- 29 Jul, 2020 2 commits
-
-
Suman Anna authored
Add a new helper function rproc_of_parse_firmware() to the remoteproc core that can be used by various remoteproc drivers to look up the the "firmware-name" property from a rproc device node. This property is already being used by multiple drivers, so this helper can avoid repeating equivalent code in remoteproc drivers. Signed-off-by:
Suman Anna <s-anna@ti.com> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200721223617.20312-3-s-anna@ti.comSigned-off-by:
-
Suman Anna authored
Add a bindings document that defines the common TI SCI properties used by various K3 device management nodes such as clock controllers, interrupt controllers, reset controllers or remoteproc devices. The required properties for each device management node shall be specified in the respective binding document. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 28 Jul, 2020 5 commits
-
-
Sibi Sankar authored
Remove the redundant running state, as an equivalent is maintained in the common q6v5 resource handling helpers. Reviewed-by:
Evan Green <evgreen@chromium.org> Signed-off-by:
Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200602163257.26978-2-sibis@codeaurora.orgSigned-off-by:
-
Sibi Sankar authored
Sometimes the stop triggers a watchdog rather than a stop-ack. Update the running state to false on requesting stop to skip the watchdog instead. Error Logs: $ echo stop > /sys/class/remoteproc/remoteproc0/state ipa 1e40000.ipa: received modem stopping event remoteproc-modem: watchdog received: sys_m_smsm_mpss.c:291:APPS force stop qcom-q6v5-mss 4080000.remoteproc-modem: port failed halt ipa 1e40000.ipa: received modem offline event remoteproc0: stopped remote processor 4080000.remoteproc-modem Reviewed-by:
-
Sibi Sankar authored
Add modem debug policy support which will enable coredumps and live debug support when the msadp firmware is present on secure devices. Reviewed-by:
-
Sibi Sankar authored
The following mem abort is observed when one of the modem blob firmware size exceeds the allocated mpss region. Fix this by restricting the copy size to segment size using request_firmware_into_buf before load. Err Logs: Unable to handle kernel paging request at virtual address Mem abort info: ... Call trace: __memcpy+0x110/0x180 rproc_start+0xd0/0x190 rproc_boot+0x404/0x550 state_store+0x54/0xf8 dev_attr_store+0x44/0x60 sysfs_kf_write+0x58/0x80 kernfs_fop_write+0x140/0x230 vfs_write+0xc4/0x208 ksys_write+0x74/0xf8 ... Reviewed-by:
-
Sibi Sankar authored
The following mem abort is observed when the mba firmware size exceeds the allocated mba region. MBA firmware size is restricted to a maximum size of 1M and remaining memory region is used by modem debug policy firmware when available. Hence verify whether the MBA firmware size lies within the allocated memory region and is not greater than 1M before loading. Err Logs: Unable to handle kernel paging request at virtual address Mem abort info: ... Call trace: __memcpy+0x110/0x180 rproc_start+0x40/0x218 rproc_boot+0x5b4/0x608 state_store+0x54/0xf8 dev_attr_store+0x44/0x60 sysfs_kf_write+0x58/0x80 kernfs_fop_write+0x140/0x230 vfs_write+0xc4/0x208 ksys_write+0x74/0xf8 __arm64_sys_write+0x24/0x30 ... Reviewed-by:
-
- 22 Jul, 2020 2 commits
-
-
Guennadi Liakhovetski authored
rpmsg_create_ept() takes struct rpmsg_channel_info chinfo as its last argument, not a u32 value. The first two arguments are also updated. Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
-
Sibi Sankar authored
On SC7180 the MBA firmware stores the bootup text logs in a 4K segment at the beginning of the MBA region. Add support to extract the logs which will be useful to debug mba boot/authentication issues. Reviewed-by:
-
- 21 Jul, 2020 5 commits
-
-
Rishabh Bhatnagar authored
Add coredump debugfs entry to configure the type of dump that will be collected during recovery. User can select between default or inline coredump functionality. Also coredump collection can be disabled through this interface. This functionality can be configured differently for different remote processors. Signed-off-by:
Rishabh Bhatnagar <rishabhb@codeaurora.org> Reviewed-by:
-
Rishabh Bhatnagar authored
The current coredump implementation uses vmalloc area to copy all the segments. But this might put strain on low memory targets as the firmware size sometimes is in tens of MBs. The situation becomes worse if there are multiple remote processors undergoing recovery at the same time. This patch adds inline coredump functionality that avoids extra memory usage. This requires recovery to be halted until data is read by userspace and free function is called. Reviewed-by:
-
