This PL008 among all other variables named PL080 doesn't seem
right. Fix it. Also add some missing defined that I use in the
new PL08x driver.
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

This patch fixes on following build warning.

warning: (PLAT_S5P && (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 ||
	     ARCH_S5PV210 || ARCH_S5PV310) || ARCH_S3C64XX && <choice>)
	     selects PLAT_SAMSUNG which has unmet direct dependencies
	     (ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX)
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

For situations where double buffering is needed (such as the
current Android) make the screen virtual y size twice the
LCD size so that there is space for a second screen that
can be switched to.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Change the area available for consitent DMA allocations from the
default to 8MiB to allow drivers such as the framebuffer to get
more memory (for situations where larger virtual screen resolutions
are needed).
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

This adds the I²C board information for the WM8987 used in the SmartQ as audio
codec and adds the I²C/I²S platform drivers.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

The following change makes the framebuffer work on SmartQ5. There are
still some problems with ADC, so this patch alone won't make the device
run (or even give a working fb), but it's one issue less to think about.
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

This patch changes the platform data definitions of the wifi and iNAND chip on
the SmartQ 5 and 7 to indicate that they don't have a CD line available and are
thus hard-wired to the SDHCI data lines.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

This shares the common LCD control platform definition used in the SmartQ 5 and
7. This also corrects it as a GPIO bitbanged SPI device instead of an I²C one,
which was wrong.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Register SHDCI devices
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
[ben-linux@fluff.org: rewrite header[
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

This patch is based on "[PATCH v2] Support for Real6410"
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Add support for CoreWind Real6410 board, based on Samsung s3c6410 processor.
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: check kmalloc() result
  arch/tile: catch up on various minor cleanups.
  arch/tile: avoid erroneous error return for PTRACE_POKEUSR.
  tile: set ARCH_KMALLOC_MINALIGN
  tile: remove homegrown L1_CACHE_ALIGN macro
  arch/tile: Miscellaneous cleanup changes.
  arch/tile: Split the icache flush code off to a generic <arch> header.
  arch/tile: Fix bug in support for atomic64_xx() ops.
  arch/tile: Shrink the tile-opcode files considerably.
  arch/tile: Add driver to enable access to the user dynamic network.
  arch/tile: Enable more sophisticated IRQ model for 32-bit chips.
  Move list types from <linux/list.h> to <linux/types.h>.
  Add wait4() back to the set of <asm-generic/unistd.h> syscalls.
  Revert adding some arch-specific signal syscalls to <linux/syscalls.h>.
  arch/tile: Do not use GFP_KERNEL for dma_alloc_coherent(). Feedback from fujita.tomonori@lab.ntt.co.jp.
  arch/tile: core support for Tilera 32-bit chips.
  Fix up the "generic" unistd.h ABI to be more useful.

* 'for-linus' of git://www.jni.nu/cris: (51 commits)
  CRIS: Fix alignment problem for older ld
  CRIS: Always dump registers for segfaulting process.
  CRIS: Add config for pausing a seg-faulting process
  CRIS: Don't take faults while in_atomic
  CRIS: Fixup lookup for delay slot faults
  CRIS: Discard exit.text and .data at runtime
  CRIS: Add cache aligned and read mostly data sections
  CRIS: Return something from profile write
  CRIS: Add ARTPEC-3 and timestamps for sync-serial
  CRIS: Better ARTPEC-3 support for gpio
  CRIS: Add include guard
  CRIS: Better handling of pinmux settings
  CRIS: New DMA defines for ARTPEC-3
  CRIS: __do_strncpy_from_user: Don't read the byte beyond the nil
  CRIS: Pagetable for ARTPEC-3
  CRIS: Machine dependent memmap.h
  CRIS: Check if pointer is set before using it
  CRIS: Machine dependent dma.h
  CRIS: Define __read_mostly for CRISv32
  CRIS: Discard .note.gnu.build-id section
  ...

