The VMbus driver has special case code for running on the first released
versions of Hyper-V: 2008 and 2008 R2/Windows 7. These versions are now
out of support (except for extended security updates) and lack the
performance features needed for effective production usage of Linux
guests.

Simplify the code by removing the negotiation of the VMbus protocol
versions required for these releases of Hyper-V, and by removing the
special case code for handling these VMbus protocol versions.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/1651509391-2058-2-git-send-email-mikelley@microsoft.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

In newer versions of Hyper-V, the x86/x64 PMU can be virtualized
into guest VMs by explicitly enabling it. Linux kernels are typically
built to automatically enable the hardlockup detector if the PMU is
found. To prevent the possibility of false positives due to the
vagaries of VM scheduling, disable the PMU-based hardlockup detector
by default in a VM on Hyper-V.  The hardlockup detector can still be
enabled by overriding the default with the nmi_watchdog=1 option on
the kernel boot line or via sysctl at runtime.

This change mimics the approach taken with KVM guests in
commit 692297d8 ("watchdog: introduce the hardlockup_detector_disable()
function").

Linux on ARM64 does not provide a PMU-based hardlockup detector, so
there's no corresponding disable in the Hyper-V init code on ARM64.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1652111063-6535-1-git-send-email-mikelley@microsoft.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

Add error message when the size of requested framebuffer is more than
the allocated size by vmbus mmio region for framebuffer.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1649737739-10113-1-git-send-email-ssengar@linux.microsoft.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

Currently when the pci-hyperv driver finishes probing and initializing the
PCI device, it sets the PCI_COMMAND_MEMORY bit; later when the PCI device
is registered to the core PCI subsystem, the core PCI driver's BAR detection
and initialization code toggles the bit multiple times, and each toggling of
the bit causes the hypervisor to unmap/map the virtual BARs from/to the
physical BARs, which can be slow if the BAR sizes are huge, e.g., a Linux VM
with 14 GPU devices has to spend more than 3 minutes on BAR detection and
initialization, causing a long boot time.

Reduce the boot time by not setting the PCI_COMMAND_MEMORY bit when we
register the PCI device (there is no need to have it set in the first place).
The bit stays off till the PCI device driver calls pci_enable_device().
With this change, the boot time of such a 14-GPU VM is reduced by almost
3 minutes.

Link: https://lore.kernel.org/lkml/20220419220007.26550-1-decui@microsoft.com/Tested-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jake Oshins <jakeo@microsoft.com>
Link: https://lore.kernel.org/r/20220502074255.16901-1-decui@microsoft.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

In the multi-MSI case, hv_arch_irq_unmask() will only operate on the first
MSI of the N allocated.  This is because only the first msi_desc is cached
and it is shared by all the MSIs of the multi-MSI block.  This means that
hv_arch_irq_unmask() gets the correct address, but the wrong data (always
0).

This can break MSIs.

Lets assume MSI0 is vector 34 on CPU0, and MSI1 is vector 33 on CPU0.

hv_arch_irq_unmask() is called on MSI0.  It uses a hypercall to configure
the MSI address and data (0) to vector 34 of CPU0.  This is correct.  Then
hv_arch_irq_unmask is called on MSI1.  It uses another hypercall to
configure the MSI address and data (0) to vector 33 of CPU0.  This is
wrong, and results in both MSI0 and MSI1 being routed to vector 33.  Linux
will observe extra instances of MSI1 and no instances of MSI0 despite the
endpoint device behaving correctly.

For the multi-MSI case, we need unique address and data info for each MSI,
but the cached msi_desc does not provide that.  However, that information
can be gotten from the int_desc cached in the chip_data by
compose_msi_msg().  Fix the multi-MSI case to use that cached information
instead.  Since hv_set_msi_entry_from_desc() is no longer applicable,
remove it.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1651068453-29588-1-git-send-email-quic_jhugo@quicinc.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

With no users of hv_pkt_iter_next_raw() and no "external" users of
hv_pkt_iter_first_raw(), the iterator functions can be refactored
and simplified to remove some indirection/code.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220428145107.7878-6-parri.andrea@gmail.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

