- 18 May, 2020 40 commits
-
-
Ravi Bangoria authored
So far we had only one watchpoint, so we have hardcoded HBP_NUM to 1. But Power10 is introducing 2nd DAWR and thus kernel should be able to dynamically find actual number of watchpoints supported by hw it's running on. Introduce function for the same. Also convert HBP_NUM macro to HBP_NUM_MAX, which will now represent maximum number of watchpoints supported by Powerpc. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Michael Neuling <mikey@neuling.org> Link: https://lore.kernel.org/r/20200514111741.97993-4-ravi.bangoria@linux.ibm.com
-
Ravi Bangoria authored
Power10 is introducing second DAWR. Add SPRN_ macros for the same. Signed-off-by:
-
Ravi Bangoria authored
Power10 is introducing second DAWR. Use real register names from ISA for current macros: s/SPRN_DAWR/SPRN_DAWR0/ s/SPRN_DAWRX/SPRN_DAWRX0/ Signed-off-by:
-
Jordan Niethe authored
This adds emulation support for the following prefixed Fixed-Point Arithmetic instructions: * Prefixed Add Immediate (paddi) Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Reviewed-by:
Balamuruhan S <bala24@linux.ibm.com> [mpe: Squash in get_op() usage] Signed-off-by:
-
Jordan Niethe authored
This adds emulation support for the following prefixed integer load/stores: * Prefixed Load Byte and Zero (plbz) * Prefixed Load Halfword and Zero (plhz) * Prefixed Load Halfword Algebraic (plha) * Prefixed Load Word and Zero (plwz) * Prefixed Load Word Algebraic (plwa) * Prefixed Load Doubleword (pld) * Prefixed Store Byte (pstb) * Prefixed Store Halfword (psth) * Prefixed Store Word (pstw) * Prefixed Store Doubleword (pstd) * Prefixed Load Quadword (plq) * Prefixed Store Quadword (pstq) the follow prefixed floating-point load/stores: * Prefixed Load Floating-Point Single (plfs) * Prefixed Load Floating-Point Double (plfd) * Prefixed Store Floating-Point Single (pstfs) * Prefixed Store Floating-Point Double (pstfd) and for the following prefixed VSX load/stores: * Prefixed Load VSX Scalar Doubleword (plxsd) * Prefixed Load VSX Scalar Single-Precision (plxssp) * Prefixed Load VSX Vector [0|1] (plxv, plxv0, plxv1) * Prefixed Store VSX Scalar Doubleword (pstxsd) * Prefixed Store VSX Scalar Single-Precision (pstxssp) * Prefixed Store VSX Vector [0|1] (pstxv, pstxv0, pstxv1) Signed-off-by:
-
Jordan Niethe authored
If a prefixed instruction results in an alignment exception, the SRR1_PREFIXED bit is set. The handler attempts to emulate the responsible instruction and then increment the NIP past it. Use SRR1_PREFIXED to determine by how much the NIP should be incremented. Prefixed instructions are not permitted to cross 64-byte boundaries. If they do the alignment interrupt is invoked with SRR1 BOUNDARY bit set. If this occurs send a SIGBUS to the offending process if in user mode. If in kernel mode call bad_page_fault(). Signed-off-by:
Alistair Popple <alistair@popple.id.au> Link: https://lore.kernel.org/r/20200506034050.24806-29-jniethe5@gmail.com
-
Jordan Niethe authored
Do not allow inserting breakpoints on the suffix of a prefix instruction in kprobes. Signed-off-by:
-
Jordan Niethe authored
Do not allow placing xmon breakpoints on the suffix of a prefix instruction. Signed-off-by:
-
Jordan Niethe authored
Expand the feature-fixups self-tests to includes tests for prefixed instructions. Signed-off-by:
-
Jordan Niethe authored
Expand the code-patching self-tests to includes tests for patching prefixed instructions. Signed-off-by:
-
Jordan Niethe authored
For powerpc64, redefine the ppc_inst type so both word and prefixed instructions can be represented. On powerpc32 the type will remain the same. Update places which had assumed instructions to be 4 bytes long. Signed-off-by:
-
Jordan Niethe authored
Currently patch_imm32_load_insns() is used to load an instruction to r4 to be emulated by emulate_step(). For prefixed instructions we would like to be able to load a 64bit immediate to r4. To prepare for this make patch_imm64_load_insns() take an argument that decides which register to load an immediate to - rather than hardcoding r3. Signed-off-by:
-
Jordan Niethe authored
Add the BOUNDARY SRR1 bit definition for when the cause of an alignment exception is a prefixed instruction that crosses a 64-byte boundary. Add the PREFIXED SRR1 bit definition for exceptions caused by prefixed instructions. Bit 35 of SRR1 is called SRR1_ISI_N_OR_G. This name comes from it being used to indicate that an ISI was due to the access being no-exec or guarded. ISA v3.1 adds another purpose. It is also set if there is an access in a cache-inhibited location for prefixed instruction. Rename from SRR1_ISI_N_OR_G to SRR1_ISI_N_G_OR_CIP. Signed-off-by:
-
Alistair Popple authored
Prefix instructions have their own FSCR bit which needs to enabled via a CPU feature. The kernel will save the FSCR for problem state but it needs to be enabled initially. If prefixed instructions are made unavailable by the [H]FSCR, attempting to use them will cause a facility unavailable exception. Add "PREFIX" to the facility_strings[]. Currently there are no prefixed instructions that are actually emulated by emulate_instruction() within facility_unavailable_exception(). However, when caused by a prefixed instructions the SRR1 PREFIXED bit is set. Prepare for dealing with emulated prefixed instructions by checking for this bit. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Link: https://lore.kernel.org/r/20200506034050.24806-22-jniethe5@gmail.com
-
Jordan Niethe authored
test_translate_branch() uses two pointers to instructions within a buffer, p and q, to test patch_branch(). The pointer arithmetic done on them assumes a size of 4. This will not work if the instruction length changes. Instead do the arithmetic relative to the void * to the buffer. Signed-off-by:
-
Jordan Niethe authored
When a new breakpoint is created, the second instruction of that breakpoint is patched with a trap instruction. This assumes the length of the instruction is always the same. In preparation for prefixed instructions, remove this assumption. Insert the trap instruction at the same time the first instruction is inserted. Signed-off-by:
-
Jordan Niethe authored
Currently in xmon, mread() is used for reading instructions. In preparation for prefixed instructions, create and use a new function, mread_instr(), especially for reading instructions. Signed-off-by:
-
Jordan Niethe authored
Currently all instructions have the same length, but in preparation for prefixed instructions introduce a function for returning instruction length. Signed-off-by:
-
Jordan Niethe authored
Define specialised get_user_instr(), __get_user_instr() and __get_user_instr_inatomic() macros for reading instructions from user and/or kernel space. Signed-off-by:
-
Jordan Niethe authored
Instead of using memcpy() and flush_icache_range() use patch_instruction() which not only accomplishes both of these steps but will also make it easier to add support for prefixed instructions. Signed-off-by:
-
Jordan Niethe authored
Introduce a probe_kernel_read_inst() function to use in cases where probe_kernel_read() is used for getting an instruction. This will be more useful for prefixed instructions. Signed-off-by:
-
Jordan Niethe authored
Introduce a probe_user_read_inst() function to use in cases where probe_user_read() is used for getting an instruction. This will be more useful for prefixed instructions. Signed-off-by:
-
Jordan Niethe authored
Prefixed instructions will mean there are instructions of different length. As a result dereferencing a pointer to an instruction will not necessarily give the desired result. Introduce a function for reading instructions from memory into the instruction data type. Signed-off-by:
-
Jordan Niethe authored
Currently unsigned ints are used to represent instructions on powerpc. This has worked well as instructions have always been 4 byte words. However, ISA v3.1 introduces some changes to instructions that mean this scheme will no longer work as well. This change is Prefixed Instructions. A prefixed instruction is made up of a word prefix followed by a word suffix to make an 8 byte double word instruction. No matter the endianness of the system the prefix always comes first. Prefixed instructions are only planned for powerpc64. Introduce a ppc_inst type to represent both prefixed and word instructions on powerpc64 while keeping it possible to exclusively have word instructions on powerpc32. Signed-off-by:
-
Jordan Niethe authored
In preparation for an instruction data type that can not be directly used with the '==' operator use functions for checking equality. Signed-off-by:
-
Jordan Niethe authored
Use a function for byte swapping instructions in preparation of a more complicated instruction type. Signed-off-by:
-
Jordan Niethe authored
In preparation for using a data type for instructions that can not be directly used with the '>>' operator use a function for getting the op code of an instruction. Signed-off-by:
-
Jordan Niethe authored
In preparation for introducing a more complicated instruction type to accommodate prefixed instructions use an accessor for getting an instruction as a u32. Signed-off-by:
-
Jordan Niethe authored
In preparation for instructions having a more complex data type start using a macro, ppc_inst(), for making an instruction out of a u32. A macro is used so that instructions can be used as initializer elements. Currently this does nothing, but it will allow for creating a data type that can represent prefixed instructions. Signed-off-by:
-
Jordan Niethe authored
create_branch(), create_cond_branch() and translate_branch() return the instruction that they create, or return 0 to signal an error. Separate these concerns in preparation for an instruction type that is not just an unsigned int. Fill the created instruction to a pointer passed as the first parameter to the function and use a non-zero return value to signify an error. Signed-off-by:
-
Jordan Niethe authored
A modulo operation is used for calculating the current offset from a breakpoint within the breakpoint table. As instruction lengths are always a power of 2, this can be replaced with a bitwise 'and'. The current check for word alignment can be replaced with checking that the lower 2 bits are not set. Suggested-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Jordan Niethe authored
The instructions for xmon's breakpoint are stored bpt_table[] which is in the data section. This is problematic as the data section may be marked as no execute. Move bpt_table[] to the text section. Signed-off-by:
-
Jordan Niethe authored
To execute an instruction out of line after a breakpoint, the NIP is set to the address of struct bpt::instr. Here a copy of the instruction that was replaced with a breakpoint is kept, along with a trap so normal flow can be resumed after XOLing. The struct bpt's are located within the data section. This is problematic as the data section may be marked as no execute. Instead of each struct bpt holding the instructions to be XOL'd, make a new array, bpt_table[], with enough space to hold instructions for the number of supported breakpoints. A later patch will move this to the text section. Make struct bpt::instr a pointer to the instructions in bpt_table[] associated with that breakpoint. This association is a simple mapping: bpts[n] -> bpt_table[n * words per breakpoint]. Currently we only need the copied instruction followed by a trap, so 2 words per breakpoint. Signed-off-by:
-
Jordan Niethe authored
For modifying instructions in xmon, patch_instruction() can serve the same role that store_inst() is performing with the advantage of not being specific to xmon. In some places patch_instruction() is already being using followed by store_inst(). In these cases just remove the store_inst(). Otherwise replace store_inst() with patch_instruction(). Signed-off-by:
-
Geoff Levand authored
The ps3_mm_region_destroy() and ps3_mm_vas_destroy() routines are called very late in the shutdown via kexec's mmu_cleanup_all routine. By the time mmu_cleanup_all runs it is too late to use udbg_printf, and calling it will cause PS3 systems to hang. Remove all debugging statements from ps3_mm_region_destroy() and ps3_mm_vas_destroy() and replace any error reporting with calls to lv1_panic. With this change builds with 'DEBUG' defined will not cause kexec reboots to hang, and builds with 'DEBUG' defined or not will end in lv1_panic if an error is encountered. Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