* 'for-linus' of git://android.kernel.org/kernel/tegra:
  [ARM] tegra: add MAINTAINERS entry
  [ARM] tegra: harmony: Add harmony board file
  [ARM] tegra: add pinmux support
  [ARM] tegra: add GPIO support
  [ARM] tegra: Add timer support
  [ARM] tegra: SMP support
  [ARM] tegra: Add clock support
  [ARM] tegra: Add IRQ support
  [ARM] tegra: initial tegra support

* 'for-linus' of git://github.com/schandinat/linux-2.6:
  drivers/video/via/via-gpio.c: fix warning
  viafb: Depends on X86
  fbdev: section cleanup in viafb driver
  viafb: fix accel_flags check_var bug
  viafb: probe cleanups
  viafb: remove ioctls which break the framebuffer interface
  viafb: update fix before calculating depth
  viafb: PLL value cleanup
  viafb: simplify lcd size "detection"
  viafb: fix PCI table
  viafb: add lcd scaling support for some IGPs
  viafb: improve lcd code readability
  viafb: remove duplicated scaling code
  MAINTAINERS: update viafb entry

* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (64 commits)
  OMAP: DSS2: OMAPFB: add support for FBIO_WAITFORVSYNC
  OMAP: DSS2: Replace strncmp() with sysfs_streq() in overlay_manager_store()
  OMAP: DSS2: Fix error path in omap_dsi_update()
  OMAP: DSS2: TDO35S: fix video signaling
  OMAP: DSS2: OMAPFB: Fix invalid bpp for PAL and NTSC modes
  OMAP: DSS2: OMAPFB: Fix probe error path
  OMAP3EVM: Replace vdvi regulator supply with vdds_dsi
  OMAP: DSS2: Remove extra return statement
  OMAP: DSS2: adjust YUV overlay width to be even
  OMAP: DSS2: OMAPFB: Fix sysfs mirror input check
  OMAP: DSS2: OMAPFB: Remove redundant color register range check
  OMAP: DSS2: OMAPFB: Remove redundant rotate range check
  OMAP: DSS2: OMAPFB: Check fb2display() return value
  OMAP: DSS2: Taal: Optimize enable_te, rotate, mirror when value unchanged
  OMAP: DSS2: DSI: detect unsupported update requests
  OMAP: DSS2: DSI: increase FIFO low threshold
  OMAP: DSS2: DSI: Add error IRQ mask for DSI complexIO
  OMAP: DSS2: DSI: Remove BTA after set_max_rx_packet_size
  OMAP: DSS2: change manual update scaling setup
  OMAP: DSS2: DSI: use BTA to end the frame transfer
  ...

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (143 commits)
  omap: mailbox: reorganize headers
  omap: mailbox: standarize on 'omap-mailbox'
  omap: mailbox: only compile for configured archs
  omap: mailbox: simplify omap_mbox_register()
  omap: mailbox: reorganize registering
  omap: mailbox: add IRQ names
  omap: mailbox: remove unecessary fields
  omap: mailbox: don't export unecessary symbols
  omap: mailbox: update omap1 probing
  omap: mailbox: use correct config for omap1
  omap: mailbox: 2420 should be detected at run-time
  omap: mailbox: reorganize structures
  omap: mailbox: trivial cleanups
  omap mailbox: Set a device in logical mbox instance for traceability
  omap: mailbox: convert block api to kfifo
  omap: mailbox: remove (un)likely macros from cold paths
  omap: mailbox cleanup: split MODULE_AUTHOR line
  omap: mailbox: convert rwlocks to spinlock
  Mailbox: disable mailbox interrupt when request queue
  Mailbox: new mutext lock for h/w mailbox configuration
  ...

Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci

* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci:
  davinci: dm646x EVM: Specify reserved EDMA channel/slots
  davinci: da8xx/omapl EVM: Specify reserved channels/slots
  davinci: support for EDMA resource sharing
  davinci: edma: provide ability to detect insufficient CC info data
  davinci: da8xx: sparse cleanup: remove duplicate entries in irq priorities
  davinci: DM365: fixed second serial port
  Davinci: tnetv107x evm board initial support
  Davinci: tnetv107x initial gpio support
  Davinci: tnetv107x soc support
  Davinci: tnetv107x decompresser uart definitions
  Davinci: generalized debug macros

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (82 commits)
  firewire: core: add forgotten dummy driver methods, remove unused ones
  firewire: add isochronous multichannel reception
  firewire: core: small clarifications in core-cdev
  firewire: core: remove unused code
  firewire: ohci: release channel in error path
  firewire: ohci: use memory barriers to order descriptor updates
  tools/firewire: nosy-dump: increment program version
  tools/firewire: nosy-dump: remove unused code
  tools/firewire: nosy-dump: use linux/firewire-constants.h
  tools/firewire: nosy-dump: break up a deeply nested function
  tools/firewire: nosy-dump: make some symbols static or const
  tools/firewire: nosy-dump: change to kernel coding style
  tools/firewire: nosy-dump: work around segfault in decode_fcp
  tools/firewire: nosy-dump: fix it on x86-64
  tools/firewire: add userspace front-end of nosy
  firewire: nosy: note ioctls in ioctl-number.txt
  firewire: nosy: use generic printk macros
  firewire: nosy: endianess fixes and annotations
  firewire: nosy: annotate __user pointers and __iomem pointers
  firewire: nosy: fix device shutdown with active client
  ...

* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits)
  ACPI / ACPICA: Simplify acpi_ev_initialize_gpe_block()
  ACPI / ACPICA: Fail acpi_gpe_wakeup() if ACPI_GPE_CAN_WAKE is unset
  ACPI / ACPICA: Do not execute _PRW methods during initialization
  ACPI: Fix bogus GPE test in acpi_bus_set_run_wake_flags()
  ACPICA: Update version to 20100702
  ACPICA: Fix for Alias references within Package objects
  ACPICA: Fix lint warning for 64-bit constant
  ACPICA: Remove obsolete GPE function
  ACPICA: Update debug output components
  ACPICA: Add support for WDDT - Watchdog Descriptor Table
  ACPICA: Drop acpi_set_gpe
  ACPICA: Use low-level GPE enable during GPE block initialization
  ACPI / EC: Do not use acpi_set_gpe
  ACPI / EC: Drop suspend and resume routines
  ACPICA: Remove wakeup GPE reference counting which is not used
  ACPICA: Introduce acpi_gpe_wakeup()
  ACPICA: Rename acpi_hw_gpe_register_bit
  ACPICA: Update version to 20100528
  ACPICA: Add signatures for undefined tables: ATKG, GSCI, IEIT
  ACPICA: Optimization: Reduce the number of namespace walks
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits)
  IB/qib: Add missing <linux/slab.h> include
  IB/ehca: Drop unnecessary NULL test
  RDMA/nes: Fix confusing if statement indentation
  IB/ehca: Init irq tasklet before irq can happen
  RDMA/nes: Fix misindented code
  RDMA/nes: Fix showing wqm_quanta
  RDMA/nes: Get rid of "set but not used" variables
  RDMA/nes: Read firmware version from correct place
  IB/srp: Export req_lim via sysfs
  IB/srp: Make receive buffer handling more robust
  IB/srp: Use print_hex_dump()
  IB: Rename RAW_ETY to RAW_ETHERTYPE
  RDMA/nes: Fix two sparse warnings
  RDMA/cxgb3: Make needlessly global iwch_l2t_send() static
  IB/iser: Make needlessly global iser_alloc_rx_descriptors() static
  RDMA/cxgb4: Add timeouts when waiting for FW responses
  IB/qib: Fix race between qib_error_qp() and receive packet processing
  IB/qib: Limit the number of packets processed per interrupt
  IB/qib: Allow writes to the diag_counters to be able to clear them
  IB/qib: Set cfgctxts to number of CPUs by default
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (214 commits)
  ALSA: hda - Add pin-fix for HP dc5750
  ALSA: als4000: Fix potentially invalid DMA mode setup
  ALSA: als4000: enable burst mode
  ALSA: hda - Fix initial capsrc selection in patch_alc269()
  ASoC: TWL4030: Capture route runtime DAPM ordering fix
  ALSA: hda - Add PC-beep whitelist for an Intel board
  ALSA: hda - More relax for pending period handling
  ALSA: hda - Define AC_FMT_* constants
  ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs
  ALSA: hda - Add support for HDMI HBR passthrough
  ALSA: hda - Set Stream Type in Stream Format according to AES0
  ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposed
  ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF
  ASoC: wm9081: fix resource reclaim in wm9081_register error path
  ASoC: wm8978: fix a memory leak if a wm8978_register fail
  ASoC: wm8974: fix a memory leak if another WM8974 is registered
  ASoC: wm8961: fix resource reclaim in wm8961_register error path
  ASoC: wm8955: fix resource reclaim in wm8955_register error path
  ASoC: wm8940: fix a memory leak if wm8940_register return error
  ASoC: wm8904: fix resource reclaim in wm8904_register error path
  ...

