- 16 Jan, 2020 13 commits
-
-
Anand Lodnoor authored
Disable WRITE_SAME (no_write_same) for Virtual Disks only. For System PDs and EPDs (Enhanced PDs), WRITE_SAME need not be disabled by default. Link: https://lore.kernel.org/r/1579000882-20246-3-git-send-email-anand.lodnoor@broadcom.comSigned-off-by:
Anand Lodnoor <anand.lodnoor@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Anand Lodnoor authored
After device resume we expect the firmware to be in READY state. Transition to READY might fail due to unhandled exceptions, such as an internal error or a hardware failure. Retry initiating chip reset and wait for the controller to come to ready state. Link: https://lore.kernel.org/r/1579000882-20246-2-git-send-email-anand.lodnoor@broadcom.comSigned-off-by:
Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by:
-
Thomas Bogendoerfer authored
Do firmware download with 64bit LOAD_RAM command, if driver is using 64bit addressing. Link: https://lore.kernel.org/r/20200114160936.1517-1-tbogendoerfer@suse.deSigned-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
-
Gabriel Krisman Bertazi authored
If the transport cannot be registered, the session/connection creation needs to be failed early to let the initiator know. Otherwise, the system will have an outstanding connection that cannot be used nor removed by open-iscsi. The result is similar to the error below, triggered by injecting a failure in the transport's registration path. openiscsi reports success: root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -l Logging in to [iface: default, target: iqn:lun1, portal: 127.0.0.1,3260] Login to [iface: default, target: iqn:lun1, portal:127.0.0.1,3260] successful. But cannot remove the session afterwards, since the kernel is in an inconsistent state. root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -u iscsiadm: No matching sessions found Link: https://lore.kernel.org/r/20200106185817.640331-4-krisman@collabora.comSigned-off-by:
Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by:
-
Gabriel Krisman Bertazi authored
The transport registration may fail. Make sure the errors are propagated to the callers. Link: https://lore.kernel.org/r/20200106185817.640331-3-krisman@collabora.comReviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Gabriel Krisman Bertazi authored
attribute_container_device_trigger invokes callbacks that may fail for one or more classdevs, for instance, the transport_add_class_device callback, called during transport creation, does memory allocation. This information, though, is not propagated to upper layers, and any driver using the attribute_container_device_trigger API will not know whether any, some, or all callbacks succeeded. This patch implements a safe version of this dispatcher, to either succeed all the callbacks or revert to the original state. Link: https://lore.kernel.org/r/20200106185817.640331-2-krisman@collabora.comReviewed-by:
-
Nick Black authored
A faulty userspace that calls destroy_session() before destroying the connections can trigger the failure. This patch prevents the issue by refusing to destroy the session if there are outstanding connections. ------------[ cut here ]------------ kernel BUG at mm/slub.c:306! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 1224 Comm: iscsid Not tainted 5.4.0-rc2.iscsi+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:__slab_free+0x181/0x350 [...] [ 1209.686056] RSP: 0018:ffffa93d4074fae0 EFLAGS: 00010246 [ 1209.686694] RAX: ffff934efa5ad800 RBX: 000000008010000a RCX: ffff934efa5ad800 [ 1209.687651] RDX: ffff934efa5ad800 RSI: ffffeb4041e96b00 RDI: ffff934efd402c40 [ 1209.688582] RBP: ffffa93d4074fb80 R08: 0000000000000001 R09: ffffffffbb5dfa26 [ 1209.689425] R10: ffff934efa5ad800 R11: 0000000000000001 R12: ffffeb4041e96b00 [ 1209.690285] R13: ffff934efa5ad800 R14: ffff934efd402c40 R15: 0000000000000000 [ 1209.691213] FS: 00007f7945dfb540(0000) GS:ffff934efda80000(0000) knlGS:0000000000000000 [ 1209.692316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1209.693013] CR2: 000055877fd3da80 CR3: 0000000077384000 CR4: 00000000000006e0 [ 1209.693897] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1209.694773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1209.695631] Call