Suggested-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers should reserve some headroom in skb used in receive path,
to avoid future head reallocation.

One possible way to do that is to use dev_alloc_skb() instead
of alloc_skb(), so that NET_SKB_PAD bytes are reserved.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously, if you did an "ifconfig down" or similar on one core, and
the kernel had CONFIG_XFRM enabled, every core would be interrupted to
check its percpu flow list for items that could be garbage collected.

With this change, we generate a mask of cores that actually have any
percpu items, and only interrupt those cores.  When we are trying to
isolate a set of cpus from interrupts, this is important to do.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revised bnx2x implementation of PCI Express Advanced Error Recovery -
stop and free driver resources according to the AER flow (instead of the
currently implemented `hope-for-the-best' release approach), and do not make
any assumptions on the HW state after slot reset.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fec_poll_controller() was not declared. It should be static.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

emac_poll_controller() was not declared. It should be static.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

module_platform_driver macro removes some boilerplate and
simplifies the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

module_platform_driver macro removes some boilerplate and
simplifies the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

module_platform_driver macro removes some boilerplate and
simplifies the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

module_platform_driver macro removes some boilerplate and
simplifies the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

module_platform_driver macro removes some boilerplate and
simplifies the code.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Process connector can now also detect coredumping events.

Main aim of patch is get notified at start of coredumping, instead of
having to wait for it to finish and then being notified through EXIT
event.

Could be used for instance by process-managers that want to get
notified as soon as possible about process failures, and not
necessarily beeing notified after coredump, which could be in the
order of minutes depending on size of coredump, piping and so on.
Signed-off-by: Jesper Derehag <jderehag@hotmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only place where gfar_configure_coalescing is called
with an actual bitmask (other than 0xff) is in gfar_poll
(on the hot path). So make gfar_configure_coalescing()
static for the buffer processing path, and export
gfar_configure_coalescing_all() for the remaining cases
that require to set coalescing for all the queues at once
(on the slow path).
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For Multi Q Multi Group (MQ_MG_MODE) mode, the Rx/Tx colescing registers [rt]xic
are aliased with the [rt]xic0 registers (coalescing setting regs for Q0). This
avoids programming twice in a row the coalescing registers for the Rx/Tx hw Q0.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Split the napi budget fairly among the active queues only, instead
of dividing it by the total number of Rx queues assigned to the
given interrupt group.
Use the h/w indication field RXFi in rstat (receive status register)
to identify the active rx queues from the current interrupt group
(i.e. receive event occured on ring i, if ring i is part of the current
interrupt group). This indication field in rstat, RXFi i=0..7,
allows us to find out on which queues of the same interrupt group
do we have incomming traffic once we entered the polling routine for
the given interrupt group. After servicing the ring i, the corresponding
bit RXFi will be written with 1 to clear the active queue indication for
that ring.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are 2 issues with the current napi poll routine, with regards
to tx ring cleanup:
1) for multi-queue devices (MQ_MG_MODE), should tx_bit_map != rx_bit_map,
which is possible (and supported in h/w) if the DT property "fsl,tx-bit-map"
holds a different value than rx_bit_map, the current polling routine will
service the wrong Tx queues in this case (i.e. the interrupt group will
receive interrupts from tx queues that it will not service)
2) Tx cleanup completion consumes napi budget, whereas the napi budget
should be reserved for Rx work only.

The patch fixes these issues and provides a clean napi polling routine.
Napi poll completion is reached when all the Rx queues have been
serviced and there is no Tx work to do.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is very useful to do dynamic truncation of packets. In particular,
we're interested to push the necessary header bytes to the user space and
cut off user payload that should probably not be transferred for some reasons
(e.g. privacy, speed, or others). With the ancillary extension PAY_OFFSET,
we can load it into the accumulator, and return it. E.g. in bpfc syntax ...

        ld #poff        ; { 0x20, 0, 0, 0xfffff034 },
        ret a           ; { 0x16, 0, 0, 0x00000000 },

... as a filter will accomplish this without having to do a big hackery in
a BPF filter itself. Follow-up JIT implementations are welcome.

