- 26 Jan, 2018 1 commit
-
-
Francois Romieu authored
Hardware statistics retrieval hurts in tight invocation loops. Avoid extraneous write and enforce strict ordering of writes targeted to the tally counters dump area address registers. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Oliver Freyermuth <o.freyermuth@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Jan, 2018 3 commits
-
-
Nicolas Dichtel authored
Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to: "BUG: unable to handle kernel NULL pointer dereference at (null)" Let's add a helper to check if update_pmtu is available before calling it. Fixes: 52a589d5 ("geneve: update skb dst pmtu on tx path") Fixes: a93bf0ff ("vxlan: update skb dst pmtu on tx path") CC: Roman Kapl <code@rkapl.cz> CC: Xin Long <lucien.xin@gmail.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Streetman authored
When a tcp socket is closed, if it detects that its net namespace is exiting, close immediately and do not wait for FIN sequence. For normal sockets, a reference is taken to their net namespace, so it will never exit while the socket is open. However, kernel sockets do not take a reference to their net namespace, so it may begin exiting while the kernel socket is still open. In this case if the kernel socket is a tcp socket, it will stay open trying to complete its close sequence. The sock's dst(s) hold a reference to their interface, which are all transferred to the namespace's loopback interface when the real interfaces are taken down. When the namespace tries to take down its loopback interface, it hangs waiting for all references to the loopback interface to release, which results in messages like: unregister_netdevice: waiting for lo to become free. Usage count = 1 These messages continue until the socket finally times out and closes. Since the net namespace cleanup holds the net_mutex while calling its registered pernet callbacks, any new net namespace initialization is blocked until the current net namespace finishes exiting. After this change, the tcp socket notices the exiting net namespace, and closes immediately, releasing its dst(s) and their reference to the loopback interface, which lets the net namespace continue exiting. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811Signed-off-by: Dan Streetman <ddstreet@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Avoid negative netdev refcount in error flow of xfrm state add, from Aviad Yehezkel. 2) Fix tcpdump decoding of IPSEC decap'd frames by filling in the ethernet header protocol field in xfrm{4,6}_mode_tunnel_input(). From Yossi Kuperman. 3) Fix a syzbot triggered skb_under_panic in pppoe having to do with failing to allocate an appropriate amount of headroom. From Guillaume Nault. 4) Fix memory leak in vmxnet3 driver, from Neil Horman. 5) Cure out-of-bounds packet memory access in em_nbyte EMATCH module, from Wolfgang Bumiller. 6) Restrict what kinds of sockets can be bound to the KCM multiplexer and also disallow when another layer has attached to the socket and made use of sk_user_data. From Tom Herbert. 7) Fix use before init of IOTLB in vhost code, from Jason Wang. 8) Correct STACR register write bit definition in IBM emac driver, from Ivan Mikhaylov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/ibm/emac: wrong bit is used for STA control register write net/ibm/emac: add 8192 rx/tx fifo size vhost: do not try to access device IOTLB when not initialized vhost: use mutex_lock_nested() in vhost_dev_lock_vqs() i40e: flower: check if TC offload is enabled on a netdev qed: Free reserved MR tid qed: Remove reserveration of dpi for kernel kcm: Check if sk_user_data already set in kcm_attach kcm: Only allow TCP sockets to be attached to a KCM mux net: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr net: sched: em_nbyte: don't add the data offset twice mlxsw: spectrum_router: Don't log an error on missing neighbor vmxnet3: repair memory leak ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL pppoe: take ->needed_headroom of lower device into account on xmit xfrm: fix boolean assignment in xfrm_get_type_offload xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version xfrm: fix error flow in case of add state fails xfrm: Add SA to hardware at the end of xfrm_state_construct()
-
- 24 Jan, 2018 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc bugfix from David Miller: "Sparc Makefile typo fix" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: fix typo in CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64
-
Ivan Mikhaylov authored
