mmc_gpio*d*_request_cd() rather than mmc_gpio_request_cd(), and mmc_gpio*d*_request_cd() doesn't call mmc_gpiod_request_cd_irq(). However, this issue still exists if mmc_gpio_request_cd() is called directly before mmc_start_host(). sdhci_add_host() may fail part way through (e.g. due to deferred probe for a vmmc regulator), and sdhci_pltfm_free() does nothing to unrequest the CD IRQ nor cancel the delayed_work. sdhci_pltfm_free() is coded to assume that if sdhci_add_host() failed, then the delayed_work cannot (or should not) have been triggered. This can lead to the following with CONFIG_DEBUG_OBJECTS_* enabled, when kfree(host) is eventually called inside sdhci_pltfm_free(): WARNING: CPU: 2 PID: 6 at lib/debugobjects.c:263 debug_print_object+0x8c/0xb4() ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x18 The object being complained about is host->detect. There's no need to request the CD IRQ so early; mmc_start_host() already requests it. For most SDHCI hosts at least, the typical call path that does this is: *_probe() -> sdhci_add_host() -> mmc_add_host() -> mmc_start_host(). Therefore, remove the call to mmc_gpiod_request_cd_irq() from mmc_gpio_request_cd(). This also matches mmc_gpio*d*_request_cd(), which already doesn't call mmc_gpiod_request_cd_irq(). However, some host controller drivers call mmc_gpio_request_cd() after mmc_start_host() has already been called, and assume that this will also call mmc_gpiod_request_cd_irq(). Update those drivers to explicitly call mmc_gpiod_request_cd_irq() themselves. Ideally, these drivers should be modified to move their call to mmc_gpio_request_cd() before their call to mmc_add_host(). However that's too large a change for stable. This solves the problem (eliminates the kernel error message above), since it guarantees that the IRQ can't trigger before mmc_start_host() is called. The critical point here is that once sdhci_add_host() calls mmc_add_host() -> mmc_start_host(), sdhci_add_host() is coded not to fail. In other words, if there's a chance that mmc_start_host() may have been called, and CD IRQs triggered, and the delayed_work scheduled, sdhci_add_host() won't fail, and so cleanup is no longer via sdhci_pltfm_free() (which doesn't free the IRQ or cancel the work queue) but instead must be via sdhci_remove_host(), which calls mmc_remove_host() -> mmc_stop_host(), which does free the IRQ and cancel the work queue. CC: Russell King <linux@arm.linux.org.uk> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Stephen Warren <swarren@nvidia.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Roger Tseng authored
commit 6f67cc6f upstream. Current code erroneously fill the last byte of R2 response with an undefined value. In addition, the controller actually 'offloads' the last byte (CRC7, end bit) while receiving R2 response and thus it's impossible to get the actual value. This could cause mmc stack to obtain inconsistent CID from the same card after resume and misidentify it as a different card. Fix by assigning dummy CRC and end bit: {7'b0, 1} = 0x1 to the last byte of R2. Fixes: c7f6558d ("mmc: Add realtek USB sdmmc host driver") Signed-off-by:
-
Peter Griffin authored
commit b3153765 upstream. .set_uhs_signaling field is currently initialised twice once to the arch specific callback pxav3_set_uhs_signaling, and also to the generic sdhci_set_uhs_signaling callback. This means that uhs is currently broken for this platform currently, as pxav3 has some special constriants which means it can't use the generic callback. This happened in commit 96d7b78c ("mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function") commit a702c8ab ("mmc: host: split up sdhci-pxa, create sdhci-pxav3.c")' Fix this and hopefully prevent it happening in the future by ensuring named initialisers always follow the declaration order in the structure definition. Signed-off-by:
Peter Griffin <peter.griffin@linaro.org> Signed-off-by:
-
Fu Zhonghui authored