Trace: [ 1209.695957] ? __wake_up_common_lock+0x8a/0xc0 [ 1209.696712] iscsi_pool_free+0x26/0x40 [ 1209.697263] iscsi_session_teardown+0x2f/0xf0 [ 1209.698117] iscsi_sw_tcp_session_destroy+0x45/0x60 [ 1209.698831] iscsi_if_rx+0xd88/0x14e0 [ 1209.699370] netlink_unicast+0x16f/0x200 [ 1209.699932] netlink_sendmsg+0x21a/0x3e0 [ 1209.700446] sock_sendmsg+0x4f/0x60 [ 1209.700902] ___sys_sendmsg+0x2ae/0x320 [ 1209.701451] ? cp_new_stat+0x150/0x180 [ 1209.701922] __sys_sendmsg+0x59/0xa0 [ 1209.702357] do_syscall_64+0x52/0x160 [ 1209.702812] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1209.703419] RIP: 0033:0x7f7946433914 [...] [ 1209.706084] RSP: 002b:00007fffb99f2378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1209.706994] RAX: ffffffffffffffda RBX: 000055bc869eac20 RCX: 00007f7946433914 [ 1209.708082] RDX: 0000000000000000 RSI: 00007fffb99f2390 RDI: 0000000000000005 [ 1209.709120] RBP: 00007fffb99f2390 R08: 000055bc84fe9320 R09: 00007fffb99f1f07 [ 1209.710110] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000038 [ 1209.711085] R13: 000055bc8502306e R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace a2d933ede7f730d8 ]--- Link: https://lore.kernel.org/r/20191226203148.2172200-1-krisman@collabora.comSigned-off-by:
Nick Black <nlb@google.com> Co-developed-by:
Salman Qazi <sqazi@google.com> Signed-off-by:
Junho Ryu <jayr@google.com> Signed-off-by:
Khazhismel Kumykov <khazhy@google.com> Signed-off-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
-
Stanley Chu authored
Add vendor-specific variant callback "apply_dev_quirks" to MediaTek UFS driver. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1578726707-6596-3-git-send-email-stanley.chu@mediatek.comReviewed-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
Stanley Chu authored
Pass UFS device information to vendor-specific variant callback "apply_dev_quirks" because some platform vendors need to know such information to apply special handling or quirks in specific devices. At the same time, modify existing vendor implementations according to the new interface for those vendor drivers which will be built-in or built as a module alone with UFS core driver. [mkp: clarified commit desc] Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1578726707-6596-2-git-send-email-stanley.chu@mediatek.comReviewed-by:
-
Colin Ian King authored
Currently the incorrect %X print format specifier is being used for several unsigned longs. Fix these by using %lX instead. Also join up some literal strings that are split. Link: https://lore.kernel.org/r/20200108193800.96706-1-colin.king@canonical.com Addresses-Coverity: ("Invalid type in argument to printf format specifier") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Khalid Aziz <khalid@gonehiking.org> Signed-off-by:
-
Stanley Chu authored
Remove "errors" word in output string by ufshcd_print_err_hist() since not all printed targets are "errors". Sometimes they are just "events". In addition, all events which can be treated as "errors" already have "err" or "fail" words in their names. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1578147968-30938-4-git-send-email-stanley.chu@mediatek.comReviewed-by:
-
Stanley Chu authored
Device reset history shall be also added for vendor's device reset variant operation implementation. Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1578147968-30938-3-git-send-email-stanley.chu@mediatek.comReviewed-by:
Asutosh Das <asutoshd@codeaurora.org> Signed-off-by:
-
Stanley Chu authored
Currently checking if an error history element is empty or not is by its "value". In most cases, value is error code. However this checking is not correct because some errors or events do not specify any values in error history so values remain as 0, and this will lead to incorrect empty checking. Fix it by checking "timestamp" instead of "value" because timestamp will be always assigned for all history elements Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1578147968-30938-2-git-send-email-stanley.chu@mediatek.comReviewed-by:
-
- 10 Jan, 2020 2 commits
-
-
YueHaibing authored
