- 11 Jun, 2021 1 commit
-
-
Tian Tao authored
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle to avoid continuing to increase the refcount when pm_runtime_get_sync fails. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
- 10 Jun, 2021 5 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.14-2021-06-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.14-2021-06-09: amdgpu: - SR-IOV fixes - Smartshift updates - GPUVM TLB flush updates - 16bpc fixed point display fix for DCE11 - BACO cleanups and core refactoring - Aldebaran updates - Initial Yellow Carp support - RAS fixes - PM API cleanup - DC visual confirm updates - DC DP MST fixes - DC DML fixes - Misc code cleanups and bug fixes amdkfd: - Initial Yellow Carp support radeon: - memcpy_to/from_io fixes UAPI: - Add Yellow Carp chip family id Used internally in the kernel driver and by mesa Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210610031649.4006-1-alexander.deucher@amd.com
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Cross-subsystem Changes: - x86/gpu: add JasperLake to gen11 early quirks (Although the patch lacks the Ack info, it has been Acked by Borislav) Driver Changes: - General DMC improves (Anusha) - More ADL-P enabling (Vandita, Matt, Jose, Mika, Anusha, Imre, Lucas, Jani, Manasi, Ville, Stanislav) - Introduce MBUS relative dbuf offset (Ville) - PSR fixes and improvements (Gwan, Jose, Ville) - Re-enable LTTPR non-transparent LT mode for DPCD_REV < 1.4 (Ville) - Remove duplicated declarations (Shaokun, Wan) - Check HDMI sink deep color capabilities during .mode_valid (Ville) - Fix display flicker screan related to console and FBC (Chris) - Remaining conversions of GRAPHICS_VER (Lucas) - Drop invalid FIXME (Jose) - Fix bigjoiner check in dsc_disable (Vandita) Signed-off-by:
-
Dave Airlie authored
This fixes 32-bit arm build due to lack of 64-bit divides. Fixes: cb1c8146 ("drm/ttm: flip the switch for driver allocated resources v2") Link: https://patchwork.freedesktop.org/patch/438442/Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
Drop disabling of gfxoff during VCN use. This allows gfxoff to kick in and potentially save power if the user is not using gfx for color space conversion or scaling. VCN1.0 had a bug which prevented it from working properly with gfxoff, so we disabled it while using VCN. That said, most apps today use gfx for scaling and color space conversion rather than overlay planes so it was generally in use anyway. This was fixed on VCN2+, but since we mostly use gfx for color space conversion and scaling and rapidly powering up/down gfx can negate the advantages of gfxoff, we left gfxoff disabled. As more applications use overlay planes for color space conversion and scaling, this starts to be a win, so go ahead and leave gfxoff enabled. Note that VCN1.0 uses vcn_v1_0_idle_work_handler() and vcn_v1_0_ring_begin_use() so they are not affected by this patch. Reviewed-by:
James Zhu <James.Zhu@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Boyuan Zhang <Boyuan.Zhang@amd.com> Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.14: UAPI Changes: * drm/panfrost: Export AFBC_FEATURES register to userspace Cross-subsystem Changes: * dma-buf: Fix debug printing; Rename dma_resv_*() functions + changes in callers; Cleanups Core Changes: * Add prefetching memcpy for WC * Avoid circular dependency on CONFIG_FB * Cleanups * Documentation fixes throughout DRM * ttm: Make struct ttm_resource the base of all managers + changes in all users of TTM; Add a generic memcpy for page-based iomem; Remove use of VM_MIXEDMAP; Cleanups Driver Changes: * drm/bridge: Add TI SN65DSI83 and SN65DSI84 + DT bindings * drm/hyperv: Add DRM driver for HyperV graphics output * drm/msm: Fix module dependencies * drm/panel: KD53T133: Support rotation * drm/pl111: Fix module dependencies * drm/qxl: Fixes * drm/stm: Cleanups * drm/sun4i: Be explicit about format modifiers * drm/vc4: Use struct gpio_desc; Cleanups * drm/vgem: Cleanups * drm/vmwgfx: Use ttm_bo_move_null() if there's nothing to copy * fbdev/mach64: Cleanups * fbdev/mb862xx: Use DEVICE_ATTR_RO Signed-off-by:
-
- 09 Jun, 2021 5 commits
-
-
Stanislav Lisovskiy authored
We currently treat same slice mask as a same DBuf state and skip updating the Dbuf slices, if we detect that. This is wrong as if we have a multi to single pipe change or vice versa, that would be treated as a same Dbuf state and thus no changes required, so we don't get Mbus updated, causing issues. Solution: check also mbus_join, in addition to slices mask. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210527110106.21434-1-stanislav.lisovskiy@intel.com
-
Stanislav Lisovskiy authored
