- 05 Aug, 2024 17 commits
-
-
Jimmy Assarsson authored
For usbcan devices (M16C), add struct usbcan_cmd_tx_acknowledge for Tx ACK commands and struct usbcan_cmd_clk_overflow_event for clock overflow event commands. Signed-off-by:
Jimmy Assarsson <extja@kvaser.com> Reviewed-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20240701154936.92633-11-extja@kvaser.comSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Jimmy Assarsson authored
Add hardware timestamp support to leaf based devices (M32C and leafimx). Signed-off-by:
-
Jimmy Assarsson authored
Rename local variable skb to err_skb. Signed-off-by:
-
Jimmy Assarsson authored
can: kvaser_usb: leaf: Replace kvaser_usb_leaf_m32c_dev_cfg with kvaser_usb_leaf_m32c_dev_cfg_{16,24,32}mhz Add new struct kvaser_usb_dev_cfg constants, kvaser_usb_leaf_m32c_dev_cfg_{16,24,32}mhz, for M32C based leaf devices. Note that the bittiming parameters are always calculated for 16MHz clock, while the timestamps are in the actual clock frequency of the device. Signed-off-by: -
Jimmy Assarsson authored
Assign correct timestamp_freq to kvaser_usb_leaf_imx_dev_cfg_{16,24,32}mhz. Since the driver didn't utilize the value, this didn't cause any problems. Signed-off-by: -
Jimmy Assarsson authored
Add, struct leaf_cmd_tx_acknowledge, for Tx ACK commands received from leaf devices (M32C and leafimx28). Signed-off-by:
-
Jimmy Assarsson authored
Set hardware timestamp on transmitted packets. Signed-off-by:
-
Jimmy Assarsson authored
Add, struct kvaser_cmd_tx_ack, for standard Tx ACK commands. Expand kvaser_usb_hydra_ktime_from_cmd() to extract timestamps from both standard and extended Tx ACK commands. Unsupported commands are silently ignored, and 0 is returned. Signed-off-by:
-
Jimmy Assarsson authored
Rename function, since this function will be used for more than just the rx commands. Signed-off-by:
-
Jimmy Assarsson authored
Add helper function kvaser_usb_ticks_to_ktime() that converts from device ticks to ktime. And kvaser_usb_timestamp{48,64}_to_ktime() that converts from device 48-bit or 64-bit timestamp, to ktime. Signed-off-by: -
Marc Kleine-Budde authored
Stefan Mätje <stefan.maetje@esd.eu> says: The goal of this patch series is to do some cleanup and also add the support for the one-shot mode before the next patch introduces CAN-FD support for this driver. Link: https://lore.kernel.org/all/20240717214409.3934333-1-stefan.maetje@esd.euSigned-off-by:
-
Stefan Mätje authored
This patch adds support for one-shot mode. In this mode there happens no automatic retransmission in the case of an arbitration lost error or on any bus error. Signed-off-by:
Stefan Mätje <stefan.maetje@esd.eu> Link: https://lore.kernel.org/all/20240717214409.3934333-3-stefan.maetje@esd.euSigned-off-by:
-
Stefan Mätje authored
Rename macros to use for esdACC CTRL register access to match the internal documentation and to make the macro prefix consistent. - ACC_CORE_OF_CTRL_MODE -> ACC_CORE_OF_CTRL Makes the name match the documentation. - ACC_REG_CONTROL_MASK_MODE_ -> ACC_REG_CTRL_MASK_ ACC_REG_CONTROL_MASK_ -> ACC_REG_CTRL_MASK_ Makes the prefix consistent for macros describing masks in the same register (CTRL). Signed-off-by:
-
Marc Kleine-Budde authored
The flexcan in iMX95 is not compatible with imx93 because wakeup method is difference. Link: https://lore.kernel.org/all/20240731-flexcan-v4-0-82ece66e5a76@nxp.comSigned-off-by:
-
Haibo Chen authored
iMX95 defines a bit in GPR that sets/unsets the IPG_STOP signal to the FlexCAN module, controlling its entry into STOP mode. Wakeup should work even if FlexCAN is in STOP mode. Due to iMX95 architecture design, the A-Core cannot access GPR; only the system manager (SM) can configure GPR. To support the wakeup feature, follow these steps: - For suspend: 1) During Linux suspend, when CAN suspends, do nothing for GPR and keep CAN-related clocks on. 2) In ATF, check whether CAN needs to support wakeup; if yes, send a request to SM through the SCMI protocol. 3) In SM, configure the GPR and unset IPG_STOP. 4) A-Core suspends. - For wakeup and resume: 1) A-Core wakeup event arrives. 2) In SM, deassert IPG_STOP. 3) Linux resumes. Add a new fsl_imx95_devtype_data and FLEXCAN_QUIRK_SETUP_STOP_MODE_SCMI to reflect this. Reviewed-by:Han Xu <han.xu@nxp.com> Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Reviewed-by:
Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/all/20240731-flexcan-v4-2-82ece66e5a76@nxp.comSigned-off-by:
-
Haibo Chen authored
The flexcan in iMX95 is not compatible with imx93 because wakeup method is difference. Make fsl,imx95-flexcan not fallback to fsl,imx93-flexcan. Reviewed-by:
Rob Herring (Arm) <robh@kernel.org> Signed-off-by:
-
Frank Li authored
Add common 'can-transceiver' children node for fsl,flexcan. Fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: can@2180000: 'can-transceiver' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#Signed-off-by:
-
- 04 Aug, 2024 3 commits
-
-
David S. Miller authored
