Skip to content

L
linux
Switch branch/tag
  1. 06 Mar, 2015 5 commits
  3. 05 Mar, 2015 3 commits
  5. 03 Mar, 2015 8 commits
    • Alexander Aring's avatar
      at86rf230: restore trx len when needed · 263be332
      Alexander Aring authored 
      In the most cases the spi messages has a length of two. Currently we
always set the the len field to two before transmit a spi message. In
cases for read out/write in the frame buffer we need another len. This
patch use trx len two as default. For the frame buffer cases we restore
the trx len to two on success and failure. This will reduce the len
setting of two when it's already two.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      263be332
    • Alexander Aring's avatar
      at86rf230: remove multiple dereferencing for ctx · 31fa7434
      Alexander Aring authored 
      This patch cleanups the referencing for the state change context
variable. The state change context should only set once and this is by
initial a state change. This patch will use the initial state change
variable in the complete handler of the state change by using the ctx
context which should be always the same like the initial state change
context.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      31fa7434
    • Alexander Aring's avatar
      at86rf230: remove multiple dereferencing for irq · cca990c8
      Alexander Aring authored 
      By holding the irq variable inside at86rf230_state_change we can squash
some multiple dereferencing for getting irq num.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      cca990c8
    • Alexander Aring's avatar
      at86rf230: refactor receive handling · 74de4c80
      Alexander Aring authored 
      This patch refactor the receive handling into one function.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      74de4c80
    • Alexander Aring's avatar
      at86rf230: cleanup and squash stack variable · ef5428a1
      Alexander Aring authored 
      I had this variable because I thought it would be protected by
disable/enable irq but this is not true. It's protected by stop/wake
netdev queue which is called by ieee802154_xmit_complete.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      ef5428a1
    • Alexander Aring's avatar
      at86rf230: add transmit retry support · ba6d2239
      Alexander Aring authored 
      This patch introduce a transmit retry handling into at86rf230 transmit
path. Current behaviour is to wait the normal receive time if we want
to go into STATE_TX_ON when the transceiver is in STATE_BUSY_RX_AACK
which indicates that a frame is currently receiving. A non force state
change will not interrupt the the receiving state.

The current behaviour is that after the normal receive time we will
start a force change into STATE_TX_ON. With this patch we do seven
retries to go into STATE_TX_ON without forcing. After we hit the
AT86RF2XX_MAX_TX_RETRIES we will start the force state change.
This is a polling like method to go into STATE_TX_ON in times of maximum
receiving time.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      ba6d2239
    • Kim, Ben Young Tae's avatar
      Bluetooth: btusb: Add support for QCA ROME chipset family · 3267c884
      Kim, Ben Young Tae authored 
      This patch supports ROME Bluetooth family from Qualcomm Atheros,
e.g. QCA61x4 or QCA6574.

New chipset have similar firmware downloading sequences to previous
chipset from Atheros, however, it doesn't support vid/pid switching
after downloading the patch so that firmware needs to be handled by
btusb module directly.

ROME chipset can be differentiated from previous version by reading
ROM version.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 16 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=e300 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  8 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0cf3 ProdID=e360 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
Signed-off-by: default avatarBen Young Tae Kim <ytkim@qca.qualcomm.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      3267c884
    • Kim, Ben Young Tae's avatar
      Bluetooth: btusb: Add setup callback for chip init on USB · ace31982
      Kim, Ben Young Tae authored 
      Some of chipset does not allow to send a patch or config files through
HCI VS channel at early stage as well as they don't support to send
USB patch files to other channel except USB bulk path.