CDCLK crawl feature allows to change CDCLK frequency without disabling the actual PLL and doesn't require a full modeset. v2: - Added has_cdclk_crawl as a feature flag to intel_device_info(Matt Roper) - s/gen13_cdclk_pll_crawl/adlp_cdclk_pll_crawl/ (Matt Roper) Cc: Mika Kahola <mika.kahola@intel.com> Reviewed-by:Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
-
Vandita Kulkarni authored
This change takes care of resetting the dss_ctl registers in case of dsc_disable, bigjoiner disable and also uncompressed joiner disable. v2: Fix formatting v3: Fix the typo (Mansi) Suggested-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210609065914.4454-1-vandita.kulkarni@intel.com
-
Nirmoy Das authored
Use ttm_bo_move_null() instead of ttm_bo_assign_mem(). Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
-
Colin Ian King authored
The object surf is not fully initialized and the uninitialized field surf.data is being copied by the call to qxl_bo_create via the call to qxl_gem_object_create. Set surf.data to zero to ensure garbage data from the stack is not being copied. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: f64122c1 ("drm: add new QXL driver. (v1.4)") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210608161313.161922-1-colin.king@canonical.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
- 08 Jun, 2021 29 commits
-
-
Ville Syrjälä authored
AUX logic is often clocked from cdclk. Disable PSR to make sure there are no hw initiated AUX transactions in flight while we change the cdclk frequency. Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608085415.515342-2-gwan-gyeong.mun@intel.com
-
Gwan-gyeong Mun authored
This introduces the following function that can exit and activate a psr source when intel_psr is already enabled. - intel_psr_pause(): Pause current PSR. It deactivates current psr state. - intel_psr_resume(): Resume paused PSR. It activates paused psr state. v2: Address Jose's review comment. - Remove unneeded changes around the intel_psr_enable(). - Add intel_psr_post_exit() which processes waiting until PSR is idle and WA for SelectiveFetch. v3: Address Jose's review comment. - Rename intel_psr_post_exit() to intel_psr_wait_exit_locked(). - Move WA_1408330847 to intel_psr_disable_locked() - If the PSR is paused by an explicit intel_psr_paused() call, make the intel_psr_flush() not to activate PSR. v4: Address Jose's review comment. - In order to avoid the scenario of PSR is not active but there is a scheduled psr->work, it changes the check routine of intel_psr_pause() for PSR's enablement from "psr->active" to "psr->enable". Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Marek Vasut authored
There is not much value in the extra conversion step, the calculations required for the LTDC IP are different than what is used in the drm_display_mode_to_videomode(), so just do the right ones in the LTDC driver right away. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Antonio Borneo <antonio.borneo@foss.st.com> Cc: Benjamin Gaignard <benjamin.gaignard@foss.st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Philippe Cornu <philippe.cornu@foss.st.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Vincent Abriou <vincent.abriou@foss.st.com> Cc: Yannick Fertre <yannick.fertre@foss.st.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com To: dri-devel@lists.freedesktop.org Tested-by:
Yannick Fertré <yannick.fertre@st.com> Signed-off-by:
Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210607172457.14471-1-marex@denx.de
-
Rohit Khaire authored
This is similar to IH_RB_CNTL programming in navi10_ih_toggle_ring_interrupts Signed-off-by:
Rohit Khaire <rohit.khaire@amd.com> Acked-by:
Horace Chen <horace.chen@amd.com> Signed-off-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Stylon Wang <stylon.wang@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Wyatt Wood authored
Signed-off-by:
Wyatt Wood <wyatt.wood@amd.com> Reviewed-by:
-
Po-Ting Chen authored
[Why] To support a new visual confirm mode: swizzle to show the specific color at the screen border according to different surface swizzle mode. Currently we only support the Linear mode with red color. Signed-off-by:
Po-Ting Chen <robin.chen@amd.com> Acked-by:
-
Dingchen (David) Zhang authored
[WHY] - Commit from userspace could cause link stream to disable and hdcp auth to reset when the HDCP has already been enabled at the moment. CP should fall back to DESIRED from ENABLED in such cases. - This change was previously reverted due to a regression caused, which has now been cleared. [HOW] In hdcp display removal, change CP to DESIRED if at the moment CP is ENABLED before the auth reset and removal of linked list element. Signed-off-by:
Dingchen (David) Zhang <dingchen.zhang@amd.com> Signed-off-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by:
-
Eric Bernstein authored
[Why] There is an assert in cases where transition from ODM 2:1 to ODM 1:1 (bypass) [How] Remove assert since this case is now valid. Update diags tests for ODM transitions. Signed-off-by:
Eric Bernstein <eric.bernstein@amd.com> Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Roy Chan authored
[Why] Found a use case (IPKVM) that DP-VGA active dongle does not return any EDID and the mentioned commit broke it. [How] This reverts "Disconnect non-DP with no EDID" Signed-off-by:
Roy Chan <roy.chan@amd.com> Reviewed-by:
Chris Park <Chris.Park@amd.com> Acked-by:
-
Fangzhi Zuo authored
[Why & How] Add debugfs entry to force dsc decoding at PCON when DSC capable external RX is connected. In such case, it is free to test DSC decoding at external RX or at PCON. Signed-off-by:
Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by:
Hersen Wu <hersenxs.wu@amd.com> Acked-by:
-
Aric Cyr authored
[Why] When calculating recout width for an MPO plane on a mode that's using ODM combine, driver can calculate a negative value, resulting in a crash. [How] For negative widths, use zero such that validation will prune the configuration correctly and disallow MPO. Signed-off-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by:
-
Wesley Chalmers authored
[WHY] For DCN30 and later, there is no data in DML arrays indexed by state at index num_states. Signed-off-by:
Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by:
-
Wesley Chalmers authored
[WHY] DISPCLK_MAX_ERRDET_CYCLES must be 7 to prevent connection loss when changing DENTIST_DISPCLK_WDIVIDER from 126 to 127 and back. Signed-off-by:
-
Wesley Chalmers authored
[WHY] HW has handed down a new sequence that requires access to these registers. v2: squash in DCN3.1 fixes (Alex) Signed-off-by:
-
Wesley Chalmers authored
[WHY] HW has handed down a new sequence which requires access to the FIFO ERRDET SW Override register. Signed-off-by:
-
Aric Cyr authored
Signed-off-by:
-
Anthony Koo authored
Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Aric Cyr authored
[Why] Rearranging pipes with multiple displays and multiple planes cannot be done atomically and requires a much improved sequence to deal with it. [How] To workaround such issues, prefer avoid pipe-split policy for multidisplay scenarios. Signed-off-by:
-
Vladimir Stempen authored
[why] When OS overrides training link training parameters for MST device to SST mode, MST resources are not released and leak of the resource may result crash and incorrect MST discovery during following hot plugs. [how] Retaining sink object to be reused by SST link and releasing MST resources. Signed-off-by:
Vladimir Stempen <vladimir.stempen@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
Mikita Lipski authored
[why] Allow specifying which panel to take PSR Residency measurements from. [how] Pass panel instance to DMUB through GPINT in the upper 8 bits of the parameter. Signed-off-by:
Mikita Lipski <mikita.lipski@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
-
Jayendran Ramani authored
[How] Add call to get the last used VTOTAL from DC Signed-off-by:
Jayendran Ramani <Jayendran.Ramani@amd.com> Reviewed-by:
-
Meenakshikumar Somasundaram authored
[Why & How] SET_CONFIG transactions with DMUB is not used and removed. Signed-off-by:
Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Roman Li authored
[Why] We update scaling settings when scaling mode has been changed. However when changing mode from native resolution the scaling mode previously set gets ignored. [How] Perform scaling settings update on modeset. Signed-off-by:
Roman Li <roman.li@amd.com> Reviewed-by:
-
Jimmy Kizito authored
[Why & How] Add support for transmitting training pattern sequences for links whose encoders have been dynamically assigned. Signed-off-by:
Jimmy Kizito <Jimmy.Kizito@amd.com> Reviewed-by:
-
Jimmy Kizito authored
[Why & How] Add functionality useful for DP equalization phase of link training to public interface. Signed-off-by:
-
Ilya Bakoulin authored
[Why] This change was found to break some high-refresh modes. Reverting to unblock mainline. Signed-off-by:
Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by:
Sung Lee <Sung.Lee@amd.com> Acked-by:
-
Evgenii Krasnikov authored
[WHY] Currently there is no way to visually identify if there is one or more layers presented fullscreen on the display [HOW] Add new visual confirm colors in get_surface_visual_confirm_color for planes with layer_index > 0 Signed-off-by:
Evgenii Krasnikov <Evgenii.Krasnikov@amd.com> Reviewed-by:
-
Wyatt Wood authored
[Why + How] Visual confirm has no asic-specific logic, so we can refactor and unify these functions that are currently spread out across multiple dcn files. Add a new hw sequencer interface update_visual_confirm_color, and a new mpc function pointer set_bg_color. This will allow visual confirm to updated independently of MPCC blending updates. v2: squash in DCN3.1 fixes Signed-off-by:
-
