Provide ability to query transport's source port.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Display in sysfs in the information about the xprt if this is a
main transport or not.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When an RPC client gets created it's first transport is special
and should be marked a main transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

In preparation of being able to change the xprt's state, add a way
to show currect state of the transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Allow to query xrpt_switch attributes. Currently showing the following
fields of the rpc_xprt_switch structure: xps_nxprts, xps_nactive,
xps_queuelen.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Allow to query transport's attributes. Currently showing following
fields of the rpc_xprt structure: state, last_used, cong, cwnd,
max_reqs, min_reqs, num_reqs, sizes of queues binding, sending,
pending, backlog.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Allow to query and set the destination's address of a transport.
Setting of the destination address is allowed only for TCP or RDMA
based connections.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Add individual transport directories under each transport switch
group. For instance, for each nconnect=X connections there will be
a transport directory. Naming conventions also identifies transport
type -- xprt-<id>-<type> where type is udp, tcp, rdma, local, bc.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

An rpc client uses a transport switch and one ore more transports
associated with that switch. Since transports are shared among
rpc clients, create a symlink into the xprt_switch directory
instead of duplicating entries under each rpc client.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Add xprt_switch directory to the sysfs and create individual
xprt_swith subdirectories for multipath transport group.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

We need to keep track of the type for a given transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

This is used to uniquely identify sunrpc multipath objects in /sys.
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

This adds a unique identifier for a sunrpc transport in sysfs, which is
similarly managed to the unique IDs of clients.
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

These will eventually have files placed under them for sysfs operations.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

For network namespace separation.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

This is where we'll put per-rpc_client related files
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Merge tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Correct buffer copying when peeking events

 - Sync cpufeatures/disabled-features.h header with the kernel sources

* tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  tools headers cpufeatures: Sync with the kernel sources
  perf session: Correct buffer copying when peeking events

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable fixes:

   - Fix use-after-free in nfs4_init_client()

  Bugfixes:

   - Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()

   - Fix second deadlock in nfs4_evict_inode()

   - nfs4_proc_set_acl should not change the value of NFS_CAP_UIDGID_NOMAP

   - Fix setting of the NFS_CAP_SECURITY_LABEL capability"

* tag 'nfs-for-5.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Fix second deadlock in nfs4_evict_inode()
  NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()
  NFS: FMODE_READ and friends are C macros, not enum types
  NFS: Fix a potential NULL dereference in nfs_get_client()
  NFS: Fix use-after-free in nfs4_init_client()
  NFS: Ensure the NFS_CAP_SECURITY_LABEL capability is set when appropriate
  NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.

Pull SCSI fixes from James Bottomley:
 "Four reasonably small fixes to the core for scsi host allocation
  failure paths.

  The root problem is that we're not freeing the memory allocated by
  dev_set_name(), which involves a rejig of may of the free on error
  paths to do put_device() instead of kfree which, in turn, has several
  other knock on ramifications and inspection turned up a few other
  lurking bugs"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: core: Only put parent device if host state differs from SHOST_CREATED
  scsi: core: Put .shost_dev in failure path if host state changes to RUNNING
  scsi: core: Fix failure handling of scsi_add_host_with_dma()
  scsi: core: Fix error handling of scsi_host_alloc()

Pull RISC-V fixes from Palmer Dabbelt:

 - A pair of XIP fixes: one to fix alternatives, and one to turn off the
   rest of the features that require code modification

 - A fix to a type that was causing some alternatives to break

 - A build fix for BUILTIN_DTB

* tag 'riscv-for-linus-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix BUILTIN_DTB for sifive and microchip soc
  riscv: alternative: fix typo in macro name
  riscv: code patching only works on !XIP_KERNEL
  riscv: xip: support runtime trap patching

0day robot reported a 9.2% regression for will-it-scale mmap1 test
case[1], caused by commit 57efa1fe ("mm/gup: prevent gup_fast from
racing with COW during fork").

Further debug shows the regression is due to that commit changes the
offset of hot fields 'mmap_lock' inside structure 'mm_struct', thus some
cache alignment changes.

From the perf data, the contention for 'mmap_lock' is very severe and
takes around 95% cpu cycles, and it is a rw_semaphore

        struct rw_semaphore {
                atomic_long_t count;	/* 8 bytes */
                atomic_long_t owner;	/* 8 bytes */
                struct optimistic_spin_queue osq; /* spinner MCS lock */
                ...

