- 25 Jul, 2021 6 commits
-
-
Heiko Stuebner authored
The Rockchip DSI controller on some SoCs also controls a bidrectional dphy, which would be connected to an Image Signal Processor as a phy in the rx configuration. So allow a #phy-cells property for the dsi controller. Signed-off-by:
Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Acked-by:
Rob Herring <robh@kernel.org> Tested-by:
Sebastian Fricke <sebastian.fricke@posteo.net> Acked-by:
Helen Koike <helen.koike@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210210111020.2476369-3-heiko@sntech.de
-
Heiko Stuebner authored
In a followup patch, we'll need to access the pclk ourself to enable some functionality, so get and store it in the rockchip dw-dsi variant as well. Clocks are refcounted, so possible cascading enablements are no problem. Signed-off-by:
-
Geert Uytterhoeven authored
Convert the Solomon SSD1307 Framebuffer Device Tree binding documentation to json-schema. Fix the spelling of the "pwms" property. Document default values. Make properties with default values not required. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210714145122.2530176-1-geert@linux-m68k.org
-
Geert Uytterhoeven authored
As nwl_dsi.lanes is u32, and NSEC_PER_SEC is 1000000000L, the second multiplication in dsi->lanes * 8 * NSEC_PER_SEC will overflow on a 32-bit platform. Fix this by making the constant unsigned long long, forcing 64-bit arithmetic. As iMX8 is arm64, this driver is currently used on 64-bit platforms only, where long is 64-bit, so this cannot happen. But the issue will start to happen when the driver is reused for a 32-bit SoC (e.g. i.MX7ULP), or when code is copied for a new driver. Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Oleksij Rempel authored
Add Logictechno and Multi-Inno panels: - Logic Technologies LTTD800x480 L2RT 7" 800x480 TFT Resistive Touch Module - Logic Technologies LTTD800480070-L6WH-RT 7” 800x480 TFT Resistive Touch Module - Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by:
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. v3: * return error if (ret < 0) (Geert) * remove duplicate error message (Geert) v2: * handle errors in platform_get_irq() (Geert, Sergei) * store IRQ number in struct shmob_drm_device (Laurent) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
-
- 23 Jul, 2021 11 commits
-
-
Thomas Zimmermann authored
Replace dma_buf_begin_cpu_access() with drm_gem_fb_begin_cpu_access(); same for _end_cpu_access(). Remove some boiler-plate code. No functional changes. Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210716140801.1215-8-tzimmermann@suse.de
-
Thomas Zimmermann authored
Replace dma_buf_begin_cpu_access() with drm_gem_fb_begin_cpu_access(); same for _end_cpu_access(). Remove some boiler-plate code. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Replace dma_buf_begin_cpu_access() with drm_gem_fb_begin_cpu_access(); same for _end_cpu_access(). Remove some boiler-plate code. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Replace dma_buf_begin_cpu_access() with drm_gem_fb_begin_cpu_access(); same for _end_cpu_access(). Remove some boiler-plate code. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Replace dma_buf_begin_cpu_access() with drm_gem_fb_begin_cpu_access(); same for _end_cpu_access(). Remove some boiler-plate code. No functional changes. There's one left-over reference to the imported attachment that we keep. GEM BOs with imported attachment are considered uncached and enables special handling within the drm_fb_swab(). Signed-off-by:
-
Thomas Zimmermann authored
Replace dma_buf_begin_cpu_access() with drm_gem_fb_begin_cpu_access(); same for _end_cpu_access(). Remove some boiler-plate code. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Implement helpers drm_gem_fb_begin_cpu_access() and _end_cpu_access(), which call the rsp dma-buf functions for all GEM BOs of the given framebuffer. Calls to dma_buf_end_cpu_access() can return an error code on failure, while drm_gem_fb_end_cpu_access() does not. The latter runs during DRM's atomic commit or during cleanup. Both cases don't allow for errors, so leave out the return value. v2: * fix typo in docs (Daniel) Signed-off-by:
-
Thomas Zimmermann authored
