- 21 Jun, 2021 4 commits
-
-
Lang Cheng authored
In order to avoid to do bitwise operations on a boolean value, add a new register interface to avoid sparse comlaint about "dubious: x & !y" when calling hr_reg_write(ctx, field, !!val). Fixes: dc504774 ("RDMA/hns: Use new interface to set MPT related fields") Fixes: 495c2480 ("RDMA/hns: Add XRC subtype in QPC and XRC type in SRQC") Link: https://lore.kernel.org/r/1624262443-24528-4-git-send-email-liweihang@huawei.comSigned-off-by:
Lang Cheng <chenglang@huawei.com> Signed-off-by:
Weihang Li <liweihang@huawei.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com>
-
Weihang Li authored
GCC may reports an running time assert error when a value calculated from ib_mtu_enum_to_int() is using as 'val' in FIELD_PREDP: include/linux/compiler_types.h:328:38: error: call to '__compiletime_assert_1524' declared with attribute error: FIELD_PREP: value too large for the field So a check is added about whether integer mtu from ib_mtu_enum_to_int() is negative to avoid this warning. Link: https://lore.kernel.org/r/1624262443-24528-3-git-send-email-liweihang@huawei.comReported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Weihang Li authored
There is no need to use "!!" before "eq->eqe_size == HNS_ROCE_V3_EQE_SIZE", or sparse will complain about "dubious: x & !y". Fixes: 782832f2 ("RDMA/hns: Simplify the function config_eqc()") Link: https://lore.kernel.org/r/1624262443-24528-2-git-send-email-liweihang@huawei.comSigned-off-by:
-
Avihai Horon authored
Relaxed Ordering is a capability that can only benefit users that support it. All kernel ULPs should support Relaxed Ordering, as they are designed to read data only after observing the CQE and use the DMA API correctly. Hence, implicitly enable Relaxed Ordering by default for MR transfers in kernel ULPs. Link: https://lore.kernel.org/r/b7e820aab7402b8efa63605f4ea465831b3b1e5e.1623236426.git.leonro@nvidia.comSigned-off-by:
Avihai Horon <avihaih@nvidia.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
- 18 Jun, 2021 6 commits
-
-
Xi Wang authored
Both of HIP08 and HIP09 require the extended doorbell information to be cleared before being used. Fixes: 6b63597d ("RDMA/hns: Add TSQ link table support") Link: https://lore.kernel.org/r/1623392089-35639-1-git-send-email-liweihang@huawei.comSigned-off-by:
Xi Wang <wangxi11@huawei.com> Signed-off-by:
-
Jack Wang authored
Currently we only check device max_qp_wr limit for IO connection, but not for service connection. We should check for both. So save the max_qp_wr device limit in wr_limit, and use it for both IO connections and service connections. While at it, also remove an outdated comments. Link: https://lore.kernel.org/r/20210614090337.29557-6-jinpu.wang@ionos.comSuggested-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
Gioh Kim <gi-oh.kim@ionos.com> Reviewed-by:
-
Guoqing Jiang authored
Those variables are passed to create_cq, create_qp, rtrs_iu_alloc and rtrs_iu_free, so these *_size means the num of unit. And cq_size also means number of cq element. Also move the setting of cq_num to common path. Link: https://lore.kernel.org/r/20210614090337.29557-5-jinpu.wang@ionos.comSigned-off-by:
Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Reviewed-by:
Md Haris Iqbal <haris.iqbal@cloud.ionos.com> Signed-off-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by:
-
Md Haris Iqbal authored
When using rdma_rxe, post_one_recv() returns ENOMEM error due to the full recv queue. This patch increase the number of WR for receive queue to support all devices. Link: https://lore.kernel.org/r/20210614090337.29557-4-jinpu.wang@ionos.comSigned-off-by:
-
Jack Wang authored
We use device limit max_send_sge, which is suboptimal for memory usage. We don't need that much for User Con, 1 is enough. And for IO con, sess->max_segments + 1 is enough Link: https://lore.kernel.org/r/20210614090337.29557-3-jinpu.wang@ionos.comSigned-off-by:
-
Jack Wang authored
Currently rtrs when create_qp use a coarse numbers (bigger in general), which leads to hardware create more resources which only waste memory with no benefits. For max_send_wr, we don't really need alway max_qp_wr size when creating qp, reduce it to cq_size. For max_recv_wr, cq_size is enough. With the patch when sess_queue_depth=128, per session (2 paths) memory consumption reduced from 188 MB to 65MB When always_invalidate is enabled, we need send more wr, so treat it special. Fixes: 9cb83748 ("RDMA/rtrs: server: main functionality") Link: https://lore.kernel.org/r/20210614090337.29557-2-jinpu.wang@ionos.comSigned-off-by:
-
- 16 Jun, 2021 28 commits
-
-
Jason Gunthorpe authored
The driver's device group can be specified as part of the ops structure like the device's port group. No need for the complicated API. Link: https://lore.kernel.org/r/8964785a34fd3a29ff5b6693493f575b717e594d.1623427137.git.leonro@nvidia.comSigned-off-by:
-
