Pull drm fixes from Dave Airlie:
 "For your Friday pull request stack, nothing astounding or shattering
  this week some exynos, some intel, some radeon fixes.  One intel fix
  for a regression somwehere back in 2.6.35 land."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms: use frac fb div on APUs
  drm/radeon: add a missing entry to encoder_names
  drm/i915: handle input/output sdvo timings separately in mode_set
  drm/i915: fix integer overflow in i915_gem_do_execbuffer()
  drm/i915: fix integer overflow in i915_gem_execbuffer2()
  drm/exynos: added missed vm area region mapping type.
  drm/exynos: fixed exynos_drm_gem_map_pages bug.
  drm/exynos: fixed duplicatd memory allocation bug.
  drm/i915: fixup load-detect on enabled, but not active pipe

Pull RCU fix from Ingo Molnar.

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Permit call_rcu() from CPU_DYING notifiers

Pull x86 fixes from Ingo Molnar.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Use x2apic physical mode based on FADT setting
  x86/mrst: Quiet sparse noise about plain integer as NULL pointer
  x86, intel_cacheinfo: Fix error return code in amd_set_l3_disable_slot()

Pull scheduler fixes from Ingo Molnar.

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix OOPS when build_sched_domains() percpu allocation fails
  sched: Fix more load-balancing fallout

Pull perf fixes from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix perf_event_for_each() to use sibling
  perf symbols: Read plt symbols from proper symtab_type binary
  tracing: Fix stacktrace of latency tracers (irqsoff and friends)
  perf tools: Add 'G' and 'H' modifiers to event parsing
  tracing: Fix regression with tracing_on
  perf tools: Drop CROSS_COMPILE from flex and bison calls
  perf report: Fix crash showing warning related to kernel maps
  tracing: Fix build breakage without CONFIG_PERF_EVENTS (again)

Pull build fixes for less mainstream architectures from Paul Gortmaker:
 "These are fixes for frv(1), blackfin(2), powerpc(1) and xtensa(4).

  Fortunately the touches are nearly all specific to files just used by
  the arch in question.  The two touches to shared/common files
  [kernel/irq/debug.h and drivers/pci/Makefile] are trivial to assess as
  no risk to anyone.

  Half of them relate to xtensa directly.  It was only when I fixed the
  last xtensa issue that I realized that the arch has been broken for a
  significant time, and isn't a specific v3.4 regression.  So if you
  wanted, we could leave xtensa lying bleeding in the street for a
  couple more weeks and queue those for 3.5.  But given they are no risk
  to anyone outside of xtensa, I figured to just leave them in.

  If you are OK with taking the xtensa fixes, then please pull to get:

   - one last implicit include uncovered by system.h that is in a file
     specific to just one powerpc defconfig.  (I'd sync'd with BenH).

   - fix an oversight in the PCI makefile where shared code wasn't being
     compiled for ARCH=frv

   - fix a missing include for GPIO in blackfin framebuffer.

   - audit and tag endif in blackfin ezkit board file, in order to find
     and fix the misplaced endif masking a block of code.

   - fix irq/debug.h choice of temporary macro names to be more internal
     so they don't conflict with names used by xtensa.

   - fix a reference to an undeclared local var in xtensa's signal.c

   - fix an implicit bug.h usage in xtensa's asm/io.h uncovered by my
     removing bug.h from kernel.h

   - fix xtensa to properly indicate it is using asm-generic/hardirq.h
     in order to resolve the link error - undefined ack_bad_irq

  The xtensa still fails final link as my latest binutils does something
  evil when ld forward-relocates unlikely() blocks, but in theory people
  who have older/valid toolchains could now use the thing."

