Pull nfsd fixes from Bruce Fields:
 "Three miscellaneous bugfixes, most importantly the clp->cl_revoked
  bug, which we've seen several reports of people hitting"

* 'for-4.0' of git://linux-nfs.org/~bfields/linux:
  sunrpc: integer underflow in rsc_parse()
  nfsd: fix clp->cl_revoked list deletion causing softlock in nfsd
  svcrpc: fix memory leak in gssp_accept_sec_context_upcall

Pull networking fixes from David Miller:

 1) If an IPVS tunnel is created with a mixed-family destination
    address, it cannot be removed.  Fix from Alexey Andriyanov.

 2) Fix module refcount underflow in netfilter's nft_compat, from Pablo
    Neira Ayuso.

 3) Generic statistics infrastructure can reference variables sitting on
    a released function stack, therefore use dynamic allocation always.
    Fix from Ignacy Gawędzki.

 4) skb_copy_bits() return value test is inverted in ip_check_defrag().

 5) Fix network namespace exit in openvswitch, we have to release all of
    the per-net vports.  From Pravin B Shelar.

 6) Fix signedness bug in CAIF's cfpkt_iterate(), from Dan Carpenter.

 7) Fix rhashtable grow/shrink behavior, only expand during inserts and
    shrink during deletes.  From Daniel Borkmann.

 8) Netdevice names with semicolons should never be allowed, because
    they serve as a separator.  From Matthew Thode.

 9) Use {,__}set_current_state() where appropriate, from Fabian
    Frederick.

10) Revert byte queue limits support in r8169 driver, it's causing
    regressions we can't figure out.

11) tcp_should_expand_sndbuf() erroneously uses tp->packets_out to
    measure packets in flight, properly use tcp_packets_in_flight()
    instead.  From Neal Cardwell.

12) Fix accidental removal of support for bluetooth in CSR based Intel
    wireless cards.  From Marcel Holtmann.

13) We accidently added a behavioral change between native and compat
    tasks, wrt testing the MSG_CMSG_COMPAT bit.  Just ignore it if the
    user happened to set it in a native binary as that was always the
    behavior we had.  From Catalin Marinas.

14) Check genlmsg_unicast() return valud in hwsim netlink tx frame
    handling, from Bob Copeland.

15) Fix stale ->radar_required setting in mac80211 that can prevent
    starting new scans, from Eliad Peller.

16) Fix memory leak in nl80211 monitor, from Johannes Berg.

17) Fix race in TX index handling in xen-netback, from David Vrabel.

18) Don't enable interrupts in amx-xgbe driver until all software et al.
    state is ready for the interrupt handler to run.  From Thomas
    Lendacky.

19) Add missing netlink_ns_capable() checks to rtnl_newlink(), from Eric
    W Biederman.

20) The amount of header space needed in macvtap was not calculated
    properly, fix it otherwise we splat past the beginning of the
    packet.  From Eric Dumazet.

21) Fix bcmgenet TCP TX perf regression, from Jaedon Shin.

22) Don't raw initialize or mod timers, use setup_timer() and
    mod_timer() instead.  From Vaishali Thakkar.

23) Fix software maintained statistics in bcmgenet and systemport
    drivers, from Florian Fainelli.

24) DMA descriptor updates in sh_eth need proper memory barriers, from
    Ben Hutchings.

25) Don't do UDP Fragmentation Offload on RAW sockets, from Michal
    Kubecek.