STA control register has areas of mode and opcodes for opeations. 18 bit is using for mode selection, where 0 is old MIO/MDIO access method and 1 is indirect access mode. 19-20 bits are using for setting up read/write operation(STA opcodes). In current state 'read' is set into old MIO/MDIO mode with 19 bit and write operation is set into 18 bit which is mode selection, not a write operation. To correlate write with read we set it into 20 bit. All those bit operations are MSB 0 based. Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Mikhaylov authored
emac4syn chips has availability to use 8192 rx/tx fifo buffer sizes, in current state if we set it up in dts 8192 as example, we will get only 2048 which may impact on network speed. Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
The code will try to access dev->iotlb when processing VHOST_IOTLB_INVALIDATE even if it was not initialized which may lead to NULL pointer dereference. Fixes this by check dev->iotlb before. Fixes: 6b1e6cc7 ("vhost: new device IOTLB API") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
We used to call mutex_lock() in vhost_dev_lock_vqs() which tries to hold mutexes of all virtqueues. This may confuse lockdep to report a possible deadlock because of trying to hold locks belong to same class. Switch to use mutex_lock_nested() to avoid false positive. Fixes: 6b1e6cc7 ("vhost: new device IOTLB API") Reported-by: syzbot+dbb7c1161485e61b0241@syzkaller.appspotmail.com Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Since TC block changes drivers are required to check if the TC hw offload flag is set on the interface themselves. Fixes: 2f4b411a ("i40e: Enable cloud filters via tc-flower") Fixes: 44ae12a7 ("net: sched: move the can_offload check from binding phase to rule insertion phase") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Amritha Nambiar <amritha.nambiar@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Corentin Labbe authored
This patch fixes the typo CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64 Fixes: 81658ad0 ("sparc64: Add CAMELLIA driver making use of the new camellia opcodes.") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michal Kalderon says: ==================== qed: rdma bug fixes This patch contains two small bug fixes related to RDMA. Both related to resource reservations. ==================== Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kalderon authored
A tid was allocated for reserved MR during initialization but not freed. This lead to an annoying output message during rdma unload flow. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kalderon authored
Double reservation for kernel dedicated dpi was performed. Once in the core module and once in qedr. Remove the reservation from core. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tom Herbert says: ==================== kcm: fix two syzcaller issues In this patch set: - Don't allow attaching non-TCP or listener sockets to a KCM mux. - In kcm_attach Check if sk_user_data is already set. This is under lock to avoid race conditions. More work is need to make all of the users of sk_user_data to use the same locking. - v2 Remove unncessary check for not PF_KCM in kcm_attach (suggested by Guillaume Nault) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
This is needed to prevent sk_user_data being overwritten. The check is done under the callback lock. This should prevent a socket from being attached twice to a KCM mux. It also prevents a socket from being attached for other use cases of sk_user_data as long as the other cases set sk_user_data under the lock. Followup work is needed to unify all the use cases of sk_user_data to use the same locking. Reported-by: syzbot+114b15f2be420a8886c3@syzkaller.appspotmail.com Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Signed-off-by: Tom Herbert <tom@quantonium.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
TCP sockets for IPv4 and IPv6 that are not listeners or in closed stated are allowed to be attached to a KCM mux. Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot+8865eaff7f9acd593945@syzkaller.appspotmail.com Signed-off-by: Tom Herbert <tom@quantonium.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
James Morris authored
Update my email address. Signed-off-by: James Morris <jmorris@namei.org>
-
Wolfgang Bumiller authored
TCF_LAYER_LINK and TCF_LAYER_NETWORK returned the same pointer as skb->data points to the network header. Use skb_mac_header instead. Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wolfgang Bumiller authored