commit dea67c4e upstream. 781e989c ("mmc: sdhci: convert to new SDIO IRQ handling") and bf3b5ec6 ("mmc: sdio_irq: rework sdio irq handling") disabled the use of our own custom threaded IRQ handler, but left in an unconditional wake_up_process() on that handler at resume-time. Link: https://bugzilla.kernel.org/show_bug.cgi?id=80151 In addition, the check for MMC_CAP_SDIO_IRQ capability is added before enable sdio IRQ. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
Chris Ball <chris@printf.net> Signed-off-by:
Fu Zhonghui <zhonghui.fu@linux.intel.com> Signed-off-by:
-
Dmitry Lavnikevich authored
commit 31d9f8fa upstream. Current caching implementation during regcache_sync() call bypasses all register writes of values that are already known as default (regmap reg_defaults). Same time in TLV320AIC3x codecs register 5 (AIC3X_PLL_PROGC_REG) write should be immediately followed by register 6 write (AIC3X_PLL_PROGD_REG) even if it was not changed. Otherwise both registers will not be written. This brings to issue that appears particulary in case of 44.1kHz playback with 19.2MHz master clock. In this case AIC3X_PLL_PROGC_REG is 0x6e while AIC3X_PLL_PROGD_REG is 0x0 (same as register default). Thus AIC3X_PLL_PROGC_REG also remains not written and we get wrong playback speed. In this patch snd_soc_read() is used to get cached pll values and snd_soc_write() (unlike regcache_sync() this function doesn't bypasses hardware default values) to write them to registers. Signed-off-by:
Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Daniel Mack authored
commit e5092c96 upstream. Coverity spotted the following possible use-after-free condition in dapm_create_or_share_mixmux_kcontrol(): If kcontrol is NULL, and (wname_in_long_name && kcname_in_long_name) validates to true, 'name' will be set to an allocated string, and be freed a few lines later via the 'long_name' alias. 'name', however, is used by dev_err() in case snd_ctl_add() fails. Fix this by adding a jump label that frees 'long_name' at the end of the function. Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
-
Ondrej Zary authored
commit 6d8ca28f upstream. Currently, ata_sff_softreset is skipped for controllers with no ctl port. But that also skips ata_sff_dev_classify required for device detection. This means that libata is currently broken on controllers with no ctl port. No device connected: [ 1.872480] pata_isapnp 01:01.02: activated [ 1.889823] scsi2 : pata_isapnp [ 1.890109] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11 [ 6.888110] ata3.01: qc timeout (cmd 0xec) [ 6.888179] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 16.888085] ata3.01: qc timeout (cmd 0xec) [ 16.888147] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 46.888086] ata3.01: qc timeout (cmd 0xec) [ 46.888148] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 51.888100] ata3.00: qc timeout (cmd 0xec) [ 51.888160] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 61.888079] ata3.00: qc timeout (cmd 0xec) [ 61.888141] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 91.888089] ata3.00: qc timeout (cmd 0xec) [ 91.888152] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5) ATAPI device connected: [ 1.882061] pata_isapnp 01:01.02: activated [ 1.893430] scsi2 : pata_isapnp [ 1.893719] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11 [ 6.892107] ata3.01: qc timeout (cmd 0xec) [ 6.892171] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 16.892079] ata3.01: qc timeout (cmd 0xec) [ 16.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 46.892079] ata3.01: qc timeout (cmd 0xec) [ 46.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 46.908586] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr [ 46.924570] ata3.00: configured for PIO0 (device error ignored) [ 46.926295] scsi 2:0:0:0: CD-ROM ACER CD-767E/O 1.5X PQ: 0 ANSI: 5 [ 46.984519] sr0: scsi3-mmc drive: 6x/6x xa/form2 tray [ 46.984592] cdrom: Uniform CD-ROM driver Revision: 3.20 So don't skip ata_sff_softreset, just skip the reset part of ata_bus_softreset if the ctl port is not available. This makes IDE port on ES968 behave correctly: No device connected: [ 4.670888] pata_isapnp 01:01.02: activated [ 4.673207] scsi host2: pata_isapnp [ 4.673675] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11 [ 7.081840] Adding 2541652k swap on /dev/sda2. Priority:-1 extents:1 across:2541652k ATAPI device connected: [ 4.704362] pata_isapnp 01:01.02: activated [ 4.706620] scsi host2: pata_isapnp [ 4.706877] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11 [ 4.872782] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr [ 4.888673] ata3.00: configured for PIO0 (device error ignored) [ 4.893984] scsi 2:0:0:0: CD-ROM ACER CD-767E/O 1.5X PQ: 0 ANSI: 5 [ 7.015578] Adding 2541652k swap on /dev/sda2. Priority:-1 extents:1 across:2541652k Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Scott Carter authored