26) Openvswitch's non-masked set actions aren't constructed properly
    into netlink messages, fix from Joe Stringer.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
  openvswitch: Fix serialization of non-masked set actions.
  gianfar: Reduce logging noise seen due to phy polling if link is down
  ibmveth: Add function to enable live MAC address changes
  net: bridge: add compile-time assert for cb struct size
  udp: only allow UFO for packets from SOCK_DGRAM sockets
  sh_eth: Really fix padding of short frames on TX
  Revert "sh_eth: Enable Rx descriptor word 0 shift for r8a7790"
  sh_eth: Fix RX recovery on R-Car in case of RX ring underrun
  sh_eth: Ensure proper ordering of descriptor active bit write/read
  net/mlx4_en: Disbale GRO for incoming loopback/selftest packets
  net/mlx4_core: Fix wrong mask and error flow for the update-qp command
  net: systemport: fix software maintained statistics
  net: bcmgenet: fix software maintained statistics
  rxrpc: don't multiply with HZ twice
  rxrpc: terminate retrans loop when sending of skb fails
  net/hsr: Fix NULL pointer dereference and refcnt bugs when deleting a HSR interface.
  net: pasemi: Use setup_timer and mod_timer
  net: stmmac: Use setup_timer and mod_timer
  net: 8390: axnet_cs: Use setup_timer and mod_timer
  net: 8390: pcnet_cs: Use setup_timer and mod_timer
  ...

Set actions consist of a regular OVS_KEY_ATTR_* attribute nested inside
of a OVS_ACTION_ATTR_SET action attribute. When converting masked actions
back to regular set actions, the inner attribute length was not changed,
ie, double the length being serialized. This patch fixes the bug.

Fixes: 83d2b9ba ("net: openvswitch: Support masked set actions.")
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 6ce29b0e ("gianfar: Avoid unnecessary reg accesses in adjust_link()")
eliminates unnecessary calls to adjust_link for phy devices which don't support
interrupts and need polling. As part of that work, the 'new_state' local flag,
which was used to reduce logging noise on the console, was eliminated.

Unfortunately, that means that a 'Link is Down' log message will now be
issued continuously if a link is configured as UP, the link state is down,
and the associated phy requires polling. This occurs because priv->oldduplex
is -1 in this case, which always differs from phydev->duplex. In addition,
phydev->speed may also differ from priv->oldspeed.  gfar_update_link_state()
is therefore called each time a phy is polled, even if the link state did not
change.

Cc: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a function that will enable changing the MAC address
of an ibmveth interface while it is still running.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

make build fail if structure no longer fits into ->cb storage.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a tricky story of the new atomic state handling and the legacy
code fighting over each another. The bug at hand is an underrun of the
framebuffer reference with subsequent hilarity caused by the load
detect code. Which is peculiar since the the exact same code works
fine as the implementation of the legacy setcrtc ioctl.

Let's look at the ingredients:

- Currently our code is a crazy mix of legacy modeset interfaces to
  set the parameters and half-baked atomic state tracking underneath.
  While this transition is going we're using the transitional plane
  helpers to update the atomic side (drm_plane_helper_disable/update
  and friends), i.e. plane->state->fb. Since the state structure owns
  the fb those functions take care of that themselves.

  The legacy state (specifically crtc->primary->fb) is still managed
  by the old code (and mostly by the drm core), with the fb reference
  counting done by callers (core drm for the ioctl or the i915 load
  detect code). The relevant commit is

  commit ea2c67bb
  Author: Matt Roper <matthew.d.roper@intel.com>
  Date:   Tue Dec 23 10:41:52 2014 -0800

      drm/i915: Move to atomic plane helpers (v9)

- drm_plane_helper_disable has special code to handle multiple calls
  in a row - it checks plane->crtc == NULL and bails out. This is to
  match the proper atomic implementation which needs the crtc to get
  at the implied locking context atomic updates always need. See

  commit acf24a39
  Author: Daniel Vetter <daniel.vetter@ffwll.ch>
  Date:   Tue Jul 29 15:33:05 2014 +0200

      drm/plane-helper: transitional atomic plane helpers

- The universal plane code split out the implicit primary plane from
  the CRTC into it's own full-blown drm_plane object. As part of that
  the setcrtc ioctl (which updated both the crtc mode and primary
  plane) learned to set crtc->primary->crtc on modeset to make sure
  the plane->crtc assignments statate up to date in

  commit e13161af
  Author: Matt Roper <matthew.d.roper@intel.com>
  Date:   Tue Apr 1 15:22:38 2014 -0700

      drm: Add drm_crtc_init_with_planes() (v2)

  Unfortunately we've forgotten to update the load detect code. Which
  wasn't a problem since the load detect modeset is temporary and
  always undone before we drop the locks.

