- 12 May, 2006 34 commits
-
-
Vadim Catana authored
- fixed the reception of channels with low symbol rates. ( The VGA1 and VGA2 offsets recommended by cx24109 docs for symbol rates from 1 to 5 MSps do not work. I changed them to values found experimentally. The charge pump current and FILTUNE voltage are now set to values recommended in the docs. This improves reception for symbol rates < 15 MSps. The values written in the SYSSymbolRate registers are calculated with better precision. ) - fixed the cx24123_get_fec() function. It was returning the values for DCII mode. - removed some unused variables Signed-off-by: Vadim Catana <skystar at moldova.cc> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Eric Sesterhenn authored
In several places we use dev->devno right after we kfree() dev. This fixes coverity bug id #1065 Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
V4L1 API is depreciated and should be removed soon from kernel. This patch adds two new options, one to disable V4L1 drivers, and another to disable V4L1 compat module. This way, it would be easy to check what still depends on V4L1 stuff, allowing also to test if app works fine with V4L2 only support. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Jose Alberto Reguero authored
Witout this patch tv out don't work properly with my pvr350 card. Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Duncan Sands authored
The computation in cx88_risc_buffer suffers from the mistake: a non-zero padding value can cause more page borders to be crossed, leading to big buffer over-runs. This patch changes the additive constant from 3 + 4 to 4 It also changees the constant in cx88_risc_databuffer from 3 + 4 to 2, because 2 dwords are the correct vaule. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Trent Piepho authored
It looks like the HD3000 was prototyped with the 7610 tuner when the driver was developed, but the cards appear to have always shipped with the 7612 tuner and the driver was never adjusted for it. The definition needs to be corrected. - The HD-3000 was prototyped with a Thomson DTT7610, but production versions used a DTT7612 tuner. - This patch changes both dvb-pll settings and V4L tuner type. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
When pluto2 were selected, all other module dependencies were just discarded. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
Spotted a couple more places where it fails to check if dvb_register_adapter() fails. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
Now that the CI code reinitialises the frontend, need to move the CI initialisation to after the frontend init in order to ensure the frontend is always in a good state. Fixes an oops caused by the frontend being NULL as well. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Sergey Vlasov authored
When disable_ir=1 parameter is used, or when saa7134_input_init1() fails for any other reason, dev->remote will remain NULL, and the driver will oops in saa7134_hwinit2(). Therefore dev->remote must be checked before dereferencing. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
- replaced '$(src)/..' with 'drivers/media/video' Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
It turns out the firmware on the TT budget-ci 1.1 slots doesn't generate interrupts. This patch adds support for this using polling mode on these slots. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
This mutex is meant to stop two devices getting the same ID. dvbdev_get_free_id() scans the list of already allocated devices to find a free id. Unfortunately, since the mutex is unlocked before the card is added to the above list, it is still possible for two of them to get the same id. Its debatable whether this mutex lock is actually needed, but I'm unwilling to just remove it in case something does depend on it. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Duncan Sands authored
There are tree mistakes on bttv_risc_overlay. 1) When skip_odd is true, the number of lines for which instructions are written is (height+1)/2, not height/2. 2) This occurs when clipping: the number of instruction bytes written can be as much as 8 + 12*nclips, not 8 + 8*nclips, as currently estimated. 3) Coverity check were wrong with nskips=0, since it means that it can clipped at most one line. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Fix warning on prom_getproperty in openprom.c [SPARC]: Handle UNWIND_INFO properly. [SPARC64]: Update defconfig. [SPARC]: show device name in /proc/dvma_map [SPARC]: Remove duplicate symbol exports
