Add sample action to the hardware intermediate representation model which
would subsequently allow it to be used by drivers for offload.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Štetiar says:

====================
of_net: Add NVMEM support to of_get_mac_address

this patch series is a continuation of my previous attempt[1], where I've
tried to wire MTD layer into of_get_mac_address, so it would be possible to
load MAC addresses from various NVMEMs as EEPROMs etc.

Predecessor of this patch which used directly MTD layer has originated in
OpenWrt some time ago and supports already about 497 use cases in 357
device tree files.

During the review process of my 1st attempt I was told, that I shouldn't be
using MTD directly, but that I should rather use new NVMEM subsystem and
during the review process of v2 I was told, that I should handle
EPROBE_DEFFER error as well, during the review process of v3 I was told,
that returning pointer/NULL/ERR_PTR is considered as wrong API design, so
this v4 patch series tries to accommodate all this previous remarks.

First patch is wiring NVMEM support directly into of_get_mac_address as
it's obvious, that adding support for NVMEM into every other driver would
mean adding a lot of repetitive code. This patch allows us to configure MAC
addresses in various devices like ethernet and wireless adapters directly
from of_get_mac_address, which is used by quite a lot of drivers in the
tree already.

Second patch is simply updating documentation with NVMEM bits, and cleaning
up all current binding documentation referencing any of the MAC address
related properties.

Third and fourth patches are simply removing duplicate NVMEM code which is
no longer needed as the first patch has wired NVMEM support directly into
of_get_mac_address.

Patches 5-10 are converting all current users of of_get_mac_address to the
new ERR_PTR encoded error value, as of_get_mac_address could now return
valid pointer, NULL and ERR_PTR.

Just for a better picture, this patch series and one simple patch[2] on top
of it, allows me to configure 8Devices Carambola2 board's MAC addresses
with following DTS (simplified):

 &spi {
 	flash@0 {
 		partitions {
			art: partition@ff0000 {
				label = "art";
				reg = <0xff0000 0x010000>;
				read-only;

				nvmem-cells {
					compatible = "nvmem-cells";
					#address-cells = <1>;
					#size-cells = <1>;

					eth0_addr: eth-mac-addr@0 {
						reg = <0x0 0x6>;
					};

					eth1_addr: eth-mac-addr@6 {
						reg = <0x6 0x6>;
					};

					wmac_addr: wifi-mac-addr@1002 {
						reg = <0x1002 0x6>;
					};
				};
			};
		};
	};
 };

 &eth0 {
	nvmem-cells = <&eth0_addr>;
	nvmem-cell-names = "mac-address";
 };

 &eth1 {
	nvmem-cells = <&eth1_addr>;
	nvmem-cell-names = "mac-address";
 };

 &wmac {
	nvmem-cells = <&wmac_addr>;
	nvmem-cell-names = "mac-address";
 };

1. https://patchwork.ozlabs.org/patch/1086628/
2. https://patchwork.ozlabs.org/patch/890738/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There was NVMEM support added to of_get_mac_address, so it could now return
ERR_PTR encoded error values, so we need to adjust all current users of
of_get_mac_address to this new fact.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

There was NVMEM support added to of_get_mac_address, so it could now return
ERR_PTR encoded error values, so we need to adjust all current users of
of_get_mac_address to this new fact.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

There was NVMEM support added to of_get_mac_address, so it could now return
ERR_PTR encoded error values, so we need to adjust all current users of
of_get_mac_address to this new fact.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

There was NVMEM support added to of_get_mac_address, so it could now return
ERR_PTR encoded error values, so we need to adjust all current users of
of_get_mac_address to this new fact.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

There was NVMEM support added to of_get_mac_address, so it could now return
ERR_PTR encoded error values, so we need to adjust all current users of
of_get_mac_address to this new fact.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

There was NVMEM support added directly to of_get_mac_address, and it uses
nvmem_get_mac_address under the hood, so we can remove it. As
of_get_mac_address can now return ERR_PTR encoded error values, adjust to
that as well.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

There was NVMEM support added directly to of_get_mac_address, and it uses
nvmem_get_mac_address under the hood, so we can remove it. As
of_get_mac_address can now return ERR_PTR encoded error values, adjust to
that as well.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

As of_get_mac_address now supports NVMEM under the hood, we need to update
the bindings documentation with the new nvmem-cell* properties, which would
mean copy&pasting a lot of redundant information to every binding
documentation currently referencing some of the MAC address properties.