- Finally there is a organically grown history (i.e. don't ask) around
  who sets the legacy plane->fb for the various driver entry points.
  Originally updating that was the drivers duty, but for almost all
  places we've moved that (plus updating the refcounts) into the core.
  Again the exception is the load detect code.

Taking all together the following happens:
- The load detect code doesn't set crtc->primary->crtc. This is only
  really an issue on crtcs never before used or when userspace
  explicitly disabled the primary plane.

- The plane helper glue code short-circuits because of that and leaves
  a non-NULL fb behind in plane->state->fb and plane->fb. The state
  fb isn't a real problem (it's properly refcounted on its own), it's
  just the canary.

- Load detect code drops the reference for that fb, but doesn't set
  plane->fb = NULL. This is ok since it's still living in that old
  world where drivers had to clear the pointer but the core/callers
  handled the refcounting.

- On the next modeset the drm core notices plane->fb and takes care of
  refcounting it properly by doing another unref. This drops the
  refcount to zero, leaving state->plane now pointing at freed memory.

- intel_plane_duplicate_state still assume it owns a reference to that
  very state->fb and bad things start to happen.

Fix this all by applying the same duct-tape as for the legacy setcrtc
ioctl code and set crtc->primary->crtc properly.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If an over-MTU UDP datagram is sent through a SOCK_RAW socket to a
UFO-capable device, ip_ufo_append_data() sets skb->ip_summed to
CHECKSUM_PARTIAL unconditionally as all GSO code assumes transport layer
checksum is to be computed on segmentation. However, in this case,
skb->csum_start and skb->csum_offset are never set as raw socket
transmit path bypasses udp_send_skb() where they are usually set. As a
result, driver may access invalid memory when trying to calculate the
checksum and store the result (as observed in virtio_net driver).

Moreover, the very idea of modifying the userspace provided UDP header
is IMHO against raw socket semantics (I wasn't able to find a document
clearly stating this or the opposite, though). And while allowing
CHECKSUM_NONE in the UFO case would be more efficient, it would be a bit
too intrusive change just to handle a corner case like this. Therefore
disallowing UFO for packets from SOCK_DGRAM seems to be the best option.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ben Hutchings says:

====================
Fixes for sh_eth #4 v2

I'm continuing review and testing of Ethernet support on the R-Car H2
chip, with help from a colleague.  This series fixes a few more issues.

These are not tested on any of the other supported chips.

v2: Add note that the revert is not a pure revert.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

My previous fix to clear padding of short frames used skb->len as the
DMA length, assuming that skb_padto() extended skb->len to include the
padding.  That isn't the case; we need to use skb_put_padto() instead.

(This wasn't immediately obvious because software padding isn't
actually needed on the R-Car H2.  We could make it conditional on
which chip is being driven, but it's probably not worth the effort.)
Reported-by: "Violeta Menéndez González" <violeta.menendez@codethink.co.uk>
Fixes: 612a17a54b50 ("sh_eth: Fix padding of short frames on TX")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit fd9af07c.

The hardware manual states that the frame error and multicast bits are
copied to bits 9:0 of RD0, not bits 25:16.  I've tested that this is
true for RFS1 (CRC error), RFS3 (frame too short), RFS4 (frame too
long) and RFS8 (multicast).

Also adjust a comment to agree with this.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of RX ring underrun (RDE), we attempt to reset the software
descriptor pointers (dirty_rx and cur_rx) to match where the hardware
will read the next descriptor from, as that might not be the first
dirty descriptor.  This relies on reading RDFAR, but that register
doesn't exist on all supported chips - specifically, not on the R-Car
chips.  This will result in unpredictable behaviour on those chips
after an RDE.

Make this pointer reset conditional and assume that it isn't needed on
the R-Car chips.  This fix also assumes that RDFAR is never exposed at
offset 0 in the memory map - this is currently true, and a subsequent
commit will fix the ambiguity between offset 0 and no-offset in the
register offset maps.