-
Sean Hefty authored
Fix race condition during destruction calls to avoid possibility of accessing object after it has been freed. Instead of waking up a wait queue directly, which is susceptible to a race where the object is freed between the reference count going to 0 and the wake_up(), use a completion to wait in the function doing the freeing. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Roland Dreier authored
The ipath driver's table of PCI IDs needs a { 0, } entry at the end. This makes all of the device aliases visible to userspace so hotplug loads the module for all supported devices. Without the patch, modinfo ipath_core only shows: alias: pci:v00001FC1d0000000Dsv*sd*bc*sc*i* instead of the correct: alias: pci:v00001FC1d00000010sv*sd*bc*sc*i* alias: pci:v00001FC1d0000000Dsv*sd*bc*sc*i* Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
-
Martin Habets authored
Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
For sparc32 we need R_SPARC_UA32 relocation support, for sparc64 we need the handle R_SPARC_DISP32 relocations. Based upon reports and initial patch by Martin Habets. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: [PATCH] scx200_acb: Fix for the CS5535 errata [PATCH] scx200_acb: Fix resource name use after free [PATCH] scx200_acb: Fix return on init error
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: [PATCH] USB: fix omninet driver bug [PATCH] USB: add ark3116 usb to serial driver [PATCH] usbserial: Fixes leak in serial_open() error path. [PATCH] usbserial: Fixes use-after-free in serial_open(). [PATCH] USB: Emagic USB firmware loading fixes [PATCH] USB: add an IBM USB keyboard to the HID_QUIRK_NOGET blacklist [PATCH] USB: Add Sieraa Wireless 580 evdo card to airprime.c [PATCH] USB: ftdi_sio: add device id for ACT Solutions HomePro ZWave interface [PATCH] USB: ftdi_sio: Add support for HCG HF Dual ISO RFID Reader [PATCH] USB: ub oops in block_uevent [PATCH] USB: usbcore: don't check the device's power source [PATCH] USB: fix OHCI PM regression [PATCH] USB: pegasus fixes (logstorm, suspend) [PATCH] USBATM: fix modinfo output [PATCH] USBATM: change the default speedtouch iso altsetting [PATCH] USB: fix bug in ohci-hcd.c ohci_restart()
-
Linus Torvalds authored
This reverts commit 56cf6504. Both Erik Mouw and Andrew Vasquez independently pinpointed this commit as causing problems, where the slab cache for a driver is never released (most obviously causing problems when immediately re-loading that driver, resulting in a "kmem_cache_create: duplicate cache <xyz>" message, but it can also cause other trouble). James Bottomley dug into it, and reports: "OK, here's the scoop. The problem patch adds a get of driverfs_dev in add_disk(), but doesn't put it again until disk_release() (which occurs on final put_disk() of the gendisk). However, in SCSI, the driverfs_dev is the sdev_gendev. That means there's a reference held on sdev_gendev until final disk put. Unfortunately, we use the driver model driver_remove to trigger del_gendisk (which removes the gendisk from visibility and decrements the refcount), so we've introduced an unbreakable deadlock in the reference counting with this. I suggest simply reversing this patch at the moment. If Russell and Jens can tell me what they're trying to do I'll see if there's another way to do it." so hereby the patch gets reverted, waiting for a better fix. Cc: Jens Axboe <axboe@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: Erik Mouw <erik@harddisk-recovery.com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Kroah-Hartman authored
I introduced this way back in 2.6.13 when adding the port lock logic. This device talks out through different "ports" all at the same time, so the lock logic was wrong, preventing any data from ever being sent properly. Thanks a lot to Bernhard Reiter <bernhard@intevation.de> for being patient and helping with debugging this. Cc: Bernhard Reiter <bernhard@intevation.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
Based on Simon's original driver, with some minor code cleanups and tidying by me. Cc: Simon Schulz <simon@auctionant.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Luiz Fernando Capitulino authored
If serial_open() fails at the port assignment or mutex_lock_interruptible() is interrupted, the 'serial' object will never be freed. We should call kref_put() when those errors happens. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Luiz Fernando Capitulino authored