The variable 'priv' got introduced in commit 39a364a1 ("drm/hisilicon/hibmc: Convert to Linux IRQ interfaces") by accident. It's unused; remove it. Fixes a compiler warning. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
Dave Airlie <airlied@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210721131704.10306-1-tzimmermann@suse.de
-
Normunds Rieksts authored
Arm Fixed Rate Compression (AFRC) is a proprietary fixed rate image compression protocol and format. It is designed to provide guaranteed bandwidth and memory footprint reductions in graphics and media use-cases. This patch aims to add modifier definitions for describing AFRC. Signed-off-by:
Normunds Rieksts <normunds.rieksts@arm.com> Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Maxime Ripard authored
New KMS properties come with a bunch of requirements to avoid each driver from running their own, inconsistent, set of properties, eventually leading to issues like property conflicts, inconsistencies between drivers and semantics, etc. Let's document what we expect. Acked-by:
Dave Airlie <airlied@redhat.com> Reviewed-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210720143544.571760-1-maxime@cerno.tech
-
Chris Morgan authored
Set a condition for the message of "Couldn't set OPP regulators" to not display if the error code is EPROBE_DEFER. Note that I used an if statement to capture the condition instead of the dev_err_probe function because I didn't want to change the DRM_DEV_ERROR usage. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
- 22 Jul, 2021 1 commit
-
-
Maxime Ripard authored
The corpro,gm7123 was in use in a DT but was never properly documented, let's add it. Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
- 21 Jul, 2021 11 commits
-
-
Zheyu Ma authored
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'pixclock', it may cause divide error because of the 'PICOS2KHZ' macro. Fix this by checking whether 'pixclock' is zero first. The following log reveals it: [ 53.093806] divide error: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.093838] CPU: 3 PID: 11763 Comm: hang Not tainted 5.14.0-rc2-00478-g2734d6c1 #215 [ 53.093859] RIP: 0010:neofb_check_var+0x80/0xe50 [ 53.093951] Call Trace: [ 53.093956] ? neofb_setcolreg+0x2b0/0x2b0 [ 53.093968] fb_set_var+0x2e4/0xeb0 [ 53.093977] ? fb_blank+0x1a0/0x1a0 [ 53.093984] ? lock_acquire+0x1ef/0x530 [ 53.093996] ? lock_release+0x810/0x810 [ 53.094005] ? lock_is_held_type+0x100/0x140 [ 53.094016] ? ___might_sleep+0x1ee/0x2d0 [ 53.094028] ? __mutex_lock+0x620/0x1190 [ 53.094036] ? do_fb_ioctl+0x313/0x700 [ 53.094044] ? mutex_lock_io_nested+0xfa0/0xfa0 [ 53.094051] ? __this_cpu_preempt_check+0x1d/0x30 [ 53.094060] ? _raw_spin_unlock_irqrestore+0x46/0x60 [ 53.094069] ? lockdep_hardirqs_on+0x59/0x100 [ 53.094076] ? _raw_spin_unlock_irqrestore+0x46/0x60 [ 53.094085] ? trace_hardirqs_on+0x6a/0x1c0 [ 53.094096] do_fb_ioctl+0x31e/0x700 Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
-
Colin Ian King authored
The variable err is being initialized with a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Javier Martinez Canillas authored
The register_gop_device() function registers an "efi-framebuffer" platform device to match against the efifb driver, to have an early framebuffer for EFI platforms. But there is already support to do exactly the same by the Generic System Framebuffers (sysfb) driver. This used to be only for X86 but it has been moved to drivers/firmware and could be reused by other architectures. Also, besides supporting registering an "efi-framebuffer", this driver can register a "simple-framebuffer" allowing to use the siple{fb,drm} drivers on non-X86 EFI platforms. For example, on aarch64 these drivers can only be used with DT and doesn't have code to register a "simple-frambuffer" platform device when booting with EFI. For these reasons, let's remove the register_gop_device() duplicated code and instead move the platform specific logic that's there to sysfb driver. Signed-off-by:Javier Martinez Canillas <javierm@redhat.com> Acked-by:
Borislav Petkov <bp@suse.de> Acked-by:
-
Javier Martinez Canillas authored