Fixes: 79fba9f5 ("net: sh_eth: fix the rxdesc pointer when rx ...")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

When submitting a DMA descriptor, the active bit must be written last.
When reading a completed DMA descriptor, the active bit must be read
first.

Add memory barriers to ensure that this ordering is maintained.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull GPIO fixes from Linus Walleij:
 "Two GPIO fixes:

   - Fix a translation problem in of_get_named_gpiod_flags()

   - Fix a long standing container_of() mistake in the TPS65912 driver"

* tag 'gpio-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: tps65912: fix wrong container_of arguments
  gpiolib: of: allow of_gpiochip_find_and_xlate to find more than one chip per node

Merge branch 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal

Pull thermal management fixes from Eduardo Valentin:
 "Specifics:

   - Several fixes in tmon tool.

   - Fixes in intel int340x for _ART and _TRT tables.

   - Add id for Avoton SoC into powerclamp driver.

   - Fixes in RCAR thermal driver to remove race conditions and fix fail
     path

   - Fixes in TI thermal driver: removal of unnecessary code and build
     fix if !CONFIG_PM_SLEEP

   - Cleanups in exynos thermal driver

   - Add stubs for include/linux/thermal.h.  Now drivers using thermal
     calls but that also work without CONFIG_THERMAL will be able to
     compile for systems that don't care about thermal.

  Note: I am sending this pull on Rui's behalf while he fixes issues in
  his Linux box"

* 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: int340x_thermal: Ignore missing _ART, _TRT tables
  thermal/intel_powerclamp: add id for Avoton SoC
  tools/thermal: tmon: silence 'set but not used' warnings
  tools/thermal: tmon: use pkg-config to determine library dependencies
  tools/thermal: tmon: support cross-compiling
  tools/thermal: tmon: add .gitignore
  tools/thermal: tmon: fixup tui windowing calculations
  tools/thermal: tmon: tui: don't hard-code dialog window size assumptions
  tools/thermal: tmon: add min/max macros
  tools/thermal: tmon: add --target-temp parameter
  thermal: exynos: Clean-up code to use oneline entry for exynos compatible table
  thermal: rcar: Make error and remove paths symmetrical with init
  thermal: rcar: Fix race condition between init and interrupt
  thermal: Introduce dummy functions when thermal is not defined
  ti-soc-thermal: Delete an unnecessary check before the function call "cpufreq_cooling_unregister"
  thermal: ti-soc-thermal: bandgap: Fix build warning if !CONFIG_PM_SLEEP

Pull md fixes from Neil Brown:
 "Three md fixes:

   - fix a read-balance problem that was reported 2 years ago, but that
     I never noticed the report :-(

   - fix for rare RAID6 problem causing incorrect bitmap updates when
     two devices fail.

   - add __ATTR_PREALLOC annotation now that it is possible"

* tag 'md/4.0-fixes' of git://neil.brown.name/md:
  md: mark some attributes as pre-alloc
  raid5: check faulty flag for array status during recovery.
  md/raid1: fix read balance when a drive is write-mostly.

Pull arch/metag fix from James Hogan:
 "This is just a single patch to fix the KSTK_EIP() and KSTK_ESP()
  macros for metag which have always been erronously returning the PC
  and stack pointer of the task's kernel context rather than from its
  user context saved at entry from userland into the kernel, which
  affects the contents of /proc/<pid>/maps and /proc/<pid>/stat"

* tag 'metag-fixes-v4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag: Fix KSTK_EIP() and KSTK_ESP() macros

Or Gerlitz says:

====================
Mellanox driver fixes

Two small fixes, please apply to net.

Both patches should go to 3.19.y too.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Packets which are sent from the selftest (ethtool) flow,
should not be passed to GRO stack but rather dropped by
the driver after validation. To achieve that, we disable
GRO for the duration of the selftest.

Fixes: dd65beac ("net/mlx4_en: Extend usage of napi_gro_frags")
Reported-by: Carol Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bit mask for currently supported driver features (MLX4_UPDATE_QP_SUPPORTED_ATTRS)
of the update-qp command was defined twice (using enum value and pre-processor
define directive) and wrong.