Lorenzo Bianconi says: ==================== Add second QDMA support for EN7581 eth controller EN7581 SoC supports two independent QDMA controllers to connect the Ethernet Frame Engine (FE) to the CPU. Introduce support for the second QDMA controller. This is a preliminary series to support multiple FE ports (e.g. connected to a second PHY controller). Changes since v1: - squash patch 6/9 and 7/9 - move some duplicated code from patch 2/9 in 1/9 - cosmetics ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Introduce support for the DSA built-in switch available on the EN7581 development board. EN7581 support is similar to MT7988 one except it requires to set MT7530_FORCE_MODE bit in MT753X_PMCR_P register for on cpu port. Tested-by:
Benjamin Larsson <benjamin.larsson@genexis.eu> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
-
Lorenzo Bianconi authored
Add documentation for the built-in switch which can be found in the Airoha EN7581 SoC. Signed-off-by:
-
- 03 Aug, 2024 12 commits
-
-
David S. Miller authored
Kuniyuki Iwashima says: ==================== net: Random cleanup for netns initialisation. patch 1 & 2 suppress unwanted memory allocation for net->gen->ptr[]. patch 3 ~ 6 move part of netns initialisation to prenet_init() that do not require pernet_ops_rwsem. v2: patch 1 : Removed Fixes: tag patch 2 : Use XOR for WARN_ON() v1: https://lore.kernel.org/netdev/20240729210801.16196-1-kuniyu@amazon.com/ ==================== Signed-off-by:
-
Kuniyuki Iwashima authored
Commit 7c3f1875 ("net: move somaxconn init from sysctl code") introduced net_defaults_ops to make sure that net.core sysctl knobs are always initialised even if CONFIG_SYSCTL is disabled. Such operations better fit preinit_net() added for a similar purpose by commit 6e77a5a4 ("net: initialize net->notrefcnt_tracker earlier"). Let's initialise the sysctl defaults in preinit_net(). Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Kuniyuki Iwashima authored
Most initialisations in setup_net() do not require pernet_ops_rwsem and can be moved to preinit_net(). Signed-off-by:
-
Kuniyuki Iwashima authored
When initialising the root netns, we call preinit_net() under pernet_ops_rwsem. However, the operations in preinit_net() do not require pernet_ops_rwsem. Also, we don't hold it for preinit_net() when initialising non-root netns. To be consistent, let's call preinit_net() without pernet_ops_rwsem in net_ns_init(). Signed-off-by:
-
Kuniyuki Iwashima authored
When initialising the root netns, we set net->passive in setup_net(). However, we do it twice for non-root netns in copy_net_ns() and setup_net(). This is because we could bypass setup_net() in copy_net_ns() if down_read_killable() fails. preinit_net() is a better place to put such an operation. Let's initialise net->passive in preinit_net(). Signed-off-by:
-
Kuniyuki Iwashima authored
We can allocate per-netns memory for struct pernet_operations by specifying id and size. register_pernet_operations() assigns an id to pernet_operations and later ops_init() allocates the specified size of memory as net->gen->ptr[id]. If id is missing, no memory is allocated. If size is not specified, pernet_operations just wastes an entry of net->gen->ptr[] for every netns. net_generic is available only when both id and size are specified, so let's ensure that. While we are at it, we add const to both fields. Signed-off-by:
-
Kuniyuki Iwashima authored
Commit fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") converted net->gen->ptr[pppol2tp_net_id] in l2tp_ppp.c to net->gen->ptr[l2tp_net_id] in l2tp_core.c. Now the leftover wastes one entry of net->gen->ptr[] in each netns. Let's avoid the unwanted allocation. Signed-off-by:
Simon Horman <horms@kernel.org> Reviewed-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Kyle Swenson authored
The DEVID register contains two pieces of information: the device ID in the upper nibble, and the silicon revision number in the lower nibble. The driver should work fine with any silicon revision, so let's mask that out in the device ID check. Fixes: 20e6d190 ("net: pse-pd: Add TI TPS23881 PSE controller driver") Signed-off-by:
Kyle Swenson <kyle.swenson@est.tech> Reviewed-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Pawel Dembicki authored
According to the datasheet, the VSC73xx family's maximum internal MDIO bus speed is 20 MHz. It also allows disabling the preamble. This commit sets the MDIO clock prescaler to the minimum value and disables the preamble to speed up MDIO operations. It doesn't affect the external bus because it's configured in a different subblock. Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240731203455.580262-1-paweldembicki@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Yue Haibing authored
commit 3cec055c ("rxrpc: Don't hold a ref for connection workqueue") left behind rxrpc_put_client_conn(). And commit 248f219c ("rxrpc: Rewrite the data and ack handling code") removed rxrpc_accept_incoming_calls() but left declaration. Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Reviewed-by:
-
Dmitry Antipov authored
According to '__reuseport_alloc()', annotate flexible array member 'sock' of 'struct sock_reuseport' with '__counted_by()' and use convenient 'struct_size()' to simplify the math used in 'kzalloc()'. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
-
Simon Horman authored
Smatch reports that copying media_name and if_name to name_parts may overwrite the destination. .../bearer.c:166 bearer_name_validate() error: strcpy() 'media_name' too large for 'name_parts->media_name' (32 vs 16) .../bearer.c:167 bearer_name_validate() error: strcpy() 'if_name' too large for 'name_parts->if_name' (1010102 vs 16) This does seem to be the case so guard against this possibility by using strscpy() and failing if truncation occurs. Introduced by commit b97bf3fd ("[TIPC] Initial merge") Compile tested only. Reviewed-by:
-
- 02 Aug, 2024 8 commits
-
-
Jakub Kicinski authored
Nick Child says: ==================== ibmveth RR performance This patchset aims to increase the ibmveth drivers small packet request response rate. These 2 patches address: 1. NAPI rescheduling technique 2. Driver-side processing of small packets Testing over several netperf tcp_rr connections, we saw a 30% increase in transactions per second. No regressions were observed in other workloads. ==================== Link: https://patch.msgid.link/20240801211215.128101-1-nnac123@linux.ibm.comSigned-off-by:
-
Nick Child authored
When the length of a packet is under the rx_copybreak threshold, the buffer is copied into a new skb and sent up the stack. This allows the dma mapped memory to be recycled back to FW. Previously, the reuse of the DMA space was handled immediately. This means that further packet processing has to wait until h_add_logical_lan finishes for this packet. Therefore, when reusing a packet, offload the hcall to the replenish function. As a result, much of the shared logic between the recycle and replenish functions can be removed. This change increases TCP_RR packet rate by another 15% (370k to 430k txns). We can see the ftrace data supports this: PREV: ibmveth_poll = 8078553.0 us / 190999.0 hits = AVG 42.3 us NEW: ibmveth_poll = 7632787.0 us / 224060.0 hits = AVG 34.07 us Signed-off-by:
Nick Child <nnac123@linux.ibm.com> Reviewed-by:
Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20240801211215.128101-3-nnac123@linux.ibm.comSigned-off-by:
-
Nick Child authored
When the ibmveth driver processes less than the budget, it must call napi_complete_done() to release the instance. This function will return false if the driver should avoid rearming interrupts. Previously, the driver was ignoring the return code of napi_complete_done(). As a result, there were unnecessary calls to enable the veth irq. Therefore, use the return code napi_complete_done() to determine if irq rearm is necessary. Additionally, in the event that new data is received immediately after rearming interrupts, rather than just rescheduling napi, also jump back to the poll processing loop since we are already in the poll function (and know that we did not expense all of budget). This slight tweak results in a 15% increase in TCP_RR transaction rate (320k to 370k txns). We can see the ftrace data supports this: PREV: ibmveth_poll = 8818014.0 us / 182802.0 hits = AVG 48.24 NEW: ibmveth_poll = 8082398.0 us / 191413.0 hits = AVG 42.22 Signed-off-by:
-
Simon Horman authored
linkmode_andnot() simply returns the result of bitmap_andnot(). And the return type of bitmap_andnot() is bool. So it makes sense for the return type of linkmode_andnot() to also be bool. I checked all call-sites and they either ignore the return value or treat it as a bool. Compile tested only. Link: https://lore.kernel.org/netdev/68088998-4486-4930-90a4-96a32f08c490@lunn.ch/Signed-off-by:
-
Jakub Kicinski authored
Lorenzo Bianconi says: ==================== Add second QDMA support for EN7581 eth controller EN7581 SoC supports two independent QDMA controllers to connect the Ethernet Frame Engine (FE) to the CPU. Introduce support for the second QDMA controller. This is a preliminary series to support multiple FE ports (e.g. connected to a second PHY controller). ==================== Link: https://patch.msgid.link/cover.1722522582.git.lorenzo@kernel.orgSigned-off-by:
-
Lorenzo Bianconi authored
Link the running gdm port to the qdma controller used to connect with the CPU. Moreover, load all QDMA controllers available on EN7581 SoC. Signed-off-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to support multi-QDMA controllers. Signed-off-by:
-
Lorenzo Bianconi authored
Map MMIO regions of both qdma controllers available on EN7581 SoC. Run airoha_hw_cleanup routine for both QDMA controllers available on EN7581 SoC removing airoha_eth module or in airoha_probe error path. This is a preliminary patch to support multi-QDMA controllers. Signed-off-by:
-
