1. 10 Jul, 2015 2 commits
  2. 09 Jul, 2015 13 commits
    • David S. Miller's avatar
      Merge branch 'pktgen-races' · fc5778ca
      David S. Miller authored
      Oleg Nesterov says:
      
      ====================
      net: pktgen: fix race between pktgen_thread_worker() and kthread_stop()
      
      I am not familiar with this code and I have no idea how to test
      these changes, so 2/2 comes as a separate change. 1/2 looks like
      the obvious bugfix, and probably candidate for -stable.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fc5778ca
    • Oleg Nesterov's avatar
      net: pktgen: kill the "Wait for kthread_stop" code in pktgen_thread_worker() · 1fbe4b46
      Oleg Nesterov authored
      pktgen_thread_worker() doesn't need to wait for kthread_stop(), it
      can simply exit. Just pktgen_create_thread() and pg_net_exit() should
      do get_task_struct()/put_task_struct(). kthread_stop(dead_thread) is
      fine.
      Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1fbe4b46
    • Oleg Nesterov's avatar
      net: pktgen: fix race between pktgen_thread_worker() and kthread_stop() · fecdf8be
      Oleg Nesterov authored
      pktgen_thread_worker() is obviously racy, kthread_stop() can come
      between the kthread_should_stop() check and set_current_state().
      Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
      Reported-by: default avatarJan Stancek <jstancek@redhat.com>
      Reported-by: default avatarMarcelo Leitner <mleitner@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fecdf8be
    • Enrico Mioso's avatar
      cdc_ncm: Add support for moving NDP to end of NCM frame · 4a0e3e98
      Enrico Mioso authored
      NCM specs are not actually mandating a specific position in the frame for
      the NDP (Network Datagram Pointer). However, some Huawei devices will
      ignore our aggregates if it is not placed after the datagrams it points
      to. Add support for doing just this, in a per-device configurable way.
      While at it, update NCM subdrivers, disabling this functionality in all of
      them, except in huawei_cdc_ncm where it is enabled instead.
      We aren't making any distinction between different Huawei NCM devices,
      based on what the vendor driver does. Standard NCM devices are left
      unaffected: if they are compliant, they should be always usable, still
      stay on the safe side.
      
      This change has been tested and working with a Huawei E3131 device (which
      works regardless of NDP position), a Huawei E3531 (also working both
      ways) and an E3372 (which mandates NDP to be after indexed datagrams).
      
      V1->V2:
      - corrected wrong NDP acronym definition
      - fixed possible NULL pointer dereference
      - patch cleanup
      V2->V3:
      - Properly account for the NDP size when writing new packets to SKB
      Signed-off-by: default avatarEnrico Mioso <mrkiko.rs@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4a0e3e98
    • Mugunthan V N's avatar
      drivers: net: cpsw: fix disabling of tx interrupt in rx isr · 5a0266af
      Mugunthan V N authored
      In commit 'c03abd84 ("net: ethernet: cpsw: don't requests
      IRQs we don't use")', common isr is split into tx and rx, but
      in rx isr tx interrupt is also disabledi in cpsw_disable_irq().
      So tx interrupts are not handled during rx interrupts and rx
      napi completion and results in poor tx performance by 40Mbps.
      Fixing by disabling only rx interrupt in rx isr.
      
      Cc: Felipe Balbi <balbi@ti.com>
      Cc: <stable@vger.kernel.org> # v4.0+
      Signed-off-by: default avatarMugunthan V N <mugunthanvnm@ti.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5a0266af
    • Vaishali Thakkar's avatar
      net: systemport: Use eth_hw_addr_random · adb35050
      Vaishali Thakkar authored
      Use eth_hw_addr_random() instead of calling random_ether_addr().
      Here, this change is setting addr_assign_type to NET_ADDR_RANDOM.
      
      The Coccinelle semantic patch that performs this transformation
      is as follows:
      
      @@
      identifier a,b;
      @@
      
      -random_ether_addr(a->b);
      +eth_hw_addr_random(a);
      Signed-off-by: default avatarVaishali Thakkar <vthakkar1994@gmail.com>
      Tested-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      adb35050
    • Johannes Thumshirn's avatar
      macvtap: Destroy minor_idr on module_exit · d5de1987
      Johannes Thumshirn authored
      Destroy minor_idr on module_exit, reclaiming the allocated memory.
      