So that isolated guests can communicate with the host via hv_sock
channels.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220428145107.7878-5-parri.andrea@gmail.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

For additional robustness in the face of Hyper-V errors or malicious
behavior, validate all values that originate from packets that Hyper-V
has sent to the guest in the host-to-guest ring buffer.  Ensure that
invalid values cannot cause data being copied out of the bounds of the
source buffer in hvs_stream_dequeue().
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220428145107.7878-4-parri.andrea@gmail.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

Pointers to VMbus packets sent by Hyper-V are used by the hv_sock driver
within the guest VM.  Hyper-V can send packets with erroneous values or
modify packet fields after they are processed by the guest.  To defend
against these scenarios, copy the incoming packet after validating its
length and offset fields using hv_pkt_iter_{first,next}().  Use
HVS_PKT_LEN(HVS_MTU_SIZE) to initialize the buffer which holds the
copies of the incoming packets.  In this way, the packet can no longer
be modified by the host.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220428145107.7878-3-parri.andrea@gmail.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

The function returns NULL if the ring buffer doesn't contain enough
readable bytes to constitute a packet descriptor.  The ring buffer's
write_index is in memory which is shared with the Hyper-V host, an
erroneous or malicious host could thus change its value and overturn
the result of hvs_stream_has_data().
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220428145107.7878-2-parri.andrea@gmail.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

Dexuan wrote:

  "[...]  when we disable AccelNet, the host PCI VSP driver sends a
   PCI_EJECT message first, and the channel callback may set
   hpdev->state to hv_pcichild_ejecting on a different CPU.  This can
   cause hv_compose_msi_msg() to exit from the loop and 'return', and
   the on-stack variable 'ctxt' is invalid.  Now, if the response
   message from the host arrives, the channel callback will try to
   access the invalid 'ctxt' variable, and this may cause a crash."

Schematically:

  Hyper-V sends PCI_EJECT msg
    hv_pci_onchannelcallback()
      state = hv_pcichild_ejecting
                                       hv_compose_msi_msg()
                                         alloc and init comp_pkt
                                         state == hv_pcichild_ejecting
  Hyper-V sends VM_PKT_COMP msg
    hv_pci_onchannelcallback()
      retrieve address of comp_pkt
                                         'free' comp_pkt and return
      comp_pkt->completion_func()

Dexuan also showed how the crash can be triggered after introducing
suitable delays in the driver code, thus validating the 'assumption'
that the host can still normally respond to the guest's compose_msi
request after the host has started to eject the PCI device.

Fix the synchronization by leveraging the requestor lock as follows:

  - Before 'return'-ing in hv_compose_msi_msg(), remove the ID (while
    holding the requestor lock) associated to the completion packet.

  - Retrieve the address *and call ->completion_func() within a same
    (requestor) critical section in hv_pci_onchannelcallback().
Reported-by: Wei Hu <weh@microsoft.com>
Reported-by: Dexuan Cui <decui@microsoft.com>
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220419122325.10078-7-parri.andrea@gmail.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

To abtract the lock and unlock operations on the requestor spin lock.
The helpers will come in handy in hv_pci.

No functional change.
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220419122325.10078-6-parri.andrea@gmail.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

The function can be used to retrieve and clear/remove a transation ID
from a channel requestor, provided the memory address corresponding to
the ID equals a specified address.  The function, and its 'lockless'
variant __vmbus_request_addr_match(), will be used by hv_pci.

Refactor vmbus_request_addr() to reuse the 'newly' introduced code.

No functional change.
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220419122325.10078-5-parri.andrea@gmail.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

The function can be used to send a VMbus packet and retrieve the
corresponding transaction ID.  It will be used by hv_pci.