Jason Gunthorpe authored
Now that the port_groups data is being destroyed and managed by the core code this restriction is no longer needed. All the ib_port_attrs are compatible with the core's sysfs lifecycle. When the main device is destroyed and moved to another namespace the driver's port sysfs can be created/destroyed as well due to it now being a simple attribute list. Link: https://lore.kernel.org/r/afd8b676eace2821692d44489ff71856277c48d1.1623427137.git.leonro@nvidia.comSigned-off-by:
-
Jason Gunthorpe authored
init_port was only being used to register sysfs attributes against the port kobject. Now that all users are creating static attribute_group's we can simply set the attribute_group list in the ops and the core code can just handle it directly. This makes all the sysfs management quite straightforward and prevents any driver from abusing the naked port kobject in future because no driver code can access it. Link: https://lore.kernel.org/r/114f68f3d921460eafe14cea5a80ca65d81729c3.1623427137.git.leonro@nvidia.comSigned-off-by:
-
Jason Gunthorpe authored
hfi1 should not be creating a mess of kobjects to attach to the port kobject - this is all attributes. The proper API is to create an attribute_group list and create it against the port's kobject. Link: https://lore.kernel.org/r/cbe0ccb6175dd22274359b6ad803a37435a70e91.1623427137.git.leonro@nvidia.comTested-by:
Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by:
-
Jason Gunthorpe authored
qib should not be creating a mess of kobjects to attach to the port kobject - this is all attributes. The proper API is to create an attribute_group list and create it against the port's kobject. Link: https://lore.kernel.org/r/911e0031e1ed495b0006e8a6efec7b67a702cd5e.1623427137.git.leonro@nvidia.comTested-by:
-
Jason Gunthorpe authored
This code is trying to attach a list of counters grouped into 4 groups to the ib_port sysfs. Instead of creating a bunch of kobjects simply express everything naturally as an ib_port_attribute and add a single attribute_groups list. Remove all the naked kobject manipulations. Link: https://lore.kernel.org/r/0d5a7241ee0fe66622de04fcbaafaf6a791d5c7c.1623427137.git.leonro@nvidia.comSigned-off-by:
-
Jason Gunthorpe authored
Other things outside the core code are creating attributes against the port. This patch exposes the basic machinery to do this. The ib_port_attribute type allows creating groups of attributes attatched to the port and comes with the usual machinery to do this. Link: https://lore.kernel.org/r/5c4aeae57f6fa7c59a1d6d1c5506069516ae9bbf.1623427137.git.leonro@nvidia.comSigned-off-by:
-
Jason Gunthorpe authored
This call does nothing because the ib_port kobj is nested under a struct device kobject and the dev_uevent_filter() function of the struct device blocks uevents for any children kobj's that are not also struct devices. A uevent for the struct device will be triggered after ib_setup_port_attrs() returns which causes udev to pick up all the deep "attributes" which are implemented as kobjects nested under a struct device and assign them to the udev object for the struct device: $ udevadm info -a /sys/class/infiniband/ibp0s9 ATTR{ports/1/counters/excessive_buffer_overrun_errors}=="0" Link: https://lore.kernel.org/r/49231c92c7d4c60686de18f7e20932d0c82160ee.1623427137.git.leonro@nvidia.comSigned-off-by: -
Jason Gunthorpe authored
Instead of calling device_add_groups() add the group to the existing groups array which is managed through device_add(). This requires setting up the hw_counters before device_add(), so it gets split up from the already split port sysfs flow. Move all the memory freeing to the release function. Link: https://lore.kernel.org/r/666250d937b64f6fdf45da9e2dc0b6e5e4f7abd8.1623427137.git.leonro@nvidia.comSigned-off-by:
-
Jason Gunthorpe authored
Use the same technique as gid_attrs now uses to manage the port sysfs. Bundle everything into three allocations and use a single sysfs_create_groups() to build everything in one shot. All the memory is always freed in the kobj release function, removing most of the error unwinding. The gid_attr technique and the hw_counters are very similar, merge the two together and combine the sysfs_create_group() call for hw_counters with the single sysfs group setup. Link: https://lore.kernel.org/r/b688f3340694c59f7b44b1bde40e25559ef43cf3.1623427137.git.leonro@nvidia.comSigned-off-by:
-
Jason Gunthorpe authored
Instead of having an whole bunch of different allocations to create the gid_attr kobjects reduce it to three, one for the kobj struct plus the attributes, and one for the attribute list for each of the two groups. Move the freeing of all allocations to the release function. Reorder the operations so all the allocations happen first then the kobject & sysfs operations are last. This removes the majority of the complicated error unwind since the release function will always undo all the memory allocations. Freeing the memory is also much simpler since there is a lot less of it. Consolidate creating the "group of array indexes" pattern into one helper function. Ensure kobject_del is used. Link: https://lore.kernel.org/r/f4149d379db7178d37d11d75e3026bf550f818a1.1623427137.git.leonro@nvidia.comSigned-off-by:
-
Jason Gunthorpe authored
The gid_attrs directory is a dedicated kobj nested under the port, construct/destruct it with its own pair of functions for understandability. This is much more readable than having it weirdly inlined out of order into the add_port() function. Link: https://lore.kernel.org/r/1c9434111b6770a7aef0e644a88a16eee7e325b8.1623427137.git.leonro@nvidia.comSigned-off-by:
-
Jason Gunthorpe authored
This code creates a 'struct hw_stats_attribute' for each sysfs entry that contains a naked 'struct attribute' inside. It then proceeds to attach this same structure to a 'struct device' kobj and a 'struct ib_port' kobj. However, this violates the typing requirements. 'struct device' requires the attribute to be a 'struct device_attribute' and 'struct ib_port' requires the attribute to be 'struct port_attribute'. This happens to work because the show/store function pointers in all three structures happen to be at the same offset and happen to be nearly the same signature. This means when container_of() was used to go between the wrong two types it still managed to work. However clang CFI detection notices that the function pointers have a slightly different signature. As with show/store this was only working because the device and port struct layouts happened to have the kobj at the front. Correct this by have two independent sets of data structures for the port and device case. The two different attributes correctly include the port/device_attribute struct and everything from there up is kept split. The show/store function call chains start with device/port unique functions that invoke a common show/store function pointer. Link: https://lore.kernel.org/r/a8b3864b4e722aed3657512af6aa47dc3c5033be.1623427137.git.leonro@nvidia.comReported-by:
Nathan Chancellor <nathan@kernel.org> Tested-by:
-
Jason Gunthorpe authored
It is much saner to store a pointer to the kobject structure that contains the cannonical stats pointer than to copy the stats pointers into a public structure. Future patches will require the sysfs pointer for other purposes. Link: https://lore.kernel.org/r/f90551dfd296cde1cb507bbef27cca9891d19871.1623427137.git.leonro@nvidia.comSigned-off-by:
-
Jason Gunthorpe authored
This is being used to implement both the port and device global stats, which is causing some confusion in the drivers. For instance EFA and i40iw both seem to be misusing the device stats. Split it into two ops so drivers that don't support one or the other can leave the op NULL'd, making the calling code a little simpler to understand. Link: https://lore.kernel.org/r/1955c154197b2a159adc2dc97266ddc74afe420c.1623427137.git.leonro@nvidia.comTested-by:
Gal Pressman <galpress@amazon.com> Signed-off-by:
-
Bob Pearson authored
Check that an MR has no bound MWs before allowing a dereg or invalidate operation. Link: https://lore.kernel.org/r/20210608042552.33275-11-rpearsonhpe@gmail.comSigned-off-by:
Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by:
-
Bob Pearson authored
Add code to implement memory access through memory windows. Link: https://lore.kernel.org/r/20210608042552.33275-10-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
Implement invalidate MW and cleaned up invalidate MR operations. Added code to perform remote invalidate for send with invalidate. Added code to perform local invalidation. Deleted some blank lines in rxe_loc.h. Link: https://lore.kernel.org/r/20210608042552.33275-9-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
Add support for bind MW work requests from user space. Since rdma/core does not support bind mw in ib_send_wr there is no way to support bind mw in kernel space. Added bind_mw local operation in rxe_req.c. Added bind_mw WR operation in rxe_opcode.c. Added bind_mw WC in rxe_comp.c. Added additional fields to rxe_mw in rxe_verbs.h. Added rxe_do_dealloc_mw() subroutine to cleanup an mw when rxe_dealloc_mw is called. Added code to implement bind_mw operation in rxe_mw.c Link: https://lore.kernel.org/r/20210608042552.33275-8-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
Simplify rxe_requester() by moving the local operations to a subroutine. Add an error return for illegal send WR opcode. Moved next_index ahead of rxe_run_task which fixed a small bug where work completions were delayed until after the next wqe which was not the intended behavior. Let errors return their own WC status. Previously all errors were reported as protection errors which was incorrect. Changed the return of errors from rxe_do_local_ops() to err: which causes an immediate completion. Without this an error on a last WR may get lost. Changed fill_packet() to finish_packet() which is more accurate. Fixes: 8700e2e7c485 ("The software RoCE driver") Link: https://lore.kernel.org/r/20210608042552.33275-7-rpearsonhpe@gmail.comSigned-off-by: -