      This was detected by the following semantic patch (written by Luis Rodriguez
      <mcgrof@suse.com>)
      <SmPL>
      @ defines_module_init @
      declarer name module_init, module_exit;
      declarer name DEFINE_IDR;
      identifier init;
      @@
      
      module_init(init);
      
      @ defines_module_exit @
      identifier exit;
      @@
      
      module_exit(exit);
      
      @ declares_idr depends on defines_module_init && defines_module_exit @
      identifier idr;
      @@
      
      DEFINE_IDR(idr);
      
      @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @
      identifier declares_idr.idr, defines_module_exit.exit;
      @@
      
      exit(void)
      {
       ...
       idr_destroy(&idr);
       ...
      }
      
      @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @
      identifier declares_idr.idr, defines_module_exit.exit;
      @@
      
      exit(void)
      {
       ...
       +idr_destroy(&idr);
      }
      </SmPL>
      Signed-off-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d5de1987
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · ace15bbb
      David S. Miller authored
      Pablo Neira Ayuso says:
      
      ====================
      Netfilter fixes for net
      
      The following patchset contains Netfilter fixes for your net tree. This batch
      mostly comes with patches to address fallout from the previous merge window
      cycle, they are:
      
      1) Use entry->state.hook_list from nf_queue() instead of the global nf_hooks
         which is not valid when used from NFPROTO_NETDEV, this should cause no
         problems though since we have no userspace queueing for that family, but
         let's fix this now for the sake of correctness. Patch from Eric W. Biederman.
      
      2) Fix compilation breakage in bridge netfilter if CONFIG_NF_DEFRAG_IPV4 is not
         set, from Bernhard Thaler.
      
      3) Use percpu jumpstack in arptables too, now that there's a single copy of the
         rule blob we can't store the return address there anymore. Patch from
         Florian Westphal.
      
      4) Fix a skb leak in the xmit path of bridge netfilter, problem there since
         2.6.37 although it should be not possible to hit invalid traffic there, also
         from Florian.
      
      5) Eric Leblond reports that when loading a large ruleset with many missing
         modules after a fresh boot, nf_tables can take long time commit it. Fix this
         by processing the full batch until the end, even on missing modules, then
         abort only once and restart processing.
      
      6) Add bridge netfilter files to the MAINTAINER files.
      
      7) Fix a net_device refcount leak in the new IPV6 bridge netfilter code, from
         Julien Grall.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ace15bbb
    • Peter Dunning's avatar
      sfc: Report TX completions to BQL after all TX events in interrupt · c936835c
      Peter Dunning authored
      The limit for BQL is updated each time we call
      netdev_tx_completed_queue.
      Without this patch the BQL limit was updated for every TX event we
      see.
      The issue was that this only updated the limit to handle the data
      we complete in two events as the first event wouldn't show that
      enough traffic had been processed between them.
      
      This was OK when interrupt moderation was off but not when it was
      on as more data had to be completed in a single interrupt.
      
      The patch changes this so that we do report the completion to BQL
      only when all the TX events in the interrupt have been processed.
      Signed-off-by: default avatarShradha Shah <sshah@solarflare.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c936835c
    • Zheng Liu's avatar
      drivers/net/usb: add device id for NVIDIA Tegra USB 3.0 Ethernet · d065c3c1
      Zheng Liu authored
      This device is sold as 'NVIDIA Tegra USB 3.0 Ethernet'.
      Chipset is RTL8153 and works with r8152.
      Signed-off-by: default avatarZheng Liu <zhliu@nvidia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d065c3c1
    • Denys Vlasenko's avatar
      3c59x: Fix shared IRQ handling · 4eed4d8f
      Denys Vlasenko authored
      As its first order of business, boomerang_interrupt() checks whether
      the device really has any pending interrupts. If it does not,
      it does nothing and returns, but it still returns IRQ_HANDLED.
      
      This is wrong: interrupt was not handled, IRQ handlers of other
      devices sharing this IRQ line need to be called.
      
      vortex_interrupt() has it right: it returns IRQ_NONE in this case
      via IRQ_RETVAL(0).
      
      Do the same in boomerang_interrupt().
      Signed-off-by: default avatarDenys Vlasenko <dvlasenk@redhat.com>
      CC: David S. Miller <davem@davemloft.net>
      CC: linux-kernel@vger.kernel.org
      CC: netdev@vger.kernel.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4eed4d8f
    • Neil Horman's avatar
      vmxnet3: prevent receive getting out of sequence on napi poll · 0769636c
      Neil Horman authored
      vmxnet3's current napi path is built to count every rx descriptor we recieve,
      and use that as a count of the napi budget.  That means its possible to return
      from a napi poll halfway through recieving a fragmented packet accross multiple
      dma descriptors.  If that happens, the next napi poll will start with the
      descriptor ring in an improper state (e.g. the first descriptor we look at may
      have the end-of-packet bit set), which will cause a BUG halt in the driver.
      
