Add AX_MEDIUM_ENCK also when speed = 10/100Mbps. This allows my belkin
f5d5055 to work with my 100Mbps switch and with an old 10Mbps ISA card.
Without this patch, the card is recognized and the interface is brought
up fine, but no packets actually flow through the interface.
Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com>
Acked-by: David Hollis <dhollis@davehollis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When mv643xx_eth allocates skbuffs, it adds
'dma_get_cache_alignment() - 1' to the length it needs, so that it can
align the skb's ->data pointer to a cache boundary.  When checking
whether a transmitted skbuff can be reused as a receive buffer, these
bytes needs to be included into the minimum bound for the recycle check.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update to change of mii_bus interface and fix some warning.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

    inet_sk_rebuild_header() does a new route lookup if the dst_entry
    associated with a socket becomes stale. However inet_sk_rebuild_header()
    didn't use struct flowi->flags, causing the route lookup to
    fail for foreign-bound IP_TRANSPARENT sockets, causing an error
    state to be set for the sockets in question.
Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

    udp_sendmsg() didn't fill struct flowi->flags, which means that
    the route lookup would fail for non-local IPs even if the
    IP_TRANSPARENT sockopt was set.

    This prevents sendto() to work properly for UDP sockets, whereas
    bind(foreign-ip) + connect() + send() worked fine.
Signed-off-by: Balazs Scheidler <bazsi@balabit.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxfd->frag_info is a __le64, IPG_RFI_FRAGLEN is a cpu-endian
constant and wants to be outside of the le64_to_cpu. Fixed
in multiple places.

Also an occurrence where le64_to_cpu was used instead of cpu_to_le64
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A previous patch, 51e2a384, made
genphy_config_aneg() not restart aneg by calling genphy_restart_aneg() if
the advertisement hadn't changed.

But, genphy_restart_aneg() doesn't just restart aneg, it may also *enable*
aneg or un-isolate the PHY from the MII (those functions are controlled by
the same register).  The code to avoid calling genphy_restart_aneg() didn't
consider this.

So, modify genphy_config_aneg() to also check if the PHY needs to have aneg
enabled or be un-isolated before deciding not to restart aneg.

This caused a problem with certain Davicom PHYs, as that driver isolates
the PHY (why?) before calling genphy_config_aneg() and expects the PHY to
be un-isolated by that function.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Reported-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is the minimal patch to fix endian mismatches.  These are
probably bugs on big-endian arches, noops on little endian.

jme_rxsum_ok could be improved to directly take a __le16 and
change all of the masks/sets to be in little-endian, but
has not been done here to keep the patch small.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All MDIO bus drivers currently name bus with "%x" format.
There is one exception where mv643xx_eth driver is using "%d".
Phy address on the bus uses format "%02x".

Fixing phy name example to match all real life MDIO drivers.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: David S. Miller <davem@davemloft.net>

Several device drivers try to do things like netif_carrier_off()
before register_netdev() is invoked.  This is bogus, but too many
drivers do this to fix them all up in one go.
Reported-by: Folkert van Heusden <folkert@vanheusden.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

  CC [M]  net/phonet/af_phonet.o
net/phonet/af_phonet.c: In function `pn_socket_create':
net/phonet/af_phonet.c:38: sorry, unimplemented: inlining failed in call to 'phonet_proto_put': function body not available
net/phonet/af_phonet.c:99: sorry, unimplemented: called from here
make[3]: *** [net/phonet/af_phonet.o] Error 1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

  CC [M]  drivers/net/ixgbe/ixgbe_main.o
drivers/net/ixgbe/ixgbe_main.c: In function `ixgbe_intr':
drivers/net/ixgbe/ixgbe_main.c:1290: sorry, unimplemented: inlining failed in call to 'ixgbe_irq_enable': function body not available
drivers/net/ixgbe/ixgbe_main.c:1312: sorry, unimplemented: called from here
make[4]: *** [drivers/net/ixgbe/ixgbe_main.o] Error 1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As number of TX queues in unrelated to number of CPU's we remove this test
and just make sure nxtq never gets exceeded.
Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similarly to IPv6 ip6_mr_init() (fixed last week), the order of cleanup
operations in the error/exit section of ip_mr_init() is completely 
inversed. It should be the other way around.
Also a del_timer() is missing in the error path.

