We don't need to refill the rx descriptors on every napi
if only a few were handled.  Waiting until we can batch up
a few together will save us a few Rx cycles.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

After the queues are stopped, expressly quiesce the lif.
This assures that even if the queues were in an odd state,
the firmware will close up everything cleanly.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Request a link check as soon as the netdev is registered rather
than waiting for the watchdog to go off in order to get the
interface operational a little more quickly.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Change the order of operations in the link_up handling to be
sure that the queues are up and ready before we announce that
the link is up.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Check PTR_ERR with IS_ERR to fix this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20201112144936.54776-1-yuehaibing@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit bdb7cc64 ("ipv6: Count interface receive statistics on the
ingress netdev") removed all callees for ipv6_skb_idev(). Hence, since
then, ipv6_skb_idev() is unused and make CC=clang W=1 warns:

  net/ipv6/exthdrs.c:909:33:
    warning: unused function 'ipv6_skb_idev' [-Wunused-function]

So, remove this unused function and a -Wunused-function warning.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20201113135012.32499-1-lukas.bulwahn@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-11-14

1) Add BTF generation for kernel modules and extend BTF infra in kernel
   e.g. support for split BTF loading and validation, from Andrii Nakryiko.

2) Support for pointers beyond pkt_end to recognize LLVM generated patterns
   on inlined branch conditions, from Alexei Starovoitov.

3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh.

4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage
   infra, from Martin KaFai Lau.

5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the
   XDP_REDIRECT path, from Lorenzo Bianconi.

6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI
   context, from Song Liu.

7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build
   for different target archs on same source tree, from Jean-Philippe Brucker.

8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet.

9) Move functionality from test_tcpbpf_user into the test_progs framework so it
   can run in BPF CI, from Alexander Duyck.

10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner.

Note that for the fix from Song we have seen a sparse report on context
imbalance which requires changes in sparse itself for proper annotation
detection where this is currently being discussed on linux-sparse among
developers [0]. Once we have more clarification/guidance after their fix,
Song will follow-up.

  [0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/
      https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/

* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits)
  net: mlx5: Add xdp tx return bulking support
  net: mvpp2: Add xdp tx return bulking support
  net: mvneta: Add xdp tx return bulking support
  net: page_pool: Add bulk support for ptr_ring
  net: xdp: Introduce bulking for xdp tx return path
  bpf: Expose bpf_d_path helper to sleepable LSM hooks
  bpf: Augment the set of sleepable LSM hooks
  bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP
  bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP
  bpf: Rename some functions in bpf_sk_storage
  bpf: Folding omem_charge() into sk_storage_charge()
  selftests/bpf: Add asm tests for pkt vs pkt_end comparison.
  selftests/bpf: Add skb_pkt_end test
  bpf: Support for pointers beyond pkt_end.
  tools/bpf: Always run the *-clean recipes
  tools/bpf: Add bootstrap/ to .gitignore
  bpf: Fix NULL dereference in bpf_task_storage
  tools/bpftool: Fix build slowdown
  tools/runqslower: Build bpftool using HOSTCC
  tools/runqslower: Enable out-of-tree build
  ...
====================

Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add VSC8572 and VSC8574 in the PTP configuration
as they also support PTP.

The relevant datasheets can be found here:
  - VSC8572: https://www.microchip.com/wwwproducts/en/VSC8572
  - VSC8574: https://www.microchip.com/wwwproducts/en/VSC8574Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20201112092250.914079-1-steen.hegelund@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Lorenzo Bianconi says:

====================
XDP bulk APIs introduce a defer/flush mechanism to return
pages belonging to the same xdp_mem_allocator object
(identified via the mem.id field) in bulk to optimize
I-cache and D-cache since xdp_return_frame is usually
run inside the driver NAPI tx completion loop.

Convert mvneta, mvpp2 and mlx5 drivers to xdp_return_frame_bulk APIs.

