- 25 Feb, 2022 5 commits
-
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Fixes for 5.17 Patch 1 fixes an issue with the SIOCOUTQ ioctl in MPTCP sockets that have performed a fallback to TCP. Patch 2 is a selftest fix to correctly remove temp files. Patch 3 fixes a shift-out-of-bounds issue found by syzkaller. ==================== Link: https://lore.kernel.org/r/20220225005259.318898-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Mat Martineau authored
Syzkaller with UBSAN uncovered a scenario where a large number of DATA_FIN retransmits caused a shift-out-of-bounds in the DATA_FIN timeout calculation: ================================================================================ UBSAN: shift-out-of-bounds in net/mptcp/protocol.c:470:29 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 1 PID: 13059 Comm: kworker/1:0 Not tainted 5.17.0-rc2-00630-g5fbf21c90c60 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: events mptcp_worker Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e lib/ubsan.c:330 mptcp_set_datafin_timeout net/mptcp/protocol.c:470 [inline] __mptcp_retrans.cold+0x72/0x77 net/mptcp/protocol.c:2445 mptcp_worker+0x58a/0xa70 net/mptcp/protocol.c:2528 process_one_work+0x9df/0x16d0 kernel/workqueue.c:2307 worker_thread+0x95/0xe10 kernel/workqueue.c:2454 kthread+0x2f4/0x3b0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ================================================================================ This change limits the maximum timeout by limiting the size of the shift, which keeps all intermediate values in-bounds. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/259 Fixes: 6477dd39 ("mptcp: Retransmit DATA_FIN") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
After commit 05be5e27 ("selftests: mptcp: add disconnect tests") the mptcp selftests leave behind a couple of tmp files after each run. run_tests_disconnect() misnames a few variables used to track them. Address the issue setting the appropriate global variables Fixes: 05be5e27 ("selftests: mptcp: add disconnect tests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
The MPTCP SIOCOUTQ implementation is not very accurate in case of fallback: it only measures the data in the MPTCP-level write queue, but it does not take in account the subflow write queue utilization. In case of fallback the first can be empty, while the latter is not. The above produces sporadic self-tests issues and can foul legit user-space application. Fix the issue additionally querying the subflow in case of fallback. Fixes: 644807e3 ("mptcp: add SIOCINQ, OUTQ and OUTQNSD ioctls") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/260Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix regression with RFCOMM - Fix regression with LE devices using Privacy (RPA) - Fix regression with LE devices not waiting proper timeout to establish connections - Fix race in smp * tag 'for-net-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: Fix not using conn_timeout Bluetooth: hci_sync: Fix hci_update_accept_list_sync Bluetooth: assign len after null check Bluetooth: Fix bt_skb_sendmmsg not allocating partial chunks Bluetooth: fix data races in smp_unregister(), smp_del_chan() Bluetooth: hci_core: Fix leaking sent_cmd skb ==================== Link: https://lore.kernel.org/r/20220224210838.197787-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 24 Feb, 2022 35 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull pci fixes from Bjorn Helgaas: - Fix a merge error that broke PCI device enumeration on mvebu platforms, including Turris Omnia (Armada 385) (Pali Rohár) - Avoid using ATS on all AMD Navi10 and Navi14 GPUs because some VBIOSes don't account for "harvested" (disabled) parts of the chip when initializing caches (Alex Deucher) * tag 'pci-v5.17-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Mark all AMD Navi10 and Navi14 GPU ATS as broken PCI: mvebu: Fix device enumeration regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. Current release - regressions: - bpf: fix crash due to out of bounds access into reg2btf_ids - mvpp2: always set port pcs ops, avoid null-deref - eth: marvell: fix driver load from initrd - eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC" Current release - new code bugs: - mptcp: fix race in overlapping signal events Previous releases - regressions: - xen-netback: revert hotplug-status changes causing devices to not be configured - dsa: - avoid call to __dev_set_promiscuity() while rtnl_mutex isn't held - fix panic when removing unoffloaded port from bridge - dsa: microchip: fix bridging with more than two member ports Previous releases - always broken: - bpf: - fix crash due to incorrect copy_map_value when both spin lock and timer are present in a single value - fix a bpf_timer initialization issue with clang - do not try bpf_msg_push_data with len 0 - add schedule points in batch ops - nf_tables: - unregister flowtable hooks on netns exit - correct flow offload action array size - fix a couple of memory leaks - vsock: don't check owner in vhost_vsock_stop() while releasing - gso: do not skip outer ip header in case of ipip and net_failover - smc: use a mutex for locking "struct smc_pnettable" - openvswitch: fix setting ipv6 fields causing hw csum failure - mptcp: fix race in incoming ADD_ADDR option processing - sysfs: add check for netdevice being present to speed_show - sched: act_ct: fix flow table lookup after ct clear or switching zones - eth: intel: fixes for SR-IOV forwarding offloads - eth: broadcom: fixes for selftests and error recovery - eth: mellanox: flow steering and SR-IOV forwarding fixes Misc: - make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends not report freed skbs as drops - force inlining of checksum functions in net/checksum.h" * tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: mv643xx_eth: process retval from of_get_mac_address ping: remove pr_err from ping_lookup Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC" openvswitch: Fix setting ipv6 fields causing hw csum failure ipv6: prevent a possible race condition with lifetimes net/smc: Use a mutex for locking "struct smc_pnettable" bnx2x: fix driver load from initrd Revert "xen-netback: Check for hotplug-status existence before watching" Revert "xen-netback: remove 'hotplug-status' once it has served its purpose" net/mlx5e: Fix VF min/max rate parameters interchange mistake net/mlx5e: Add missing increment of count net/mlx5e: MPLSoUDP decap, fix check for unsupported matches net/mlx5e: Fix MPLSoUDP encap to use MPLS action information net/mlx5e: Add feature check for set fec counters net/mlx5e: TC, Skip redundant ct clear actions net/mlx5e: TC, Reject rules with forward and drop actions net/mlx5e: TC, Reject rules with drop and modify hdr action net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets net/mlx5e: Fix wrong return value on ioctl EEPROM query failure net/mlx5: Fix possible deadlock on rule deletion ...
-
Luiz Augusto von Dentz authored
When using hci_le_create_conn_sync it shall wait for the conn_timeout since the connection complete may take longer than just 2 seconds. Also fix the masking of HCI_EV_LE_ENHANCED_CONN_COMPLETE and HCI_EV_LE_CONN_COMPLETE so they are never both set so we can predict which one the controller will use in case of HCI_OP_LE_CREATE_CONN. Fixes: 6cd29ec6 ("Bluetooth: hci_sync: Wait for proper events when connecting LE") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
hci_update_accept_list_sync is returning the filter based on the error but that gets overwritten by hci_le_set_addr_resolution_enable_sync return instead of using the actual result of the likes of hci_le_add_accept_list_sync which was intended. Fixes: ad383c2c ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Wang Qing authored
len should be assigned after a null check Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
Since bt_skb_sendmmsg can be used with the likes of SOCK_STREAM it shall return the partial chunks it could allocate instead of freeing everything as otherwise it can cause problems like bellow. Fixes: 81be03e0 ("Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/r/d7206e12-1b99-c3be-84f4-df22af427ef5@molgen.mpg.de BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215594Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> (Nokia N9 (MeeGo/Harmattan) Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Lin Ma authored
Previous commit e0448092 ("Bluetooth: defer cleanup of resources in hci_unregister_dev()") defers all destructive actions to hci_release_dev() to prevent cocurrent problems like NPD, UAF. However, there are still some exceptions that are ignored. The smp_unregister() in hci_dev_close_sync() (previously in hci_dev_do_close) will release resources like the sensitive channel and the smp_dev objects. Consider the situations the device is detaching or power down while the kernel is still operating on it, the following data race could take place. thread-A hci_dev_close_sync | thread-B read_local_oob_ext_data | hci_dev_unlock() | ... | hci_dev_lock() if (hdev->smp_data) | chan = hdev->smp_data | | chan = hdev->smp_data (3) | hdev->smp_data = NULL (1) | if (!chan || !chan->data) (4) ... | smp = chan->data | smp = chan->data if (smp) | chan->data = NULL (2) | ... | kfree_sensitive(smp) | | // dereference smp trigger UFA That is, the objects hdev->smp_data and chan->data both suffer from the data races. In a preempt-enable kernel, the above schedule (when (3) is before (1) and (4) is before (2)) leads to UAF bugs. It can be reproduced in the latest kernel and below is part of the report: [ 49.097146] ================================================================ [ 49.097611] BUG: KASAN: use-after-free in smp_generate_oob+0x2dd/0x570 [ 49.097611] Read of size 8 at addr ffff888006528360 by task generate_oob/155 [ 49.097611] [ 49.097611] Call Trace: [ 49.097611] <TASK> [ 49.097611] dump_stack_lvl+0x34/0x44 [ 49.097611] print_address_description.constprop.0+0x1f/0x150 [ 49.097611] ? smp_generate_oob+0x2dd/0x570 [ 49.097611] ? smp_generate_oob+0x2dd/0x570 [ 49.097611] kasan_report.cold+0x7f/0x11b [ 49.097611] ? smp_generate_oob+0x2dd/0x570 [ 49.097611] smp_generate_oob+0x2dd/0x570 [ 49.097611] read_local_oob_ext_data+0x689/0xc30 [ 49.097611] ? hci_event_packet+0xc80/0xc80 [ 49.097611] ? sysvec_apic_timer_interrupt+0x9b/0xc0 [ 49.097611] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 49.097611] ? mgmt_init_hdev+0x1c/0x240 [ 49.097611] ? mgmt_init_hdev+0x28/0x240 [ 49.097611] hci_sock_sendmsg+0x1880/0x1e70 [ 49.097611] ? create_monitor_event+0x890/0x890 [ 49.097611] ? create_monitor_event+0x890/0x890 [ 49.097611] sock_sendmsg+0xdf/0x110 [ 49.097611] __sys_sendto+0x19e/0x270 [ 49.097611] ? __ia32_sys_getpeername+0xa0/0xa0 [ 49.097611] ? kernel_fpu_begin_mask+0x1c0/0x1c0 [ 49.097611] __x64_sys_sendto+0xd8/0x1b0 [ 49.097611] ? syscall_exit_to_user_mode+0x1d/0x40 [ 49.097611] do_syscall_64+0x3b/0x90 [ 49.097611] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 49.097611] RIP: 0033:0x7f5a59f51f64 ... [ 49.097611] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5a59f51f64 [ 49.097611] RDX: 0000000000000007 RSI: 00007f5a59d6ac70 RDI: 0000000000000006 [ 49.097611] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 49.097611] R10: 0000000000000040 R11: 0000000000000246 R12: 00007ffec26916ee [ 49.097611] R13: 00007ffec26916ef R14: 00007f5a59d6afc0 R15: 00007f5a59d6b700 To solve these data races, this patch places the smp_unregister() function in the protected area by the hci_dev_lock(). That is, the smp_unregister() function can not be concurrently executed when operating functions (most of them are mgmt operations in mgmt.c) hold the device lock. This patch is tested with kernel LOCK DEBUGGING enabled. The price from the extended holding time of the device lock is supposed to be low as the smp_unregister() function is fairly short and efficient. Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Luiz Augusto von Dentz authored
sent_cmd memory is not freed before freeing hci_dev causing it to leak it contents. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request: - send H2CData PDUs based on MAXH2CDATA (Varun Prakash) - fix passthrough to namespaces with unsupported features (Christoph Hellwig) - Clear iocb->private at poll completion (Stefano) * tag 'block-5.17-2022-02-24' of git://git.kernel.dk/linux-block: nvme-tcp: send H2CData PDUs based on MAXH2CDATA nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info nvme: don't return an error from nvme_configure_metadata block: clear iocb->private in blkdev_bio_end_io_async()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - Add a conditional schedule point in io_add_buffers() (Eric) - Fix for a quiesce speedup merged in this release (Dylan) - Don't convert to jiffies for event timeout waiting, it's way too coarse when we accept a timespec as input (me) * tag 'io_uring-5.17-2022-02-23' of git://git.kernel.dk/linux-block: io_uring: disallow modification of rsrc_data during quiesce io_uring: don't convert to jiffies for waiting on timeouts io_uring: add a schedule point in io_add_buffers()
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull more x86 platform driver fixes from Hans de Goede: "Two more fixes: - Fix suspend/resume regression on AMD Cezanne APUs in >= 5.16 - Fix Microsoft Surface 3 battery readings" * tag 'platform-drivers-x86-v5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: surface: surface3_power: Fix battery readings on batteries without a serial number platform/x86: amd-pmc: Set QOS during suspend on CZN w/ timer wakeup
-
Mauri Sandberg authored
Obtaining a MAC address may be deferred in cases when the MAC is stored in an NVMEM block, for example, and it may not be ready upon the first retrieval attempt and return EPROBE_DEFER. It is also possible that a port that does not rely on NVMEM has been already created when getting the defer request. Thus, also the resources allocated previously must be freed when doing a roll-back. Fixes: 76723bca ("net: mv643xx_eth: add DT parsing support") Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220223142337.41757-1-maukka@ext.kapsi.fiSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
As Jakub noticed, prints should be avoided on the datapath. Also, as packets would never come to the else branch in ping_lookup(), remove pr_err() from ping_lookup(). Fixes: 35a79e64 ("ping: fix the dif and sdif check in ping_lookup") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.1645674068.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Mateusz Palczewski authored
Revert of a patch that instead of fixing a AQ error when trying to reset BW limit introduced several regressions related to creation and managing TC. Currently there are errors when creating a TC on both PF and VF. Error log: [17428.783095] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14 [17428.783107] i40e 0000:3b:00.1: Failed configuring TC map 0 for VSI 391 [17428.783254] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14 [17428.783259] i40e 0000:3b:00.1: Unable to configure TC map 0 for VSI 391 This reverts commit 3d250466. Fixes: 3d250466 (i40e: Fix reset bw limit when DCB enabled with 1 TC) Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220223175347.1690692-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paul Blakey authored
