- 18 Aug, 2017 40 commits
-
-
Bart Van Assche authored
Remove the timeout slot variables and rely on the block layer to detect request timeouts. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Bart Van Assche authored
Introduce a tag set and a blk_mq_ops structure. Set .cmd_size such that struct request and struct skd_request_context are allocated through a single allocation. Remove the skd_request_context.req pointer. Make queue starting asynchronous such that this can occur safely from interrupt context. Use locking to protect skdev->skmsg and *skdev->skmsg against concurrent access from concurrent .queue_rq() calls. Introduce the functions skd_init_request() and skd_exit_request() to set up / clean up the per-request S/G-list. Signed-off-by:
-
Bart Van Assche authored
Set request_queue.cmd_size, introduce skd_init_rq() and skd_exit_rq() and remove skd_device.skreq_table. Signed-off-by:
-
Bart Van Assche authored
Issue a warning if a NULL argument is passed to skd_free_sg_list(). Move this function up to make the blk-mq conversion patch easier to read. Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality but makes the blk-mq conversion patch easier to read. Signed-off-by:
-
Bart Van Assche authored
The only functional change in this patch is that the skd_fitmsg_context in which requests are accumulated is changed from a local variable into a member of struct skd_device. This patch will make the blk-mq conversion easier. Signed-off-by:
-
Bart Van Assche authored
Convert the per-device scalar variables that are protected by the queue lock into atomics such that it becomes safe to access these variables without holding the queue lock. Signed-off-by:
-
Bart Van Assche authored
Use the request tag when allocating a skd_fitmsg_context or skd_request_context such that the lists used to track free elements can be eliminated. Swap the skd_end_request() and skd_release_req() calls to avoid triggering a use-after-free. Remove skd_fitmsg_context.state and .outstanding because FIT messages are shared among requests and because updating a FIT message after a request has finished whould trigger a use-after-free. Signed-off-by:
-
Bart Van Assche authored
The debug code in skd_send_special_fitmsg() assumes that req.n_sg represents the number of S/G descriptors. However, skd_construct() initializes that member variable to zero. Set req.n_sg to one such that the debugging code in skd_send_special_fitmsg() works as expected. Signed-off-by:
-
Bart Van Assche authored
Removing the SG IO code also removed the code that sets SKD_REQ_STATE_ABORTED. Hence also remove the code that checks for this state. Signed-off-by:
-
Bart Van Assche authored
The skd SG IO support duplicates the functionality of the bsg driver. Hence remove it. Signed-off-by:
-
Bart Van Assche authored
This will make it easier to convert this driver to the blk-mq approach. This patch also reduces interrupt latency by moving skd_request_fn() calls out of the skd_isr() interrupt. Signed-off-by:
-
Bart Van Assche authored
Move the skd_fail_all_pending() call out of skd_request_fn_not_online() such that this function can be reused in the blk-mq code path. Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality but makes the next patch in this series easier to read. Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
mem_map[i] is accessed through readl() / writel() hence declaring mem_map as volatile is not necessary. Remove the volatile declarations from struct fit_completion_entry_v1 pointers and struct fit_comp_error_info since reading these structures multiple times is safe. Signed-off-by:
-
Bart Van Assche authored
Since setup_timer() invokes init_timer(), invoking init_timer() just before setup_timer() is redundant. Hence remove the init_timer() call. Signed-off-by:
-
Bart Van Assche authored
This change makes skd_preop_sg_list() support chained sg-lists. Signed-off-by:
-
Bart Van Assche authored
Since all callers pass zero as second argument to skd_recover_requests(), drop that second argument. Signed-off-by:
-
Bart Van Assche authored
The value of skcmp, cmp_cntxt etc. is overwritten during every loop iteration and is not used after the loop has finished. Hence initializing these variables outside the loop is not necessary. This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
Use DMA_FROM_DEVICE and DMA_TO_DEVICE directly instead of introducing driver-private constants with the same numerical value. Signed-off-by:
-
Bart Van Assche authored
Use ARRAY_SIZE() instead of open-coding it. This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
Since needless use of __packed slows down access to data structures, only use __packed when needed. Signed-off-by:
-
Bart Van Assche authored
This patch will help to verify the changes made by the next patch. Signed-off-by:
-
Bart Van Assche authored
This change makes the source code easier to read. Signed-off-by:
-
Bart Van Assche authored
dma_alloc_coherent() guarantees alignment on a page boundary so no explicit alignment is needed to align on a 64 byte boundary. Signed-off-by:
-
Bart Van Assche authored
Due to the previous patch it is guaranteed that the FIT msg contains at least one request after the for-loop has finished. Use this to simplify the code. Signed-off-by:
-
Bart Van Assche authored
Prepare the S/G-list before allocating a FIT msg such that the FIT msg always contains at least one request after the for-loop is finished. Signed-off-by:
-
Bart Van Assche authored
Pass the correct size to pci_free_consistent() in skd_free_skcomp(). Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
Signed-off-by:
-
Bart Van Assche authored
Ensure that sparse does not report any warnings when building the skd driver with sparse verification enabled (C=1 or C=2). Signed-off-by:
-
Bart Van Assche authored
Use dev_err() and dev_info() instead of pr_err() and pr_info(). Since dev_dbg() is able to report file name and line number information, remove __FILE__ and __LINE__ from the dev_dbg() calls. Remove the struct skd_device members and the function (skd_name()) that became superfluous due to these changes. This patch removes the device name and serial number from log statements. An example of the old log line format: (skd0:STM000196603:[0000:00:09.0]): Driver state STARTING(3)=>ONLINE(4) An example of the new log line format: skd:0000:00:09.0: Driver state STARTING(3)=>ONLINE(4) Signed-off-by:
-
Bart Van Assche authored
The purpose of barrier() is to prevent reordering by the compiler. Since the compiler does not reorder calls to non-pure functions, remove the barrier() calls from skd_reg_{read,write}{32,64}(). Since pr_debug() is able to report file name and line number information, remove __FILE__ and __LINE__ from the pr_debug() calls. Signed-off-by: -
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
These variables have been detected by building with W=1. Declare 'acc' as __maybe_unused because most access_ok() implementations ignore their first argument. This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
There is no function skd_completion_posted_isr() in the skd driver but there is a function called skd_isr_completion_posted(). Fix the function name in the comment. Signed-off-by:
-