More details on benchmarks run on mlx5 can be found here:
https://github.com/xdp-project/xdp-project/blob/master/areas/mem/xdp_bulk_return01.org

Changes since v5:
- do not keep looping over ptr_ring if the cache is full but release leftover
  pages running page_pool_return_page

Changes since v4:
- fix comments
- introduce xdp_frame_bulk_init utility routine
- compiler annotations for I-cache code layout
- move rcu_read_lock outside fast-path
- mlx5 xdp bulking code optimization

Changes since v3:
- align DEV_MAP_BULK_SIZE to XDP_BULK_QUEUE_SIZE
- refactor page_pool_put_page_bulk to avoid code duplication

Changes since v2:
- move mvneta changes in a dedicated patch

Changes since v1:
- improve comments
- rework xdp_return_frame_bulk routine logic
- move count and xa fields at the beginning of xdp_frame_bulk struct
- invert logic in page_pool_put_page_bulk for loop
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>

Convert mlx5 driver to xdp_return_frame_bulk APIs.

XDP_REDIRECT (upstream codepath): 8.9Mpps
XDP_REDIRECT (upstream codepath + bulking APIs): 10.2Mpps
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/250460319fd868b7b5668fc1deca74dd42813a90.1605267335.git.lorenzo@kernel.org

Convert mvpp2 driver to xdp_return_frame_bulk APIs.

XDP_REDIRECT (upstream codepath): 1.79Mpps
XDP_REDIRECT (upstream codepath + bulking APIs): 1.93Mpps
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Matteo Croce <mcroce@microsoft.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/0b38c295e58e8ce251ef6b4e2187a2f457f9f7a3.1605267335.git.lorenzo@kernel.org

Convert mvneta driver to xdp_return_frame_bulk APIs.

XDP_REDIRECT (upstream codepath): 275Kpps
XDP_REDIRECT (upstream codepath + bulking APIs): 284Kpps
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/9af8014006d022fc0fec78cdaa71beb56999750d.1605267335.git.lorenzo@kernel.org

Introduce the capability to batch page_pool ptr_ring refill since it is
usually run inside the driver NAPI tx completion loop.
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/bpf/08dd249c9522c001313f520796faa777c4089e1c.1605267335.git.lorenzo@kernel.org

XDP bulk APIs introduce a defer/flush mechanism to return
pages belonging to the same xdp_mem_allocator object
(identified via the mem.id field) in bulk to optimize
I-cache and D-cache since xdp_return_frame is usually run
inside the driver NAPI tx completion loop.
The bulk queue size is set to 16 to be aligned to how
XDP_REDIRECT bulking works. The bulk is flushed when
it is full or when mem.id changes.
xdp_frame_bulk is usually stored/allocated on the function
call-stack to avoid locking penalties.
Current implementation considers only page_pool memory model.
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/bpf/e190c03eac71b20c8407ae0fc2c399eda7835f49.1605267335.git.lorenzo@kernel.org

Use the devm_reset_control_get_optional() and devm_clk_get_optional()
rather than open coding them.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20201112092606.5173aa6f@xhacker.debianSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We can simplify the for() condition and eliminate variable tx_left.
The change also considers that tp->cur_tx may be incremented by a
racing rtl8169_start_xmit().
In addition replace the write to tp->dirty_tx and the following
smp_mb() with an equivalent call to smp_store_mb(). This implicitly
adds a WRITE_ONCE() to the write.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/c2e19e5e-3d3f-d663-af32-13c3374f5def@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tp->dirty_tx and tp->cur_tx may be changed by a racing rtl_tx() or
rtl8169_start_xmit(). Use READ_ONCE() to annotate the races and ensure
that the compiler doesn't use cached values.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/5676fee3-f6b4-84f2-eba5-c64949a371ad@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: two fixes

This small series makes two fixes to the IPA code:
  - While reviewing something else I found that one of the resource
    limits on the SDM845 used the wrong value.  The first patch
    fixes this.  The correct value allocates more resources of this
    type for IPA to use, and otherwise does not change behavior.
  - When the IPA-resident microcontroller starts up it generates an
    event, which triggers an AP interrupt.  The event merely
    provides some information for logging, which we don't support.
    We already ignore the event, and that's harmless.  So this
    patch explicitly ignores it rather than issuing a warning when
    it occurs.
====================

Link: https://lore.kernel.org/r/20201112121157.19784-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The IPA-resident microcontroller has the ability to log various
activity in an area of IPA shared memory.  When the microcontroller
starts it generates an event to the AP to provide information about
the log.