No functional change.
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220419122325.10078-4-parri.andrea@gmail.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

Currently, pointers to guest memory are passed to Hyper-V as transaction
IDs in hv_pci.  In the face of errors or malicious behavior in Hyper-V,
hv_pci should not expose or trust the transaction IDs returned by
Hyper-V to be valid guest memory addresses.  Instead, use small integers
generated by vmbus_requestor as request (transaction) IDs.
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220419122325.10078-3-parri.andrea@gmail.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

vmbus_request_addr() returns 0 (zero) if the transaction ID passed
to as argument is 0.  This is unfortunate for two reasons: first,
netvsc_send_completion() does not check for a NULL cmd_rqst (before
dereferencing the corresponding NVSP message); second, 0 is a *valid*
value of cmd_rqst in netvsc_send_tx_complete(), cf. the call of
vmbus_sendpacket() in netvsc_send_pkt().

vmbus_request_addr() has included the code in question since its
introduction with commit e8b7db38 ("Drivers: hv: vmbus: Add
vmbus_requestor data structure for VMBus hardening"); such code was
motivated by the early use of vmbus_requestor by hv_storvsc.  Since
hv_storvsc moved to a tag-based mechanism to generate and retrieve
transaction IDs with commit bf5fd8ca ("scsi: storvsc: Use
blk_mq_unique_tag() to generate requestIDs"), vmbus_request_addr()
can be modified to return VMBUS_RQST_ERROR if the ID is 0.  This
change solves the issues in hv_netvsc (and makes the handling of
messages with transaction ID of 0 consistent with the semantics
"the ID is not contained in the requestor/invalid ID").

vmbus_next_request_id(), vmbus_request_addr() should still reserve
the ID of 0 for Hyper-V, because Hyper-V will "ignore" (not respond
to) VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED packets/requests with
transaction ID of 0 from the guest.

Fixes: bf5fd8ca ("scsi: storvsc: Use blk_mq_unique_tag() to generate requestIDs")
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220419122325.10078-2-parri.andrea@gmail.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

If the allocation of multiple MSI vectors for multi-MSI fails in the core
PCI framework, the framework will retry the allocation as a single MSI
vector, assuming that meets the min_vecs specified by the requesting
driver.

Hyper-V advertises that multi-MSI is supported, but reuses the VECTOR
domain to implement that for x86.  The VECTOR domain does not support
multi-MSI, so the alloc will always fail and fallback to a single MSI
allocation.

In short, Hyper-V advertises a capability it does not implement.

Hyper-V can support multi-MSI because it coordinates with the hypervisor
to map the MSIs in the IOMMU's interrupt remapper, which is something the
VECTOR domain does not have.  Therefore the fix is simple - copy what the
x86 IOMMU drivers (AMD/Intel-IR) do by removing
X86_IRQ_ALLOC_CONTIGUOUS_VECTORS after calling the VECTOR domain's
pci_msi_prepare().

Fixes: 4daace0d ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1649856981-14649-1-git-send-email-quic_jhugo@quicinc.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

Hyper-V may offer an Initial Machine Configuration (IMC) synthetic
device to guest VMs. The device may be used by Windows guests to get
specialization information, such as the hostname.  But the device
is not used in Linux and there is no Linux driver, so it is
unsupported.

Currently, the IMC device GUID is not recognized by the VMbus driver,
which results in an "Unknown GUID" error message during boot. Add
the GUID to the list of known but unsupported devices so that the
error message is not generated. Other than avoiding the error message,
there is no change in guest behavior.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1649818140-100953-1-git-send-email-mikelley@microsoft.comSigned-off-by: Wei Liu <wei.liu@kernel.org>

Pull scheduler fix from Borislav Petkov:

 - Fix a corner case when calculating sched runqueue variables

That fix also removes a check for a zero divisor in the code, without
mentioning it.  Vincent clarified that it's ok after I whined about it:

  https://lore.kernel.org/all/CAKfTPtD2QEyZ6ADd5WrwETMOX0XOwJGnVddt7VHgfURdqgOS-Q@mail.gmail.com/

* tag 'sched_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/pelt: Fix attach_entity_load_avg() corner case

Pull powerpc fixes from Michael Ellerman:

 - Partly revert a change to our timer_interrupt() that caused lockups
   with high res timers disabled.

 - Fix a bug in KVM TCE handling that could corrupt kernel memory.

 - Two commits fixing Power9/Power10 perf alternative event selection.

Thanks to Alexey Kardashevskiy, Athira Rajeev, David Gibson, Frederic
Barrat, Madhavan Srinivasan, Miguel Ojeda, and Nicholas Piggin.