commit 37017ac6 upstream. The Broadcom OSB4 IDE Controller (vendor and device IDs: 1166:0211) does not support 64-KB DMA transfers. Whenever a 64-KB DMA transfer is attempted, the transfer fails and messages similar to the following are written to the console log: [ 2431.851125] sr 0:0:0:0: [sr0] Unhandled sense code [ 2431.851139] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2431.851152] sr 0:0:0:0: [sr0] Sense Key : Hardware Error [current] [ 2431.851166] sr 0:0:0:0: [sr0] Add. Sense: Logical unit communication time-out [ 2431.851182] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 76 f4 00 00 40 00 [ 2431.851210] end_request: I/O error, dev sr0, sector 121808 When the libata and pata_serverworks modules are recompiled with ATA_DEBUG and ATA_VERBOSE_DEBUG defined in libata.h, the 64-KB transfer size in the scatter-gather list can be seen in the console log: [ 2664.897267] sr 9:0:0:0: [sr0] Send: [ 2664.897274] 0xf63d85e0 [ 2664.897283] sr 9:0:0:0: [sr0] CDB: [ 2664.897288] Read(10): 28 00 00 00 7f b4 00 00 40 00 [ 2664.897319] buffer = 0xf6d6fbc0, bufflen = 131072, queuecommand 0xf81b7700 [ 2664.897331] ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 7f b4 00 00 40 [ 2664.897338] ata_scsi_translate: ENTER [ 2664.897345] ata_sg_setup: ENTER, ata1 [ 2664.897356] ata_sg_setup: 3 sg elements mapped [ 2664.897364] ata_bmdma_fill_sg: PRD[0] = (0x66FD2000, 0xE000) [ 2664.897371] ata_bmdma_fill_sg: PRD[1] = (0x65000000, 0x10000) ------------------------------------------------------> ======= [ 2664.897378] ata_bmdma_fill_sg: PRD[2] = (0x66A10000, 0x2000) [ 2664.897386] ata1: ata_dev_select: ENTER, device 0, wait 1 [ 2664.897422] ata_sff_tf_load: feat 0x1 nsect 0x0 lba 0x0 0x0 0xFC [ 2664.897428] ata_sff_tf_load: device 0xA0 [ 2664.897448] ata_sff_exec_command: ata1: cmd 0xA0 [ 2664.897457] ata_scsi_translate: EXIT [ 2664.897462] leaving scsi_dispatch_cmnd() [ 2664.897497] Doing sr request, dev = sr0, block = 0 [ 2664.897507] sr0 : reading 64/256 512 byte blocks. [ 2664.897553] ata_sff_hsm_move: ata1: protocol 7 task_state 1 (dev_stat 0x58) [ 2664.897560] atapi_send_cdb: send cdb [ 2666.910058] ata_bmdma_port_intr: ata1: host_stat 0x64 [ 2666.910079] __ata_sff_port_intr: ata1: protocol 7 task_state 3 [ 2666.910093] ata_sff_hsm_move: ata1: protocol 7 task_state 3 (dev_stat 0x51) [ 2666.910101] ata_sff_hsm_move: ata1: protocol 7 task_state 4 (dev_stat 0x51) [ 2666.910129] sr 9:0:0:0: [sr0] Done: [ 2666.910136] 0xf63d85e0 TIMEOUT lspci shows that the driver used for the Broadcom OSB4 IDE Controller is pata_serverworks: 00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8e [Master SecP SecO PriP]) Flags: bus master, medium devsel, latency 64 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=4] I/O ports at 1440 [size=16] Kernel driver in use: pata_serverworks The pata_serverworks driver supports five distinct device IDs, one being the OSB4 and the other four belonging to the CSB series. The CSB series appears to support 64-KB DMA transfers, as tests on a machine with an SAI2 motherboard containing a Broadcom CSB5 IDE Controller (vendor and device IDs: 1166:0212) showed no problems with 64-KB DMA transfers. This problem was first discovered when attempting to install openSUSE from a DVD on a machine with an STL2 motherboard. Using the pata_serverworks module, older releases of openSUSE will not install at all due to the timeouts. Releases of openSUSE prior to 11.3 can be installed by disabling the pata_serverworks module using the brokenmodules boot parameter, which causes the serverworks module to be used instead. Recent releases of openSUSE (12.2 and later) include