* 'for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  xtensa: fix build fail on undefined ack_bad_irq
  blackfin: fix ifdef fustercluck in mach-bf538/boards/ezkit.c
  blackfin: fix compile error in bfin-lq035q1-fb.c
  pci: frv architecture needs generic setup-bus infrastructure
  irq: hide debug macros so they don't collide with others.
  xtensa: fix build error in xtensa/include/asm/io.h
  xtensa: fix build failure in xtensa/kernel/signal.c
  powerpc: fix system.h fallout in sysdev/scom.c [chroma_defconfig]

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: Fix up tracepoint build fallout from static key introduction.
  sh: Fix error synchronising kernel page tables

Pull security key doc update from Jeff Layton:
 "Ordinarily, I send my patches through others' trees, but David
  suggested I just send this one to you directly since it's just a
  Documentation/ update"

* 'docs-3.4' of git://git.samba.org/jlayton/linux:
  keys: update the documentation with info about "logon" keys

Seems to be more stable on certain monitors.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=48880Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

An entry for INTERNAL_VCE encoder was missing. Add it.
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From Daniel Vetter

- VGA load-detect fix. This bug seems to be as old as the load-detect code
  (2.6.30), but needs stupid userspace (upowerd trying to detect
  connectors on dpms-off outputs) to actually kill the machine. And
  obviously a machine without VGA-hotplug, otherwise we don't do load
  detect.
- 2 interger overflow fixes for unpriviledged ioctls from Xi Wang.
- Fix SDVO regression for low-res (pixelclock < 100MHz) digital outputs,
 introduce in 2.6.36.

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: handle input/output sdvo timings separately in mode_set
  drm/i915: fix integer overflow in i915_gem_do_execbuffer()
  drm/i915: fix integer overflow in i915_gem_execbuffer2()
  drm/i915: fixup load-detect on enabled, but not active pipe

Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-2.6-samsung into drm-fixes

From Inki Dae:

this patch set fixes gem allocation and mapping issue between user space and
physical memory region.

* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-2.6-samsung:
  drm/exynos: added missed vm area region mapping type.
  drm/exynos: fixed exynos_drm_gem_map_pages bug.
  drm/exynos: fixed duplicatd memory allocation bug.

With the introduction of static keys, anything using tracepoints blows up
in the following manner:

include/trace/events/oom.h:8:13: error: initializer element is not constant
include/trace/events/oom.h:8:13: error: (near initialization for '__tracepoint_oom_score_adj_update')
include/trace/events/oom.h:8:13: error: initializer element is not constant
include/trace/events/oom.h:8:13: error: (near initialization for '__tracepoint_oom_score_adj_update.key')

This is a result of the STATIC_KEY_INIT_xxx defs wrapping ATOMIC_INIT()
which on sh includes an atomic_t typecast. Given that we don't really
need the typecast for anything anymore, the simplest solution is simply
to kill off the cast.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Pull arch/tile fixes from Chris Metcalf:
 "One change fixes a platform-independent bug about environment var
  handling in the boot command line.  The other is a trivial
  tile-specific bug fix to avoid a link-time warning."

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: fix a couple of functions that should be __init
  init: fix bug where environment vars can't be passed via boot args

Pull infiniband fixes from Roland Dreier:
 "A few fixes for regressions introduced in 3.4-rc1:
   - fix memory leak in mlx4
   - fix two problems with new MAD response generation code"

* tag 'ib-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx4: Fix memory leaks in ib_link_query_port()
  IB/mad: Don't send response for failed MADs
  IB/mad: Set 'D' bit in response for unhandled MADs

Commit e520c410

    "xtensa: convert to asm-generic/hardirq.h"

converted over to using the asm-generic parts, but it also
added the sentinel

	#define ack_bad_irq ack_bad_irq

which tells asm-generic to _not_ use the common ack_bad_irq.

Since e520c410 deleted the duplicated code from the arch specific
file, we _do_ want the asm-generic one in scope.  So delete
the trigger define above which hides it.  In doing so we'll
realize that we've got to delete the almost-duplicate prototype
as well to avoid "static declaration ... follows non-static".

Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Pull [GIT PULL] slave-dmaengine fixes from Vinod Koul.