The x86 architecture has generic support to register a system framebuffer platform device. It either registers a "simple-framebuffer" if the config option CONFIG_X86_SYSFB is enabled, or a legacy VGA/VBE/EFI FB device. But the code is generic enough to be reused by other architectures and can be moved out of the arch/x86 directory. This will allow to also support the simple{fb,drm} drivers on non-x86 EFI platforms, such as aarch64 where these drivers are only supported with DT. Signed-off-by:Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
-
Christoph Hellwig authored
The VGA arbitration is entirely based on pci_dev structures, so just pass that back to the set_vga_decode callback. Signed-off-by:
Christoph Hellwig <hch@lst.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-8-hch@lst.deAcked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Christoph Hellwig authored
All callers pass NULL as the irq_set_state argument, so remove it and the ->irq_set_state member in struct vga_device. Signed-off-by:
-
Christoph Hellwig authored
Add a trivial wrapper for the unregister case that sets all fields to NULL. Signed-off-by:
-
Christoph Hellwig authored
Merge the different CONFIG_VGA_ARB ifdef blocks, remove superflous externs, and regularize the stubs for !CONFIG_VGA_ARB. Signed-off-by:
-
Christoph Hellwig authored
Kerneldoc comments should be at the implementation side, not in the header just declaring the prototype. Signed-off-by:
-
Christoph Hellwig authored
vga_conflicts only has a single caller and none of the arch overrides mentioned in the comment. Just remove it and the thus dead check in the caller. Signed-off-by:
-
Christoph Hellwig authored
The define is entirely unused. Signed-off-by:
-
- 20 Jul, 2021 11 commits
-
-
Juan A. Suarez Romero authored
The V3D engine has several hardware performance counters that can of interest for userspace performance analysis tools. This exposes new ioctls to create and destroy performance monitor objects, as well as to query the counter values. Each created performance monitor object has an ID that can be attached to CL/CSD submissions, so the driver enables the requested counters when the job is submitted, and updates the performance monitor values when the job is done. It is up to the user to ensure all the jobs have been finished before getting the performance monitor values. It is also up to the user to properly synchronize BCL jobs when submitting jobs with different performance monitors attached. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Emma Anholt <emma@anholt.net> To: dri-devel@lists.freedesktop.org Signed-off-by:
Juan A. Suarez Romero <jasuarez@igalia.com> Acked-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608111541.461991-1-jasuarez@igalia.com
-
Desmond Cheong Zhi Xi authored
drm_file->master pointers should be protected by drm_device.master_mutex or drm_file.master_lookup_lock when being dereferenced. However, in drm_lease.c, there are multiple instances where drm_file->master is accessed and dereferenced while neither lock is held. This makes drm_lease.c vulnerable to use-after-free bugs. We address this issue in 2 ways: 1. Add a new drm_file_get_master() function that calls drm_master_get on drm_file->master while holding on to drm_file.master_lookup_lock. Since drm_master_get increments the reference count of master, this prevents master from being freed until we unreference it with drm_master_put. 2. In each case where drm_file->master is directly accessed and eventually dereferenced in drm_lease.c, we wrap the access in a call to the new drm_file_get_master function, then unreference the master pointer once we are done using it. Reported-by:
Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Reviewed-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
-
Desmond Cheong Zhi Xi authored