'ptr' is shifted by the offset and then validated, the memcmp should not add it a second time. Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "With the new ORC unwinder, ftrace stack tracing became disfunctional. One was that ORC didn't know how to handle the ftrace callbacks in general (which Josh fixed). The other was that ORC would just bail if it hit a dynamically allocated trampoline. Which means all ftrace stack tracing that happens from the function tracer would produce no results (that includes killing the max stack size tracer). I added a check to the ORC unwinder to see if the trampoline belonged to ftrace, and if it did, use the orc entry of the static trampoline that was used to create the dynamic one (it would be identical). Finally, I noticed that the skip values of the stack tracing were out of whack. I went through and fixed them up" * tag 'trace-v4.15-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Update stack trace skipping for ORC unwinder ftrace, orc, x86: Handle ftrace dynamically allocated trampolines x86/ftrace: Fix ORC unwinding from ftrace handlers
-
Willy Tarreau authored
We're seeing a raise of automated reports from testing tools and reports about address leaks that are not really exploitable as-is, many of which do not represent an immediate risk justifying to work in closed places. Signed-off-by: Willy Tarreau <w@1wt.eu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Kroah-Hartman authored
This reverts commit 6cfb521a. Turns out distros do not want to make retpoline as part of their "ABI", so this patch should not have been merged. Sorry Andi, this was my fault, I suggested it when your original patch was the "correct" way of doing this instead. Reported-by: Jiri Kosina <jikos@kernel.org> Fixes: 6cfb521a ("module: Add retpoline tag to VERMAGIC") Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: rusty@rustcorp.com.au Cc: arjan.van.de.ven@intel.com Cc: jeyu@kernel.org Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yuval Mintz authored
Driver periodically samples all neighbors configured in device in order to update the kernel regarding their state. When finding an entry configured in HW that doesn't show in neigh_lookup() driver logs an error message. This introduces a race when removing multiple neighbors - it's possible that a given entry would still be configured in HW as its removal is still being processed but is already removed from the kernel's neighbor tables. Simply remove the error message and gracefully accept such events. Fixes: c723c735 ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Fixes: 60f040ca ("mlxsw: spectrum_router: Periodically dump active IPv6 neighbours") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2018-01-24 1) Only offloads SAs after they are fully initialized. Otherwise a NIC may receive packets on a SA we can not yet handle in the stack. From Yossi Kuperman. 2) Fix negative refcount in case of a failing offload. From Aviad Yehezkel. 3) Fix inner IP ptoro version when decapsulating from interaddress family tunnels. From Yossi Kuperman. 4) Use true or false for boolean variables instead of an integer value in xfrm_get_type_offload. From Gustavo A. R. Silva. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Horman authored
with the introduction of commit b0eb57cb, it appears that rq->buf_info is improperly handled. While it is heap allocated when an rx queue is setup, and freed when torn down, an old line of code in vmxnet3_rq_destroy was not properly removed, leading to rq->buf_info[0] being set to NULL prior to its being freed, causing a memory leak, which eventually exhausts the system on repeated create/destroy operations (for example, when the mtu of a vmxnet3 interface is changed frequently. Fix is pretty straight forward, just move the NULL set to after the free. Tested by myself with successful results Applies to net, and should likely be queued for stable, please Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-By: boyang@redhat.com CC: boyang@redhat.com CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: David S. Miller <davem@davemloft.net> Acked-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Commit 513674b5 ("net: reevalulate autoflowlabel setting after sysctl setting") removed the initialisation of ipv6_pinfo::autoflowlabel and added a second flag to indicate whether this field or the net namespace default should be used. The getsockopt() handling for this case was not updated, so it currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is not explicitly enabled. Fix it to return the effective value, whether that has been set at the socket or net namespace level. Fixes: 513674b5 ("net: reevalulate autoflowlabel setting after sysctl ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
