- 24 Jan, 2019 7 commits
-
-
Arnd Bergmann authored
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:368:13: error: 'dpu_plane_danger_signal_ctrl' defined but not used [-Werror=unused-function] Fixes: 7b2e7ade ("drm/msm/dpu: Make dpu_plane_danger_signal_ctrl void") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Joe Perches authored
Add a few __printf attribute specifiers to routines that could use them. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Douglas Anderson authored
The bindings for Qualcomm opp levels changed after being Acked but before landing. Thus the code in the GPU driver that was relying on the old bindings is now broken. Let's change the code to match the new bindings by adjusting the old string 'qcom,level' to the new string 'opp-level'. See the patch ("dt-bindings: opp: Introduce opp-level bindings"). NOTE: we will do additional cleanup to totally remove the string from the code and use the new dev_pm_opp_get_level() but we'll do it in a future patch. This will facilitate getting the important code fix in sooner without having to deal with cross-maintainer dependencies. This patch needs to land before the patch ("arm64: dts: sdm845: Add gpu and gmu device nodes") since if a tree contains the device tree patch but not this one you'll get a crash at bootup. Fixes: 4b565ca5 ("drm/msm: Add A6XX device support") Signed-off-by:Douglas Anderson <dianders@chromium.org> Reviewed-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
-
Rob Clark authored
Signed-off-by: -
Jordan Crouse authored
Each GPU core only uses one interrupt so we don't to look up an interrupt by name and thereby we don't need interrupt-names. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jordan Crouse authored
Every GPU core only has one interrupt so there isn't any value in looking up the interrupt by name. Remove the name (which is legacy anyway) and use platform_get_irq() instead. Signed-off-by:
-
Arnd Bergmann authored
When debugfs is disabled, but coredump is turned on, the adreno driver fails to build: drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:4: error: 'struct msm_gpu_funcs' has no member named 'show' .show = adreno_show, ^~~~ drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base') drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: error: initialization of 'void (*)(struct msm_gpu *, struct msm_gem_submit *, struct msm_file_private *)' from incompatible pointer type 'void (*)(struct msm_gpu *, struct msm_gpu_state *, struct drm_printer *)' [-Werror=incompatible-pointer-types] drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base.submit') drivers/gpu/drm/msm/adreno/a4xx_gpu.c:546:4: error: 'struct msm_gpu_funcs' has no member named 'show' drivers/gpu/drm/msm/adreno/a5xx_gpu.c:1460:4: error: 'struct msm_gpu_funcs' has no member named 'show' drivers/gpu/drm/msm/adreno/a6xx_gpu.c:769:4: error: 'struct msm_gpu_funcs' has no member named 'show' drivers/gpu/drm/msm/msm_gpu.c: In function 'msm_gpu_devcoredump_read': drivers/gpu/drm/msm/msm_gpu.c:289:12: error: 'const struct msm_gpu_funcs' has no member named 'show' Adjust the #ifdef to make it build again. Fixes: c0fec7f5 ("drm/msm/gpu: Capture the GPU state on a GPU hang") Signed-off-by:
-
- 19 Dec, 2018 1 commit
-
-
Kristian H. Kristensen authored
Prevents deadlock when fifo is full and reader closes file. Signed-off-by:
Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by:
-
- 11 Dec, 2018 32 commits
-
-
Jayant Shekhar authored
In case of msm drm bind failure, pm runtime put sync is called from dsi driver which issues an asynchronous put on mdss device. Subsequently when dpu_mdss_destroy is triggered the change will make sure to put the mdss device in suspend and clearing pending work if not scheduled. Signed-off-by:
Jayant Shekhar <jshekhar@codeaurora.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Jordan Crouse authored
Do some cleanup in the static inline functions defined in dpu_media_info.h by cleaning up gotos and unneeded local variables. v3: Added spaces between operators per Seal Paul and Sam Ravnborg Reviewed-by:
Sean Paul <sean@poorly.run> Signed-off-by:
-
Jordan Crouse authored
Remove more static inline functions that are lightly used and/or very simple and easy to build into the calling functions. v3: Fix a nit from Sean Paul v2: Removed another unused function from dpu_hw_lm.c and add back dpu_crtc_get_client_type() since there was a question regarding its usefulness. Reviewed-by:
-
Jordan Crouse authored
Do some debugfs cleanups from across the DPU driver. The DRM destroy functions will do a recursive delete on the entire debugfs node so there is no need to store dentry pointers for the debugfs files that are persistent for the life of the driver. This also means that the destroy functions can go away too. Also, use standard API functions where applicable instead of using hand written code. v3: No changes v2: Add more code; most of the dpu debugfs files should be addressed now. Reviewed-by:
-
Jordan Crouse authored
dpu_irq.c does some unneeded checks and passes control to dpu_core_irq.c The simple functions can be defined in the same file where we use them and the files and their associated hangers on can be deleted. Additionally the postinstall hook isn't used even in dpu_core_irq.c so zap that entire path. v3: No changes Reviewed-by:
-
Jordan Crouse authored
Allow the KMS operation 'irq_postinstall' to be optional so that the target display drivers don't need to define a dummy function if they don't need one. v3: No changes Reviewed-by:
-
Jordan Crouse authored
Outside of superfluous parameter checks the dpu_hw_blk_init() doesn't have any failure paths. Switch it over to be a void function and we can remove error handling paths in all the functions that call it. While we're in those functions remove unneeded initialization for a static variable. v3: No changes v2: Removed a cleanup intended for a different patch Reviewed-by:
-
Jordan Crouse authored
Remove some unused container_of() helper functions. v3: No changes v2: Retained still used helper functions in the name of readability Reviewed-by:
-
Jordan Crouse authored
The static inline function dpu_crtc_enabled() is only called once and the function that calls it in turn is only called once and the return value can be easily checked in the calling functions so collapse everything down. v3: No changes Reviewed-by:
-
Jordan Crouse authored
dpu_crtc_get_mixer_height() is only used once and the value it returns can be easily derived from the calling function. v3: No changes Reviewed-by:
-
Jordan Crouse authored
The functions in dpu_dbg.c aren't used. The two main dump functions fail after a lookup from dpu_dbg_base.reg_base_list which turns out to never be populated and once those are removed the rest of the file doesn't make any sense. v3: No changes v2: Moved some unrelated changes to another patch Reviewed-by:
-
Sean Paul authored
Each time it's called we're holding the crtc modeset lock, so it's redundant. Changes in v2: - None Reviewed-by:
Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by:
-
Sean Paul authored
It's just for debugfs output, we don't need it Changes in v2: - None Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by:
-
Sean Paul authored
Instead of assigning/clearing the crtc on vblank enable/disable, we can just assign and clear the crtc on modeset. That allows us to just toggle the encoder's vblank interrupts on vblank_enable. So why is this important? Previously the driver was using the legacy pointers to assign/clear the crtc. Legacy pointers are cleared _after_ disabling the hardware, so the legacy pointer was valid during vblank_disable, but that's not something we should rely on. Instead of relying on the core ordering the legacy pointer assignments just so, we'll assign the crtc in dpu_crtc enable/disable. This is the only place that mapping can change, so we're covered there. We're also taking advantage of drm_crtc_vblank_on/off. By using this, we ensure that vblank_enable/disable can never be called while the crtc is off (which means the assigned crtc will always be valid). As such, we don't need to use modeset locks or the crtc_lock in the vblank_enable/disable routine to be sure state is consistent. ...I think. Changes in v2: - Changed crtc check in toggle_vblank to != (Jeykumar) Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by:
-
Sean Paul authored
The drm_crtc_vblank_on/off calls in enable/disable guarantee that we won't call this function when crtc is not enabled. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
Matches dpu_crtc_enable and we'll need the old state in a future patch Changes in v2: - None Reviewed-by:
-
Sean Paul authored
The indirection of registering a callback and opaque pointer isn't reall useful when there's only one callsite. So instead of having the vblank_cb registration, just give encoder a crtc and let it directly call the vblank handler. In a later patch, we'll make use of this further. Changes in v2: - None Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by:
-
Sean Paul authored
I think the intention here was to protect the enc->crtc access, but that's insufficient to avoid enc->crtc changing. Fortunately we're already holding the modeset lock when this is called (from atomic_check), so remove the crtc_lock and add a modeset lock check. While we're at it, use the encoder mask from crtc state instead of legacy pointer. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
There are 4 times that _dpu_crtc_vblank_enable_no_lock() is called: 1- crtc enable 2- crtc disable 3- crtc vblank enable 4- crtc vblank disable When we enable or disable the crtc, we call drm_crtc_vblank_on and drm_crtc_vblank_off respectively. That will gate vblank enables and disables to only being called when the crtc is active. That means that we can just enable/disable pm runtime in crtc enable/disable. This will be beneficial in trying to eliminate blocking calls from the vblank call chain. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
Add modeset lock checks to functions that could be called outside the core atomic stack. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
It's for legacy drivers, for atomic drivers crtc->state->encoder_mask should be used to map encoder to crtc. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
This patch wraps dpu_core_perf_crtc_release_bw() with modeset locks since it digs into the state objects. Changes in v2: - None Changes in v3: - Use those nifty new DRM_MODESET_LOCK_ALL_* helpers (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Sean Paul authored
Now that runtime resume is handled in encoder, we don't need to worry about crtc_lock recursion when calling pm_runtime_(get|put). So drop the lock drops in _dpu_crtc_vblank_enable_no_lock(). Changes in v2: - None Reviewed-by:
-
Sean Paul authored
The crtc runtime resume doesn't actually operate on the crtc, but rather its encoders. The problem with this is that we need to inspect the crtc state to get the currently connected encoders. Since runtime resume isn't guaranteed to be called while holding the modeset locks (although it sometimes is), this presents a race condition. Now that we have ->enabled on the virtual encoders, and a lock to protect it, just call resume on each encoder and only restore the ones that are enabled. Changes in v2: - None Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by:
-
Sean Paul authored
Add a bool to dpu_encoder_virt to track whether the encoder is enabled or not. Repurpose the enc_lock mutex to ensure that it is consistent with the hw state. Changes in v2: - None Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by:
-
Sean Paul authored
enc_spinlock instead of enc_spin_lock. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
Now that we don't have any event handlers, remove dpu_power_handle! Changes in v2: - None Reviewed-by:
-
Sean Paul authored
It's only used in core_perf, so stick it there (and change the name to reflect that). Changes in v2: - None Reviewed-by:
-
Sean Paul authored
It's needed for struct dss_module_power, and is currently being pulled in by dpu_power_handle.h Changes in v2: - None Reviewed-by:
-
Sean Paul authored
It's unused Changes in v2: - None Reviewed-by:
-
Sean Paul authored
Instead of registering through dpu_power_handle just to get a call on runtime_resume, call the crtc function directly. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
power_events are only used for pm_runtime, and that's all handled in dpu_kms. So just call vbif_init_memtypes at the correct times. Changes in v2: - Removed obsolete comment (Jeykumar) Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Reviewed-by:
-