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine/amba-pl08x : reset phychan_hold on terminate all
  dma: pl330: fix a couple of compilation warnings
  dma/ste_dma40: fix erroneous comparison
  dma/ste_dma40: explicitly include regulator consumer header
  dma40: Improve the logic of stopping logical chan
  dmaengine: at_hdmac: remove clear-on-read in atc_dostart()
  dma: mxs-dma: enable channel in device_issue_pending call
  dmaengine: imx-dma: dont complete descriptor for cyclic dma

Pull sound fixes from Takashi Iwai:
 "A workaround for an ASUS laptop and a few ASoC changes; most of the
  commits are tagged for stable, too."

* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm8994: Improve sequencing of AIF channel enables
  ALSA: HDA: Add external mic quirk for Asus Zenbook UX31E
  ASoC: fsi: update for dmaengine prep_slave_sg fallout.
  ASoC: core: Fix card RTD count for deferred probe.
  ASoC: cs42l73: don't use negative array index
  ASoC: dapm: Ensure power gets managed for line widgets

Pull a watchdog fix from Wim Van Sebroeck:
 "It will fix the size when reading or writing to WD Timer port 0x72 in
  the hpwdt driver."

* git://www.linux-watchdog.org/linux-watchdog:
  hpwdt: Only BYTE reads/writes to WD Timer port 0x72

Pull timer fixes from Thomas Gleixner.

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick: Fix the spurious broadcast timer ticks after resume
  tick: Ensure that the broadcast device is initialized
  tick: Fix oneshot broadcast setup really

Merge fixes from Andrew Morton:
 "13 fixes.  The acerhdf patches aren't (really) fixes.  But they've
  been stuck in my tree for up to two years, sent to Matthew multiple
  times and the developers are unhappy."

* emailed from Andrew Morton <akpm@linux-foundation.org>: (13 patches)
  mm: fix NULL ptr dereference in move_pages
  mm: fix NULL ptr dereference in migrate_pages
  revert "proc: clear_refs: do not clear reserved pages"
  drivers/rtc/rtc-ds1307.c: fix BUG shown with lock debugging enabled
  arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo file
  hugetlbfs: lockdep annotate root inode properly
  acerhdf: lowered default temp fanon/fanoff values
  acerhdf: add support for new hardware
  acerhdf: add support for Aspire 1410 BIOS v1.3314
  fs/buffer.c: remove BUG() in possible but rare condition
  mm: fix up the vmscan stat in vmstat
  epoll: clear the tfile_check_list on -ELOOP
  mm/hugetlb: fix warning in alloc_huge_page/dequeue_huge_page_vma

This file has lots and lots of ifdef, around structure decls
and structure usages.  The failure issue was that we would
build the BF538-EZKIT_defconfig and get:

 arch/blackfin/mach-bf538/boards/ezkit.c:924:3: error: 'bfin_lq035q1_device'
 undeclared here (not in a function)

even though the same ifdef _appeared_ to enable both the struct
declaration and the code that used it.  Yet cpp was telling us we
didn't have the struct, but we still had the usage of it.

However, _appeared_ is the operative word.  After marking all the
anonymous #endif with their parent #ifdef config options, it was
_then_ clear that there was a misplaced #endif that was hiding
the struct declaration.

The real guts of the patch boils down to this:

-#endif
+#endif /* CONFIG_MTD_M25P80 */
+#endif /* CONFIG_SPI_BFIN5XX */
 [...]
-#endif  /* spi master and devices */

but since I had to tag the #endif with their respective #ifdef
options to find this misplaced SPI endif, it would be silly to
then go and delete them all.  So they stay.

Cc: Sonic Zhang <sonic.zhang@analog.com>
Cc: Bob Liu <lliubbo@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

This file has an implicit dependency on GPIO stuff, showing
up as the following build failure:

drivers/video/bfin-lq035q1-fb.c:369:6: error: 'GPIOF_OUT_INIT_LOW' undeclared

Other more global bfin build issues prevent an automated bisect, but
it really doesn't matter - simply add in the appropriate header.