* 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  do_coredump: Do not take BKL
  init: Remove the BKL from startup code

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  SELINUX: Fix build error.

* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux: (34 commits)
  nfsd4: fix file open accounting for RDWR opens
  nfsd: don't allow setting maxblksize after svc created
  nfsd: initialize nfsd versions before creating svc
  net: sunrpc: removed duplicated #include
  nfsd41: Fix a crash when a callback is retried
  nfsd: fix startup/shutdown order bug
  nfsd: minor nfsd read api cleanup
  gcc-4.6: nfsd: fix initialized but not read warnings
  nfsd4: share file descriptors between stateid's
  nfsd4: fix openmode checking on IO using lock stateid
  nfsd4: miscellaneous process_open2 cleanup
  nfsd4: don't pretend to support write delegations
  nfsd: bypass readahead cache when have struct file
  nfsd: minor nfsd_svc() cleanup
  nfsd: move more into nfsd_startup()
  nfsd: just keep single lockd reference for nfsd
  nfsd: clean up nfsd_create_serv error handling
  nfsd: fix error handling in __write_ports_addxprt
  nfsd: fix error handling when starting nfsd with rpcbind down
  nfsd4: fix v4 state shutdown error paths
  ...

Fix the module init error handling.  There are a bunch of goto labels for
aborting the init procedure at different points and just undoing what needs
undoing - they aren't all in the right places, however.

This can lead to an oops like the following:

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
	IP: [<ffffffff81042a31>] destroy_workqueue+0x17/0xc0
	...
	Modules linked in: kafs(+) dns_resolver rxkad af_rxrpc fscache