Before commit 57efa1fe adds the 'write_protect_seq', it happens to
have a very optimal cache alignment layout, as Linus explained:

 "and before the addition of the 'write_protect_seq' field, the
  mmap_sem was at offset 120 in 'struct mm_struct'.

  Which meant that count and owner were in two different cachelines,
  and then when you have contention and spend time in
  rwsem_down_write_slowpath(), this is probably *exactly* the kind
  of layout you want.

  Because first the rwsem_write_trylock() will do a cmpxchg on the
  first cacheline (for the optimistic fast-path), and then in the
  case of contention, rwsem_down_write_slowpath() will just access
  the second cacheline.

  Which is probably just optimal for a load that spends a lot of
  time contended - new waiters touch that first cacheline, and then
  they queue themselves up on the second cacheline."

After the commit, the rw_semaphore is at offset 128, which means the
'count' and 'owner' fields are now in the same cacheline, and causes
more cache bouncing.

Currently there are 3 "#ifdef CONFIG_XXX" before 'mmap_lock' which will
affect its offset:

  CONFIG_MMU
  CONFIG_MEMBARRIER
  CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES

The layout above is on 64 bits system with 0day's default kernel config
(similar to RHEL-8.3's config), in which all these 3 options are 'y'.
And the layout can vary with different kernel configs.

Relayouting a structure is usually a double-edged sword, as sometimes it
can helps one case, but hurt other cases.  For this case, one solution
is, as the newly added 'write_protect_seq' is a 4 bytes long seqcount_t
(when CONFIG_DEBUG_LOCK_ALLOC=n), placing it into an existing 4 bytes
hole in 'mm_struct' will not change other fields' alignment, while
restoring the regression.

Link: https://lore.kernel.org/lkml/20210525031636.GB7744@xsang-OptiPlex-9020/ [1]
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull USB fixes from Greg KH:
 "Here are a number of tiny USB fixes for 5.13-rc6.

  There are more than I would normally like, but there's been a bunch of
  people banging on the gadget and dwc3 and typec code recently for I
  think an Android release, which has resulted in a number of small
  fixes. It's nice to see companies send fixes upstream for this type of
  work, a notable change from years ago.

  Anyway, fixes in here are:

   - usb-serial device id updates

   - usb-serial cp210x driver fixes for broken firmware versions

   - typec fixes for crazy charging devices and other reported problems

   - dwc3 fixes for reported problems found

   - gadget fixes for reported problems

   - tiny xhci fixes

   - other small fixes for reported issues.

   - revert of a problem fix found by linux-next testing

  All of these have passed 0-day and linux-next testing with no reported
  problems (the revert for the found linux-next build problem included)"

* tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (44 commits)
  Revert "usb: gadget: fsl: Re-enable driver for ARM SoCs"
  usb: typec: mux: Fix copy-paste mistake in typec_mux_match
  usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path
  usb: gadget: fsl: Re-enable driver for ARM SoCs
  usb: typec: wcove: Use LE to CPU conversion when accessing msg->header
  USB: serial: cp210x: fix CP2102N-A01 modem control
  USB: serial: cp210x: fix alternate function for CP2102N QFN20
  usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource()
  usb: dwc3: ep0: fix NULL pointer exception
  usb: gadget: eem: fix wrong eem header operation
  usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put()
  usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()
  usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()
  usb: typec: tcpm: Do not finish VDM AMS for retrying Responses
  usb: fix various gadget panics on 10gbps cabling
  usb: fix various gadgets null ptr deref on 10gbps cabling.
  usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir
  usb: f_ncm: only first packet of aggregate needs to start timer
  USB: f_ncm: ncm_bitrate (speed) is unsigned
  MAINTAINERS: usb: add entry for isp1760
  ...

Pull serial driver fix from Greg KH:
 "A single 8250_exar serial driver fix for a reported problem with a
  change that happened in 5.13-rc1.