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Otherwise we get this link failure for frv's defconfig:

   LD      .tmp_vmlinux1
 drivers/built-in.o: In function `pci_assign_resource':
 (.text+0xbf0c): undefined reference to `pci_cardbus_resource_alignment'
 drivers/built-in.o: In function `pci_setup':
 pci.c:(.init.text+0x174): undefined reference to `pci_realloc_get_opt'
 pci.c:(.init.text+0x1a0): undefined reference to `pci_realloc_get_opt'
 make[1]: *** [.tmp_vmlinux1] Error 1

Cc: David Howells <dhowells@redhat.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

We seem to have a decent confusion between the output timings and the
input timings of the sdvo encoder. If I understand the code correctly,
we use the original mode unchanged for the output timings, safe for
the lvds case. And we should use the adjusted mode for input timings.

Clarify the situation by adding an explicit output_dtd to the sdvo
mode_set function and streamline the code-flow by moving the input and
output mode setting in the sdvo encode together.

Furthermore testing showed that the sdvo input timing needs the
unadjusted dotclock, the sdvo chip will automatically compute the
required pixel multiplier to get a dotclock above 100 MHz.

Fix this up when converting a drm mode to an sdvo dtd.

This regression was introduced in

commit c74696b9
Author: Pavel Roskin <proski@gnu.org>
Date:   Thu Sep 2 14:46:34 2010 -0400

    i915: revert some checks added by commit 32aad86f

particularly the following hunk:

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c
b/drivers/gpu/drm/i915/intel_sdvo.c
index 093e914..62d22ae 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1122,11 +1123,9 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,

     /* We have tried to get input timing in mode_fixup, and filled into
        adjusted_mode */
-    if (intel_sdvo->is_tv || intel_sdvo->is_lvds) {
-        intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
+    intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
+    if (intel_sdvo->is_tv || intel_sdvo->is_lvds)
         input_dtd.part2.sdvo_flags = intel_sdvo->sdvo_flags;
-    } else
-        intel_sdvo_get_dtd_from_mode(&input_dtd, mode);

     /* If it's a TV, we already set the output timing in mode_fixup.
      * Otherwise, the output timing is equal to the input timing.

Due to questions raised in review, below a more elaborate analysis of
the bug at hand:

Sdvo seems to have two timings, one is the output timing which will be
sent over whatever is connected on the other side of the sdvo chip (panel,
hdmi screen, tv), the other is the input timing which will be generated by
the gmch pipe. It looks like sdvo is expected to scale between the two.

To make things slightly more complicated, we have a bunch of special
cases:
- For lvds panel we always use a fixed output timing, namely
  intel_sdvo->sdvo_lvds_fixed_mode, hence that special case.
- Sdvo has an interface to generate a preferred input timing for a given
  output timing. This is the confusing thing that I've tried to clear up
  with the follow-on patches.
- A special requirement is that the input pixel clock needs to be between
  100MHz and 200MHz (likely to keep it within the electromechanical design
  range of PCIe), 270MHz on later gen4+. Lower pixel clocks are
  doubled/quadrupled.

The thing this patch tries to fix is that the pipe needs to be
explicitly instructed to double/quadruple the pixels and needs the
correspondingly higher pixel clock, whereas the sdvo adaptor seems to
do that itself and needs the unadjusted pixel clock. For the sdvo
encode side we already set the pixel mutliplier with a different
command (0x21).

This patch tries to fix this mess by:
- Keeping the output mode timing in the unadjusted plain mode, safe
  for the lvds case.
- Storing the input timing in the adjusted_mode with the adjusted
  pixel clock. This way we don't need to frob around with the core
  crtc mode set code.
- Fixing up the pixelclock when constructing the sdvo dtd timing
  struct. This is why the first hunk of the patch is an integral part
  of the series.
- Dropping the is_tv special case because input_dtd is equivalent to
  adjusted_mode after these changes. Follow-up patches clear this up
  further (by simply ripping out intel_sdvo->input_dtd because it's
  not needed).

v2: Extend commit message with an in-depth bug analysis.
Reported-and-Tested-by: Bernard Blackham <b-linuxgit@largestprime.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48157Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This patch is to correct the use of the iLO port 0x72 usage.
The port 0x72 is a byte size write/read and hpwdt is currently
writing a WORD.

Signed-off by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

In perf_event_for_each() we call a function on an event, and then
iterate over the siblings of the event.