The return value of the call to mlx4_update_qp() from within the SRIOV
resource-tracker was wrongly voided down.

Fix both issues.

issue: none
Fixes: 09e05c3f ('net/mlx4: Set vlan stripping policy by the right command')
Fixes: ce8d9e0d ('net/mlx4_core: Add UPDATE_QP SRIOV wrapper support')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull x86 fixes from Ingo Molnar:
 "A CR4-shadow 32-bit init fix, plus two typo fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Init per-cpu shadow copy of CR4 on 32-bit CPUs too
  x86/platform/intel-mid: Fix trivial printk message typo in intel_mid_arch_setup()
  x86/cpu/intel: Fix trivial typo in intel_tlb_table[]

Pull timer fixes from Ingo Molnar:
 "Three clockevents/clocksource driver fixes"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: pxa: Fix section mismatch
  clocksource: mtk: Fix race conditions in probe code
  clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfig

Pull perf fixes from Ingo Molnar:
 "Two kprobes fixes and a handful of tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Make sparc64 arch point to sparc
  perf symbols: Define EM_AARCH64 for older OSes
  perf top: Fix SIGBUS on sparc64
  perf tools: Fix probing for PERF_FLAG_FD_CLOEXEC flag
  perf tools: Fix pthread_attr_setaffinity_np build error
  perf tools: Define _GNU_SOURCE on pthread_attr_setaffinity_np feature check
  perf bench: Fix order of arguments to memcpy_alloc_mem
  kprobes/x86: Check for invalid ftrace location in __recover_probed_insn()
  kprobes/x86: Use 5-byte NOP when the code might be modified by ftrace

Pull locking fix from Ingo Molnar:
 "An rtmutex deadlock path fixlet"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Set state back to running on error

Florian Fainelli says:

====================
net: bcmgenet and systemport statistics fixes

This two patches fix a similar problem in the GENET and SYSTEMPORT drivers
for software maintained statistics used to track DMA mapping and SKB
re-allocation failures.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 60b4ea17 ("net: systemport: log RX buffer allocation and RX/TX DMA
failures") added a few software maintained statistics using
BCM_SYSPORT_STAT_MIB_RX and BCM_SYSPORT_STAT_MIB_TX. These statistics are read
from the hardware MIB counters, such that bcm_sysport_update_mib_counters() was
trying to read from a non-existing MIB offset for these counters.

Fix this by introducing a special type: BCM_SYSPORT_STAT_SOFT, similar to
BCM_SYSPORT_STAT_NETDEV, such that bcm_sysport_get_ethtool_stats will read from
the software mib.

Fixes: 60b4ea17 ("net: systemport: log RX buffer allocation and RX/TX DMA failures")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 44c8bc3c ("net: bcmgenet: log RX buffer allocation and RX/TX dma
failures") added a few software maintained statistics using
BCMGENET_STAT_MIB_RX and BCMGENET_STAT_MIB_TX. These statistics are read from
the hardware MIB counters, such that bcmgenet_update_mib_counters() was trying
to read from a non-existing MIB offset for these counters.

Fix this by introducing a special type: BCMGENET_STAT_SOFT, similar to
BCMGENET_STAT_NETDEV, such that bcmgenet_get_ethtool_stats will read from the
software mib.

Fixes: 44c8bc3c ("net: bcmgenet: log RX buffer allocation and RX/TX dma failures")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc_resend_timeout has an initial value of 4 * HZ; use it as-is.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Typo, 'stop' is never set to true.
Seems intent is to not attempt to retransmit more packets after sendmsg
returns an error.

This change is based on code inspection only.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

To repeat:

$ sudo ip link del hsr0
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
IP: [<ffffffff8187f495>] hsr_del_port+0x15/0xa0
etc...

Bug description:

As part of the hsr master device destruction, hsr_del_port() is called for each of
the hsr ports. At each such call, the master device is updated regarding features
and mtu. When the master device is freed before the slave interfaces, master will
be NULL in hsr_del_port(), which led to a NULL pointer dereference.