New callback added is for initialization of BT controller through USB
Signed-off-by: default avatarBen Young Tae Kim <ytkim@qca.qualcomm.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      ace31982
  7. 02 Mar, 2015 18 commits
  9. 01 Mar, 2015 6 commits
    • David S. Miller's avatar
      Merge branch 'ebpf_support_for_cls_bpf' · 68932f71
      David S. Miller authored 
      Daniel Borkmann says:

====================
eBPF support for cls_bpf

This is the non-RFC version of my patchset posted before netdev01 [1]
conference. It contains a couple of eBPF cleanups and preparation
patches to get eBPF support into cls_bpf. The last patch adds the
actual support. I'll post the iproute2 parts after the kernel bits
are merged, an initial preview link to the code is mentioned in the
last patch.

Patch 4 and 5 were originally one patch, but I've split them into
two parts upon request as patch 4 only is also needed for Alexei's
tracing patches that go via tip tree.

Tested with tc and all in-kernel available BPF test suites.

I have configured and built LLVM with --enable-experimental-targets=BPF
but as Alexei put it, the plan is to get rid of the experimental
status in future [2].

Thanks a lot!

v1 -> v2:
 - Removed arch patches from this series
  - x86 is already queued in tip tree, under x86/mm
  - arm64 just reposted directly to arm folks
 - Rest is unchanged

  [1] http://thread.gmane.org/gmane.linux.network/350191
  [2] http://article.gmane.org/gmane.linux.kernel/1874969
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      68932f71
    • Daniel Borkmann's avatar
      cls_bpf: add initial eBPF support for programmable classifiers · e2e9b654
      Daniel Borkmann authored 
      This work extends the "classic" BPF programmable tc classifier by
extending its scope also to native eBPF code!

This allows for user space to implement own custom, 'safe' C like
classifiers (or whatever other frontend language LLVM et al may
provide in future), that can then be compiled with the LLVM eBPF
backend to an eBPF elf file. The result of this can be loaded into
the kernel via iproute2's tc. In the kernel, they can be JITed on
major archs and thus run in native performance.

Simple, minimal toy example to demonstrate the workflow:

  #include <linux/ip.h>
  #include <linux/if_ether.h>
  #include <linux/bpf.h>

  #include "tc_bpf_api.h"

  __section("classify")
  int cls_main(struct sk_buff *skb)
  {
    return (0x800 << 16) | load_byte(skb, ETH_HLEN + __builtin_offsetof(struct iphdr, tos));
  }

  char __license[] __section("license") = "GPL";

The classifier can then be compiled into eBPF opcodes and loaded
via tc, for example:

  clang -O2 -emit-llvm -c cls.c -o - | llc -march=bpf -filetype=obj -o cls.o
  tc filter add dev em1 parent 1: bpf cls.o [...]

As it has been demonstrated, the scope can even reach up to a fully
fledged flow dissector (similarly as in samples/bpf/sockex2_kern.c).

For tc, maps are allowed to be used, but from kernel context only,
in other words, eBPF code can keep state across filter invocations.
In future, we perhaps may reattach from a different application to
those maps e.g., to read out collected statistics/state.

Similarly as in socket filters, we may extend functionality for eBPF
classifiers over time depending on the use cases. For that purpose,
cls_bpf programs are using BPF_PROG_TYPE_SCHED_CLS program type, so
we can allow additional functions/accessors (e.g. an ABI compatible
offset translation to skb fields/metadata). For an initial cls_bpf
support, we allow the same set of helper functions as eBPF socket
filters, but we could diverge at some point in time w/o problem.

I was wondering whether cls_bpf and act_bpf could share C programs,
I can imagine that at some point, we introduce i) further common
handlers for both (or even beyond their scope), and/or if truly needed
ii) some restricted function space for each of them. Both can be
abstracted easily through struct bpf_verifier_ops in future.

The context of cls_bpf versus act_bpf is slightly different though:
a cls_bpf program will return a specific classid whereas act_bpf a
drop/non-drop return code, latter may also in future mangle skbs.
That said, we can surely have a "classify" and "action" section in
a single object file, or considered mentioned constraint add a
possibility of a shared section.