I should have guessed last week that this same error existed in ipmr.c
too, as ip6mr.c is largely inspired by ipmr.c.
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: hold extra reference to bio in blk_rq_map_user_iov()
  relay: fix cpu offline problem
  Release old elevator on change elevator
  block: fix boot failure with CONFIG_DEBUG_BLOCK_EXT_DEVT=y and nash
  block/md: fix md autodetection
  block: make add_partition() return pointer to hd_struct
  block: fix add_partition() error path

By using WARN(), kerneloops.org can collect which component is causing
the delay and make statistics about that. suspend_test_finish() is
currently the number 2 item but unless we can collect who's causing
it we're not going to be able to fix the hot topic ones..
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  kernel/profile.c: fix section mismatch warning
  function tracing: fix wrong pos computing when read buffer has been fulfilled
  tracing: fix mmiotrace resizing crash
  ring-buffer: no preempt for sched_clock()
  ring-buffer: buffer record on/off switch

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  cpuset: fix regression when failed to generate sched domains
  sched, signals: fix the racy usage of ->signal in account_group_xxx/run_posix_cpu_timers
  sched: fix kernel warning on /proc/sched_debug access
  sched: correct sched-rt-group.txt pathname in init/Kconfig

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  swiotlb: use coherent_dma_mask in alloc_coherent
  MAINTAINERS: remove me as RAID maintainer

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: fix a broken define in dma-mapping
  Blackfin arch: fix bug - Turn on DEBUG_DOUBLEFAULT, booting SMP kernel crash
  Blackfin arch: fix bug - shared lib function in L2 failed be called
  Blackfin arch: fix incorrect limit check for bf54x check_gpio
  Blackfin arch: fix bug - Cpufreq assumes clocks in kHz and not Hz.
  Blackfin arch: dont warn when running a kernel on the oldest supported silicon
  Blackfin arch: fix bug - kernel build with write back policy fails to be booted up
  Blackfin arch: fix bug - dmacopy test case fail on all platform
  Blackfin arch: Fix typo when adding CONFIG_DEBUG_VERBOSE
  Blackfin arch: don't copy bss when copying L1
  Blackfin arch: fix bug - Fail to boot jffs2 kernel for BF561 with SMP patch
  Blackfin arch: handle case of d_path() returning error in decode_address()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix resume of GPIO unsol event for STAC/IDT
  ALSA: hda - Add quirks for HP Pavilion DV models
  ALSA: hda - Fix GPIO initialization in patch_stac92hd71bxx()
  ALSA: hda - Check model type instead of SSID in patch_92hd71bxx()
  ALSA: sound/pci/pcxhr/pcxhr.c: introduce missing kfree and pci_disable_device
  ALSA: hda: STAC_VREF_EVENT value change
  ALSA: hda - Missing NULL check in hda_beep.c
  ALSA: hda - Add digital beep playback switch for STAC/IDT codecs

If the size passed in is OK but we end up mapping too many segments,
we call the unmap path directly like from IO completion. But from IO
completion we have an extra reference to the bio, so this error case
goes OOPS when it attempts to free and already free bio.

Fix it by getting an extra reference to the bio before calling the
unmap failure case.
Reported-by: Petr Vandrovec <vandrove@vc.cvut.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

relay_open() will close allocated buffers when failed.
but if cpu offlined, some buffer will not be closed.
this patch fixed it.

and did cleanup for relay_reset() too.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

We should release old elevator when change to use a new one.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

We run into system boot failure with kernel 2.6.28-rc. We found it on a
couple of machines, including T61 notebook, nehalem machine, and another
HPC NX6325 notebook.  All the machines use FedoraCore 8 or FedoraCore 9.
With kernel prior to 2.6.28-rc, system boot doesn't fail.

I debug it and locate the root cause. Pls. see
http://bugzilla.kernel.org/show_bug.cgi?id=11899
https://bugzilla.redhat.com/show_bug.cgi?id=471517

As a matter of fact, there are 2 bugs.

1)root=/dev/sda1, system boot randomly fails. Mostly, boot for 5 times
and fails once. nash has a bug. Some of its functions misuse return
value 0.  Sometimes, 0 means timeout and no uevent available. Sometimes,
0 means nash gets an uevent, but the uevent isn't block-related (for
exmaple, usb). If by coincidence, kernel tells nash that uevents are
available, but kernel also set timeout, nash might stops collecting
other uevents in queue if current uevent isn't block-related.  I work
out a patch for nash to fix it.
http://bugzilla.kernel.org/attachment.cgi?id=18858

2) root=LABEL=/, system always can't boot. initrd init reports
switchroot fails. Here is an executation branch of nash when booting:
    (1) nash read /sys/block/sda/dev; Assume major is 8 (on my desktop)
    (2) nash query /proc/devices with the major number; It found line
	"8 sd";
    (3) nash use 'sd' to search its own probe table to find device (DISK)
	type for the device and add it to its own list;
    (4) Later on, it probes all devices in its list to get filesystem
	labels; scsi register "8 sd" always.