* tag 'powerpc-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/perf: Fix 32bit compile
  powerpc/perf: Fix power10 event alternatives
  powerpc/perf: Fix power9 event alternatives
  KVM: PPC: Fix TCE handling for VFIO
  powerpc/time: Always set decrementer in timer_interrupt()

Pull perf fixes from Borislav Petkov:

 - Add Sapphire Rapids CPU support

 - Fix a perf vmalloc-ed buffer mapping error (PERF_USE_VMALLOC in use)

* tag 'perf_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/cstate: Add SAPPHIRERAPIDS_X CPU support
  perf/core: Fix perf_mmap fail when CONFIG_PERF_USE_VMALLOC enabled

Pull EDAC fix from Borislav Petkov:

 - Read the reported error count from the proper register on
   synopsys_edac

* tag 'edac_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/synopsys: Read the error count from the correct register

Since commit 559089e0 ("vmalloc: replace VM_NO_HUGE_VMAP with
VM_ALLOW_HUGE_VMAP"), the use of hugepage mappings for vmalloc is an
opt-in strategy, because it caused a number of problems that weren't
noticed until x86 enabled it too.

One of the issues was fixed by Nick Piggin in commit 3b8000ae
("mm/vmalloc: huge vmalloc backing pages should be split rather than
compound"), but I'm still worried about page protection issues, and
VM_FLUSH_RESET_PERMS in particular.

However, like the hash table allocation case (commit f2edd118:
"page_alloc: use vmalloc_huge for large system hash"), the use of
kvmalloc() should be safe from any such games, since the returned
pointer might be a SLUB allocation, and as such no user should
reasonably be using it in any odd ways.

We also know that the allocations are fairly large, since it falls back
to the vmalloc case only when a kmalloc() fails.  So using a hugepage
mapping seems both safe and relevant.

This patch does show a weakness in the opt-in strategy: since the opt-in
flag is in the 'vm_flags', not the usual gfp_t allocation flags, very
few of the usual interfaces actually expose it.

That's not much of an issue in this case that already used one of the
fairly specialized low-level vmalloc interfaces for the allocation, but
for a lot of other vmalloc() users that might want to opt in, it's going
to be very inconvenient.

We'll either have to fix any compatibility problems, or expose it in the
gfp flags (__GFP_COMP would have made a lot of sense) to allow normal
vmalloc() users to use hugepage mappings.  That said, the cases that
really matter were probably already taken care of by the hash tabel
allocation.

Link: https://lore.kernel.org/all/20220415164413.2727220-1-song@kernel.org/
Link: https://lore.kernel.org/all/CAHk-=whao=iosX1s5Z4SF-ZGa-ebAukJoAdUJFk5SPwnofV+Vg@mail.gmail.com/
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Song Liu <songliubraving@fb.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use vmalloc_huge() in alloc_large_system_hash() so that large system
hash (>= PMD_SIZE) could benefit from huge pages.

Note that vmalloc_huge only allocates huge pages for systems with
HAVE_ARCH_HUGE_VMALLOC.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ksmbd server fixes from Steve French:

 - cap maximum sector size reported to avoid mount problems

 - reference count fix

 - fix filename rename race

* tag '5.18-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATION
  ksmbd: increment reference count of parent fp
  ksmbd: remove filename in ksmbd_file

Pull ARC fixes from Vineet Gupta:

 - Assorted fixes

* tag 'arc-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: remove redundant READ_ONCE() in cmpxchg loop
  ARC: atomic: cleanup atomic-llsc definitions
  arc: drop definitions of pgd_index() and pgd_offset{, _k}() entirely
  ARC: dts: align SPI NOR node name with dtschema
  ARC: Remove a redundant memset()
  ARC: fix typos in comments
  ARC: entry: fix syscall_trace_exit argument

Pull SCSI fix from James Bottomley:
 "One fix for an information leak caused by copying a buffer to
  userspace without checking for error first in the sr driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sr: Do not leak information in ioctl

Pull xen fixes from Juergen Gross:
 "A simple cleanup patch and a refcount fix for Xen on Arm"

* tag 'for-linus-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm/xen: Fix some refcount leaks
  xen: Convert kmap() to kmap_local_page()

Pull more drm fixes from Dave Airlie:
 "Maarten was away, so Maxine stepped up and sent me the drm-fixes
  merge, so no point leaving it for another week.