Ipv6 ttl, label and tos fields are modified without first pulling/pushing the ipv6 header, which would have updated the hw csum (if available). This might cause csum validation when sending the packet to the stack, as can be seen in the trace below. Fix this by updating skb->csum if available. Trace resulted by ipv6 ttl dec and then sending packet to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]: [295241.900063] s_pf0vf2: hw csum failure [295241.923191] Call Trace: [295241.925728] <IRQ> [295241.927836] dump_stack+0x5c/0x80 [295241.931240] __skb_checksum_complete+0xac/0xc0 [295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack] [295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack] [295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch] [295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch] [295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch] [295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch] [295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch] [295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch] [295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch] [295242.034074] __netif_receive_skb_core+0x2ca/0xcb0 [295242.047498] netif_receive_skb_internal+0x3e/0xc0 [295242.052291] napi_gro_receive+0xba/0xe0 [295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core] [295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core] [295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core] [295242.077958] net_rx_action+0x149/0x3b0 [295242.086762] __do_softirq+0xd7/0x2d6 [295242.090427] irq_exit+0xf7/0x100 [295242.093748] do_IRQ+0x7f/0xd0 [295242.096806] common_interrupt+0xf/0xf [295242.100559] </IRQ> [295242.102750] RIP: 0033:0x7f9022e88cbd [295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda [295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000 [295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30 [295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340 [295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000 [295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40 Fixes: 3fdbd1ce ("openvswitch: add ipv6 'set' action") Signed-off-by: Paul Blakey <paulb@nvidia.com> Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Niels Dossche authored
valid_lft, prefered_lft and tstamp are always accessed under the lock "lock" in other places. Reading these without taking the lock may result in inconsistencies regarding the calculation of the valid and preferred variables since decisions are taken on these fields for those variables. Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Niels Dossche <niels.dossche@ugent.be> Link: https://lore.kernel.org/r/20220223131954.6570-1-niels.dossche@ugent.beSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Fabio M. De Francesco authored
smc_pnetid_by_table_ib() uses read_lock() and then it calls smc_pnet_apply_ib() which, in turn, calls mutex_lock(&smc_ib_devices.mutex). read_lock() disables preemption. Therefore, the code acquires a mutex while in atomic context and it leads to a SAC bug. Fix this bug by replacing the rwlock with a mutex. Reported-and-tested-by: syzbot+4f322a6d84e991c38775@syzkaller.appspotmail.com Fixes: 64e28b52 ("net/smc: add pnet table namespace support") Confirmed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20220223100252.22562-1-fmdefrancesco@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Manish Chopra authored
Commit b7a49f73 ("bnx2x: Utilize firmware 7.13.21.0") added new firmware support in the driver with maintaining older firmware compatibility. However, older firmware was not added in MODULE_FIRMWARE() which caused missing firmware files in initrd image leading to driver load failure from initrd. This patch adds MODULE_FIRMWARE() for older firmware version to have firmware files included in initrd. Fixes: b7a49f73 ("bnx2x: Utilize firmware 7.13.21.0") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215627Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220223085720.12021-1-manishc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Marek Marczykowski-Górecki authored
This reverts commit 2afeec08. The reasoning in the commit was wrong - the code expected to setup the watch even if 'hotplug-status' didn't exist. In fact, it relied on the watch being fired the first time - to check if maybe 'hotplug-status' is already set to 'connected'. Not registering a watch for non-existing path (which is the case if hotplug script hasn't been executed yet), made the backend not waiting for the hotplug script to execute. This in turns, made the netfront think the interface is fully operational, while in fact it was not (the vif interface on xen-netback side might not be configured yet). This was a workaround for 'hotplug-status' erroneously being removed. But since that is reverted now, the workaround is not necessary either. More discussion at https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#uSigned-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Michael Brown <mbrown@fensystems.co.uk> Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingslab.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Marek Marczykowski-Górecki authored