When major is 259, nash fails to find the device(DISK) type. I enables
CONFIG_DEBUG_BLOCK_EXT_DEVT=y when compiling kernel, so 259 is picked up
for device /dev/sda1, which causes nash to fail to find device (DISK)
type.

To fixing issue 2), I create a patch for nash and another patch for
kernel.

http://bugzilla.kernel.org/attachment.cgi?id=18859
http://bugzilla.kernel.org/attachment.cgi?id=18837

Below is the patch for kernel 2.6.28-rc4. It registers blkext, a new
block device in proc/devices.

With 2 patches on nash and 1 patch on kernel, I boot my machines for
dozens of times without failure.

Signed-off-by Zhang Yanmin <yanmin.zhang@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Block ext devt conversion missed md_autodetect_dev() call in
rescan_partitions() leaving md autodetect unable to see partitions.
Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Make add_partition() return pointer to the new hd_struct on success
and ERR_PTR() value on failure.  This change will be used to fix md
autodetection bug.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Partition stats structure was not freed on devt allocation failure
path.  Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Use cached write for setting the GPIO unsolicited event mask to be
restored properly at resume.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added the quirk entries for HP Pavilion DV5 and DV7 with model=hp-m4.

Reference: Novell bnc#445321, bnc#445161
	https://bugzilla.novell.com/show_bug.cgi?id=445321
	https://bugzilla.novell.com/show_bug.cgi?id=445161Signed-off-by: Takashi Iwai <tiwai@suse.de>

dma_mapping_error is an actual function, so fix broken define with a
real inline stub
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

Fixed the GPIO mask and co initialization in patch_stac92hd71bxx()
so that the gpio_maks for HP_M4 model is set properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Impact: fix section mismatch warning in kernel/profile.c

Here, profile_nop function has been called from a non-init function
create_hash_tables(void). Which generetes a section mismatch warning.
Previously, create_hash_tables(void) was a init function. So, removing
__init from create_hash_tables(void) requires profile_nop to be
non-init.

This patch makes profile_nop function inline and fixes the
following warning:

 WARNING: vmlinux.o(.text+0x6ebb6): Section mismatch in reference from
 the function create_hash_tables() to the function
 .init.text:profile_nop()
 The function create_hash_tables() references
 the function __init profile_nop().
 This is often because create_hash_tables lacks a __init
 annotation or the annotation of profile_nop is wrong.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: properly rebuild sched-domains on kmalloc() failure

When cpuset failed to generate sched domains due to kmalloc()
failure, the scheduler should fallback to the single partition
'fallback_doms' and rebuild sched domains, but now it only
destroys but not rebuilds sched domains.

The regression was introduced by:

| commit dfb512ec
| Author: Max Krasnyansky <maxk@qualcomm.com>
| Date:   Fri Aug 29 13:11:41 2008 -0700
|
|    sched: arch_reinit_sched_domains() must destroy domains to force rebuild

After the above commit, partition_sched_domains(0, NULL, NULL) will
only destroy sched domains and partition_sched_domains(1, NULL, NULL)
will create the default sched domain.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  prevent cifs_writepages() from skipping unwritten pages
  Fixed parsing of mount options when doing DFS submount
  [CIFS] Fix check for tcon seal setting and fix oops on failed mount from earlier patch
  [CIFS] Fix build break
  cifs: reinstate sharing of tree connections
  [CIFS] minor cleanup to cifs_mount
  cifs: reinstate sharing of SMB sessions sans races
  cifs: disable sharing session and tcon and add new TCP sharing code
  [CIFS] clean up server protocol handling
  [CIFS] remove unused list, add new cifs sock list to prepare for mount/umount fix
  [CIFS] Fix cifs reconnection flags
  [CIFS] Can't rely on iov length and base when kernel_recvmsg returns error

Fixes a data corruption under heavy stress in which pages could be left
dirty after all open instances of a inode have been closed.

In order to write contiguous pages whenever possible, cifs_writepages()
asks pagevec_lookup_tag() for more pages than it may write at one time.
Normally, it then resets index just past the last page written before calling
pagevec_lookup_tag() again.

If cifs_writepages() can't write the first page returned, it wasn't resetting
index, and the next call to pagevec_lookup_tag() resulted in skipping all of
the pages it previously returned, even though cifs_writepages() did nothing
with them.  This can result in data loss when the file descriptor is about
to be closed.

This patch ensures that index gets set back to the next returned page so
that none get skipped.
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: Shirish S Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Since these hit the same routines, and are relatively small, it is easier to review
them as one patch.

Fixed incorrect handling of the last option in some cases
Fixed prefixpath handling convert path_consumed into host depended string length (in bytes)
Use non default separator if it is provided in the original mount options
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>