Bob Pearson authored
Rxe has two mask bits WR_LOCAL_MASK and WR_REG_MASK with WR_REG_MASK used to indicate any local operation and WR_LOCAL_MASK unused. This patch replaces both of these with one mask bit WR_LOCAL_OP_MASK which is clearer. Link: https://lore.kernel.org/r/20210608042552.33275-6-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
Add ib_alloc_mw and ib_dealloc_mw verbs APIs. Added new file rxe_mw.c focused on MWs. Changed the 8 bit random key generator. Added a cleanup routine for MWs. Added verbs routines to ib_device_ops. Link: https://lore.kernel.org/r/20210608042552.33275-5-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
Currently the rxe driver has a rxe_mw struct object but nothing about memory windows is enabled. This patch turns on memory windows and some minor cleanup. Set device attribute in rxe.c so max_mw = MAX_MW. Change parameters in rxe_param.h so that MAX_MW is the same as MAX_MR. Reduce the number of MRs and MWs to 4K from 256K. Add device capability bits for 2a and 2b memory windows. Removed RXE_MR_TYPE_MW from the rxe_mr_type enum. Link: https://lore.kernel.org/r/20210608042552.33275-4-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
Modify rxe_add_index() and rxe_add_key() to return an error if the index or key is aleady present in the pool. Currently they print a warning and silently fail with bad consequences to the caller. Link: https://lore.kernel.org/r/20210608042552.33275-3-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
Add fields to struct rxe_send_wr in rdma_user_rxe.h to support bind MW work requests Link: https://lore.kernel.org/r/20210608042552.33275-2-rpearsonhpe@gmail.comSigned-off-by:
-
Bob Pearson authored
Currently the rdma_rxe driver attempts to protect atomic responder resources by taking a reference to the qp which is only freed when the resource is recycled for a new read or atomic operation. This means that in normal circumstances there is almost always an extra qp reference once an atomic operation has been executed which prevents cleaning up the qp and associated pd and cqs when the qp is destroyed. This patch removes the call to rxe_add_ref() in send_atomic_ack() and the call to rxe_drop_ref() in free_rd_atomic_resource(). If the qp is destroyed while a peer is retrying an atomic op it will cause the operation to fail which is acceptable. Link: https://lore.kernel.org/r/20210604230558.4812-1-rpearsonhpe@gmail.comReported-by:
Zhu Yanjun <zyjzyj2000@gmail.com> Fixes: 86af6176 ("IB/rxe: remove unnecessary skb_clone") Signed-off-by:
-
Xi Wang authored
All functions of HIP09's ROCEE share on-chip resources for all QPs, the driver needs configure the resource index and number for each function during the init stage. Link: https://lore.kernel.org/r/1622541427-42193-1-git-send-email-liweihang@huawei.comSigned-off-by:
-
Leon Romanovsky authored
The mlx5_ib_bind_slave_port() doesn't remove multiport device from the unaffiliated list, but mlx5_ib_unbind_slave_port() did it. This unbalanced flow caused to the situation where mlx5_ib_unaffiliated_port_list was changed during iteration. Fixes: 32f69e4b ("{net, IB}/mlx5: Manage port association for multiport RoCE") Link: https://lore.kernel.org/r/2726e6603b1e6ecfe76aa5a12a063af72173bcf7.1622477058.git.leonro@nvidia.comReported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 10 Jun, 2021 2 commits
-
-
Shiraz Saleem authored
The level1 PBL info address is stored as u64. This requires casting through a uinptr_t before used as a pointer type. And this leads to sparse warning such as this when uinptr_t is missing: drivers/infiniband/hw/irdma/hw.c: In function 'irdma_destroy_virt_aeq': drivers/infiniband/hw/irdma/hw.c:579:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 579 | dma_addr_t *pg_arr = (dma_addr_t *)aeq->palloc.level1.addr; This can be fixed using an intermediate uintptr_t, but rather it is better to fix the structure irdm_pble_info to store the address as u64* and the VA it is assigned in irdma_chunk as a void*. This greatly reduces the casting on this address. Fixes: 44d9e529 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20210609234924.938-1-shiraz.saleem@intel.comReported-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Jason Gunthorpe authored
It turns out this is only being used to store the LID for SIDR mode to search the RB tree for request de-duplication. Store the LID value directly and don't pretend it is a GID. Link: https://lore.kernel.org/r/2e7c87b6f662c90c642fc1838e363ad3e6ef14a4.1623236345.git.leonro@nvidia.comReviewed-by:
Mark Zhang <markzhang@nvidia.com> Signed-off-by:
-