However we don't call the function on the siblings, we call it
repeatedly on the original event - it seems "obvious" that we should
be calling it with sibling as the argument.

It looks like this broke in commit 75f937f2 ("Fix ctx->mutex
vs counter->mutex inversion").

The only effect of the bug is that the PERF_IOC_FLAG_GROUP parameter
to the ioctls doesn't work.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1334109253-31329-1-git-send-email-michael@ellerman.id.auSigned-off-by: Ingo Molnar <mingo@kernel.org>

Under extreme memory used up situations, percpu allocation
might fail. We hit it when system goes to suspend-to-ram,
causing a kworker panic:

 EIP: [<c124411a>] build_sched_domains+0x23a/0xad0
 Kernel panic - not syncing: Fatal exception
 Pid: 3026, comm: kworker/u:3
 3.0.8-137473-gf42fbef #1

 Call Trace:
  [<c18cc4f2>] panic+0x66/0x16c
  [...]
  [<c1244c37>] partition_sched_domains+0x287/0x4b0
  [<c12a77be>] cpuset_update_active_cpus+0x1fe/0x210
  [<c123712d>] cpuset_cpu_inactive+0x1d/0x30
  [...]

With this fix applied build_sched_domains() will return -ENOMEM and
the suspend attempt fails.
Signed-off-by: he, bo <bo.he@intel.com>
Reviewed-by: Zhang, Yanmin <yanmin.zhang@intel.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/1335355161.5892.17.camel@hebo
[ So, we fail to deallocate a CPU because we cannot allocate RAM :-/
  I don't like that kind of sad behavior but nevertheless it should
  not crash under high memory load. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Commits 367456c7 ("sched: Ditch per cgroup task lists for
load-balancing") and 5d6523eb ("sched: Fix load-balance wreckage")
left some more wreckage.

By setting loop_max unconditionally to ->nr_running load-balancing
could take a lot of time on very long runqueues (hackbench!). So keep
the sysctl as max limit of the amount of tasks we'll iterate.

Furthermore, the min load filter for migration completely fails with
cgroups since inequality in per-cpu state can easily lead to such
small loads :/

Furthermore the change to add new tasks to the tail of the queue
instead of the head seems to have some effect.. not quite sure I
understand why.

Combined these fixes solve the huge hackbench regression reported by
Tim when hackbench is ran in a cgroup.
Reported-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1335365763.28150.267.camel@twins
[ got rid of the CONFIG_PREEMPT tuning and made small readability edits ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull NFS client bugfixes from Trond Myklebust:
 - Fix NFSv4 infinite loops on open(O_TRUNC)
 - Fix an Oops and an infinite loop in the NFSv4 flock code
 - Don't register the PipeFS filesystem until it has been set up
 - Fix an Oops in nfs_try_to_update_request
 - Don't reuse NFSv4 open owners: fixes a bad sequence id storm.

* tag 'nfs-for-3.4-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Keep dropped state owners on the LRU list for a while
  NFSv4: Ensure that we don't drop a state owner more than once
  NFSv4: Ensure we do not reuse open owner names
  nfs: Enclose hostname in brackets when needed in nfs_do_root_mount
  NFS: put open context on error in nfs_flush_multi
  NFS: put open context on error in nfs_pagein_multi
  NFSv4: Fix open(O_TRUNC) and ftruncate() error handling
  NFSv4: Ensure that we check lock exclusive/shared type against open modes
  NFSv4: Ensure that the LOCK code sets exception->inode
  NFS: check for req==NULL in nfs_try_to_update_request cleanup
  SUNRPC: register PipeFS file system after pernet sybsystem