  The big change is an OF revert around bridge/panels, it may have some
  driver fallout, but hopefully this revert gets them shook out in the
  next week easier.

  Otherwise it's a bunch of locking/refcounts across drivers, a radeon
  dma_resv logic fix and some raspberry pi panel fixes.

  panel:
   - revert of patch that broke panel/bridge issues

  dma-buf:
   - remove unused header file.

  amdgpu:
   - partial revert of locking change

  radeon:
   - fix dma_resv logic inversion

  panel:
   - pi touchscreen panel init fixes

  vc4:
   - build fix
   - runtime pm refcount fix

  vmwgfx:
   - refcounting fix"

* tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: partial revert "remove ctx->lock" v2
  Revert "drm: of: Lookup if child node has panel or bridge"
  Revert "drm: of: Properly try all possible cases for bridge/panel detection"
  drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
  drm/vmwgfx: Fix gem refcounting and memory evictions
  drm/vc4: Fix build error when CONFIG_DRM_VC4=y && CONFIG_RASPBERRYPI_FIRMWARE=m
  drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare
  drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised
  dma-buf-map: remove renamed header file
  drm/radeon: fix logic inversion in radeon_sync_resv

Pull input fixes from Dmitry Torokhov:

 - a new set of keycodes to be used by marine navigation systems

 - minor fixes to omap4-keypad and cypress-sf drivers

* tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add Marine Navigation Keycodes
  Input: omap4-keypad - fix pm_runtime_get_sync() error checking
  Input: cypress-sf - register a callback to disable the regulators

Pull block fixes from Jens Axboe:
 "Just two small regression fixes for bcache"

* tag 'block-5.18-2022-04-22' of git://git.kernel.dk/linux-block:
  bcache: fix wrong bdev parameter when calling bio_alloc_clone() in do_bio_hook()
  bcache: put bch_bio_map() back to correct location in journal_write_unlocked()

Pull io_uring fixes from Jens Axboe:
 "Just two small fixes - one fixing a potential leak for the iovec for
  larger requests added in this cycle, and one fixing a theoretical leak
  with CQE_SKIP and IOPOLL"

* tag 'io_uring-5.18-2022-04-22' of git://git.kernel.dk/linux-block:
  io_uring: fix leaks on IOPOLL and CQE_SKIP
  io_uring: free iovec if file assignment fails

Merge tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix header include for LLVM >= 14 when building with libclang.

 - Allow access to 'data_src' for auxtrace in 'perf script' with ARM SPE
   perf.data files, fixing processing data with such attributes.

 - Fix error message for test case 71 ("Convert perf time to TSC") on
   s390, where it is not supported.

* tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf test: Fix error message for test case 71 on s390, where it is not supported
  perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event
  perf script: Always allow field 'data_src' for auxtrace
  perf clang: Fix header include for LLVM >= 14

Add a struct page forward declaration to cacheflush_32.h.
Fixes this build warning:

    CC      drivers/crypto/xilinx/zynqmp-sha.o
  In file included from arch/sparc/include/asm/cacheflush.h:11,
                   from include/linux/cacheflush.h:5,
                   from drivers/crypto/xilinx/zynqmp-sha.c:6:
  arch/sparc/include/asm/cacheflush_32.h:38:37: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
     38 | void sparc_flush_page_to_ram(struct page *page);

Exposed by commit 0e03b8fd ("crypto: xilinx - Turn SHA into a
tristate and allow COMPILE_TEST") but not Fixes: that commit because the
underlying problem is older.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: sparclinux@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Two fixes for the raspberrypi panel initialisation, one fix for a logic
inversion in radeon, a build and pm refcounting fix for vc4, two reverts
for drm_of_get_bridge that caused a number of regression and a locking
regression for amdgpu.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084403.2xrhf3jusdej5yo4@houat

Pull ext4 fixes from Ted Ts'o:
 "Fix some syzbot-detected bugs, as well as other bugs found by I/O
  injection testing.