	Pid: 2171, comm: insmod Not tainted 2.6.35-cachefs+ #319 DG965RY/
	...
	Process insmod (pid: 2171, threadinfo ffff88003ca6a000, task ffff88003dcc3050)
	...
	Call Trace:
	 [<ffffffffa0055994>] afs_callback_update_kill+0x10/0x12 [kafs]
	 [<ffffffffa007d1c5>] afs_init+0x190/0x1ce [kafs]
	 [<ffffffffa007d035>] ? afs_init+0x0/0x1ce [kafs]
	 [<ffffffff810001ef>] do_one_initcall+0x59/0x14e
	 [<ffffffff8105f7ee>] sys_init_module+0x9c/0x1de
	 [<ffffffff81001eab>] system_call_fastpath+0x16/0x1b
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'nfs-for-2.6.36' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (42 commits)
  NFS: NFSv4.1 is no longer a "developer only" feature
  NFS: NFS_V4 is no longer an EXPERIMENTAL feature
  NFS: Fix /proc/mount for legacy binary interface
  NFS: Fix the locking in nfs4_callback_getattr
  SUNRPC: Defer deleting the security context until gss_do_free_ctx()
  SUNRPC: prevent task_cleanup running on freed xprt
  SUNRPC: Reduce asynchronous RPC task stack usage
  SUNRPC: Move the bound cred to struct rpc_rqst
  SUNRPC: Clean up of rpc_bindcred()
  SUNRPC: Move remaining RPC client related task initialisation into clnt.c
  SUNRPC: Ensure that rpc_exit() always wakes up a sleeping task
  SUNRPC: Make the credential cache hashtable size configurable
  SUNRPC: Store the hashtable size in struct rpc_cred_cache
  NFS: Ensure the AUTH_UNIX credcache is allocated dynamically
  NFS: Fix the NFS users of rpc_restart_call()
  SUNRPC: The function rpc_restart_call() should return success/failure
  NFSv4: Get rid of the bogus RPC_ASSASSINATED(task) checks
  NFSv4: Clean up the process of renewing the NFSv4 lease
  NFSv4.1: Handle NFS4ERR_DELAY on SEQUENCE correctly
  NFS: nfs_rename() should not have to flush out writebacks
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add retrieve request
  fuse: add store request
  fuse: don't use atomic kmap

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (45 commits)
  nilfs2: reject filesystem with unsupported block size
  nilfs2: avoid rec_len overflow with 64KB block size
  nilfs2: simplify nilfs_get_page function
  nilfs2: reject incompatible filesystem
  nilfs2: add feature set fields to super block
  nilfs2: clarify byte offset in super block format
  nilfs2: apply read-ahead for nilfs_btree_lookup_contig
  nilfs2: introduce check flag to btree node buffer
  nilfs2: add btree get block function with readahead option
  nilfs2: add read ahead mode to nilfs_btnode_submit_block
  nilfs2: fix buffer head leak in nilfs_btnode_submit_block
  nilfs2: eliminate inline keywords in btree implementation
  nilfs2: get maximum number of child nodes from bmap object
  nilfs2: reduce repetitive calculation of max number of child nodes
  nilfs2: optimize calculation of min/max number of btree node children
  nilfs2: remove redundant pointer checks in bmap lookup functions
  nilfs2: get rid of nilfs_bmap_union
  nilfs2: unify bmap set_target_v operations
  nilfs2: get rid of nilfs_btree uses
  nilfs2: get rid of nilfs_direct uses
  ...

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
  ext4: Adding error check after calling ext4_mb_regular_allocator()
  ext4: Fix dirtying of journalled buffers in data=journal mode
  ext4: re-inline ext4_rec_len_(to|from)_disk functions
  jbd2: Remove t_handle_lock from start_this_handle()
  jbd2: Change j_state_lock to be a rwlock_t
  jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stop
  ext4: Add mount options in superblock
  ext4: force block allocation on quota_off
  ext4: fix freeze deadlock under IO
  ext4: drop inode from orphan list if ext4_delete_inode() fails
  ext4: check to make make sure bd_dev is set before dereferencing it
  jbd2: Make barrier messages less scary
  ext4: don't print scary messages for allocation failures post-abort
  ext4: fix EFBIG edge case when writing to large non-extent file
  ext4: fix ext4_get_blocks references
  ext4: Always journal quota file modifications
  ext4: Fix potential memory leak in ext4_fill_super
  ext4: Don't error out the fs if the user tries to make a file too big
  ext4: allocate stripe-multiple IOs on stripe boundaries
  ext4: move aio completion after unwritten extent conversion
  ...

Fix up conflicts in fs/ext4/inode.c as per Ted.

Fix up xfs conflicts as per earlier xfs merge.