      Fix the issue by only counting whole received packets in the napi poll and
      returning that value, rather than the descriptor count.
      
      Tested by the reporter and myself, successfully
      Signed-off-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      CC: Shreyas Bhatewara <sbhatewara@vmware.com>
      CC: "David S. Miller" <davem@davemloft.net>
      Acked-by: default avatarAndy Gospodarek <gospo@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0769636c
    • Andy Gospodarek's avatar
      ipv4: add support for linkdown sysctl to netconf · 974d7af5
      Andy Gospodarek authored
      This kernel patch exports the value of the new
      ignore_routes_with_linkdown via netconf.
      
      v2: changes to notify userspace via netlink when sysctl values change
      and proposed for 'net' since this could be considered a bugfix
      Signed-off-by: default avatarAndy Gospodarek <gospo@cumulusnetworks.com>
      Suggested-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
      Acked-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      974d7af5
  3. 08 Jul, 2015 22 commits
    • Shradha Shah's avatar
      sfc: Ensure down_write(&filter_sem) and up_write() are matched before calling efx_net_open() · 671b53ee
      Shradha Shah authored
      This patch avoids the double up_write to filter_sem if
      efx_net_open() fails.
      
      Resolves: 2d432f20Signed-off-by: default avatarShradha Shah <sshah@solarflare.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      671b53ee
    • Nikolay Aleksandrov's avatar
      bridge: mdb: zero out the local br_ip variable before use · f1158b74
      Nikolay Aleksandrov authored
      Since commit b0e9a30d ("bridge: Add vlan id to multicast groups")
      there's a check in br_ip_equal() for a matching vlan id, but the mdb
      functions were not modified to use (or at least zero it) so when an
      entry was added it would have a garbage vlan id (from the local br_ip
      variable in __br_mdb_add/del) and this would prevent it from being
      matched and also deleted. So zero out the whole local ip var to protect
      ourselves from future changes and also to fix the current bug, since
      there's no vlan id support in the mdb uapi - use always vlan id 0.
      Example before patch:
      root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
      root@debian:~# bridge mdb
      dev br0 port eth1 grp 239.0.0.1 permanent
      root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent
      RTNETLINK answers: Invalid argument
      
      After patch:
      root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
      root@debian:~# bridge mdb
      dev br0 port eth1 grp 239.0.0.1 permanent
      root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent
      root@debian:~# bridge mdb
      Signed-off-by: default avatarNikolay Aleksandrov <razor@blackwall.org>
      Fixes: b0e9a30d ("bridge: Add vlan id to multicast groups")
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f1158b74
    • Mugunthan V N's avatar
      drivers: net: cpsw: fix crash while accessing second slave ethernet interface · 1973db0d
      Mugunthan V N authored
      When cpsw's number of slave is set to 1 in device tree and while
      accessing second slave ndev and priv in cpsw_tx_interrupt(),
      there is a kernel crash. This is due to cpsw_get_slave_priv()
      not verifying number of slaves while retriving netdev priv and
      returns a invalid memory region. Fixing the issue by introducing
      number of slave check in cpsw_get_slave_priv() and
      cpsw_get_slave_ndev().
      