The workflow for getting native eBPF running from tc [1] is as
follows: for f_bpf, I've added a slightly modified ELF parser code
from Alexei's kernel sample, which reads out the LLVM compiled
object, sets up maps (and dynamically fixes up map fds) if any, and
loads the eBPF instructions all centrally through the bpf syscall.

The resulting fd from the loaded program itself is being passed down
to cls_bpf, which looks up struct bpf_prog from the fd store, and
holds reference, so that it stays available also after tc program
lifetime. On tc filter destruction, it will then drop its reference.

Moreover, I've also added the optional possibility to annotate an
eBPF filter with a name (e.g. path to object file, or something
else if preferred) so that when tc dumps currently installed filters,
some more context can be given to an admin for a given instance (as
opposed to just the file descriptor number).

Last but not least, bpf_prog_get() and bpf_prog_put() needed to be
exported, so that eBPF can be used from cls_bpf built as a module.
Thanks to 60a3b225 ("net: bpf: make eBPF interpreter images
read-only") I think this is of no concern since anything wanting to
alter eBPF opcode after verification stage would crash the kernel.

  [1] http://git.breakpoint.cc/cgit/dborkman/iproute2.git/log/?h=ebpfSigned-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Acked-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e2e9b654
    • Daniel Borkmann's avatar
      ebpf: move read-only fields to bpf_prog and shrink bpf_prog_aux · 24701ece
      Daniel Borkmann authored 
      is_gpl_compatible and prog_type should be moved directly into bpf_prog
as they stay immutable during bpf_prog's lifetime, are core attributes
and they can be locked as read-only later on via bpf_prog_select_runtime().

With a bit of rearranging, this also allows us to shrink bpf_prog_aux
to exactly 1 cacheline.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      24701ece
    • Daniel Borkmann's avatar
      ebpf: add sched_cls_type and map it to sk_filter's verifier ops · 96be4325
      Daniel Borkmann authored 
      As discussed recently and at netconf/netdev01, we want to prevent making
bpf_verifier_ops registration available for modules, but have them at a
controlled place inside the kernel instead.

The reason for this is, that out-of-tree modules can go crazy and define
and register any verfifier ops they want, doing all sorts of crap, even
bypassing available GPLed eBPF helper functions. We don't want to offer
such a shiny playground, of course, but keep strict control to ourselves
inside the core kernel.

This also encourages us to design eBPF user helpers carefully and
generically, so they can be shared among various subsystems using eBPF.

For the eBPF traffic classifier (cls_bpf), it's a good start to share
the same helper facilities as we currently do in eBPF for socket filters.

That way, we have BPF_PROG_TYPE_SCHED_CLS look like it's own type, thus
one day if there's a good reason to diverge the set of helper functions
from the set available to socket filters, we keep ABI compatibility.

In future, we could place all bpf_prog_type_list at a central place,
perhaps.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      96be4325
    • Daniel Borkmann's avatar
      ebpf: remove CONFIG_BPF_SYSCALL ifdefs in socket filter code · d4052c4a
      Daniel Borkmann authored 
      This gets rid of CONFIG_BPF_SYSCALL ifdefs in the socket filter code,
now that the BPF internal header can deal with it.

While going over it, I also changed eBPF related functions to a sk_filter
prefix to be more consistent with the rest of the file.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d4052c4a
    • Daniel Borkmann's avatar
      ebpf: make internal bpf API independent of CONFIG_BPF_SYSCALL ifdefs · 0fc174de
      Daniel Borkmann authored 
      Socket filter code and other subsystems with upcoming eBPF support should
not need to deal with the fact that we have CONFIG_BPF_SYSCALL defined or
not.

Having the bpf syscall as a config option is a nice thing and I'd expect
it to stay that way for expert users (I presume one day the default setting
of it might change, though), but code making use of it should not care if
it's actually enabled or not.

Instead, hide this via header files and let the rest deal with it.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0fc174de
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7