Emmanuel Nicolet authored
Since commit dcebd755 ("block: use bio_for_each_bvec() to compute multi-page bvec count"), the kernel will bug_on on the PS3 because bio_split() is called with sectors == 0: kernel BUG at block/bio.c:1853! Oops: Exception in kernel mode, sig: 5 [#1] BE PAGE_SIZE=4K MMU=Hash PREEMPT SMP NR_CPUS=8 NUMA PS3 Modules linked in: firewire_sbp2 rtc_ps3(+) soundcore ps3_gelic(+) \ ps3rom(+) firewire_core ps3vram(+) usb_common crc_itu_t CPU: 0 PID: 97 Comm: blkid Not tainted 5.3.0-rc4 #1 NIP: c00000000027d0d0 LR: c00000000027d0b0 CTR: 0000000000000000 REGS: c00000000135ae90 TRAP: 0700 Not tainted (5.3.0-rc4) MSR: 8000000000028032 <SF,EE,IR,DR,RI> CR: 44008240 XER: 20000000 IRQMASK: 0 GPR00: c000000000289368 c00000000135b120 c00000000084a500 c000000004ff8300 GPR04: 0000000000000c00 c000000004c905e0 c000000004c905e0 000000000000ffff GPR08: 0000000000000000 0000000000000001 0000000000000000 000000000000ffff GPR12: 0000000000000000 c0000000008ef000 000000000000003e 0000000000080001 GPR16: 0000000000000100 000000000000ffff 0000000000000000 0000000000000004 GPR20: c00000000062fd7e 0000000000000001 000000000000ffff 0000000000000080 GPR24: c000000000781788 c00000000135b350 0000000000000080 c000000004c905e0 GPR28: c00000000135b348 c000000004ff8300 0000000000000000 c000000004c90000 NIP [c00000000027d0d0] .bio_split+0x28/0xac LR [c00000000027d0b0] .bio_split+0x8/0xac Call Trace: [c00000000135b120] [c00000000027d130] .bio_split+0x88/0xac (unreliable) [c00000000135b1b0] [c000000000289368] .__blk_queue_split+0x11c/0x53c [c00000000135b2d0] [c00000000028f614] .blk_mq_make_request+0x80/0x7d4 [c00000000135b3d0] [c000000000283a8c] .generic_make_request+0x118/0x294 [c00000000135b4b0] [c000000000283d34] .submit_bio+0x12c/0x174 [c00000000135b580] [c000000000205a44] .mpage_bio_submit+0x3c/0x4c [c00000000135b600] [c000000000206184] .mpage_readpages+0xa4/0x184 [c00000000135b750] [c0000000001ff8fc] .blkdev_readpages+0x24/0x38 [c00000000135b7c0] [c0000000001589f0] .read_pages+0x6c/0x1a8 [c00000000135b8b0] [c000000000158c74] .__do_page_cache_readahead+0x118/0x184 [c00000000135b9b0] [c0000000001591a8] .force_page_cache_readahead+0xe4/0xe8 [c00000000135ba50] [c00000000014fc24] .generic_file_read_iter+0x1d8/0x830 [c00000000135bb50] [c0000000001ffadc] .blkdev_read_iter+0x40/0x5c [c00000000135bbc0] [c0000000001b9e00] .new_sync_read+0x144/0x1a0 [c00000000135bcd0] [c0000000001bc454] .vfs_read+0xa0/0x124 [c00000000135bd70] [c0000000001bc7a4] .ksys_read+0x70/0xd8 [c00000000135be20] [c00000000000a524] system_call+0x5c/0x70 Instruction dump: 7fe3fb78 482e30dc 7c0802a6 482e3085 7c9e2378 f821ff71 7ca42b78 7d3e00d0 7c7d1b78 79290fe0 7cc53378 69290001 <0b090000> 81230028 7bca0020 7929ba62 [ end trace 313fec760f30aa1f ]--- The problem originates from setting the segment boundary of the request queue to -1UL. This makes get_max_segment_size() return zero when offset is zero, whatever the max segment size. The test with BLK_SEG_BOUNDARY_MASK fails and 'mask - (mask & offset) + 1' overflows to zero in the return statement. Not setting the segment boundary and using the default value (BLK_SEG_BOUNDARY_MASK) fixes the problem. Signed-off-by:
Emmanuel Nicolet <emmanuel.nicolet@gmail.com> Signed-off-by:
-
Markus Elfring authored
Remove an extra message for a memory allocation failure in function gelic_descr_prepare_rx(). Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
Remove duplicate memory allocation failure error messages. Signed-off-by:
-
Geoff Levand authored
Remove the '-m4' option to grep to allow grep to process all of nm's output. This avoids the nm warning: nm terminated with signal 13 [Broken pipe] Signed-off-by:
-
Geoff Levand authored
To aid debugging wrapper troubles, output a linker map file 'wrapper.map' when the build is verbose. Signed-off-by:
-