      [   15.879589] Unable to handle kernel paging request at virtual address 0f0e142c
      [   15.888540] pgd = ed374000
      [   15.891359] [0f0e142c] *pgd=00000000
      [   15.895105] Internal error: Oops: 5 [#1] SMP ARM
      [   15.899936] Modules linked in:
      [   15.903139] CPU: 0 PID: 593 Comm: udhcpc Tainted: G        W       4.1.0-12205-gfda8b18c-dirty #10
      [   15.912386] Hardware name: Generic AM43 (Flattened Device Tree)
      [   15.918557] task: ed2a2e00 ti: ed3fe000 task.ti: ed3fe000
      [   15.924187] PC is at cpsw_tx_interrupt+0x30/0x44
      [   15.929008] LR is at _raw_spin_unlock_irqrestore+0x40/0x44
      [   15.934726] pc : [<c048b9cc>]    lr : [<c05ef4f4>]    psr: 20000193
      [   15.934726] sp : ed3ffc08  ip : ed2a2e40  fp : 00000000
      [   15.946685] r10: c0969ce8  r9 : c0969cfc  r8 : 00000000
      [   15.952129] r7 : 000000c6  r6 : ee54ab00  r5 : ee169c64  r4 : ee534e00
      [   15.958932] r3 : 0f0e0d0c  r2 : 00000000  r1 : ed3ffbc0  r0 : 00000001
      [   15.965735] Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
      [   15.973261] Control: 10c5387d  Table: ad374059  DAC: 00000015
      [   15.979246] Process udhcpc (pid: 593, stack limit = 0xed3fe218)
      [   15.985414] Stack: (0xed3ffc08 to 0xed400000)
      [   15.989954] fc00:                   ee54ab00 c009928c c0a9e648 60000193 000032e4 ee169c00
      [   15.998478] fc20: ee169c64 ee169c00 ee169c64 ee54ab00 00000001 00000001 ee67e268 ee008800
      [   16.006995] fc40: ee534800 c009946c ee169c00 ee169c64 c08bd660 c009c370 c009c2a4 000000c6
      [   16.015513] fc60: c08b75c4 c08b0854 00000000 c0098b3c 000000c6 c0098c50 ed3ffcb0 0000003a
      [   16.024033] fc80: ed3ffcb0 fa24010c c08b7800 fa240100 ee7e9880 c00094c4 c05ef4e8 60000013
      [   16.032556] fca0: ffffffff ed3ffce4 ee7e9880 c05ef964 00000001 ed2a33d8 00000000 ed2a2e00
      [   16.041080] fcc0: 60000013 ee536bf8 60000013 ee51b800 ee7e9880 ee67e268 ee7e9880 ee534800
      [   16.049603] fce0: c0ad0768 ed3ffcf8 c008e910 c05ef4e8 60000013 ffffffff 00000001 00000001
      [   16.058121] fd00: ee536bf8 c0487a04 00000000 00000000 ee534800 00000000 00000156 c048c990
      [   16.066645] fd20: 00000000 00000000 c0969f40 00000000 00000000 c05000e8 00000001 00000000
      [   16.075167] fd40: 00000000 c051eefc 00000000 ee67e268 00000000 00000000 ee51b800 ed3ffd9c
      [   16.083690] fd60: 00000000 ee67e200 ee51b800 ee7e9880 ee67e268 00000000 00000000 ee67e200
      [   16.092211] fd80: ee51b800 ee7e9880 ee67e268 ee534800 ee67e200 c051eedc ee67e268 00000010
      [   16.100727] fda0: 00000000 00000000 ee7e9880 ee534800 00000000 ee67e268 ee51b800 c05006fc
      [   16.109247] fdc0: ee67e268 00000001 c0500488 00000156 ee7e9880 00000000 ed3fe000 fffffff4
      [   16.117771] fde0: ed3fff1c ee7e9880 ee534800 00000148 00000000 ed1f8340 00000000 00000000
      [   16.126289] fe00: 00000000 c05a9054 00000000 00000000 00000156 c0ab62a8 00000010 ed3e7000
      [   16.134812] fe20: 00000000 00000008 edcfb700 ed3fff1c c0fb5f94 ed2a2e00 c0fb5f64 000005d8
      [   16.143336] fe40: c0a9b3b8 00000000 ed3e7070 00000000 00000000 00000000 00009f40 00000000
      [   16.151858] fe60: 00000000 00020022 00110008 00000000 00000000 43004400 00000000 ffffffff
      [   16.160374] fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
      [   16.168898] fea0: edcfb700 bee5f380 00000014 00000000 ed3fe000 00000000 00004400 c04e2b64
      [   16.177415] fec0: 00000002 c04e3b00 ed3ffeec 00000001 0000011a 00000000 00000000 bee5f394
      [   16.185937] fee0: 00000148 ed3fff10 00000014 00000001 00000000 00000000 ed3ffee4 00000000
      [   16.194459] ff00: 00000000 00000000 00000000 c04e3664 00080011 00000002 06000000 ffffffff