Thanks to Eric Dumazet for suggesting and discussing this during the
Netfilter Workshop in Copenhagen.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__skb_get_poff() returns the offset to the payload as far as it could
be dissected. The main user is currently BPF, so that we can dynamically
truncate packets without needing to push actual payload to the user
space and instead can analyze headers only.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull in the 'net' tree to get Daniel Borkmann's flow dissector
infrastructure change.
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix flaky results with PACKET_FANOUT_HASH depending on whether the
two flows hash into the same packet socket or not.

Also adds tests for PACKET_FANOUT_LB and PACKET_FANOUT_CPU and
replaces the counting method with a packet ring.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following warnings that happen when building with W=1 option:

drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_free_buffers':
drivers/net/ethernet/freescale/fec.c:1337:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_alloc_buffers':
drivers/net/ethernet/freescale/fec.c:1361:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_init':
drivers/net/ethernet/freescale/fec.c:1631:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This makes sure that release_sock is called for all error conditions in
irda_getsockopt.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Brad Spengler <spender@grsecurity.net>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

One must check the result of ioremap() -- in this case it prevents potential
kernel oops when initializing TSU registers further on...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sh_mdio_init() allocates pointer to 'struct bb_info' but only stores it locally,
so that sh_mdio_release() can't free it on driver unload.  Add the pointer to
'struct bb_info' to 'struct sh_eth_private', so that sh_mdio_init() can save
'bitbang' variable for sh_mdio_release() to be able to free it later...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using ipconfig the logs currently look like:

Single name server:
[    3.467270] IP-Config: Complete:
[    3.470613]      device=eth0, hwaddr=ac:de:48:00:00:01, ipaddr=172.16.42.2, mask=255.255.255.0, gw=172.16.42.1
[    3.480670]      host=infigo-1, domain=, nis-domain=(none)
[    3.486166]      bootserver=172.16.42.1, rootserver=172.16.42.1, rootpath=
[    3.492910]      nameserver0=172.16.42.1[    3.496853] ALSA device list:

Three name servers:
[    3.496949] IP-Config: Complete:
[    3.500293]      device=eth0, hwaddr=ac:de:48:00:00:01, ipaddr=172.16.42.2, mask=255.255.255.0, gw=172.16.42.1
[    3.510367]      host=infigo-1, domain=, nis-domain=(none)
[    3.515864]      bootserver=172.16.42.1, rootserver=172.16.42.1, rootpath=
[    3.522635]      nameserver0=172.16.42.1, nameserver1=172.16.42.100
[    3.529149] , nameserver2=172.16.42.200

Fix newline handling for these cases
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In skb_flow_dissect(), we perform a dissection of a skbuff. Since we're
doing the work here anyway, also store thoff for a later usage, e.g. in
the BPF filter.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tom Parkin says:

====================
This l2tp bugfix patchset addresses a number of issues.

The first five patches in the series prevent l2tp sessions pinning an l2tp
tunnel open.  This occurs because the l2tp tunnel is torn down in the tunnel
socket destructor, but each session holds a tunnel socket reference which
prevents tunnels with sessions being deleted.  The solution I've implemented
here involves adding a .destroy hook to udp code, as discussed previously on
netdev[1].

The subsequent seven patches address futher bugs exposed by fixing the problem
above, or exposed through stress testing the implementation above.  Patch 11
(avoid deadlock in l2tp stats update) isn't directly related to tunnel/session
lifetimes, but it does prevent deadlocks on i386 kernels running on 64 bit
hardware.

This patchset has been tested on 32 and 64 bit preempt/non-preempt kernels,
using iproute2, openl2tp, and custom-made stress test code.