If the device is disconnected while serial_open() is executing and either try_module_get() or the device specific open function fails, the kref_put() call in the 'bailout_kref_put' label will free the memory pointed out by 'port'. The subsequent dereferences in the 'bailout_kref_put' label will be invalid. The fix is just to assure kref_put() is called after any 'port' usage. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Monty authored
It's become apparent as machines get faster that the emagic kernel firmware loaders (based on the ezusb loader) have a reset race. a 400MHz TiBook never tripped it, but a 2GHz Pentium M seems to hit it about 30% of the time. The bug is seen as a hung USB box and the kernel error: drivers/usb/misc/emi62.c: emi62_load_firmware - error loading firmware: error = -110 The patch below inserts a delay after deasserting reset to allow the box to settle before a new command is issued. This affects only device startup. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Olaf Hering authored
After recent changes, the USB keyboard as shipped with IBM pSeries systems does not work anymore, unless the keyboard is replugged after reboot. Adding this model to the blacklist fixes it. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ken Brush authored
This adds the Sierra Wireless card to airprime.c. I tested this on my laptop. Signed-off-by: Ken Brush <ken@cgi101.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 11 May, 2006 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3508/1: Update collie defconfig [ARM] Fix thread struct allocator for SMP case [ARM] Update mach-types [ARM] Update versatile_defconfig
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] 8250: add locking to console write function [SERIAL] Remove unconditional enable of TX irq for console [SERIAL] 8250: set divisor register correctly for AMD Alchemy SoC uart [SERIAL] AMD Alchemy UART: claim memory range [SERIAL] Clean up serial locking when obtaining a reference to a port
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET_SCHED]: HFSC: fix thinko in hfsc_adjust_levels() [IPV6]: skb leakage in inet6_csk_xmit [BRIDGE]: Do sysfs registration inside rtnl. [NET]: Do sysfs registration as part of register_netdevice. [TG3]: Fix possible NULL deref in tg3_run_loopback(). [NET] linkwatch: Handle jiffies wrap-around [IRDA]: Switching to a workqueue for the SIR work [IRDA]: smsc-ircc: Minimal hotplug support. [IRDA]: Removing unused EXPORT_SYMBOLs [IRDA]: New maintainer. [NET]: Make netdev_chain a raw notifier. [IPV4]: ip_options_fragment() has no effect on fragmentation [NET]: Add missing operstates documentation.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (25 commits) [SCSI] mptfc: race between mptfc_register_dev and mptfc_target_alloc [SCSI] lpfc 8.1.6 : Fix Data Corruption in Bus Reset Path [SCSI] mptspi: revalidate negotiation parameters after host reset and resume [SCSI] srp.h: avoid padding of structs [SCSI] ibmvscsi: fix leak when failing to send srp event [SCSI] qla2xxx: Correct eh_abort recovery logic. [SCSI] megaraid_{mm,mbox}: fix a bug in reset handler [SCSI] fusion - bug fix stack overflow in mptbase [SCSI] scsi: Add IBM 2104-DU3 to blist [SCSI] Fix DVD burning issues. [SCSI] SCSI: aic7xxx_osm_pci resource leak fix. [SCSI] - fusion - mptfc bug fix's to prevent deadlock situations [SCSI] mptfusion: bug fix's for raid components adding/deleting [SCSI] aic7xxx: ahc_pci_write_config() fix [SCSI] megaraid: unused variable [SCSI] qla2xxx: only free_irq() after request_irq() succeeds [SCSI] Overrun in drivers/scsi/sim710.c [SCSI] lpfc 8.1.5 : Change version number to 8.1.5 [SCSI] lpfc 8.1.5 : Misc small fixes [SCSI] lpfc 8.1.5 : Additional fixes to LOGO, PLOGI, and RSCN processing ...
-
Jens Axboe authored
Don't recurse back into the driver even if the unplug threshold is met, when the driver asks for a requeue. This is both silly from a logical point of view (requeues typically happen due to driver/hardware shortage), and also dangerous since we could hit an endless request_fn -> requeue -> unplug -> request_fn loop and crash on stack overrun. Also limit blk_run_queue() to one level of recursion, similar to how blk_start_queue() works. This patch fixed a real problem with SLES10 and lpfc, and it could hit any SCSI lld that returns non-zero from it's ->queuecommand() handler. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-