      [   16.202980] ff20: 0000ffff ffffffff 0000ffff c008dd54 ee5a6f08 ee636e80 c096972d c0089c14
      [   16.211499] ff40: 00000000 60000013 ee5a6f40 60000013 00000000 ee5a6f40 00000002 00000006
      [   16.220023] ff60: 00000000 edcfb700 00000001 ed2a2e00 c000f60c 00000001 0000011a c008ea34
      [   16.228540] ff80: 00000006 00000000 bee5f380 00000014 bee5f380 00000014 bee5f380 00000122
      [   16.237059] ffa0: c000f7c4 c000f5e0 bee5f380 00000014 00000006 bee5f394 00000148 00000000
      [   16.245581] ffc0: bee5f380 00000014 bee5f380 00000122 fffffd6e 00004300 00004800 00004400
      [   16.254104] ffe0: bee5f378 bee5f36c 000307ec b6f39044 40000010 00000006 ed36fa40 00000000
      [   16.262642] [<c048b9cc>] (cpsw_tx_interrupt) from [<c009928c>] (handle_irq_event_percpu+0x64/0x204)
      [   16.272076] [<c009928c>] (handle_irq_event_percpu) from [<c009946c>] (handle_irq_event+0x40/0x64)
      [   16.281330] [<c009946c>] (handle_irq_event) from [<c009c370>] (handle_fasteoi_irq+0xcc/0x1a8)
      [   16.290220] [<c009c370>] (handle_fasteoi_irq) from [<c0098b3c>] (generic_handle_irq+0x20/0x30)
      [   16.299197] [<c0098b3c>] (generic_handle_irq) from [<c0098c50>] (__handle_domain_irq+0x64/0xdc)
      [   16.308273] [<c0098c50>] (__handle_domain_irq) from [<c00094c4>] (gic_handle_irq+0x20/0x60)
      [   16.316987] [<c00094c4>] (gic_handle_irq) from [<c05ef964>] (__irq_svc+0x44/0x5c)
      [   16.324779] Exception stack(0xed3ffcb0 to 0xed3ffcf8)
      [   16.330044] fca0:                                     00000001 ed2a33d8 00000000 ed2a2e00
      [   16.338567] fcc0: 60000013 ee536bf8 60000013 ee51b800 ee7e9880 ee67e268 ee7e9880 ee534800
      [   16.347090] fce0: c0ad0768 ed3ffcf8 c008e910 c05ef4e8 60000013 ffffffff
      [   16.353987] [<c05ef964>] (__irq_svc) from [<c05ef4e8>] (_raw_spin_unlock_irqrestore+0x34/0x44)
      [   16.362973] [<c05ef4e8>] (_raw_spin_unlock_irqrestore) from [<c0487a04>] (cpdma_check_free_tx_desc+0x60/0x6c)
      [   16.373311] [<c0487a04>] (cpdma_check_free_tx_desc) from [<c048c990>] (cpsw_ndo_start_xmit+0xb4/0x1ac)
      [   16.383017] [<c048c990>] (cpsw_ndo_start_xmit) from [<c05000e8>] (dev_hard_start_xmit+0x2a4/0x4c0)
      [   16.392364] [<c05000e8>] (dev_hard_start_xmit) from [<c051eedc>] (sch_direct_xmit+0xf4/0x210)
      [   16.401246] [<c051eedc>] (sch_direct_xmit) from [<c05006fc>] (__dev_queue_xmit+0x2ac/0x7bc)
      [   16.409960] [<c05006fc>] (__dev_queue_xmit) from [<c05a9054>] (packet_sendmsg+0xc68/0xeb4)
      [   16.418585] [<c05a9054>] (packet_sendmsg) from [<c04e2b64>] (sock_sendmsg+0x14/0x24)
      [   16.426663] [<c04e2b64>] (sock_sendmsg) from [<c04e3b00>] (SyS_sendto+0xb4/0xe0)
      [   16.434377] [<c04e3b00>] (SyS_sendto) from [<c000f5e0>] (ret_fast_syscall+0x0/0x54)
      [   16.442360] Code: e5943118 e593303c e3530000 0a000002 (e5930720)
      [   16.448716] ---[ end trace a68159f094d85ba6 ]---
      [   16.453526] Kernel panic - not syncing: Fatal exception in interrupt
      [   16.460149] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
      Signed-off-by: default avatarMugunthan V N <mugunthanvnm@ti.com>
      Cc: <stable@vger.kernel.org> # v3.8+
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1973db0d
    • Stephen Smalley's avatar
      net/tipc: initialize security state for new connection socket · fdd75ea8
      Stephen Smalley authored
      Calling connect() with an AF_TIPC socket would trigger a series
      of error messages from SELinux along the lines of:
      SELinux: Invalid class 0
      type=AVC msg=audit(1434126658.487:34500): avc:  denied  { <unprintable> }
        for pid=292 comm="kworker/u16:5" scontext=system_u:system_r:kernel_t:s0
        tcontext=system_u:object_r:unlabeled_t:s0 tclass=<unprintable>
        permissive=0
      
