1. 11 Mar, 2011 5 commits
    • Paul Bolle's avatar
      ALSA: intel8x0m: add 'm' as "suffix" to static functions · a6e8509f
      Paul Bolle authored
      Adding an 'm' will distinguish them from identical names in intel8x0.c.
      Signed-off-by: default avatarPaul Bolle <pebolle@tiscali.nl>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      a6e8509f
    • Paul Bolle's avatar
      ALSA: intel8x0m: wait a bit before warm reset check · 5cd2ad81
      Paul Bolle authored
      At every resume a laptop I use prints this message (at KERN_ERR level):
          ALSA sound/pci/intel8x0m.c:904: AC'97 warm reset still in progress? [0x2]
      
      The thing to note here is that 0x2 corresponds to ICH_AC97COLD. Ie, what
      seems to be happening is that the register involved indicated a warm
      reset for some time (as the ICH_AC97WARM bit was set) but by the time
      the warning is printed, and that same register is checked again, that
      bit is already cleared and only the ICH_AC97COLD bit is still set.
      
      It turns out a warm reset needs some time to settle, but it is currently
      checked right away. The test therefore fails the first time it is done
      and schedule_timeout_uninterruptible() will be called. Once we return
      from that jiffies is already (far) past end_time on this laptop, so we
      exit the loop, print a warning, and exit the function while the warm
      reset actually succeeded.
      
      A way to fix this is to call usleep_range() after writing to the
      register involved. A handful of tests suggest 500 usecs is a safe value.
      (This might punish the "finish cold reset" case, but on this laptop such
      a cold reset apparently never happens, so I can't say for sure.)
      
      While we're at it drop the extra single tick from end_time, as it looks
      rather silly.
      Signed-off-by: default avatarPaul Bolle <pebolle@tiscali.nl>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      5cd2ad81
    • Oliver Neukum's avatar
      ALSA: usbaudio: implement USB autosuspend · 88a8516a
      Oliver Neukum authored
      Devices are autosuspended if no pcm nor midi channel is open
      Mixer devices may be opened. This way they are active when
      in use to play or record sound, but can be suspended while
      users have a mixer application running.
      
      [Small clean-ups using static inline by tiwai]
      Signed-off-by: default avatarOliver Neukum <oneukum@suse.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      88a8516a
    • Oliver Neukum's avatar
      ALSA: usbaudio: fix suspend/resume · edf7de31
      Oliver Neukum authored
      - ESHUTDOWN must be correctly handled
      - the optional interrupt endpoint's URB must be stopped and restarted
      Signed-off-by: default avatarOliver Neukum <oneukum@suse.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      edf7de31
    • Takashi Iwai's avatar
      Merge branch 'fix/misc' into topic/misc · cc99a086
      Takashi Iwai authored
      cc99a086
  2. 10 Mar, 2011 2 commits
  3. 09 Mar, 2011 1 commit
    • Takashi Iwai's avatar
      sound: Use sound_register_*() for additional OSS minor devices · 848669da
      Takashi Iwai authored
      Since OSS driver creates the device entries for /dev/audio* and
      /dev/dspW* by itself without coping with sound_core, it leads to
      conflicts with others and let sysfs spewing warnings.
      
      This patch rewrites the registration part of OSS driver to use
      the standard method also for additional minor devices.
      
      Reported-by: Steven Rostedt <rostedt@goodmis.org> (with ktest.pl)
      Tested-by: Steven Rostedt <rostedt@goodmis.org> (with ktest.pl)
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      848669da
  4. 08 Mar, 2011 4 commits
  5. 28 Feb, 2011 5 commits
    • Adrian Knoth's avatar
      ALSA: hdspm - Fix midi port initialization · 7c7102b7
      Adrian Knoth authored
      Depending on the model and the presence of a TCO module, the number of
      midi ports varies. Some have 1 port (MADIface), some have 2 (default),
      with TCO, there are 3.
      
      Don't hardcode the number of midi ports to initialize.
      
      This patch also fixes a boot lockup on MADIface.
      
      [Coding-style fixes by tiwai]
      Signed-off-by: default avatarAdrian Knoth <adi@drcomp.erfurt.thur.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      7c7102b7
    • Adrian Knoth's avatar
      ALSA: hdspm - Abort on unknown firmware revision · 5027f347
      Adrian Knoth authored
      Don't continue if we cannot detect the real card type, otherwise, all
      subsequent functions, especially strcpy(), would fail, leaving the whole
      driver in an unusable state.
      