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  ext3: Fix dirtying of journalled buffers in data=journal mode
  ext3: default to ordered mode
  quota: Use mark_inode_dirty_sync instead of mark_inode_dirty
  quota: Change quota error message to print out disk and function name
  MAINTAINERS: Update entries of ext2 and ext3
  MAINTAINERS: Update address of Andreas Dilger
  ext3: Avoid filesystem corruption after a crash under heavy delete load
  ext3: remove vestiges of nobh support
  ext3: Fix set but unused variables
  quota: clean up quota active checks
  quota: Clean up the namespace in dqblk_xfs.h
  quota: check quota reservation on remove_dquot_ref

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  fs/dlm: Drop unnecessary null test
  dlm: use genl_register_family_with_ops()

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: super.c Fix warning: variable 'sbi' set but not used
  udf: remove duplicated #include

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [DNS RESOLVER] Minor typo correction
  DNS: Fixes for the DNS query module
  cifs: Include linux/err.h for IS_ERR and PTR_ERR
  DNS: Make AFS go to the DNS for AFSDB records for unknown cells
  DNS: Separate out CIFS DNS Resolver code
  cifs: account for new creduid=0x%x parameter in spnego upcall string
  cifs: reduce false positives with inode aliasing serverino autodisable
  CIFS: Make cifs_convert_address() take a const src pointer and a length
  cifs: show features compiled in as part of DebugData
  cifs: update README

Fix up trivial conflicts in fs/cifs/cifsfs.c due to workqueue changes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
  workqueue: mark init_workqueues() as early_initcall()
  workqueue: explain for_each_*cwq_cpu() iterators
  fscache: fix build on !CONFIG_SYSCTL
  slow-work: kill it
  gfs2: use workqueue instead of slow-work
  drm: use workqueue instead of slow-work
  cifs: use workqueue instead of slow-work
  fscache: drop references to slow-work
  fscache: convert operation to use workqueue instead of slow-work
  fscache: convert object to use workqueue instead of slow-work
  workqueue: fix how cpu number is stored in work->data
  workqueue: fix mayday_mask handling on UP
  workqueue: fix build problem on !CONFIG_SMP
  workqueue: fix locking in retry path of maybe_create_worker()
  async: use workqueue for worker pool
  workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
  workqueue: implement unbound workqueue
  workqueue: prepare for WQ_UNBOUND implementation
  libata: take advantage of cmwq and remove concurrency limitations
  workqueue: fix worker management invocation without pending works
  ...

Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c

Commit f9d7562f "nfsd4: share file
descriptors between stateid's" didn't correctly account for O_RDWR opens.
Symptoms include leaked files, resulting in failures to unmount and/or
warnings about orphaned inodes on reboot.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Merge branch 'x86-xsave-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-xsave-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, xsave: Make xstate_enable_boot_cpu() __init, protect on CPU 0
  x86, xsave: Add __init attribute to setup_xstate_features()
  x86, xsave: Make init_xstate_buf static
  x86, xsave: Check cpuid level for XSTATE_CPUID (0x0d)
  x86, xsave: Introduce xstate enable functions
  x86, xsave: Separate fpu and xsave initialization
  x86, xsave: Move boot cpu initialization to xsave_init()
  x86, xsave: 32/64 bit boot cpu check unification in initialization
  x86, xsave: Do not include asm/i387.h in asm/xsave.h
  x86, xsave: Use xsaveopt in context-switch path when supported
  x86, xsave: Sync xsave memory layout with its header for user handling
  x86, xsave: Track the offset, size of state in the xsave layout

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: Use HW_ERR in MCE handler
  x86, mce: Add HW_ERR printk prefix for hardware error logging
  x86, mce: Fix MSR_IA32_MCI_CTL2 CMCI threshold setup
  x86, mce: Rename MSR_IA32_MCx_CTL2 value

Merge branch 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, olpc: Constify an olpc_ofw() arg
  x86, olpc: Use pr_debug() for EC commands
  x86, olpc: Add comment about implicit optimization barrier
  x86, olpc: Add support for calling into OpenFirmware