  It has been in linux-next with no reported problems"

* tag 'tty-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_exar: Avoid NULL pointer dereference at ->exit()

Pull staging driver fixes from Greg KH:
 "Two tiny staging driver fixes:

   - ralink-gdma driver authorship information fixed up

   - rtl8723bs driver fix for reported regression

  Both have been in linux-next for a while with no reported problems"

* tag 'staging-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ralink-gdma: Remove incorrect author information
  staging: rtl8723bs: Fix uninitialized variables

Merge tag 'driver-core-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "A single debugfs fix for 5.13-rc6, fixing a bug in
  debugfs_read_file_str() that showed up in 5.13-rc1.

  It has been in linux-next for a full week with no
  reported problems"

* tag 'driver-core-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  debugfs: Fix debugfs_read_file_str()

Pull char/misc driver fixes from Greg KH:
 "Here are some small misc driver fixes for 5.13-rc6 that fix some
  reported problems:

   - Tiny phy driver fixes for reported issues

   - rtsx regression for when the device suspended

   - mhi driver fix for a use-after-free

  All of these have been in linux-next for a few days with no reported
  issues"

* tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG
  bus: mhi: pci-generic: Fix hibernation
  bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()
  bus: mhi: pci_generic: T99W175: update channel name from AT to DUN
  phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource()
  phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable
  phy: ti: Fix an error code in wiz_probe()
  phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()
  phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe()
  phy: usb: Fix misuse of IS_ENABLED

Pull pin control fixes from Linus Walleij:

 - Fix some documentation warnings for Allwinner

 - Fix duplicated GPIO groups on Qualcomm SDX55

 - Fix a double enablement bug in the Ralink driver

 - Fix the Qualcomm SC8180x Kconfig so the driver can be selected.

* tag 'pinctrl-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: Make it possible to select SC8180x TLMM
  pinctrl: ralink: rt2880: avoid to error in calls is pin is already enabled
  pinctrl: qcom: Fix duplication in gpio_groups
  pinctrl: aspeed: Fix minor documentation error

Pull block fixes from Jens Axboe:
 "A few fixes that should go into 5.13:

   - Fix a regression deadlock introduced in this release between open
     and remove of a bdev (Christoph)

   - Fix an async_xor md regression in this release (Xiao)

   - Fix bcache oversized read issue (Coly)"

* tag 'block-5.13-2021-06-12' of git://git.kernel.dk/linux-block:
  block: loop: fix deadlock between open and remove
  async_xor: check src_offs is not NULL before updating it
  bcache: avoid oversized read request in cache missing code path
  bcache: remove bcache device self-defined readahead

Pull io_uring fixes from Jens Axboe:
 "Just an API change for the registration changes that went into this
  release. Better to get it sorted out now than before it's too late"

* tag 'io_uring-5.13-2021-06-12' of git://git.kernel.dk/linux-block:
  io_uring: add feature flag for rsrc tags
  io_uring: change registration/upd/rsrc tagging ABI

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes:

   - Fix performance regression caused by lack of intended batching of
     RCU callbacks by over-eager NOHZ-full code.

   - Fix cgroups related corruption of load_avg and load_sum metrics.

   - Three fixes to fix blocked load, util_sum/runnable_sum and util_est
     tracking bugs"

* tag 'sched-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix util_est UTIL_AVG_UNCHANGED handling
  sched/pelt: Ensure that *_sum is always synced with *_avg
  tick/nohz: Only check for RCU deferred wakeup on user/guest entry when needed
  sched/fair: Make sure to update tg contrib for blocked load
  sched/fair: Keep load_avg and load_sum synced

Pull perf fixes from Ingo Molnar:
 "Misc fixes:

   - Fix the NMI watchdog on ancient Intel CPUs

   - Remove a misguided, NMI-unsafe KASAN callback from the NMI-safe
     irq_work path used by perf.

   - Fix uncore events on Ice Lake servers.

   - Someone booted maxcpus=1 on an SNB-EP, and the uncore driver
     emitted warnings and was probably buggy. Fix it.