      Without such a protection, dmesg would look like this:
      
      Pid: 1525, comm: modprobe Not tainted 2.6.38-rc6 #1 MSI MS-7250/MS-7250
      EIP: 0060:[<c114e700>] EFLAGS: 00010296 CPU: 1
      EIP is at strcpy+0x10/0x30
      EAX: f4d33e58 EBX: f5990800 ECX: f4d33e58 EDX: 00000000
      ESI: 00000000 EDI: f4d33e58 EBP: f5990930 ESP: f3dd3e0c
      DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
      f53d4204 00000000 f90bfc03 00000001 00000001 f3dd3e64 c10fedff f3dd3e7c
      f3d854e4 f53d4000 c10307b8 00000001 c10307b8 f5990860 c10307b8 00000001
      c10332e5 f59908bc c12f4339 f59908bc f5990860 c11ef207 f4d33e00 f53d4000
      [<f90bfc03>] ? snd_hdspm_probe+0x7e7/0x1166 [snd_hdspm]
      [<c10fedff>] ? __sysfs_add_one+0x1f/0xf0
      [<c10307b8>] ? get_parent_ip+0x8/0x20
      [<c10307b8>] ? get_parent_ip+0x8/0x20
      [<c10307b8>] ? get_parent_ip+0x8/0x20
      [<c10332e5>] ? add_preempt_count+0xa5/0xd0
      [<c12f4339>] ? _raw_spin_lock_irqsave+0x19/0x40
      [<c11ef207>] ? pm_runtime_enable+0x17/0x80
      [<c1160172>] ? local_pci_probe+0x42/0xb0
      [<c1161091>] ? pci_device_probe+0x61/0x80
      [<c11e9587>] ? driver_probe_device+0x77/0x180
      [<c11600f0>] ? pci_match_device+0xa0/0xc0
      [<c11e9709>] ? __driver_attach+0x79/0x80
      [<c11e9690>] ? __driver_attach+0x0/0x80
      [<c11e8e32>] ? bus_for_each_dev+0x52/0x80
      [<c11e9416>] ? driver_attach+0x16/0x20
      [<c11e9690>] ? __driver_attach+0x0/0x80
      [<c11e8771>] ? bus_add_driver+0xa1/0x220
      [<c1160f20>] ? pci_device_remove+0x0/0xf0
      [<c11e99a3>] ? driver_register+0x63/0x120
      [<c11612bd>] ? __pci_register_driver+0x3d/0xb0
      [<c1001132>] ? do_one_initcall+0x32/0x160
      [<f90d6000>] ? alsa_card_hdspm_init+0x0/0x14 [snd_hdspm]
      [<c10676a9>] ? sys_init_module+0x99/0x1e0
      [<c10ade3d>] ? sys_close+0x6d/0xc0
      [<c1002c90>] ? sysenter_do_call+0x12/0x26
      ---[ end trace 239f0661c558378b ]---
      Signed-off-by: default avatarAdrian Knoth <adi@drcomp.erfurt.thur.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      5027f347
    • Adrian Knoth's avatar
      ALSA: hdspm - Add updated firmware revision for AES32 · 526ea867
      Adrian Knoth authored
      In contrast to the PCIe version (RME AES), the PCI version (RME AES32)
      has a different firmware revision.
      
      This patch adds the missing PCI revision.
      Signed-off-by: default avatarAdrian Knoth <adi@drcomp.erfurt.thur.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      526ea867
    • Adrian Knoth's avatar
    • Risto Suominen's avatar
      ALSA: powermac - Allow input from microphone on Tumbler · 8460ae70
      Risto Suominen authored
      Allow input from microphone on remaining PowerBooks and iBooks with Tumbler.
      Tested only with PowerBook G4 Gigabit Ethernet (PowerBook3,3).
      
      [Fixed to use of_machine_is_compatible by tiwai]
      Signed-off-by: default avatarRisto Suominen <Risto.Suominen@gmail.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      8460ae70
  6. 27 Feb, 2011 1 commit
  7. 25 Feb, 2011 2 commits
  8. 23 Feb, 2011 9 commits
    • Adrian Knoth's avatar
    • Adrian Knoth's avatar
      ALSA: hdspm - prevent reading unitialized stack memory · 4ab69a2b
      Adrian Knoth authored
      Original patch by Dan Rosenberg <drosenberg@vsecurity.com> under commit
      e68d3b31. I'm copying his text here:
      