      This was due to a failure to initialize the security state of the new
      connection sock by the tipc code, leaving it with junk in the security
      class field and an unlabeled secid.  Add a call to security_sk_clone()
      to inherit the security state from the parent socket.
      Reported-by: default avatarTim Shearer <tim.shearer@overturenetworks.com>
      Signed-off-by: default avatarStephen Smalley <sds@tycho.nsa.gov>
      Acked-by: default avatarPaul Moore <paul@paul-moore.com>
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fdd75ea8
    • David S. Miller's avatar
      Merge branch 'sfc-set-mac' · 4df48e8c
      David S. Miller authored
      Shradha Shah says:
      
      ====================
      sfc: compat for lack of VADAPTOR_SET_MAC in adaptor_firmware <= 4.1.1.1023
      
      This patch series resolves an incompatibility with legacy
      firmware due to the lack of MC_CMD_VADAPTOR_SET_MAC in
      adaptor_firmware <= 4.1.1.1023
      
      Unless this patch series is applied there will be a compatibility
      issue between the driver and Solarflare adapters running older
      firmware.
      
      Tested with and without CONFIG_SFC_SRIOV
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4df48e8c
    • Daniel Pieczko's avatar
    • Daniel Pieczko's avatar
      sfc: add legacy method for changing a PF's MAC address · 7a186f47
      Daniel Pieczko authored
      Some versions of MCFW do not support the MC_CMD_VADAPTOR_SET_MAC
      command, and ENOSYS will be returned.
      
      If the PF created its own vport, the function's datapath must be
      stopped and the vport can be reconfigured to reflect the new MAC
      address.
      
      If the MCFW created the vport for the PF (which is the case when
      the nic_data->vport_mac is blank), nothing further needs to be
      done as the vport is not under the control of the PF.
      
      This only applies to PFs because the MCFW in question does not
      support VFs.
      Signed-off-by: default avatarShradha Shah <sshah@solarflare.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7a186f47
    • Daniel Pieczko's avatar
      sfc: refactor code in efx_ef10_set_mac_address() · 9e9f665a
      Daniel Pieczko authored
      Re-organize the structure of error handling to avoid having
      to duplicate the netif_err() around the ifdefs.
      
      The only change to the behaviour of the error-handling is that
      the PF's data structure to record VF details should only be
      updated if the original command succeeded.
      Signed-off-by: default avatarShradha Shah <sshah@solarflare.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9e9f665a
    • Mazhar Rana's avatar
      bonding: "primary_reselect" with "failure" is not working properly · b5a983f3
      Mazhar Rana authored
      When "primary_reselect" is set to "failure", primary interface should
      not become active until current active slave is down. But if we set first
      member of bond device as a "primary" interface and "primary_reselect"
      is set to "failure" then whenever primary interface's link get back(up)
      it become active slave even if current active slave is still up.
      
      With this patch, "bond_find_best_slave" will not traverse members if
      primary interface is not candidate for failover/reselection and current
      active slave is still up.
      Signed-off-by: default avatarMazhar Rana <mazhar.rana@cyberoam.com>
      Signed-off-by: default avatarJay Vosburgh <j.vosburgh@gmail.com>
      Signed-off-by: default avatarJay Vosburgh <jay.vosburgh@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b5a983f3
    • Timo Teräs's avatar
      ip_tunnel: fix ipv4 pmtu check to honor inner ip header df · fc24f2b2
      Timo Teräs authored
      Frag needed should be sent only if the inner header asked
      to not fragment. Currently fragmentation is broken if the
      tunnel has df set, but df was not asked in the original
      packet. The tunnel's df needs to be still checked to update
      internally the pmtu cache.
      
      Commit 23a3647b broke it, and this commit fixes
      the ipv4 df check back to the way it was.
      
      Fixes: 23a3647b ("ip_tunnels: Use skb-len to PMTU check.")
      Cc: Pravin B Shelar <pshelar@nicira.com>
      Signed-off-by: default avatarTimo Teräs <timo.teras@iki.fi>
      Acked-by: default avatarPravin B Shelar <pshelar@nicira.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fc24f2b2
    • Daniel Borkmann's avatar
      rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver · 4f7d2cdf
      Daniel Borkmann authored
      Jason Gunthorpe reported that since commit c02db8c6 ("rtnetlink: make
      SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes
      anymore with respect to their policy, that is, ifla_vfinfo_policy[].
      
      Before, they were part of ifla_policy[], but they have been nested since
      placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO,
      which is another nested attribute for the actual VF attributes such as
      IFLA_VF_MAC, IFLA_VF_VLAN, etc.
      