In pppoe_sendmsg(), reserving dev->hard_header_len bytes of headroom was probably fine before the introduction of ->needed_headroom in commit f5184d26 ("net: Allow netdevices to specify needed head/tailroom"). But now, virtual devices typically advertise the size of their overhead in dev->needed_headroom, so we must also take it into account in skb_reserve(). Allocation size of skb is also updated to take dev->needed_tailroom into account and replace the arbitrary 32 bytes with the real size of a PPPoE header. This issue was discovered by syzbot, who connected a pppoe socket to a gre device which had dev->header_ops->create == ipgre_header and dev->hard_header_len == 0. Therefore, PPPoE didn't reserve any headroom, and dev_hard_header() crashed when ipgre_header() tried to prepend its header to skb->data. skbuff: skb_under_panic: text:000000001d390b3a len:31 put:24 head:00000000d8ed776f data:000000008150e823 tail:0x7 end:0xc0 dev:gre0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 3670 Comm: syzkaller801466 Not tainted 4.15.0-rc7-next-20180115+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x162/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801d9bd7840 EFLAGS: 00010282 RAX: 0000000000000083 RBX: ffff8801d4f083c0 RCX: 0000000000000000 RDX: 0000000000000083 RSI: 1ffff1003b37ae92 RDI: ffffed003b37aefc RBP: ffff8801d9bd78a8 R08: 1ffff1003b37ae8a R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff86200de0 R13: ffffffff84a981ad R14: 0000000000000018 R15: ffff8801d2d34180 FS: 00000000019c4880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000208bc000 CR3: 00000001d9111001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: skb_under_panic net/core/skbuff.c:114 [inline] skb_push+0xce/0xf0 net/core/skbuff.c:1714 ipgre_header+0x6d/0x4e0 net/ipv4/ip_gre.c:879 dev_hard_header include/linux/netdevice.h:2723 [inline] pppoe_sendmsg+0x58e/0x8b0 drivers/net/ppp/pppoe.c:890 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 sock_write_iter+0x31a/0x5d0 net/socket.c:909 call_write_iter include/linux/fs.h:1775 [inline] do_iter_readv_writev+0x525/0x7f0 fs/read_write.c:653 do_iter_write+0x154/0x540 fs/read_write.c:932 vfs_writev+0x18a/0x340 fs/read_write.c:977 do_writev+0xfc/0x2a0 fs/read_write.c:1012 SYSC_writev fs/read_write.c:1085 [inline] SyS_writev+0x27/0x30 fs/read_write.c:1082 entry_SYSCALL_64_fastpath+0x29/0xa0 Admittedly PPPoE shouldn't be allowed to run on non Ethernet-like interfaces, but reserving space for ->needed_headroom is a more fundamental issue that needs to be addressed first. Same problem exists for __pppoe_xmit(), which also needs to take dev->needed_headroom into account in skb_cow_head(). Fixes: f5184d26 ("net: Allow netdevices to specify needed head/tailroom") Reported-by: syzbot+ed0838d0fa4c4f2b528e20286e6dc63effc7c14d@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Jan, 2018 8 commits
-
-
Steven Rostedt (VMware) authored
With the addition of ORC unwinder and FRAME POINTER unwinder, the stack trace skipping requirements have changed. I went through the tracing stack trace dumps with ORC and with frame pointers and recalculated the proper values. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The function tracer can create a dynamically allocated trampoline that is called by the function mcount or fentry hook that is used to call the function callback that is registered. The problem is that the orc undwinder will bail if it encounters one of these trampolines. This breaks the stack trace of function callbacks, which include the stack tracer and setting the stack trace for individual functions. Since these dynamic trampolines are basically copies of the static ftrace trampolines defined in ftrace_*.S, we do not need to create new orc entries for the dynamic trampolines. Finding the return address on the stack will be identical as the functions that were copied to create the dynamic trampolines. When encountering a ftrace dynamic trampoline, we can just use the orc entry of the ftrace static function that was copied for that trampoline. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Fix AMD regression due to not re-enabling the big window on resume (Christian König)" * tag 'pci-v4.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: Enable AMD 64-bit window on resume
-
Josh Poimboeuf authored