Fix sparse warning: drivers/scsi/lpfc/lpfc_nportdisc.c:344:1: warning: symbol 'lpfc_defer_acc_rsp' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200107014956.41748-1-yuehaibing@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Reviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Martin K. Petersen authored
Pull compat_ioctl cleanup from Arnd. Here's his description: This series concludes the work I did for linux-5.5 on the compat_ioctl() cleanup, killing off fs/compat_ioctl.c and block/compat_ioctl.c by moving everything into drivers. Overall this would be a reduction both in complexity and line count, but as I'm also adding documentation the overall number of lines increases in the end. My plan was originally to keep the SCSI and block parts separate. This did not work easily because of interdependencies: I cannot do the final SCSI cleanup in a good way without first addressing the CDROM ioctls, so this is one series that I hope could be merged through either the block or the scsi git trees, or possibly both if you can pull in the same branch. The series comes in these steps: 1. clean up the sg v3 interface as suggested by Linus. I have talked about this with Doug Gilbert as well, and he would rebase his sg v4 patches on top of "compat: scsi: sg: fix v3 compat read/write interface" 2. Actually moving handlers out of block/compat_ioctl.c and block/scsi_ioctl.c into drivers, mixed in with cleanup patches 3. Document how to do this right. I keep getting asked about this, and it helps to point to some documentation file. The branch is based on another one that fixes a couple of bugs found during the creation of this series. Changes since v3: https://lore.kernel.org/lkml/20200102145552.1853992-1-arnd@arndb.de/ - Move sr_compat_ioctl fixup to correct patch (Ben Hutchings) - Add Reviewed-by tags Changes since v2: https://lore.kernel.org/lkml/20191217221708.3730997-1-arnd@arndb.de/ - Rebase to v5.5-rc4, which contains the earlier bugfixes - Fix sr_block_compat_ioctl() error handling bug found by Ben Hutchings - Fix idecd_locked_compat_ioctl() compat_ptr() bug - Don't try to handle HDIO_DRIVE_TASKFILE in drivers/ide - More documentation improvements Changes since v1: https://lore.kernel.org/lkml/20191211204306.1207817-1-arnd@arndb.de/ - move out the bugfixes into a branch for itself - clean up scsi sg driver further as suggested by Christoph Hellwig - avoid some ifdefs by moving compat_ptr() out of asm/compat.h - split out the blkdev_compat_ptr_ioctl function; bug spotted by Ben Hutchings - Improve formatting of documentation Signed-off-by:
-
- 03 Jan, 2020 25 commits
-
-
Arnd Bergmann authored
Documentation/process/botching-up-ioctls.rst was orignally written as a blog post for DRM driver writers, so it it misses some points while going into a lot of detail on others. Try to provide a replacement that addresses typical issues across a wider range of subsystems, and follows the style of the core-api documentation better. Many improvements to the document are suggested by Ben Hutchings <ben.hutchings@codethink.co.uk>, Jonathan Corbet <corbet@lwn.net> and Geert Uytterhoeven <geert@linux-m68k.org>. Reviewed-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Having separate implementations of blkdev_ioctl() often leads to these getting out of sync, despite the comment at the top. Since most of the ioctl commands are compatible, and we try very hard not to add any new incompatible ones, move all the common bits into a shared function and leave only the ones that are historically different in separate functions for native/compat mode. To deal with the compat_ptr() conversion, pass both the integer argument and the pointer argument into the new blkdev_common_ioctl() and make sure to always use the correct one of these. blkdev_ioctl() is now only kept as a separate exported interfact for drivers/char/raw.c, which lacks a compat_ioctl variant. We should probably either move raw.c to staging if there are no more users, or export blkdev_compat_ioctl() as well. Reviewed-by:
-
Arnd Bergmann authored
There is no need to go through a compat_alloc_user_space() copy any more, just wrap the function in a small helper that works the same way for native and compat mode. Reviewed-by:
-
Arnd Bergmann authored
