- 10 Aug, 2021 36 commits
-
-
Martin Kaiser authored
We should use the standard mechanism for debug prints. Remove the prints that use driver-specific macros. Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20210807153636.11712-10-martin@kaiser.cxSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Kaiser authored
We should use the standard mechanism for debug prints. Remove the prints that use driver-specific macros. Signed-off-by:
-
Martin Kaiser authored
We should use the standard mechanism for debug prints. Remove a print that uses a driver-specific macro. Signed-off-by:
-
Martin Kaiser authored
We should use the standard mechanism for debug prints. Remove the prints that use driver-specific macros. Handle errors from dev_alloc_name in one place instead of showing a debug print. Signed-off-by:
-
Martin Kaiser authored
We should use the standard mechanism for debug prints. Remove the prints that use driver-specific macros. Signed-off-by:
-
Martin Kaiser authored
With the RT_TRACE print removed, the rtw_wx_set_freq function is now empty. This function should be removed. At the moment, the setfreq ioctl returns success to the caller although the frequency wasn't set. It makes more sense to inform callers that this driver does not support setfreq. Signed-off-by:
-
Martin Kaiser authored
We should use the standard mechanism for debug prints. Remove the prints that use driver-specific macros. Signed-off-by:
-
Martin Kaiser authored
We should use the standard mechanism for debug prints. Remove the prints that use driver-specific macros. Signed-off-by:
-
Martin Kaiser authored
We should use the standard mechanism for debug prints. Remove the prints that use driver-specific macros. Signed-off-by:
-
Fabio Aiuto authored
remove unused RF_*T*R enum, for rtl8723bs is only capable of 1T1R rf path so selection is not needed. Signed-off-by:
Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/2f2f185a80fbec71af4a165180ed0156d194c96e.1628329348.git.fabioaiuto83@gmail.comSigned-off-by:
-
Fabio Aiuto authored
fix sizes of tx power tables to the real used values (i.e. 2 bandwidth, 3 rate sections). Delete MAX_BASE_NUM_IN_PHY_REG_PG_2_4 macro in this process, for it expands to a larger than needed rate section index value. Modify comments accordingly. Signed-off-by:
-
Fabio Aiuto authored
use MAX_RF_PATH_NUM as ceiling to rf path index. Only 2 rf paths are used, not 4. Remove also TX_POWER_BY_RATE_NUM_RF left unused. Use RF_PATH_A as loop starting point instead of hardcoded 0, as in other places. Related comments modified accordingly. Signed-off-by:
-
Fabio Aiuto authored
remove RF_*TX enum, its only used value is RF_1TX. So remove it and remove all indexes and loop over these enum items. Signed-off-by:
-
Fabio Aiuto authored
remove unused macro in include/hal_data.h Signed-off-by:
-
Fabio Aiuto authored
remove unused rtw_rf_config module param and struct field used to store the param value. Signed-off-by:
-
Fabio Aiuto authored
remove all function calls to rtw_get_hw_reg made to read HW_VAR_RF_TYPE and get value of rt_type, which is always 1T1R. Clean up code on removal sites, keeping 1T1R code unconditionally. Signed-off-by:
-
Fabio Aiuto authored
remove rf_type struct member, keep all 1T1R code unconditionally, remove the other *T*R branches. Removed dead code related to MCS indexes above 7. Signed-off-by:
-
Fabio Aiuto authored
remove RFType field in dm_odm_t struct, keep unconditioned all code branches related to 1T1R path, delete the others. Remove unused variable to silence gcc warning. Signed-off-by:
-
Fabio Aiuto authored
remove rf type branching, for the baseband works only on 1T1R rf type, so just keep code branches related to 1T1R. Remove RFType from hal_version struct, and all related code. Signed-off-by:
-
Fabio Aiuto authored
remove unused bIsMPChip struct member and all code storing it. Signed-off-by:
-
Fabio Aiuto authored
remove unused macros in hal/odm_HWConfig.h Signed-off-by:
-
Fabio Aiuto authored
rtl8723bs support only two rf paths (A and B), remove all the others (C, D, BC, ...) as they are unused. Keep just one enum selecting rf path, remove unused macro indicating max rf path number, add an item in rf_path enum for this pourpose. Signed-off-by:
-
Fabio Aiuto authored
TxNum value is compared against ODM_RF_PATH_D, which is inconsistent. Compare it against RF_MAX_TX_NUM, as in other places in the same file. Signed-off-by:
-
Fabio Aiuto authored
beautify function ODM_PhyStatusQuery(). Fix camel case name, put more than one argument per line, fix camel case in arugment names. Signed-off-by:
-
Fabio Aiuto authored
remove unneeded wrapping static function in hal/odm_HWConif.c Signed-off-by:
-
Fabio Aiuto authored
remove empty files after function move, hal/odm_RTL8723B.h has only an unused macro declaration. Signed-off-by:
-
Fabio Aiuto authored
move function odm_cck_rssi() to hal/odm_HWConfig.c. As it is used only in this file turn it to static. Signed-off-by:
-
Fabio Aiuto authored
do some code cleaning after changes of previous commit. Fixed comments, camel case names, variable naming conventions; kept function names without chip series numbers (this is just code for 8723), fixed indentations, blank lines and other minor stuff. Signed-off-by:
-
Fabio Aiuto authored