Steven Rostedt discovered that the ftrace stack tracer is broken when it's used with the ORC unwinder. The problem is that objtool is instructed by the Makefile to ignore the ftrace_64.S code, so it doesn't generate any ORC data for it. Fix it by making the asm code objtool-friendly: - Objtool doesn't like the fact that save_mcount_regs pushes RBP at the beginning, but it's never restored (directly, at least). So just skip the original RBP push, which is only needed for frame pointers anyway. - Annotate some functions as normal callable functions with ENTRY/ENDPROC. - Add an empty unwind hint to return_to_handler(). The return address isn't on the stack, so there's nothing ORC can do there. It will just punt in the unlikely case it tries to unwind from that code. With all that fixed, remove the OBJECT_FILES_NON_STANDARD Makefile annotation so objtool can read the file. Link: http://lkml.kernel.org/r/20180123040746.ih4ep3tk4pbjvg7c@trebleReported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix divide by zero in mlx5, from Talut Batheesh. 2) Guard against invalid GSO packets coming from untrusted guests and arriving in qdisc_pkt_len_init(), from Eric Dumazet. 3) Similarly add such protection to the various protocol GSO handlers. From Willem de Bruijn. 4) Fix regression added to IGMP source address checking for IGMPv3 reports, from Felix Feitkau. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tls: Correct length of scatterlist in tls_sw_sendpage be2net: restore properly promisc mode after queues reconfiguration net: igmp: fix source address check for IGMPv3 reports gso: validate gso_type in GSO handlers net: qdisc_pkt_len_init() should be more robust ibmvnic: Allocate and request vpd in init_resources ibmvnic: Revert to previous mtu when unsupported value requested ibmvnic: Modify buffer size and number of queues on failover rds: tcp: compute m_ack_seq as offset from ->write_seq usbnet: silence an unnecessary warning cxgb4: fix endianness for vlan value in cxgb4_tc_flower cxgb4: set filter type to 1 for ETH_P_IPV6 net/mlx5e: Fix fixpoint divide exception in mlx5e_am_stats_compare
-
Gustavo A. R. Silva authored
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Fixes: ffdb5211 ("xfrm: Auto-load xfrm offload modules") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
-
Yossi Kuperman authored
IPSec tunnel mode supports encapsulation of IPv4 over IPv6 and vice-versa. The outer IP header is stripped and the inner IP inherits the original Ethernet header. Tcpdump fails to properly decode the inner packet in case that h_proto is different than the inner IP version. Fix h_proto to reflect the inner IP version. Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
-
Ben Hutchings authored
Commit bdcf0a42 ("kernel: make groups_sort calling a responsibility group_info allocators") appears to break nfsd rootsquash in a pretty major way. It adds a call to groups_sort() inside the loop that copies/squashes gids, which means the valid gids are sorted along with the following garbage. The net result is that the highest numbered valid gids are replaced with any lower-valued garbage gids, possibly including 0. We should sort only once, after filling in all the gids. Fixes: bdcf0a42 ("kernel: make groups_sort calling a responsibility ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 22 Jan, 2018 4 commits
-
-
Martin Brandenburg authored
In orangefs_devreq_read, there is a loop which picks an op off the list of pending ops. If the loop fails to find an op, there is nothing to read, and it returns EAGAIN. If the op has been given up on, the loop is restarted via a goto. The bug is that the variable which the found op is written to is not reinitialized, so if there are no more eligible ops on the list, the code runs again on the already handled op. This is triggered by interrupting a process while the op is being copied to the client-core. It's a fairly small window, but it's there. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Martin Brandenburg authored
set_op_state_purged can delete the op. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Watson authored
The scatterlist is reused by both sendmsg and sendfile. If a sendmsg of smaller number of pages is followed by a sendfile of larger number of pages, the scatterlist may be too short, resulting in a crash in gcm_encrypt. Add sg_unmark_end to make the list the correct length. tls_sw_sendmsg already calls sg_unmark_end correctly when it allocates memory in alloc_sg, or in zerocopy_from_iter. Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Vecera authored
The commit 62219066 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") modified be_update_queues() so the IFACE (HW representation of the netdevice) is destroyed and then re-created. This causes a regression because potential promiscuous mode is not restored properly during be_open() because the driver thinks that the HW has promiscuous mode already enabled. Note that Lancer is not affected by this bug because RX-filter flags are disabled during be_close() for this chipset. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 62219066 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-