      The SNDRV_HDSPM_IOCTL_GET_CONFIG_INFO ioctl in hdspm.c allow unprivileged
      users to read uninitialized kernel stack memory, because several fields
      of the hdspm_config struct declared on the stack are not altered
      or zeroed before being copied back to the user.  This patch takes care
      of it.
      Signed-off-by: default avatarAdrian Knoth <adi@drcomp.erfurt.thur.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      4ab69a2b
    • Adrian Knoth's avatar
      ALSA: hdspm - fix sync check on AES32 · 7c4a95b5
      Adrian Knoth authored
      Fredrik Lingvall <fredrik.lingvall@gmail.com> has discovered wrong
      frequency and sync detection on AES32. According to him, the provided
      patch fixes these issues.
      Signed-off-by: default avatarAdrian Knoth <adi@drcomp.erfurt.thur.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      7c4a95b5
    • Adrian Knoth's avatar
      ALSA: hdspm - Remove input selector on MADIface · f6ea805f
      Adrian Knoth authored
      In contrast to the RME MADI card, coax/optical selection on the MADIface
      is done via a physical switch located at the breakout box. Obviously,
      the driver cannot switch ports in software.
      Signed-off-by: default avatarAdrian Knoth <adi@drcomp.erfurt.thur.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      f6ea805f
    • Adrian Knoth's avatar
      ALSA: hdspm - Fix DS/QS output channel mappings on RME MADI/MADIface · 01e96078
      Adrian Knoth authored
      Caused by two typos, no output channel mappings were assigned for
      MADI/MADIface at double/quad speed.
      
      The channel mapping is indeed identical to the single speed mapping, the
      cards will simply use the first N channels.
      Signed-off-by: default avatarFlorian Faber <faber@faberman.de>
      Signed-off-by: default avatarFredrik Lingvall <fredrik.lingvall@gmail.com>
      Signed-off-by: default avatarAdrian Knoth <adi@drcomp.erfurt.thur.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      01e96078
    • Adrian Knoth's avatar
      ALSA: hdspm - Restrict channel count on RME AES/AES32 · 88fabbfc
      Adrian Knoth authored
      Without calling an appropriate rule, AES/AES32 cards would announce a
      theoretical channel count of 64 (HDSPM_MAX_CHANNELS), leading to the
      already known bug:
      
      [37422.640481] ------------[ cut here ]------------
      [37422.640487] WARNING: at sound/pci/rme9652/hdspm.c:5449
      snd_hdspm_ioctl+0x18f/0x202 [snd_hdspm]()
      [37422.640489] Hardware name: PRIMERGY RX100 S6
      [37422.640490] BUG? (info->channel >= hdspm->max_channels_in)
      [37422.640492] Modules linked in: snd_hdspm snd_seq_midi ipmi_watchdog
      ipmi_poweroff ipmi_si ipmi_devintf ipmi_msghandler i2c_i801 e1000e
      snd_rawmidi power_meter [last unloaded: snd_hdspm]
      [37422.640501] Pid: 22231, comm: jackd Tainted: G      D W
      2.6.36-gentoo-r5 #5
      [37422.640502] Call Trace:
      [37422.640508]  [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98
      [37422.640511]  [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43
      [37422.640514]  [<ffffffff81034306>] ? get_parent_ip+0x11/0x42
      [37422.640518]  [<ffffffffa0055763>] snd_hdspm_ioctl+0x18f/0x202
      [snd_hdspm]
      [37422.640522]  [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c
      [37422.640525]  [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01
      [37422.640527]  [<ffffffff81034306>] ? get_parent_ip+0x11/0x42
      [37422.640531]  [<ffffffff8105be6c>] ? __srcu_read_unlock+0x3b/0x59
      [37422.640533]  [<ffffffff81400bce>] snd_pcm_capture_ioctl1+0x20a/0x227
      [37422.640537]  [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e
      [37422.640540]  [<ffffffff81400c15>] snd_pcm_capture_ioctl+0x2a/0x2e
      [37422.640543]  [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453
      [37422.640546]  [<ffffffff810f2d09>] sys_ioctl+0x51/0x74
      [37422.640549]  [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b
      [37422.640552] ---[ end trace 0cd919cd68118082 ]---
      
      We already have all the right values in place, we simply have to inform
      the upper layers about this restriction.
      