[1] http://comments.gmane.org/gmane.linux.network/259169
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If we postpone unhashing of l2tp sessions until the structure is freed, we
risk:

 1. further packets arriving and getting queued while the pseudowire is being
    closed down
 2. the recv path hitting "scheduling while atomic" errors in the case that
    recv drops the last reference to a session and calls l2tp_session_free
    while in atomic context

As such, l2tp sessions should be unhashed from l2tp_core data structures early
in the teardown process prior to calling pseudowire close.  For pseudowires
like l2tp_ppp which have multiple shutdown codepaths, provide an unhash hook.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp's u64_stats writers were incorrectly synchronised, making it possible to
deadlock a 64bit machine running a 32bit kernel simply by sending the l2tp
code netlink commands while passing data through l2tp sessions.

Previous discussion on netdev determined that alternative solutions such as
spinlock writer synchronisation or per-cpu data would bring unjustified
overhead, given that most users interested in high volume traffic will likely
be running 64bit kernels on 64bit hardware.

As such, this patch replaces l2tp's use of u64_stats with atomic_long_t,
thereby avoiding the deadlock.

Ref:
http://marc.info/?l=linux-netdev&m=134029167910731&w=2
http://marc.info/?l=linux-netdev&m=134079868111131&w=2Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If userspace deletes a ppp pseudowire using the netlink API, either by
directly deleting the session or by deleting the tunnel that contains the
session, we need to tear down the corresponding pppox channel.

Rather than trying to manage two pppox unbind codepaths, switch the netlink
and l2tp_core session_close handlers to close via. the l2tp_ppp socket
.release handler.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add calls to l2tp_session_queue_purge as a part of l2tp_tunnel_closeall
and l2tp_session_delete.  Pseudowire implementations which are deleted only
via. l2tp_core l2tp_session_delete calls can dispense with their own code for
flushing the reorder queue.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an l2tp session is deleted, it is necessary to delete skbs in-flight
on the session's reorder queue before taking it down.

Rather than having each pseudowire implementation reaching into the
l2tp_session struct to handle this itself, provide a function in l2tp_core to
purge the session queue.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is valid for an existing struct sock object to have a NULL sk_socket
pointer, so don't BUG_ON in l2tp_tunnel_del_work if that should occur.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When looking up the tunnel socket in struct l2tp_tunnel, hold a reference
whether the socket was created by the kernel or by userspace.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a user deletes a tunnel using netlink, all the sessions in the tunnel
should also be deleted.  Since running sessions will pin the tunnel socket
with the references they hold, have the l2tp_tunnel_delete close all sessions
in a tunnel before finally closing the tunnel socket.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_core hooks UDP's .destroy handler to gain advance warning of a tunnel
socket being closed from userspace.  We need to do the same thing for
IP-encapsulation sockets.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_core internally uses l2tp_tunnel_closeall to close all sessions in a
tunnel when a UDP-encapsulation socket is destroyed.  We need to do something
similar for IP-encapsulation sockets.

Export l2tp_tunnel_closeall as a GPL symbol to enable l2tp_ip and l2tp_ip6 to
call it from their .destroy handlers.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

L2TP sessions hold a reference to the tunnel socket to prevent it going away
while sessions are still active.  However, since tunnel destruction is handled
by the sock sk_destruct callback there is a catch-22: a tunnel with sessions
cannot be deleted since each session holds a reference to the tunnel socket.
If userspace closes a managed tunnel socket, or dies, the tunnel will persist
and it will be neccessary to individually delete the sessions using netlink
commands.  This is ugly.

To prevent this occuring, this patch leverages the udp encapsulation socket
destroy callback to gain early notification when the tunnel socket is closed.
This allows us to safely close the sessions running in the tunnel, dropping
the tunnel socket references in the process.  The tunnel socket is then
destroyed as normal, and the tunnel resources deallocated in sk_destruct.

While we're at it, ensure that l2tp_tunnel_closeall correctly drops session
references to allow the sessions to be deleted rather than leaking.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>