We don't support reading this log, and we can safely ignore the
event.  So do that rather than treating the log info event we
receive as "unsupported."
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

I have discovered that the maximum number of source packet contexts
configured for SDM845 is incorrect.  Fix this error.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Edward Cree says:

====================
sfc: further EF100 encap TSO features

This series adds support for GRE and GRE_CSUM TSO on EF100 NICs, as
 well as improving the handling of UDP tunnel TSO.
====================

Link: https://lore.kernel.org/r/eda2de73-edf2-8b92-edb9-099ebda09ebc@solarflare.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We can treat SKB_GSO_GRE almost exactly the same as UDP tunnels, except
 that we don't want to edit the outer UDP len (as there isn't one).
For SKB_GSO_GRE_CSUM, we have to use GSO_PARTIAL as the device doesn't
 support offload of non-UDP outer L4 checksums.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin Habets <mhabets@solarflare.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>

By asking the HW for the correct edits, we can make UDP tunnel TSO
 work without needing GSO_PARTIAL.  So don't specify it in our
 netdev->gso_partial_features.
However, retain GSO_PARTIAL support, as this will be used for other
 protocols later.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin Habets <mhabets@solarflare.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>

Our TSO descriptors got even more fussy.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Martin Habets <mhabets@solarflare.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>

Alex Elder says:

====================
net: ipa: GSI register consolidation

This series rearranges and consolidates some GSI register
definitions.  Its general aim is to make things more
consistent, by:
  - Using enumerated types to define the values held in GSI register
    fields
  - Defining field values in "gsi_reg.h", together with the
    definition of the register (and field) that holds them
  - Format enumerated type members consistently, with hexidecimal
    numeric values, and assignments aligned on the same column

There is one checkpatch "CHECK" warning requesting a blank line; I
ignored that because my intention was to group certain definitions.
====================

Link: https://lore.kernel.org/r/20201110215922.23514-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Replace constants defined with an "_FVAL" suffix with values defined
in enumerated types, to be consistent with other usage in the driver.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The gsi_ch_cmd_opcode, gsi_evt_cmd_opcode, and gsi_generic_cmd_opcode
enumerated types are values that fields in the GSI command registers
can take on.  Move their definitions out of "gsi.c" and into "gsi_reg.h",
alongside the definition of registers they are associated with.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The gsi_err_code and gsi_err_type enumerated types are values that
fields in the GSI ERROR_LOG register can take on.  Move their
definitions out of "gsi.c" and into "gsi_reg.h", alongside the
definition of the ERROR_LOG register offset and field symbols.

Drop the "_ERR" suffix in the names of the gsi_err_code members.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The gsi_channel_type enumerated type define values used for the
channel type/protocol for event rings and channels.  Move its
definition out of "gsi.c" and into "gsi_reg.h", alongside the
definition of the CH_C_CNTXT_0 register offset and its fields.
Add a comment near the definition of the EV_CH_E_CNTXT_0 register
indicating this type is used for its EV_CHTYPE field.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The numeric values that represent the event ring channel type are
identical to the values that represent the matching protocol used
for a channel.  Use a new gsi_channel_type enumerated type to
represent the values programmed for both cases, using "CHANNEL_TYPE"
in member names in place of "EVT_CHTYPE" and "CHANNEL_PROTOCOL".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Define the GSI global interrupt types with an enumerated type whose
values are the bit positions representing the global interrupt types.

Similarly, define the GSI general interrupt types with an enumerated
type whose values are the bit positions of general interrupt types.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Replace strncpy() with strscpy(), fixes the following warning:

In function 'bearer_name_validate',
    inlined from 'tipc_enable_bearer' at net/tipc/bearer.c:246:7:
net/tipc/bearer.c:141:2: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  strncpy(name_copy, name, TIPC_MAX_BEARER_NAME);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Link: https://lore.kernel.org/r/20201112093442.8132-1-wenlin.kang@windriver.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mac80211-next-for-net-next-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Some updates:
 * injection/radiotap updates for new test capabilities
 * remove WDS support - even years ago when we turned
   it off by default it was already basically unusable
 * support for HE (802.11ax) rates for beacons
 * support for some vendor-specific HE rates
 * many other small features/cleanups