      Note that snd_hdspm_hw_rule_rate_out_channels and
      snd_hdspm_hw_rule_rate_in_channels must not be called on AES32, because
      the channel count is always 16, no matter of the samplerate in use.
      Signed-off-by: default avatarAdrian Knoth <adi@drcomp.erfurt.thur.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      88fabbfc
    • Adrian Knoth's avatar
      ALSA: hdspm - Fix buffer handling on RME MADI/MADIface/AES(32) · 483cee77
      Adrian Knoth authored
      Only RayDAT and AIO provide sane buffer pointers that can be used with
      HDSPM_BufferPositionMask, on all other cards, this would result in a
      wrong HW pointer leading to xruns and these messages:
      
      [260808.916788] BUG: pcmC0D0p:0, pos = 2976, buffer size = 1024, period size = 512
      [260808.961124] BUG: pcmC0D0c:0, pos = 4944, buffer size = 1024, period size = 512
      Signed-off-by: default avatarAdrian Knoth <adi@drcomp.erfurt.thur.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      483cee77
    • Adrian Knoth's avatar
      ALSA: hpdsm - RME AES(32): Fix missing channel mappings · 432d2500
      Adrian Knoth authored
      On RME AES and AES(32), none of the required information
      (max_channels_in, max_channels_out, channel mappings, port names) was
      set, leading to the BUG below.
      
      This patch adds the missing bits, thus fixing the bug.
      
      125.058768] ------------[ cut here ]------------
      [  125.058773] WARNING: at sound/pci/rme9652/hdspm.c:5389
      snd_hdspm_ioctl+0x10c/0x1d8 [snd_hdspm]()
      [  125.058775] Hardware name: PRIMERGY RX100 S6
      [  125.058777] BUG? (info->channel >= hdspm->max_channels_out)
      [  125.058778] Modules linked in: ipmi_watchdog ipmi_poweroff ipmi_si
      ipmi_devintf ipmi_msghandler snd_hdspm power_meter e1000e snd_rawmidi
      i2c_i801
      [  125.058787] Pid: 3652, comm: audacity Tainted: G        W
      2.6.36-gentoo-r5 #5
      [  125.058788] Call Trace:
      [  125.058792]  [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98
      [  125.058796]  [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43
      [  125.058800]  [<ffffffffa006761a>] snd_hdspm_ioctl+0x10c/0x1d8
      [snd_hdspm]
      [  125.058803]  [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c
      [  125.058806]  [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01
      [  125.058809]  [<ffffffff810c604c>] ? __do_fault+0x361/0x3a6
      [  125.058812]  [<ffffffff81400e23>] snd_pcm_playback_ioctl1+0x20a/0x227
      [  125.058815]  [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e
      [  125.058818]  [<ffffffff81400e6a>] snd_pcm_playback_ioctl+0x2a/0x2e
      [  125.058821]  [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453
      [  125.058824]  [<ffffffff810f2d09>] sys_ioctl+0x51/0x74
      [  125.058827]  [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b
      [  125.058830] ---[ end trace 5bddb08e5d4cbeb1 ]---
      Signed-off-by: default avatarAdrian Knoth <adi@drcomp.erfurt.thur.de>
      Signed-off-by: default avatarFlorian Faber <faber@faberman.de>
      Signed-off-by: default avatarFredrik Lingvall <fredrik.lingvall@gmail.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      432d2500
    • Takashi Iwai's avatar
      ALSA: usb-audio: fix oops due to cleanup race when disconnecting · 382225e6
      Takashi Iwai authored
      When a USB audio device is disconnected, snd_usb_audio_disconnect()
      kills all audio URBs.  At the same time, the application, after being
      notified of the disconnection, might close the device, in which case
      ALSA calls the .hw_free callback, which should free the URBs too.
      
      Commit de1b8b93 "[ALSA] Fix hang-up at disconnection of usb-audio"
      prevented snd_usb_hw_free() from freeing the URBs to avoid a hang that
      resulted from this race, but this introduced another race because the
      URB callbacks could now be executed after snd_usb_hw_free() has
      returned, and try to access already freed data.
      
      Fix the first race by introducing a mutex to serialize the disconnect
      callback and all PCM callbacks that manage URBs (hw_free and hw_params).
      Reported-and-tested-by: default avatarPierre-Louis Bossart <pierre-louis.bossart@intel.com>
      Cc: <stable@kernel.org>
      [CL: also serialize hw_params callback]
      Signed-off-by: default avatarClemens Ladisch <clemens@ladisch.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      382225e6
  9. 22 Feb, 2011 1 commit
  10. 21 Feb, 2011 1 commit
  11. 20 Feb, 2011 1 commit
  12. 19 Feb, 2011 4 commits
  13. 17 Feb, 2011 1 commit
  14. 14 Feb, 2011 3 commits