Pull x86 fixes from H. Peter Anvin.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x32, siginfo: Provide proper overrides for x32 siginfo_t
  asm-generic: Allow overriding clock_t and add attributes to siginfo_t
  x32: Check __ILP32__ instead of __LP64__ for x32
  x86, acpi: Call acpi_enter_sleep_state via an asmlinkage C function from assembler
  ACPI: Convert wake_sleep_flags to a value instead of function
  x86, apic: APIC code touches invalid MSR on P5 class machines
  i387: ptrace breaks the lazy-fpu-restore logic
  x86/platform: Remove incorrect error message in x86_default_fixup_cpu_id()
  x86, efi: Add dedicated EFI stub entry point
  x86/amd: Remove broken links from comment and kernel message
  x86, microcode: Ensure that module is only loaded on supported AMD CPUs
  x86, microcode: Fix sysfs warning during module unload on unsupported CPUs

Pull x86 platform driver fixes from Matthew Garrett:
 "One annoyance fix (make intel_ips stop complaining unnecessarily) and
  one oops fix (unterminated list in dell-laptop).  Both have been in
  -next for a while with no complaints."

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  dell-laptop: Terminate quirks list properly
  intel_ips: Hush the i915 symbols message

Commit 3268c63e ("mm: fix move/migrate_pages() race on task struct") has
added an odd construct where 'mm' is checked for being NULL, and if it is,
it would get dereferenced anyways by mput()ing it.
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 3268c63e ("mm: fix move/migrate_pages() race on task struct") has
added an odd construct where 'mm' is checked for being NULL, and if it is,
it would get dereferenced anyways by mput()ing it.

This would lead to the following NULL ptr deref and BUG() when calling
migrate_pages() with a pid that has no mm struct:

[25904.193704] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
[25904.194235] IP: [<ffffffff810b0de7>] mmput+0x27/0xf0
[25904.194235] PGD 773e6067 PUD 77da0067 PMD 0
[25904.194235] Oops: 0002 [#1] PREEMPT SMP
[25904.194235] CPU 2
[25904.194235] Pid: 31608, comm: trinity Tainted: G        W    3.4.0-rc2-next-20120412-sasha #69
[25904.194235] RIP: 0010:[<ffffffff810b0de7>]  [<ffffffff810b0de7>] mmput+0x27/0xf0
[25904.194235] RSP: 0018:ffff880077d49e08  EFLAGS: 00010202
[25904.194235] RAX: 0000000000000286 RBX: 0000000000000000 RCX: 0000000000000000
[25904.194235] RDX: ffff880075ef8000 RSI: 000000000000023d RDI: 0000000000000286
[25904.194235] RBP: ffff880077d49e18 R08: 0000000000000001 R09: 0000000000000001
[25904.194235] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[25904.194235] R13: 00000000ffffffea R14: ffff880034287740 R15: ffff8800218d3010
[25904.194235] FS:  00007fc8b244c700(0000) GS:ffff880029800000(0000) knlGS:0000000000000000
[25904.194235] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[25904.194235] CR2: 0000000000000050 CR3: 00000000767c6000 CR4: 00000000000406e0
[25904.194235] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[25904.194235] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[25904.194235] Process trinity (pid: 31608, threadinfo ffff880077d48000, task ffff880075ef8000)
[25904.194235] Stack:
[25904.194235]  ffff8800342876c0 0000000000000000 ffff880077d49f78 ffffffff811b8020
[25904.194235]  ffffffff811b7d91 ffff880075ef8000 ffff88002256d200 0000000000000000
[25904.194235]  00000000000003ff 0000000000000000 0000000000000000 0000000000000000
[25904.194235] Call Trace:
[25904.194235]  [<ffffffff811b8020>] sys_migrate_pages+0x340/0x3a0
[25904.194235]  [<ffffffff811b7d91>] ? sys_migrate_pages+0xb1/0x3a0
[25904.194235]  [<ffffffff8266cbb9>] system_call_fastpath+0x16/0x1b
[25904.194235] Code: c9 c3 66 90 55 31 d2 48 89 e5 be 3d 02 00 00 48 83 ec 10 48 89 1c 24 4c 89 64 24 08 48 89 fb 48 c7 c7 cf 0e e1 82 e8 69 18 03 00 <f0> ff 4b 50 0f 94 c0 84 c0 0f 84 aa 00 00 00 48 89 df e8 72 f1
[25904.194235] RIP  [<ffffffff810b0de7>] mmput+0x27/0xf0
[25904.194235]  RSP <ffff880077d49e08>
[25904.194235] CR2: 0000000000000050
[25904.348999] ---[ end trace a307b3ed40206b4b ]---
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert commit 85e72aa5 ("proc: clear_refs: do not clear reserved
pages"), which was a quick fix suitable for -stable until ARM had been
moved over to the gate_vma mechanism:

https://lkml.org/lkml/2012/1/14/55

With commit f9d4861f ("ARM: 7294/1: vectors: use gate_vma for vectors user
mapping"), ARM does now use the gate_vma, so the PageReserved check can be
removed from the proc code.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Nicolas Pitre <nico@linaro.org>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add struct bin_attribute initialization to fix the following bug:

rtc-ds1307 3-0068: rtc core: registered ds1307 as rtc0
BUG: key cfb14fcc not in .data!
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:2986 sysfs_add_file_mode+0x84/0xdc()
Modules linked in:
[<c0018d94>] (unwind_backtrace+0x0/0xf8) from [<c0031f7c>] (warn_slowpath_common+0x4c/0x64)
[<c0031f7c>] (warn_slowpath_common+0x4c/0x64) from [<c0031fb0>] (warn_slowpath_null+0x1c/0x24)
[<c0031fb0>] (warn_slowpath_null+0x1c/0x24) from [<c012f7ac>] (sysfs_add_file_mode+0x84/0xdc)
[<c012f7ac>] (sysfs_add_file_mode+0x84/0xdc) from [<c04b11e4>] (ds1307_probe+0x5e4/0x6ac)
[<c04b11e4>] (ds1307_probe+0x5e4/0x6ac) from [<c036e600>] (i2c_device_probe+0xdc/0x108)
[<c036e600>] (i2c_device_probe+0xdc/0x108) from [<c02cdf84>] (driver_probe_device+0x90/0x210)
[<c02cdf84>] (driver_probe_device+0x90/0x210) from [<c02ce198>] (__driver_attach+0x94/0x98)
[<c02ce198>] (__driver_attach+0x94/0x98) from [<c02cc824>] (bus_for_each_dev+0x50/0x7c)
[<c02cc824>] (bus_for_each_dev+0x50/0x7c) from [<c02cd780>] (bus_add_driver+0x184/0x244)
[<c02cd780>] (bus_add_driver+0x184/0x244) from [<c02ce43c>] (driver_register+0x78/0x12c)
[<c02ce43c>] (driver_register+0x78/0x12c) from [<c03701ac>] (i2c_register_driver+0x2c/0xb4)
[<c03701ac>] (i2c_register_driver+0x2c/0xb4) from [<c0008798>] (do_one_initcall+0x34/0x178)
[<c0008798>] (do_one_initcall+0x34/0x178) from [<c0691860>] (kernel_init+0xdc/0x194)
[<c0691860>] (kernel_init+0xdc/0x194) from [<c0013cf0>] (kernel_thread_exit+0x0/0x8)

Since commit 6992f533 ("sysfs: Use one lockdep class per sysfs
attribute") this initialization is required.
Reported-by: Stefano Babic <sbabic@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Don't allow everybody to use a modem.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes the below reported false lockdep warning.  e096d0c7
("lockdep: Add helper function for dir vs file i_mutex annotation") added
a similar annotation for every other inode in hugetlbfs but missed the
root inode because it was allocated by a separate function.

For HugeTLB fs we allow taking i_mutex in mmap.  HugeTLB fs doesn't
support file write and its file read callback is modified in a05b0855
("hugetlbfs: avoid taking i_mutex from hugetlbfs_read()") to not take
i_mutex.  Hence for HugeTLB fs with regular files we really don't take
i_mutex with mmap_sem held.