  Change ext4's fallocate to consistently drop set[ug]id bits when an
  fallocate operation might possibly change the user-visible contents of
  a file.

  Also, improve handling of potentially invalid values in the the
  s_overhead_cluster superblock field to avoid ext4 returning a negative
  number of free blocks"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: fix a potential race while discarding reserved buffers after an abort
  ext4: update the cached overhead value in the superblock
  ext4: force overhead calculation if the s_overhead_cluster makes no sense
  ext4: fix overhead calculation to account for the reserved gdt blocks
  ext4, doc: fix incorrect h_reserved size
  ext4: limit length to bitmap_maxbytes - blocksize in punch_hole
  ext4: fix use-after-free in ext4_search_dir
  ext4: fix bug_on in start_this_handle during umount filesystem
  ext4: fix symlink file size not match to file content
  ext4: fix fallocate to use file_modified to update permissions consistently

Pull ATA fix from Damien Le Moal:
 "A single fix to avoid a NULL pointer dereference in the pata_marvell
  driver with adapters not supporting DMA, from Zheyu"

* tag 'ata-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_marvell: Check the 'bmdma_addr' beforing reading

Pull kvm fixes from Paolo Bonzini:
 "The main and larger change here is a workaround for AMD's lack of
  cache coherency for encrypted-memory guests.

  I have another patch pending, but it's waiting for review from the
  architecture maintainers.

  RISC-V:

   - Remove 's' & 'u' as valid ISA extension

   - Do not allow disabling the base extensions 'i'/'m'/'a'/'c'

  x86:

   - Fix NMI watchdog in guests on AMD

   - Fix for SEV cache incoherency issues

   - Don't re-acquire SRCU lock in complete_emulated_io()

   - Avoid NULL pointer deref if VM creation fails

   - Fix race conditions between APICv disabling and vCPU creation

   - Bugfixes for disabling of APICv

   - Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume

  selftests:

   - Do not use bitfields larger than 32-bits, they differ between GCC
     and clang"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: selftests: introduce and use more page size-related constants
  kvm: selftests: do not use bitfields larger than 32-bits for PTEs
  KVM: SEV: add cache flush to solve SEV cache incoherency issues
  KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
  KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
  KVM: selftests: Silence compiler warning in the kvm_page_table_test
  KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
  x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
  KVM: SPDX style and spelling fixes
  KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
  KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
  KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
  KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
  KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
  KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
  KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
  KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
  RISC-V: KVM: Restrict the extensions that can be disabled
  RISC-V: KVM: Remove 's' & 'u' as valid ISA extension

Test case 71 'Convert perf time to TSC' is not supported on s390.

Subtest 71.1 is skipped with the correct message, but subtest 71.2 is
not skipped and fails.

The root cause is function evlist__open() called from
test__perf_time_to_tsc().  evlist__open() returns -ENOENT because the
event cycles:u is not supported by the selected PMU, for example
platform s390 on z/VM or an x86_64 virtual machine.

The PMU driver returns -ENOENT in this case. This error is leads to the
failure.

Fix this by returning TEST_SKIP on -ENOENT.

Output before:
 71: Convert perf time to TSC:
 71.1: TSC support:             Skip (This architecture does not support)
 71.2: Perf time to TSC:        FAILED!

Output after:
 71: Convert perf time to TSC:
 71.1: TSC support:             Skip (This architecture does not support)
 71.2: Perf time to TSC:        Skip (perf_read_tsc_conversion is not supported)

This also happens on an x86_64 virtual machine:
   # uname -m
   x86_64
   $ ./perf test -F 71
    71: Convert perf time to TSC  :
    71.1: TSC support             : Ok
    71.2: Perf time to TSC        : FAILED!
   $

Committer testing:

Continues to work on x86_64:

  $ perf test 71
   71: Convert perf time to TSC    :
   71.1: TSC support               : Ok
   71.2: Perf time to TSC          : Ok
  $

Fixes: 290fa68b ("perf test tsc: Fix error message when not supported")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chengdong Li <chengdongli@tencent.com>
Cc: chengdongli@tencent.com
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220420062921.1211825-1-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>