Having both in the same file allows a number of simplifications to the compat path, and makes it more likely that changes to the native path get applied to the compat version as well. Reviewed-by:
-
Arnd Bergmann authored
Most of the HDIO ioctls are only used by the obsolete drivers/ide subsystem, these can be handled by changing ide_cmd_ioctl() to be aware of compat mode and doing the correct transformations in place and using it as both native and compat handlers for all drivers. The SCSI drivers implementing the same commands are already doing this in the drivers, so the compat_blkdev_driver_ioctl() function is no longer needed now. The BLKSECTSET and HDIO_GETGEO_BIG ioctls are not implemented in any driver any more and no longer need any conversion. Reviewed-by:
-
Arnd Bergmann authored
The ata_sas_scsi_ioctl() function implements a number of HDIO_* commands for SCSI devices, it is used by all libata drivers as well as a few drivers that support SAS attached SATA drives. The only command that is not safe for compat ioctls here is HDIO_GET_32BIT. Change the implementation to check for in_compat_syscall() in order to do both cases correctly, and change all callers to use it as both native and compat callback pointers, including the indirect callers through sas_ioctl and ata_scsi_ioctl. Reviewed-by:
-
Arnd Bergmann authored
There is no need for the special cases for the cdrom ioctls any more now, so make sure that each cdrom driver has a .compat_ioctl() callback and calls cdrom_compat_ioctl() directly there. Reviewed-by:
-
Arnd Bergmann authored
Now that both native and compat ioctl syscalls are in the same file, a couple of simplifications can be made, bringing the implementation closer together: - do_vfs_ioctl(), ioctl_preallocate(), and compat_ioctl_preallocate() can become static, allowing the compiler to optimize better - slightly update the coding style for consistency between the functions. - rather than listing each command in two switch statements for the compat case, just call a single function that has all the common commands. As a side-effect, FS_IOC_RESVSP/FS_IOC_RESVSP64 are now available to x86 compat tasks, along with FS_IOC_RESVSP_32/FS_IOC_RESVSP64_32. This is harmless for i386 emulation, and can be considered a bugfix for x32 emulation, which never supported these in the past. Reviewed-by:
-
Arnd Bergmann authored
The rest of the fs/compat_ioctl.c file is no longer useful now, so move the actual syscall as planned. Reviewed-by:
-
Arnd Bergmann authored
Each driver calling scsi_ioctl() gets an equivalent compat_ioctl() handler that implements the same commands by calling scsi_compat_ioctl(). The scsi_cmd_ioctl() and scsi_cmd_blk_ioctl() functions are compatible at this point, so any driver that calls those can do so for both native and compat mode, with the argument passed through compat_ptr(). With this, we can remove the entries from fs/compat_ioctl.c. The new code is larger, but should be easier to maintain and keep updated with newly added commands. Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
Rather than relying on fs/compat_ioctl.c, this adds support for a compat_ioctl() callback in the ide-floppy driver directly, which lets it translate the scsi commands. Reviewed-by:
-
Arnd Bergmann authored
bsg_ioctl() calls into scsi_cmd_ioctl() for a couple of generic commands and relies on fs/compat_ioctl.c to handle it correctly in compat mode. Adding a private compat_ioctl() handler avoids that round-trip and lets us get rid of the generic emulation once this is done. Note that bsg implements an SG_IO command that is different from the other drivers and does not need emulation. Reviewed-by:
-
Arnd Bergmann authored
In order to move the compat handling for SCSI ioctl commands out of fs/compat_ioctl.c into the individual drivers, we need a helper function first to match the native ioctl handler called by sd, sr, st, etc. Reviewed-by:
-
Arnd Bergmann authored
Various block drivers implement the CDROMMULTISESSION, CDROM_GET_CAPABILITY, and CDROMEJECT ioctl commands, relying on the block layer to handle compat_ioctl mode for them. Move this into the drivers directly as a preparation for simplifying the block layer later. When only integer arguments or no arguments are passed, the same handler can be used for .ioctl and .compat_ioctl, and when only pointer arguments are passed, the newly added blkdev_compat_ptr_ioctl can be used. Reviewed-by:
-
Arnd Bergmann authored
This is the only ioctl command that does not have a proper compat handler. Making the normal implementation do the right thing is actually very simply, so just do that by using an in_compat_syscall() check to avoid the special case in the pkcdvd driver. Reviewed-by:
-
Arnd Bergmann authored
Again, there is only one file that needs this, so move the conversion handler into the native implementation. Reviewed-by:
-
Arnd Bergmann authored
There is only one implementation of this ioctl, so move the handling out of the common block layer code into the place where it's actually needed. It also gets called indirectly through pktcdvd, which needs to be aware of this change. As I noticed, the old implementation of the compat handler failed to convert the structure on the way out, so the updated fields never got written back to user space. This is either not important, or it has never worked and should be fixed now. Reviewed-by:
-
Arnd Bergmann authored
These drivers implement the HDIO_GET_IDENTITY and CDROMVOLREAD ioctl commands, which are compatible between 32-bit and 64-bit user space and traditionally handled by compat_blkdev_driver_ioctl(). As a prerequisite to removing that function, make both drivers use blkdev_compat_ptr_ioctl() as their .compat_ioctl callback. Reviewed-by:
-
Arnd Bergmann authored
A lot of block drivers need only a trivial .compat_ioctl callback. Add a helper function that can be set as the callback pointer to only convert the argument using the compat_ptr() conversion and otherwise assume all input and output data is compatible, or handled using in_compat_syscall() checks. This mirrors the compat_ptr_ioctl() helper function used in character devices. Reviewed-by:
-
Arnd Bergmann authored
In the v5.4 merge window, a cleanup patch from Al Viro conflicted with my rework of the compat handling for sg.c read(). Linus Torvalds did a correct merge but pointed out that the resulting code is still unsatisfactory. I later noticed that the sg_new_read() function still gets the compat mode wrong, when the 'count' argument is large enough to pass a compat_sg_io_hdr object, but not a nativ sg_io_hdr. To address both of these, move the definition of compat_sg_io_hdr into a scsi/sg.h to make it visible to sg.c and rewrite the logic for reading req_pack_id as well as the size check to a simpler version that gets the expected results. Fixes: c35a5cfb ("scsi: sg: sg_read(): simplify reading ->pack_id of userland sg_io_hdr_t") Fixes: 98aaaec4 ("compat_ioctl: reimplement SG_IO handling") Reviewed-by:
-
Arnd Bergmann authored
In order to avoid needless #ifdef CONFIG_COMPAT checks, move the compat_ptr() definition to linux/compat.h where it can be seen by any file regardless of the architecture. Only s390 needs a special definition, this can use the self-#define trick we have elsewhere. Reviewed-by:
-
Arnd Bergmann authored
In order to use compat_* type defininitions in device drivers outside of CONFIG_COMPAT, move the inclusion of asm-generic/compat.h ahead of the #ifdef. All other architectures already do this. Acked-by:
Will Deacon <will@kernel.org> Reviewed-by:
-
Sreekanth Reddy authored
Update mpt3sas driver version from 32.100.00.00 to 33.100.00.00 Link: https://lore.kernel.org/r/20191226111333.26131-11-sreekanth.reddy@broadcom.comSigned-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
Sreekanth Reddy authored
Remove usage of device_busy counter from driver. Instead of device_busy counter now driver uses 'nr_active' counter of request_queue to get the number of inflight request for a LUN. Link: https://lore.kernel.org/r/20191226111333.26131-10-sreekanth.reddy@broadcom.comSigned-off-by:
-
Sreekanth Reddy authored
Print the function name in which MPT command got timed out. This will facilitate debugging in which path corresponding MPT command got timeout in first failure instance of log itself. Link: https://lore.kernel.org/r/20191226111333.26131-9-sreekanth.reddy@broadcom.comSigned-off-by:
-