better error recovery and will install, though very slowly. On all openSUSE releases, the problem can be recreated on a machine containing a Broadcom OSB4 IDE Controller by mounting an install DVD and running a command similar to the following: find /mnt -type f -print | xargs cat > /dev/null The patch below corrects the problem. Similar to the other ATA drivers that do not support 64-KB DMA transfers, the patch changes the ata_port_operations qc_prep vector to point to a routine that breaks any 64-KB segment into two 32-KB segments and changes the scsi_host_template sg_tablesize element to reduce by half the number of scatter/gather elements allowed. These two changes affect only the OSB4. Signed-off-by:
Scott Carter <ccscott@funsoft.com> Signed-off-by:
-
Guenter Roeck authored
commit bb2e226b upstream. This reverts commit 3189eddb ("percpu: free percpu allocation info for uniprocessor system"). The commit causes a hang with a crisv32 image. This may be an architecture problem, but at least for now the revert is necessary to be able to boot a crisv32 image. Cc: Tejun Heo <tj@kernel.org> Cc: Honggang Li <enjoymindful@gmail.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Trond Myklebust authored
commit 2aca5b86 upstream. The flag RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT was intended introduced in order to allow NFSv4 clients to disable resend timeouts. Since those cause the RPC layer to break the connection, they mess up the duplicate reply caches that remain indexed on the port number in NFSv4.. This patch includes the code that was missing in the original to set the appropriate flag in struct rpc_clnt, when the caller of rpc_create() sets RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT. Fixes: 8a19a0b6 (SUNRPC: Add RPC task and client level options to...) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Benjamin Coddington authored
commit a743419f upstream. When aborting a connection to preserve source ports, don't wake the task in xs_error_report. This allows tasks with RPC_TASK_SOFTCONN to succeed if the connection needs to be re-established since it preserves the task's status instead of setting it to the status of the aborting kernel_connect(). This may also avoid a potential conflict on the socket's lock. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
-
Benjamin Coddington authored
commit 173b3afc upstream. If rpc.statd is restarted, upcalls to monitor hosts can fail with ECONNREFUSED. In that case force a lookup of statd's new port and retry the upcall. Signed-off-by:
-
Michel Dänzer authored
commit e300180f upstream. The radeon driver uses placement range restrictions for several reasons, in particular to make sure BOs in VRAM can be accessed by the CPU, e.g. during a page fault. Without this change, TTM could evict other BOs while trying to satisfy the requested placement, even if the evicted BOs were outside of the requested placement range. Doing so didn't free up any space in the requested placement range, so the (potentially high) eviction cost was incurred for no benefit. Nominating for stable because radeon driver changes in 3.17 made this much more noticeable than before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84662Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> [ luis: backported to 3.16: based on Michel's backport ] Signed-off-by:
-
Ondrej Kozina authored
commit e2cffb5f upstream. On archs with PAGE_SIZE >= 64 KiB the function skcipher_alloc_sgl() fails with -ENOMEM no matter what user space actually requested. This is caused by the fact sock_kmalloc call inside the function tried to allocate more memory than allowed by the default kernel socket buffer size (kernel param net.core.optmem_max). Signed-off-by:
Ondrej Kozina <okozina@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Arturo Borrero authored
commit 7965ee93 upstream. The code looks for an already loaded target, and the correct list to search is nft_target_list, not nft_match_list. Signed-off-by:
Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Houcheng Lin authored