Currently, drm_file.master pointers should be protected by drm_device.master_mutex when being dereferenced. This is because drm_file.master is not invariant for the lifetime of drm_file. If drm_file is not the creator of master, then drm_file.is_master is false, and a call to drm_setmaster_ioctl will invoke drm_new_set_master, which then allocates a new master for drm_file and puts the old master. Thus, without holding drm_device.master_mutex, the old value of drm_file.master could be freed while it is being used by another concurrent process. However, it is not always possible to lock drm_device.master_mutex to dereference drm_file.master. Through the fbdev emulation code, this might occur in a deep nest of other locks. But drm_device.master_mutex is also the outermost lock in the nesting hierarchy, so this leads to potential deadlocks. To address this, we introduce a new spin lock at the bottom of the lock hierarchy that only serializes drm_file.master. With this change, the value of drm_file.master changes only when both drm_device.master_mutex and drm_file.master_lookup_lock are held. Hence, any process holding either of those locks can ensure that the value of drm_file.master will not change concurrently. Since no lock depends on the new drm_file.master_lookup_lock, when drm_file.master is dereferenced, but drm_device.master_mutex cannot be held, we can safely protect the master pointer with drm_file.master_lookup_lock. Reported-by:
-
Desmond Cheong Zhi Xi authored
While checking the master status of the DRM file in drm_is_current_master(), the device's master mutex should be held. Without the mutex, the pointer fpriv->master may be freed concurrently by another process calling drm_setmaster_ioctl(). This could lead to use-after-free errors when the pointer is subsequently dereferenced in drm_lease_owner(). The callers of drm_is_current_master() from drm_auth.c hold the device's master mutex, but external callers do not. Hence, we implement drm_is_current_master_locked() to be used within drm_auth.c, and modify drm_is_current_master() to grab the device's master mutex before checking the master status. Reported-by:
-
Desmond Cheong Zhi Xi authored
Inside drm_clients_info, the rcu_read_lock is held to lock pid_task()->comm. However, within this protected section, a call to drm_is_current_master is made, which involves a mutex lock in a future patch. However, this is illegal because the mutex lock might block while in the RCU read-side critical section. Since drm_is_current_master isn't protected by rcu_read_lock, we avoid this by moving it out of the RCU critical section. The following report came from intel-gfx ci's igt@debugfs_test@read_all_entries testcase: ============================= [ BUG: Invalid wait context ] 5.13.0-CI-Patchwork_20515+ #1 Tainted: G W ----------------------------- debugfs_test/1101 is trying to lock: ffff888132d901a8 (&dev->master_mutex){+.+.}-{3:3}, at: drm_is_current_master+0x1e/0x50 other info that might help us debug this: context-{4:4} 3 locks held by debugfs_test/1101: #0: ffff88810fdffc90 (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0x53/0x3b0 #1: ffff888132d90240 (&dev->filelist_mutex){+.+.}-{3:3}, at: drm_clients_info+0x63/0x2a0 #2: ffffffff82734220 (rcu_read_lock){....}-{1:2}, at: drm_clients_info+0x1b1/0x2a0 stack backtrace: CPU: 8 PID: 1101 Comm: debugfs_test Tainted: G W 5.13.0-CI-Patchwork_20515+ #1 Hardware name: Intel Corporation CometLake Client Platform/CometLake S UDIMM (ERB/CRB), BIOS CMLSFWR1.R00.1263.D00.1906260926 06/26/2019 Call Trace: dump_stack+0x7f/0xad __lock_acquire.cold.78+0x2af/0x2ca lock_acquire+0xd3/0x300 ? drm_is_current_master+0x1e/0x50 ? __mutex_lock+0x76/0x970 ? lockdep_hardirqs_on+0xbf/0x130 __mutex_lock+0xab/0x970 ? drm_is_current_master+0x1e/0x50 ? drm_is_current_master+0x1e/0x50 ? drm_is_current_master+0x1e/0x50 drm_is_current_master+0x1e/0x50 drm_clients_info+0x107/0x2a0 seq_read_iter+0x178/0x3b0 seq_read+0x104/0x150 full_proxy_read+0x4e/0x80 vfs_read+0xa5/0x1b0 ksys_read+0x5a/0xd0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by: -
Desmond Cheong Zhi Xi authored
In preparation for a future patch to take a lock on drm_device.master_mutex inside drm_is_current_master(), we first move the call to drm_is_current_master() in drm_mode_getconnector out from the section locked by &dev->mode_config.mutex. This avoids creating a circular lock dependency. Failing to avoid this lock dependency produces the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.13.0-rc7-CI-CI_DRM_10254+ #1 Not tainted ------------------------------------------------------ kms_frontbuffer/1087 is trying to acquire lock: ffff88810dcd01a8 (&dev->master_mutex){+.+.}-{3:3}, at: drm_is_current_master+0x1b/0x40 but task is already holding lock: ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&dev->mode_config.mutex){+.+.