So I've just removed all the references to the optional MAC address
properties and replaced them with the small note referencing
net/ethernet.txt file.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Many embedded devices have information such as MAC addresses stored
inside NVMEMs like EEPROMs and so on. Currently there are only two
drivers in the tree which benefit from NVMEM bindings.

Adding support for NVMEM into every other driver would mean adding a lot
of repetitive code. This patch allows us to configure MAC addresses in
various devices like ethernet and wireless adapters directly from
of_get_mac_address, which is already used by almost every driver in the
tree.

Predecessor of this patch which used directly MTD layer has originated
in OpenWrt some time ago and supports already about 497 use cases in 357
device tree files.

Cc: Alban Bedel <albeu@free.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Driver updates.

This patch series adds some extended statistics available with the new
firmware interface, package version from firmware, aRFS support on
57500 chips, new PCI IDs, and some miscellaneous fixes and improvements.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

0x1806 and 0x1752 are VF variant and PF variant of the 57500 chip
family.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set RSS ring table index of the RFS destination ring for the NTUPLE
filters on 57500 chips.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Query support for the aRFS ring table index in the firmware.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_need_reserve_rings() determines if any resources have changed and
requires new reservation with firmware.  The NQ checking is currently
just an approximation.  Improve the NQ checking logic to make it
accurate.  NQ reservation is only needed on 57500 PFs.  This fix will
eliminate unnecessary reservations and will reduce NQ reservations
when some NQs have been released on 57500 PFs.

Fixes: c0b8cda0 ("bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In newer firmware, the context memory for MR (Memory Region)
and AH (Address Handle) to support RDMA are specified separately.
Modify driver to specify and allocate the 2 context memory types
separately when supported by the firmware.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently driver hard code Clause 45 based on speed supported by the
PHY. Instead read the clause type from the PHY ID provided as input
to the mdio ioctl.

Fixes: 0ca12be9 ("bnxt_en: Add support for mdio read/write to external PHY")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

HWRM_VER_GET firmware command returns package name that is running
actively on the adapter.  Use this version instead of parsing from
the package log in NVRAM.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Newer firmware now advertises the capability for extended stats
support.  Check the new capability in addition to the existing
version check.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Gather periodic PCIe statistics for ethtool -S.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reverse the condition of the large "if" block and return early.  This
will simplify the follow up patch to add PCIe statistics.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PTP API updates for 57500 chips, new RX port stats counters and other
miscellaneous updates.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2019-05-04

This series contains updates to the ice driver only.

Jesse updated the driver to make more functions consistent in their use
of a local variable for vsi->back.  Updates the driver to use bit fields
when possible to avoid wasting lots of storage space to store single bit
values.  Optimized the driver to be more memory efficient by moving
structure members around that are not in are hot path.

Michal updates the driver to disable the VF if malicious device driver
(MDD) event is detected by the hardware.  Adds checks to validate the
messages coming from the VF driver.  Tightens up the sniffing of the
driver so that transmit traffic so that VF's cannot see what is on other
VSIs.

Tony fixed the driver so that receive stripping state won't change every
time transmit insertion is changed.  Cleanup the __always_unused
attribute, now that the variable is being used.  Fixed the function
which evaluates setting of features to ensure that can evaluate and set
multiple features in a single function call.

Akeem fixes the driver so that we do not attempt to remove a VLAN filter
that does not exist.  Adds support for adding a ethertype based filter
rule on VSI and describe it in a very long run-on sentence. :-)

Bruce cleans up static analysis warnings by removing a local variable
initialization that is not needed.

Brett makes the allocate/deallocate more consistent in all the driver
flows for VSI q_vectors.  In addition, makes setting/getting coalesce
settings more consistent throughout the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2019-05-04

This series contains updates to i40e only.

Grzegorz fixes a bug with promiscuous mode not being kept when the VF
switched to a new VLAN.  Fixed a typo in the link mode code, by using
the correct define.  Fixed truncation issue, which changed an function
argument to a smaller value that should have been a larger value.

Aleksandr adds support for new x710 devices and the speeds they support.