This reverts commit 1f256578. The 'hotplug-status' node should not be removed as long as the vif device remains configured. Otherwise the xen-netback would wait for re-running the network script even if it was already called (in case of the frontent re-connecting). But also, it _should_ be removed when the vif device is destroyed (for example when unbinding the driver) - otherwise hotplug script would not configure the device whenever it re-appear. Moving removal of the 'hotplug-status' node was a workaround for nothing calling network script after xen-netback module is reloaded. But when vif interface is re-created (on xen-netback unbind/bind for example), the script should be called, regardless of who does that - currently this case is not handled by the toolstack, and requires manual script call. Keeping hotplug-status=connected to skip the call is wrong and leads to not configured interface. More discussion at https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#uSigned-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/20220222001817.2264967-1-marmarek@invisiblethingslab.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.17 - send H2CData PDUs based on MAXH2CDATA (Varun Prakash) - fix passthrough to namespaces with unsupported features (me)" * tag 'nvme-5.17-2022-02-24' of git://git.infradead.org/nvme: nvme-tcp: send H2CData PDUs based on MAXH2CDATA nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info nvme: don't return an error from nvme_configure_metadata
-
Hans de Goede authored
The battery on the 2nd hand Surface 3 which I recently bought appears to not have a serial number programmed in. This results in any I2C reads from the registers containing the serial number failing with an I2C NACK. This was causing mshw0011_bix() to fail causing the battery readings to not work at all. Ignore EREMOTEIO (I2C NACK) errors when retrieving the serial number and continue with an empty serial number to fix this. Fixes: b1f81b49 ("platform/x86: surface3_power: MSHW0011 rev-eng implementation") BugLink: https://github.com/linux-surface/linux-surface/issues/608Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220224101848.7219-1-hdegoede@redhat.com
-
Mario Limonciello authored
commit 59348401 ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup") adds support for using another platform timer in lieu of the RTC which doesn't work properly on some systems. This path was validated and worked well before submission. During the 5.16-rc1 merge window other patches were merged that caused this to stop working properly. When this feature was used with 5.16-rc1 or later some OEM laptops with the matching firmware requirements from that commit would shutdown instead of program a timer based wakeup. This was bisected to commit 8d89835b ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path"). This wasn't supposed to cause any negative impacts and also tested well on both Intel and ARM platforms. However this changed the semantics of when CPUs are allowed to be in the deepest state. For the AMD systems in question it appears this causes a firmware crash for timer based wakeup. It's hypothesized to be caused by the `amd-pmc` driver sending `OS_HINT` and all the CPUs going into a deep state while the timer is still being programmed. It's likely a firmware bug, but to avoid it don't allow setting CPUs into the deepest state while using CZN timer wakeup path. If later it's discovered that this also occurs from "regular" suspends without a timer as well or on other silicon, this may be later expanded to run in the suspend path for more scenarios. Cc: stable@vger.kernel.org # 5.16+ Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/linux-acpi/BL1PR12MB51570F5BD05980A0DCA1F3F4E23A9@BL1PR12MB5157.namprd12.prod.outlook.com/T/#mee35f39c41a04b624700ab2621c795367f19c90e Fixes: 8d89835b ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path") Fixes: 23f62d7a ("PM: sleep: Pause cpuidle later and resume it earlier during system transitions") Fixes: 59348401 ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup" Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220223175237.6209-1-mario.limonciello@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2022-02-22 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. * tag 'mlx5-fixes-2022-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix VF min/max rate parameters interchange mistake net/mlx5e: Add missing increment of count net/mlx5e: MPLSoUDP decap, fix check for unsupported matches net/mlx5e: Fix MPLSoUDP encap to use MPLS action information net/mlx5e: Add feature check for set fec counters net/mlx5e: TC, Skip redundant ct clear actions net/mlx5e: TC, Reject rules with forward and drop actions net/mlx5e: TC, Reject rules with drop and modify hdr action net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets net/mlx5e: Fix wrong return value on ioctl EEPROM query failure net/mlx5: Fix possible deadlock on rule deletion net/mlx5: Fix tc max supported prio for nic mode net/mlx5: Fix wrong limitation of metadata match on ecpf net/mlx5: Update log_max_qp value to be 17 at most net/mlx5: DR, Fix the threshold that defines when pool sync is initiated net/mlx5: DR, Don't allow match on IP w/o matching on full ethertype/ip_version net/mlx5: DR, Fix slab-out-of-bounds in mlx5_cmd_dr_create_fte net/mlx5: DR, Cache STE shadow memory net/mlx5: Update the list of the PCI supported devices ==================== Link: https://lore.kernel.org/r/20220224001123.365265-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Update some maintainers email addresses - Fix handling of elfcorehdr reservation for crash dump kernel - Fix unittest expected warnings text * tag 'devicetree-fixes-for-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: update Roger Quadros email MAINTAINERS: sifive: drop Yash Shah of/fdt: move elfcorehdr reservation early for crash dump kernel of: unittest: update text of expected warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinuxLinus Torvalds authored
Pull selinux fix from Paul Moore: "A second small SELinux fix which addresses an incorrect mutex_is_locked() check" * tag 'selinux-pr-20220223' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix misuse of mutex_is_locked()
-
Gal Pressman authored
The VF min and max rate were passed incorrectly and resulted in wrongly interchanging them. Fix the order of parameters in mlx5_esw_qos_set_vport_rate(). Fixes: d7df09f5 ("net/mlx5: E-switch, Enable vport QoS on demand") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Lama Kayal authored
Add mistakenly missing increment of count variable when looping over output buffer in mlx5e_self_test(). This resolves the issue of garbage values output when querying with self test via ethtool. before: $ ethtool -t eth2 The test result is PASS The test extra info: Link Test 0 Speed Test 1768697188 Health Test 758528120 Loopback Test 3288687 after: $ ethtool -t eth2 The test result is PASS The test extra info: Link Test 0 Speed Test 0 Health Test 0 Loopback Test 0 Fixes: 7990b1b5 ("net/mlx5e: loopback test is not supported in switchdev mode") Signed-off-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Maor Dickman authored
Currently offload of rule on bareudp device require tunnel key in order to match on mpls fields and without it the mpls fields are ignored, this is incorrect due to the fact udp tunnel doesn't have key to match on. Fix by returning error in case flow is matching on tunnel key. Fixes: 72046a91 ("net/mlx5e: Allow to match on mpls parameters") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Maor Dickman authored
Currently the MPLSoUDP encap builds the MPLS header using encap action information (tunnel id, ttl and tos) instead of the MPLS action information (label, ttl, tc and bos) which is wrong. Fix by storing the MPLS action information during the flow action parse and later using it to create the encap MPLS header. Fixes: f828ca6a ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Lama Kayal authored
Fec counters support is checked via the PCAM feature_cap_mask, bit 0: PPCNT_counter_group_Phy_statistical_counter_group. Add feature check to avoid faulty behavior. Fixes: 0a1498eb ("net/mlx5e: Expose FEC counters via ethtool") Signed-off-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Roi Dayan authored
Offload of ct clear action is just resetting the reg_c register. It's done by allocating modify hdr resources which is limited. Doing it multiple times is redundant and wasting modify hdr resources and if resources depleted the driver will fail offloading the rule. Ignore redundant ct clear actions after the first one. Fixes: 806401c2 ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Roi Dayan authored
Such rules are redundant but allowed and passed to the driver. The driver does not support offloading such rules so return an error. Fixes: 03a9d11e ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Roi Dayan authored
This kind of action is not supported by firmware and generates a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fixes: d7e75a32 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Tariq Toukan authored
For RX TLS device-offloaded packets, the HW spec guarantees checksum validation for the offloaded packets, but does not define whether the CQE.checksum field matches the original packet (ciphertext) or the decrypted one (plaintext). This latitude allows architetctural improvements between generations of chips, resulting in different decisions regarding the value type of CQE.checksum. Hence, for these packets, the device driver should not make use of this CQE field. Here we block CHECKSUM_COMPLETE usage for RX TLS device-offloaded packets, and use CHECKSUM_UNNECESSARY instead. Value of the packet's tcp_hdr.csum is not modified by the HW, and it always matches the original ciphertext. Fixes: 1182f365 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-