      Despite the policy being split out from ifla_policy[] in this commit,
      it's never applied anywhere. nla_for_each_nested() only does basic nla_ok()
      testing for struct nlattr, but it doesn't know about the data context and
      their requirements.
      
      Fix, on top of Jason's initial work, does 1) parsing of the attributes
      with the right policy, and 2) using the resulting parsed attribute table
      from 1) instead of the nla_for_each_nested() loop (just like we used to
      do when still part of ifla_policy[]).
      
      Reference: http://thread.gmane.org/gmane.linux.network/368913
      Fixes: c02db8c6 ("rtnetlink: make SR-IOV VF interface symmetric")
      Reported-by: default avatarJason Gunthorpe <jgunthorpe@obsidianresearch.com>
      Cc: Chris Wright <chrisw@sous-sol.org>
      Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
      Cc: Greg Rose <gregory.v.rose@intel.com>
      Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
      Cc: Rony Efraim <ronye@mellanox.com>
      Cc: Vlad Zolotarov <vladz@cloudius-systems.com>
      Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
      Cc: Thomas Graf <tgraf@suug.ch>
      Signed-off-by: default avatarJason Gunthorpe <jgunthorpe@obsidianresearch.com>
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarVlad Zolotarov <vladz@cloudius-systems.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4f7d2cdf
    • Andrew Lunn's avatar
      net: fec: Ensure clocks are enabled while using mdio bus · 6c3e921b
      Andrew Lunn authored
      When a switch is attached to the mdio bus, the mdio bus can be used
      while the interface is not open. If the IPG clock is not enabled, MDIO
      reads/writes will simply time out.
      
      Add support for runtime PM to control this clock. Enable/disable this
      clock using runtime PM, with open()/close() and mdio read()/write()
      function triggering runtime PM operations. Since PM is optional, the
      IPG clock is enabled at probe and is no longer modified by
      fec_enet_clk_enable(), thus if PM is not enabled in the kernel, it is
      guaranteed the clock is running when MDIO operations are performed.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Acked-by: default avatarFugang Duan <B38611@freescale.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6c3e921b
    • Lendacky, Thomas's avatar
      amd-xgbe: Fix DMA API debug warning · cfbfd86b
      Lendacky, Thomas authored
      When running a kernel configured with CONFIG_DMA_API_DEBUG=y a warning
      is issued:
        DMA-API: device driver tries to sync DMA memory it has not allocated
      
      This warning is the result of mapping the full range of the Rx buffer
      pages allocated and then performing a dma_sync_single_for_cpu against
      a calculated DMA address. The proper thing to do is to use the
      dma_sync_single_range_for_cpu with a base DMA address and an offset.
      Reported-by: default avatarKim Phillips <kim.phillips@arm.com>
      Signed-off-by: default avatarTom Lendacky <thomas.lendacky@amd.com>
      Tested-by: default avatarKim Phillips <kim.phillips@arm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cfbfd86b
    • Nicolas Dichtel's avatar
      Revert "dev: set iflink to 0 for virtual interfaces" · 95ec655b
      Nicolas Dichtel authored
      This reverts commit e1622baf.
      
      The side effect of this commit is to add a '@NONE' after each virtual
      interface name with a 'ip link'. It may break existing scripts.
      Reported-by: default avatarOlivier Hartkopp <socketcan@hartkopp.net>
      Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
      Tested-by: default avatarOliver Hartkopp <socketcan@hartkopp.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      95ec655b
    • Eric Dumazet's avatar
      net: graceful exit from netif_alloc_netdev_queues() · d339727c
      Eric Dumazet authored
      User space can crash kernel with
      
      ip link add ifb10 numtxqueues 100000 type ifb
      
      We must replace a BUG_ON() by proper test and return -EINVAL for
      crazy values.
      
      Fixes: 60877a32 ("net: allow large number of tx queues")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d339727c
    • Phil Sutter's avatar
      rhashtable: fix for resize events during table walk · 142b942a
      Phil Sutter authored
      If rhashtable_walk_next detects a resize operation in progress, it jumps
      to the new table and continues walking that one. But it misses to drop
      the reference to it's current item, leading it to continue traversing
      the new table's bucket in which the current item is sorted into, and
      after reaching that bucket's end continues traversing the new table's
      second bucket instead of the first one, thereby potentially missing
      items.
      
      This fixes the rhashtable runtime test for me. Bug probably introduced
      by Herbert Xu's patch eddee5ba ("rhashtable: Fix walker behaviour during
      rehash") although not explicitly tested.
      