commit b51d3fa3 upstream. The kernel should reserve enough room in the skb so that the DONE message can always be appended. However, in case of e.g. new attribute erronously not being size-accounted for, __nfulnl_send() will still try to put next nlmsg into this full skbuf, causing the skb to be stuck forever and blocking delivery of further messages. Fix issue by releasing skb immediately after nlmsg_put error and WARN() so we can track down the cause of such size mismatch. [ fw@strlen.de: add tailroom/len info to WARN ] Signed-off-by:
Houcheng Lin <houcheng@gmail.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
commit c1e7dc91 upstream. don't try to queue payloads > 0xffff - NLA_HDRLEN, it does not work. The nla length includes the size of the nla struct, so anything larger results in u16 integer overflow. This patch is similar to 9cefbbc9 (netfilter: nfnetlink_queue: cleanup copy_range usage). Signed-off-by:
-
Florian Westphal authored
commit 9dfa1dfe upstream. We currently neither account for the nlattr size, nor do we consider the size of the trailing NLMSG_DONE when allocating nlmsg skb. This can result in nflog to stop working, as __nfulnl_send() re-tries sending forever if it failed to append NLMSG_DONE (which will never work if buffer is not large enough). Reported-by:
-
Sabrina Dubroca authored
commit c123bb71 upstream. alloc_percpu returns NULL on failure, not a negative error code. Fixes: ff3cd7b3 ("netfilter: nf_tables: refactor chain statistic routines") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Dan Carpenter authored
commit 0f9f5e1b upstream. The ->ip_set_list[] array is initialized in ip_set_net_init() and it has ->ip_set_max elements so this check should be >= instead of > otherwise we are off by one. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Libin Yang authored
commit d1585c89 upstream. This patch adds codec ID (0x80862883) and module alias for Braswell display codec. Signed-off-by:
Libin Yang <libin.yang@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by:
-
Libin Yang authored
commit f31b2ffc upstream. Add HD Audio Device PCI ID for the Intel Braswell platform. It is an HDA Intel PCH controller. AZX_DCAPS_ALIGN_BUFSIZE is not necessary for this controller. Signed-off-by:
-
David E. Box authored
commit 849f5d89 upstream. Add Braswell PCI ID to list of supported ID's for the IOSF driver. Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Link: http://lkml.kernel.org/r/1411017231-20807-2-git-send-email-david.e.box@linux.intel.comSigned-off-by:
-
Mika Westerberg authored
commit 16405f98 upstream. This is pretty much the same as Intel Baytrail, only the CPU ID is different. Add the new ID to the supported CPU list. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by:
-
Bob Peterson authored
commit 19aeb5a6 upstream. This patch fixes a regression in the patch "GFS2: Remember directory insert point", commit 2b47dad8. The problem had to do with the rename function: The function found space for the new dirent, and remembered that location. But then the old dirent was removed, which often moved the eligible location for the renamed dirent. Putting the new dirent at the saved location caused file system corruption. This patch adds a new "save_loc" variable to struct gfs2_diradd. If 1, the dirent location is saved. If 0, the dirent location is not saved and the buffer_head is released as per previous behavior. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
-
Ben Skeggs authored
commit 595d373f upstream. Fixes type/mask calculation being based on uninitialised data for VGA outputs. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Cc: Sven Joachim <svenjoac@gmx.de> Signed-off-by:
-
Ben Skeggs authored
commit 5838ae61 upstream. Reported in fdo#82527 comment #2. Signed-off-by:
-
Ben Skeggs authored
commit fe3d9c4b upstream. A mismatch between FB and LTC's idea of how big a large page is causes issues such as black "holes" in rendering to occur on some boards (those where LTC is configured for 64KiB large pages) when compression is used. Confirmed to fix at least the GK107 MBP. Signed-off-by:
Dave Airlie <airlied@redhat.com> Cc: Sven Joachim <svenjoac@gmx.de> Signed-off-by:
-
Ben Skeggs authored
commit 147ed897 upstream. Signed-off-by:
-