Additionally, dev_put() was called on the master device itself in hsr_del_port(),
causing a refcnt error.

A third bug in the same code path was that the rtnl lock was not taken before
hsr_del_port() was called as part of hsr_dev_destroy().

The reporter (Nicolas Dichtel) also said: "hsr_netdev_notify() supposes that the
port will always be available when the notification is for an hsr interface. It's
wrong. For example, netdev_wait_allrefs() may resend NETDEV_UNREGISTER.". As a
precaution against this, a check for port == NULL was added in hsr_dev_notify().
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Fixes: 51f3c605 ("net/hsr: Move slave init to hsr_slave.c.")
Signed-off-by: Arvid Brodin <arvid.brodin@alten.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use timer API functions setup_timer and mod_timer instead
of structure assignments as they are standard way to set
the timer and to update the expire field of an active timer
respectively.

This is done using Coccinelle and semantic patch used for
this is as follows:

// <smpl>
@@
expression x,y,z,a,b;
@@

-init_timer (&x);
+setup_timer (&x, y, z);
+mod_timer (&a, b);
-x.function = y;
-x.data = z;
-x.expires = b;
-add_timer(&a);
// </smpl>
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use timer API functions setup_timer and mod_timer instead
of structure assignments as they are standard way to set
the timer and to update the expire field of an active timer
respectively.

This is done using Coccinelle and semantic patch used for
this is as follows:

// <smpl>
@@
expression x,y,z,a,b;
@@

-init_timer (&x);
+setup_timer (&x, y, z);
+mod_timer (&a, b);
-x.function = y;
-x.data = z;
-x.expires = b;
-add_timer(&a);
// </smpl>
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use timer API functions setup_timer and mod_timer instead
of structure assignments as they are standard way to set
the timer and to update the expire field of an active timer
respectively.

This is done using Coccinelle and semantic patch used for
this is as follows:

// <smpl>
@@
expression x,y,z,a,b;
@@

-init_timer (&x);
+setup_timer (&x, y, z);
+mod_timer (&a, b);
-x.function = y;
-x.data = z;
-x.expires = b;
-add_timer(&a);
// </smpl>
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use timer API functions setup_timer and mod_timer instead
of structure assignments as they are standard way to set
the timer and to update the expire field of an active timer
respectively.

This is done using Coccinelle and semantic patch used for
this is as follows:

// <smpl>
@@
expression x,y,z,a,b;
@@

-init_timer (&x);
+setup_timer (&x, y, z);
+mod_timer (&a, b);
-x.function = y;
-x.data = z;
-x.expires = b;
-add_timer(&a);
// </smpl>
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use timer API functions setup_timer and mod_timer instead
of structure assignments as they are standard way to set
the timer and to update the expire field of an active timer
respectively.

This is done using Coccinelle and semantic patch used for
this is as follows:

// <smpl>
@@
expression x,y,z,a,b;
@@

-init_timer (&x);
+setup_timer (&x, y, z);
+mod_timer (&a, b);
-x.function = y;
-x.data = z;
-x.expires = b;
-add_timer(&a);
// </smpl>
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change 'mutliple' to 'multiple'
Change 'Firmare' to 'Firmware'
Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change 'Firmare' to 'Firmware'
Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Setting a dev_pm_ops suspend/resume pair but not a set of
hibernation functions means those pm functions will not be
called upon hibernation.
Fix this by using SIMPLE_DEV_PM_OPS, which appropriately
assigns the suspend and hibernation handlers and move
cpsw_suspend/resume calbacks under CONFIG_PM_SLEEP
to avoid build warnings.
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Setting a dev_pm_ops suspend_late/resume_early pair but not a
set of hibernation functions means those pm functions will
not be called upon hibernation.
Fix this by using SET_LATE_SYSTEM_SLEEP_PM_OPS, which appropriately
assigns the suspend and hibernation handlers and move
davinci_mdio_x callbacks under CONFIG_PM_SLEEP to avoid build warnings.
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>