      Fixes: eddee5ba ("rhashtable: Fix walker behaviour during rehash")
      Signed-off-by: default avatarPhil Sutter <phil@nwl.cc>
      Acked-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      142b942a
    • Satish Ashok's avatar
      bridge: mdb: start delete timer for temp static entries · f7e2965d
      Satish Ashok authored
      Start the delete timer when adding temp static entries so they can expire.
      Signed-off-by: default avatarSatish Ashok <sashok@cumulusnetworks.com>
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Fixes: ccb1c31a ("bridge: add flags to distinguish permanent mdb entires")
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f7e2965d
    • Rob Herring's avatar
      net: phy: add dependency on HAS_IOMEM to MDIO_BUS_MUX_MMIOREG · cfa52005
      Rob Herring authored
      On UML builds, mdio-mux-mmioreg.c fails to compile:
      
      drivers/net/phy/mdio-mux-mmioreg.c:50:3: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration]
      drivers/net/phy/mdio-mux-mmioreg.c:63:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
      
      This is due to CONFIG_OF now being user selectable. Add a dependency on
      HAS_IOMEM to fix this.
      Signed-off-by: default avatarRob Herring <robh@kernel.org>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Cc: David S. Miller <davem@davemloft.net>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cfa52005
    • Ralf Baechle's avatar
      NET: hamradio: Fix IP over bpq encapsulation. · aa43c5ff
      Ralf Baechle authored
      Since 1d5da757 (ax25: Stop using magic
      neighbour cache operations.) any attempt to transmit IP packets over
      a bpqether device will result in a message like "Dead loop on virtual
      device bpq0, fix it urgently!"
      
      Fix suggested by Eric W. Biederman <ebiederm@xmission.com>.
      Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Cc: <stable@vger.kernel.org> # 4.1
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      aa43c5ff
    • Eric Dumazet's avatar
      net_sched: gen_estimator: extend pps limit · 32f675bb
      Eric Dumazet authored
      rate estimators are limited to 4 Mpps, which was fine years ago, but
      too small with current hardware generation.
      
      Lets use 2^5 scaling instead of 2^10 to get 128 Mpps new limit.
      
      On 64bit arch, use an "unsigned long" for temp storage and remove limit.
      (We do not expect 32bit arches to be able to reach this point)
      
      Tested:
      
      tc -s -d filter sh dev eth0 parent ffff:
      
      filter protocol ip pref 1 u32
      filter protocol ip pref 1 u32 fh 800: ht divisor 1
      filter protocol ip pref 1 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:15
        match 07000000/ff000000 at 12
      	action order 1: gact action drop
      	 random type none pass val 0
      	 index 1 ref 1 bind 1 installed 166 sec
       	Action statistics:
      	Sent 39734251496 bytes 863788076 pkt (dropped 863788117, overlimits 0 requeues 0)
      	rate 4067Mbit 11053596pps backlog 0b 0p requeues 0
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Acked-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      32f675bb
    • Julien Grall's avatar
      netfilter: bridge: Use __in6_dev_get rather than in6_dev_get in br_validate_ipv6 · 86e89718
      Julien Grall authored
      The commit efb6de9b "netfilter: bridge:
      forward IPv6 fragmented packets" introduced a new function
      br_validate_ipv6 which take a reference on the inet6 device. Although,
      the reference is not released at the end.
      
      This will result to the impossibility to destroy any netdevice using
      ipv6 and bridge.
      
      It's possible to directly retrieve the inet6 device without taking a
      reference as all netfilter hooks are protected by rcu_read_lock via
      nf_hook_slow.
      
      Spotted while trying to destroy a Xen guest on the upstream Linux:
      "unregister_netdevice: waiting for vif1.0 to become free. Usage count = 1"
      Signed-off-by: default avatarJulien Grall <julien.grall@citrix.com>
      Cc: Bernhard Thaler <bernhard.thaler@wvnet.at>
      Cc: Pablo Neira Ayuso <pablo@netfilter.org>
      Cc: fw@strlen.de
      Cc: ian.campbell@citrix.com
      Cc: wei.liu2@citrix.com
      Cc: Bob Liu <bob.liu@oracle.com>
      Acked-by: default avatarStephen Hemminger <stephen@networkplumber.org>
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      86e89718
    • Pablo Neira Ayuso's avatar
      MAINTAINER: add bridge netfilter · 91c269a0
      Pablo Neira Ayuso authored
      So scripts/get_maintainer.pl shows the Netfilter mailing lists.
      Reported-by: default avatarJulien Grall <julien.grall@citrix.com>
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      91c269a0
  4. 03 Jul, 2015 3 commits