 ======================================================
 [ INFO: possible circular locking dependency detected ]
 3.4.0-rc1+ #322 Not tainted
 -------------------------------------------------------
 bash/1572 is trying to acquire lock:
  (&mm->mmap_sem){++++++}, at: [<ffffffff810f1618>] might_fault+0x40/0x90

 but task is already holding lock:
  (&sb->s_type->i_mutex_key#12){+.+.+.}, at: [<ffffffff81125f88>] vfs_readdir+0x56/0xa8

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&sb->s_type->i_mutex_key#12){+.+.+.}:
        [<ffffffff810a09e5>] lock_acquire+0xd5/0xfa
        [<ffffffff816a2f5e>] __mutex_lock_common+0x48/0x350
        [<ffffffff816a3325>] mutex_lock_nested+0x2a/0x31
        [<ffffffff811fb8e1>] hugetlbfs_file_mmap+0x7d/0x104
        [<ffffffff810f859a>] mmap_region+0x272/0x47d
        [<ffffffff810f8a39>] do_mmap_pgoff+0x294/0x2ee
        [<ffffffff810f8b65>] sys_mmap_pgoff+0xd2/0x10e
        [<ffffffff8103d19e>] sys_mmap+0x1d/0x1f
        [<ffffffff816a5922>] system_call_fastpath+0x16/0x1b

 -> #0 (&mm->mmap_sem){++++++}:
        [<ffffffff810a0256>] __lock_acquire+0xa81/0xd75
        [<ffffffff810a09e5>] lock_acquire+0xd5/0xfa
        [<ffffffff810f1645>] might_fault+0x6d/0x90
        [<ffffffff81125d62>] filldir+0x6a/0xc2
        [<ffffffff81133a83>] dcache_readdir+0x5c/0x222
        [<ffffffff81125fa8>] vfs_readdir+0x76/0xa8
        [<ffffffff811260b6>] sys_getdents+0x79/0xc9
        [<ffffffff816a5922>] system_call_fastpath+0x16/0x1b

 other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&sb->s_type->i_mutex_key#12);
                                lock(&mm->mmap_sem);
                                lock(&sb->s_type->i_mutex_key#12);
   lock(&mm->mmap_sem);

  *** DEADLOCK ***

 1 lock held by bash/1572:
  #0:  (&sb->s_type->i_mutex_key#12){+.+.+.}, at: [<ffffffff81125f88>] vfs_readdir+0x56/0xa8

 stack backtrace:
 Pid: 1572, comm: bash Not tainted 3.4.0-rc1+ #322
 Call Trace:
  [<ffffffff81699a3c>] print_circular_bug+0x1f8/0x209
  [<ffffffff810a0256>] __lock_acquire+0xa81/0xd75
  [<ffffffff810f38aa>] ? handle_pte_fault+0x5ff/0x614
  [<ffffffff8109e622>] ? mark_lock+0x2d/0x258
  [<ffffffff810f1618>] ? might_fault+0x40/0x90
  [<ffffffff810a09e5>] lock_acquire+0xd5/0xfa
  [<ffffffff810f1618>] ? might_fault+0x40/0x90
  [<ffffffff816a3249>] ? __mutex_lock_common+0x333/0x350
  [<ffffffff810f1645>] might_fault+0x6d/0x90
  [<ffffffff810f1618>] ? might_fault+0x40/0x90
  [<ffffffff81125d62>] filldir+0x6a/0xc2
  [<ffffffff81133a83>] dcache_readdir+0x5c/0x222
  [<ffffffff81125cf8>] ? sys_ioctl+0x74/0x74
  [<ffffffff81125cf8>] ? sys_ioctl+0x74/0x74
  [<ffffffff81125cf8>] ? sys_ioctl+0x74/0x74
  [<ffffffff81125fa8>] vfs_readdir+0x76/0xa8
  [<ffffffff811260b6>] sys_getdents+0x79/0xc9
  [<ffffffff816a5922>] system_call_fastpath+0x16/0x1b
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Due to new supported hardware, of which the actual temperature limits of
processor, harddisk and other components are unknown, it feels safer with
lower fanon / fanoff settings.

It won't change much for most people, already using acerhdf, as they use
their own fanon/fanoff variable settings when loading the module.

Furthermore seems like kernel and userspace tools have been improved to
work more efficient and netbooks don't get so hot anymore.
Signed-off-by: Peter Feuerer <peter@piie.net>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>