* tag 'mac80211-next-for-net-next-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (21 commits)
  nl80211: fix kernel-doc warning in the new SAE attribute
  cfg80211: remove WDS code
  mac80211: remove WDS-related code
  rt2x00: remove WDS code
  b43legacy: remove WDS code
  b43: remove WDS code
  carl9170: remove WDS code
  ath9k: remove WDS code
  wireless: remove CONFIG_WIRELESS_WDS
  mac80211: assure that certain drivers adhere to DONT_REORDER flag
  mac80211: don't overwrite QoS TID of injected frames
  mac80211: adhere to Tx control flag that prevents frame reordering
  mac80211: add radiotap flag to assure frames are not reordered
  mac80211: save HE oper info in BSS config for mesh
  cfg80211: add support to configure HE MCS for beacon rate
  nl80211: fix beacon tx rate mask validation
  nl80211/cfg80211: fix potential infinite loop
  cfg80211: Add support to calculate and report 4096-QAM HE rates
  cfg80211: Add support to configure SAE PWE value to drivers
  ieee80211: Add definition for WFA DPP
  ...
====================

Link: https://lore.kernel.org/r/20201113101148.25268-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sleepable hooks are never called from an NMI/interrupt context, so it
is safe to use the bpf_d_path helper in LSM programs attaching to these
hooks.

The helper is not restricted to sleepable programs and merely uses the
list of sleepable hooks as the initial subset of LSM hooks where it can
be used.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201113005930.541956-3-kpsingh@chromium.org

Update the set of sleepable hooks with the ones that do not trigger
a warning with might_fault() when exercised with the correct kernel
config options enabled, i.e.

	DEBUG_ATOMIC_SLEEP=y
	LOCKDEP=y
	PROVE_LOCKING=y

This means that a sleepable LSM eBPF program can be attached to these
LSM hooks. A new helper method bpf_lsm_is_sleepable_hook is added and
the set is maintained locally in bpf_lsm.c
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201113005930.541956-2-kpsingh@chromium.org

Martin KaFai says:

====================

This set is to allow the FENTRY/FEXIT/RAW_TP tracing program to use
bpf_sk_storage.  The first two patches are a cleanup.  The last patch is
tests.  Patch 3 has the required kernel changes to
enable bpf_sk_storage for FENTRY/FEXIT/RAW_TP.

Please see individual patch for details.

v2:
- Rename some of the function prefix from sk_storage to bpf_sk_storage
- Use prefix check instead of substr check
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch tests storing the task's related info into the
bpf_sk_storage by fentry/fexit tracing at listen, accept,
and connect.  It also tests the raw_tp at inet_sock_set_state.

A negative test is done by tracing the bpf_sk_storage_free()
and using bpf_sk_storage_get() at the same time.  It ensures
this bpf program cannot load.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201112211320.2587537-1-kafai@fb.com

This patch enables the FENTRY/FEXIT/RAW_TP tracing program to use
the bpf_sk_storage_(get|delete) helper, so those tracing programs
can access the sk's bpf_local_storage and the later selftest
will show some examples.

The bpf_sk_storage is currently used in bpf-tcp-cc, tc,
cg sockops...etc which is running either in softirq or
task context.

This patch adds bpf_sk_storage_get_tracing_proto and
bpf_sk_storage_delete_tracing_proto.  They will check
in runtime that the helpers can only be called when serving
softirq or running in a task context.  That should enable
most common tracing use cases on sk.

During the load time, the new tracing_allowed() function
will ensure the tracing prog using the bpf_sk_storage_(get|delete)
helper is not tracing any bpf_sk_storage*() function itself.
The sk is passed as "void *" when calling into bpf_local_storage.

This patch only allows tracing a kernel function.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201112211313.2587383-1-kafai@fb.com

Rename some of the functions currently prefixed with sk_storage
to bpf_sk_storage.  That will make the next patch have fewer
prefix check and also bring the bpf_sk_storage.c to a more
consistent function naming.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20201112211307.2587021-1-kafai@fb.com

sk_storage_charge() is the only user of omem_charge().
This patch simplifies it by folding omem_charge() into
sk_storage_charge().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20201112211301.2586255-1-kafai@fb.com