remove unneeded loop over multiple spatial streams as phy only works on 1 spatial stream. Removed commented code, removed condition always satisfied, beautified comments. Signed-off-by:
-
Fabio Aiuto authored
remove code related to MCS index from 8 to 31 for rtl8723bs works only with index from 0 to 7 and index 32. Signed-off-by:
-
Larry Finger authored
In routine c2h_wk_callback(() following a kmalloc() call, the error recovery is flawed. If the kmalloc() returns a pointer that is not NULL, and the following c2h_evt_read() fails, the code will leak that buffer. If the kmalloc() fails, a NULL dereference will occur in the following code. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Link: https://lore.kernel.org/r/20210806213235.22349-1-Larry.Finger@lwfinger.netSigned-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Adjust memcpy() destination to be the named structure itself, rather than the first member, allowing memcpy() to correctly reason about the size. "objdump -d" shows no object code changes. Cc: Ross Schmidt <ross.schm.dev@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: devel@driverdev.osuosl.org Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210806201422.2871679-1-keescook@chromium.orgSigned-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Split the 3 addr memcpy() into 3 memcpy() calls so the compiler doesn't think an overflowing memcpy() happens against the addr1 field (the neighbors are intended to be copied as well). ieee80211_read_qos_param_element() copies a struct ieee80211_info_element into a struct ieee80211_qos_information_element, but is actually wanting to copy into the larger struct ieee80211_qos_parameter_info (the contents of ac_params_record[] is later examined). Refactor the routine to perform centralized checks, and copy the entire contents directly (since the id and len members match the elementID and length members): struct ieee80211_info_element { u8 id; u8 len; u8 data[]; } __packed; struct ieee80211_qos_information_element { u8 elementID; u8 length; u8 qui[QOS_OUI_LEN]; u8 qui_type; u8 qui_subtype; u8 version; u8 ac_info; } __packed; struct ieee80211_qos_parameter_info { struct ieee80211_qos_information_element info_element; u8 reserved; struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM]; } __packed; Additionally replace old-style zero-element arrays with flexible arrays. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Pascal Terjan <pterjan@google.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: devel@driverdev.osuosl.org Signed-off-by: -
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Split the 3 addr memcpy() into 3 memcpy() calls so the compiler doesn't think an overflowing memcpy() happens against the addr1 field (the neighbors are intended to be copied as well). rtllib_read_qos_param_element() copies a struct rtllib_info_element into a struct rtllib_qos_information_element, but is actually wanting to copy into the larger struct rtllib_qos_parameter_info (the contents of ac_params_record[] is later examined). Refactor the routine to perform centralized checks, and copy the entire contents directly (since the id and len members match the elementID and length members): struct rtllib_info_element { u8 id; u8 len; u8 data[]; } __packed; struct rtllib_qos_information_element { u8 elementID; u8 length; u8 qui[QOS_OUI_LEN]; u8 qui_type; u8 qui_subtype; u8 version; u8 ac_info; } __packed; struct rtllib_qos_parameter_info { struct rtllib_qos_information_element info_element; u8 reserved; struct rtllib_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM]; } __packed; Cc: Darshan D V <darshandv10@gmail.com> Cc: Aditya Srivastava <yashsri421@gmail.com> Cc: devel@driverdev.osuosl.org Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: -
Ojaswin Mujoo authored
Add some details to the Kconfig definitions of $CONFIG_VCHIQ_CDEV and $CONFIG_BCM2835_VCHIQ to help make the motive behind the configs a bit more clear. Reviewed-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Ojaswin Mujoo <ojaswin98@gmail.com> Link: https://lore.kernel.org/r/ab88d3222088aca29a319147b50a9d1e9f0f8b81.1627925241.git.ojaswin98@gmail.comSigned-off-by:
-
Ojaswin Mujoo authored
Before $CONFIG_VCHIQ_CDEV was defined, the vchiq cdev used to be created unconditionally when CONFIG_BCM2835_VCHIQ=y. When an earlier commit introduced the new config, its default behavior was set to disabled, which might surprise some unsuspecting users. Hence, modify CONFIG_BCM2835_VCHIQ to imply CONFIG_VCHIQ_CDEV Reviewed-by:
-
- 09 Aug, 2021 1 commit
-
-
Greg Kroah-Hartman authored
We need the staging fixes in here as well. Signed-off-by:
-
- 08 Aug, 2021 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single timer fix: - Prevent a memory ordering issue in the timer expiry code which makes it possible to observe falsely that the callback has been executed already while that's not the case, which violates the guarantee of del_timer_sync()" * tag 'timers-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Move clearing of base::timer_running under base:: Lock -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single scheduler fix: - Prevent a double enqueue caused by rt_effective_prio() being invoked twice in __sched_setscheduler()" * tag 'sched-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Fix double enqueue caused by rt_effective_prio
-