}-{3:3}: __mutex_lock+0xab/0x970 drm_client_modeset_probe+0x22e/0xca0 __drm_fb_helper_initial_config_and_unlock+0x42/0x540 intel_fbdev_initial_config+0xf/0x20 [i915] async_run_entry_fn+0x28/0x130 process_one_work+0x26d/0x5c0 worker_thread+0x37/0x380 kthread+0x144/0x170 ret_from_fork+0x1f/0x30 -> #1 (&client->modeset_mutex){+.+.}-{3:3}: __mutex_lock+0xab/0x970 drm_client_modeset_commit_locked+0x1c/0x180 drm_client_modeset_commit+0x1c/0x40 __drm_fb_helper_restore_fbdev_mode_unlocked+0x88/0xb0 drm_fb_helper_set_par+0x34/0x40 intel_fbdev_set_par+0x11/0x40 [i915] fbcon_init+0x270/0x4f0 visual_init+0xc6/0x130 do_bind_con_driver+0x1e5/0x2d0 do_take_over_console+0x10e/0x180 do_fbcon_takeover+0x53/0xb0 register_framebuffer+0x22d/0x310 __drm_fb_helper_initial_config_and_unlock+0x36c/0x540 intel_fbdev_initial_config+0xf/0x20 [i915] async_run_entry_fn+0x28/0x130 process_one_work+0x26d/0x5c0 worker_thread+0x37/0x380 kthread+0x144/0x170 ret_from_fork+0x1f/0x30 -> #0 (&dev->master_mutex){+.+.}-{3:3}: __lock_acquire+0x151e/0x2590 lock_acquire+0xd1/0x3d0 __mutex_lock+0xab/0x970 drm_is_current_master+0x1b/0x40 drm_mode_getconnector+0x37e/0x4a0 drm_ioctl_kernel+0xa8/0xf0 drm_ioctl+0x1e8/0x390 __x64_sys_ioctl+0x6a/0xa0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &dev->master_mutex --> &client->modeset_mutex --> &dev->mode_config.mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->mode_config.mutex); lock(&client->modeset_mutex); lock(&dev->mode_config.mutex); lock(&dev->master_mutex); *** DEADLOCK *** 1 lock held by kms_frontbuffer/1087: #0: ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0 stack backtrace: CPU: 7 PID: 1087 Comm: kms_frontbuffer Not tainted 5.13.0-rc7-CI-CI_DRM_10254+ #1 Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3234.A01.1906141750 06/14/2019 Call Trace: dump_stack+0x7f/0xad check_noncircular+0x12e/0x150 __lock_acquire+0x151e/0x2590 lock_acquire+0xd1/0x3d0 __mutex_lock+0xab/0x970 drm_is_current_master+0x1b/0x40 drm_mode_getconnector+0x37e/0x4a0 drm_ioctl_kernel+0xa8/0xf0 drm_ioctl+0x1e8/0x390 __x64_sys_ioctl+0x6a/0xa0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: -
Jim Cromie authored
s/prink/printk/ - no functional changes Signed-off-by:
Jim Cromie <jim.cromie@gmail.com> Signed-off-by:
-
Guangming Cao authored
Dmabuf sysfs stat is used for dmabuf info track. But these file maybe still in use after buffer released, should clear it before buffer release. Signed-off-by:
Guangming Cao <Guangming.Cao@mediatek.com> Reviewed-by:
-
Yang Yingliang authored
Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() will be called in release automatically. v3: reformat commit message update for move to tiny/ v2: use pcim_enable_device() Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Acked-by:
-
KuoHsiang Chou authored
[Bug][AST2500] V1: When AST2500 acts as stand-alone VGA so that DRAM and DVO initialization have to be achieved by VGA driver with P2A (PCI to AHB) enabling. However, HW suggests disable Fast reset mode after DRAM initializaton, because fast reset mode is mainly designed for ARM ICE debugger. Once Fast reset is checked as enabling, WDT (Watch Dog Timer) should be first enabled to avoid system deadlock before disable fast reset mode. V2: Use to_pci_dev() to get revision of PCI configuration. V3: If SCU00 is not unlocked, just enter its password again. It is unnecessary to clear AHB lock condition and restore WDT default setting again, before Fast-reset clearing. V4: repatch after "error : could not build fake ancestor" resolved. V5: Since CVE_2019_6260 item3, Most of AST2500 have disabled P2A(PCIe to AMBA). However, for backward compatibility, some patches about P2A, such as items of v5.2 and v5.3, are considered to be upstreamed with comments. 1. Add define macro to improve source readability. ast_drv.h, ast_main.c, ast_post.c 2. Add comment about "Fast restet" is enabled for ARM-ICE debugger ast_post.c 3. Add comment about Reset USB port to patch USB unknown device issue ast_post.c Signed-off-by:
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by:
-
Ainux.Wang authored
The function ast_get_modes() will also return 0, when it try to get the edid, but it also do not get the edid. Signed-off-by:
Ainux.Wang <ainux.wang@gmail.com> Signed-off-by:
-