   - KCSAN found a genuine data race in the core perf code. Somewhat
     ironically the bug was introduced through a recent race fix. :-/
     In our defense, the new race window was much more narrow. Fix it"

* tag 'perf-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/nmi_watchdog: Fix old-style NMI watchdog regression on old Intel CPUs
  irq_work: Make irq_work_queue() NMI-safe again
  perf/x86/intel/uncore: Fix M2M event umask for Ice Lake server
  perf/x86/intel/uncore: Fix a kernel WARNING triggered by maxcpus=1
  perf: Fix data race between pin_count increment/decrement

Pull objtool fixes from Ingo Molnar:
 "Two objtool fixes:

   - fix a bug that corrupts the code by mistakenly rewriting
     conditional jumps

   - fix another bug generating an incorrect ELF symbol table
     during retpoline rewriting"

* tag 'objtool-urgent-2021-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Only rewrite unconditional retpoline thunk calls
  objtool: Fix .symtab_shndx handling for elf_create_undef_symbol()

Fix BUILTIN_DTB config which resulted in a dtb that was actually not
built into the Linux image: in the same manner as Canaan soc does,
create an object file from the dtb file that will get linked into the
Linux image.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Pull tracing fixes from Steven Rostedt:

 - Fix the length check in the temp buffer filter

 - Fix build failure in bootconfig tools for "fallthrough" macro

 - Fix error return of bootconfig apply_xbc() routine

* tag 'trace-v5.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Correct the length check which causes memory corruption
  ftrace: Do not blindly read the ip address in ftrace_bug()
  tools/bootconfig: Fix a build error accroding to undefined fallthrough
  tools/bootconfig: Fix error return code in apply_xbc()

Pull clang LTO fix from Kees Cook:
 "Clang 13 fixed some IR behavior for LTO, but this broke work-arounds
  used in the kernel.

  Handle changes to needed LTO flags in Clang 13 (Tor Vic)"

* tag 'clang-features-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  x86, lto: Pass -stack-alignment only on LLD < 13.0.0

Pull gpio fix from Bartosz Golaszewski:
 "Fix a shift-out-of-bounds error in gpio-wcd934x"

* tag 'gpio-fixes-for-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: wcd934x: Fix shift-out-of-bounds error

Pull drm fixes from Dave Airlie:
 "Another week of fixes, nothing too crazy, but a few all over the
  place.

  Two locking fixes in the core/ttm area, a couple of small driver fixes
  (radeon, sun4i, mcde, vc4). Then msm and amdgpu have a set of fixes
  each, mostly for smaller things, though the msm has a DSI fix for a
  black screen.

  I haven't seen any intel fixes this week so they may have a few that
  may or may not wait for next week.

  drm:
   - auth locking fix

  ttm:
   - locking fix

  amdgpu:
   - Use kvzmalloc in amdgu_bo_create
   - Use drm_dbg_kms for reporting failure to get a GEM FB
   - Fix some register offsets for Sienna Cichlid
   - Fix fall-through warning

  radeon:
   - memcpy_to/from_io fixes

  msm:
   - NULL ptr deref fix
   - CP_PROTECT reg programming fix
   - incorrect register shift fix
   - DSI blank screen fix

  sun4i:
   - hdmi output probing fix

  mcde:
   - DSI pipeline calc fix

  vc4:
   - out of bounds fix"

* tag 'drm-fixes-2021-06-11' of git://anongit.freedesktop.org/drm/drm:
  drm/msm/dsi: Stash away calculated vco frequency on recalc
  drm: Lock pointer access in drm_master_release()
  drm/mcde: Fix off by 10^3 in calculation
  drm/msm/a6xx: avoid shadow NULL reference in failure path
  drm/msm/a6xx: fix incorrectly set uavflagprd_inv field for A650
  drm/msm/a6xx: update/fix CP_PROTECT initialization
  radeon: use memcpy_to/fromio for UVD fw upload
  drm/amd/pm: Fix fall-through warning for Clang
  drm/amdgpu: Fix incorrect register offsets for Sienna Cichlid
  drm/amdgpu: Use drm_dbg_kms for reporting failure to get a GEM FB
  drm/amdgpu: switch kzalloc to kvzalloc in amdgpu_bo_create
  drm/msm: Init mm_list before accessing it for use_vram path
  drm: Fix use-after-free read in drm_getunique()
  drm/vc4: fix vc4_atomic_commit_tail() logic
  drm/ttm: fix deref of bo->ttm without holding the lock v2
  drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device

Pull devicetree fix from Rob Herring:
 "A single fix for broken media/renesas,drif.yaml binding schema"

* tag 'devicetree-fixes-for-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  media: dt-bindings: media: renesas,drif: Fix fck definition

Pull MD related fix from Song.

* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  async_xor: check src_offs is not NULL before updating it