Sergey adds a check for the number of vectors against the number of MSIx
vectors to ensure one does not exceed the other.

Martyna adds additional input validation on VF messages handled by the
PF.  Fixed potential memory leaks in the driver where the error paths
were not freeing allocated memory.

Maciej reverts the double ShadowRAM checksum calculation change because
issues were found in the NVM downgrade situation.

Gustavo Silva changes the i40e driver to use struct_size() in kzalloc()
calls, to avoid type mistakes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

===================
Netfilter updates for net-next

The following batch contains Netfilter updates for net-next, they are:

1) Move nft_expr_clone() to nft_dynset, from Paul Gortmaker.

2) Do not include module.h from net/netfilter/nf_tables.h,
   also from Paul.

3) Restrict conntrack sysctl entries to boolean, from Tonghao Zhang.

4) Several patches to add infrastructure to autoload NAT helper
   modules from their respective conntrack helper, this also includes
   the first client of this code in OVS, patches from Flavio Leitner.

5) Add support to match for conntrack ID, from Brett Mastbergen.

6) Spelling fix in connlabel, from Colin Ian King.

7) Use struct_size() from hashlimit, from Gustavo A. R. Silva.

8) Add optimized version of nf_inet_addr_mask(), from Li RongQing.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>

using 64bit computation to slightly optimize nf_inet_addr_mask
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, replace code of the following form:

sizeof(struct xt_hashlimit_htable) + sizeof(struct hlist_head) * size

with:

struct_size(hinfo, hash, size)

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2019-05-05

Here's one more bluetooth-next pull request for 5.2:

 - Fixed Command Complete event handling check for matching opcode
 - Added support for Qualcomm WCN3998 controller, along with DT bindings
 - Added default address for Broadcom BCM2076B1 controllers

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When testing I figured out that most operations signal finish even
before we trigger the first delay. Seems like PCI(e) access and
memory barriers typically add enough latency. Therefore move the
first delay after the first check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

phy_probe() takes care that all supported modes are advertised,
in addition use phy_support_asym_pause() to advertise pause modes.
This way we don't have to deal with phylib internals directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix sparse warnings:

drivers/net/ethernet/xilinx/ll_temac_main.c:66:5: warning: symbol '_temac_ior_be' was not declared. Should it be static?
drivers/net/ethernet/xilinx/ll_temac_main.c:71:6: warning: symbol '_temac_iow_be' was not declared. Should it be static?
drivers/net/ethernet/xilinx/ll_temac_main.c:76:5: warning: symbol '_temac_ior_le' was not declared. Should it be static?
drivers/net/ethernet/xilinx/ll_temac_main.c:81:6: warning: symbol '_temac_iow_le' was not declared. Should it be static?
drivers/net/ethernet/xilinx/ll_temac_main.c:648:6: warning: symbol 'ptr_to_txbd' was not declared. Should it be static?
drivers/net/ethernet/xilinx/ll_temac_main.c:654:6: warning: symbol 'ptr_from_txbd' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix sparse warning:

drivers/net/ethernet/aquantia/atlantic/aq_main.c:26:12:
 warning: symbol 'aq_ndev_driver_name' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix sparse warning:

drivers/net/netdevsim/bus.c:253:5: warning:
 symbol 'nsim_num_vf' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c: In function 'mvpp2_cls_c2_build_match':
drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c:1159:28: warning:
 variable 'act' set but not used [-Wunused-but-set-variable]

It is never used since introduction in
commit 90b509b3 ("net: mvpp2: cls: Add Classification offload support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace skb->xmit_more usage by netdev_xmit_more().

Fixes: 4f296ede ("drivers: net: aurora: use netdev_xmit_more helper")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
net: extend indirect calls helper usage

This series applies the indirect calls helper introduced with commit
283c16a2 ("indirect call wrappers: helpers to speed-up indirect
calls of builtin") to more hooks inside the network stack.

Overall this avoids up to 4 indirect calls for each RX packets,
giving small but measurable gain TCP_RR workloads and 5% under UDP
flood.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This avoids an indirect call per {send,recv}msg syscall in
the common (IPv6 or IPv4 socket) case.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

So that we avoid another indirect call per RX packet, if
early demux is enabled.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

So that we avoid another indirect call per RX packet in the common
case.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>