Rishabh Bhatnagar authored
Change the segment dump API signature to include size and offset arguments. Refactor the qcom_q6v5_mss driver to use these arguments while copying the segment. Doing this lays the ground work for "inline" coredump functionality being added in the next patch. Tested-by:
-
Sibi Sankar authored
In order to land inline coredump support for mss, the dump_segment function would need to support granularities less than the segment size. This is achieved by replacing mask based tracking with size. Reviewed-by:
-
Rishabh Bhatnagar authored
Move all coredump functionality to an individual file. This is being done so that the current functionality can be extended in future patchsets. Signed-off-by:
-
- 18 Jul, 2020 11 commits
-
-
Mathieu Poirier authored
Update the co-processor state in function stm32_rproc_stop() so that it can be used in scenarios where the remoteproc core is attaching to the M4. Mainly based on the work published by Arnaud Pouliquen [1]. [1]. https://patchwork.kernel.org/project/linux-remoteproc/list/?series=239877Acked-by:
Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by:
-
Mathieu Poirier authored
Introduce new attach function to be used when attaching to a remote processor. Mainly based on the work published by Arnaud Pouliquen [1]. [1]. https://patchwork.kernel.org/project/linux-remoteproc/list/?series=239877Acked-by:
-
Mathieu Poirier authored
Properly set the remote processor's resource table based on where it was loaded by the external entity when attaching to a remote processor. Mainly based on the work published by Arnaud Pouliquen [1]. [1]. https://patchwork.kernel.org/project/linux-remoteproc/list/?series=239877Acked-by:
-
Mathieu Poirier authored
Split function stm32_rproc_parse_fw() in two parts, the first one to parse the memory regions and the second one to load the resource table. That way parsing of the memory regions can be done without having do deal with the resource table when attaching to a remote processor. Mainly based on the work published by Arnaud Pouliquen [1]. [1]. https://patchwork.kernel.org/project/linux-remoteproc/list/?series=239877Acked-by:
-
Mathieu Poirier authored
Make function rproc_resource_cleanup() public so that it can be used by platform drivers when allocating resources to be used by a detached remote processor. Acked-by:
-
Mathieu Poirier authored
Introduce the required mechanic to set the state of the M4 in order to properly deal with scenarios where the co-processor has been started by another entity. Mainly based on the work published by Arnaud Pouliquen [1]. [1]. https://patchwork.kernel.org/project/linux-remoteproc/list/?series=239877Acked-by:
-
Mathieu Poirier authored
Get from the DT the syncon to probe the state of the remote processor and the location of the resource table. Mainly based on the work published by Arnaud Pouliquen [1]. [1]. https://patchwork.kernel.org/project/linux-remoteproc/list/?series=239877Acked-by:
Loic Pallardy <loic.pallardy@st.com> Reviewed-by:
-
Mathieu Poirier authored
Other than one has to be done after the other, there is no correlation between memory translation and DT parsing. As such move function stm32_rproc_of_memory_translations() to stm32_rproc_probe() so that stm32_rproc_parse_dt() can be extended to look for attach bindings in a clean way. Acked-by:
-
Mathieu Poirier authored
Remove the remote processor from the process of parsing the device tree since (1) there is no correlation between them and (2) to use the information that was gathered to make a decision on whether to synchronise with the M4 or not. Acked-by:
-
Mathieu Poirier authored
Request IRQ with platform device rather than remote proc in order to call stm32_rproc_parse_dt() before rproc_alloc(). That way we can know whether we need to synchronise with the MCU or not. Acked-by:
-
Mathieu Poirier authored
Remove the remote processor from the process of parsing the memory ranges since there is no correlation between them. Acked-by:
-
- 17 Jul, 2020 11 commits
-
-
Mathieu Poirier authored
This patch prevents the firmware image name from being displayed when the remoteproc core is attaching to a remote processor. This is needed needed since there is no guarantee about the nature of the firmware image that is loaded by the external entity. Signed-off-by:
-
Mathieu Poirier authored
When function rproc_free_vring() clears the virtio device section it does so on the cached resource table rather than the one installed in the remote processor memory. When a remote processor has been booted by another entity there is no need to use a cached table and as such, no need to clear the virtio device section in it. Signed-off-by:
-
Mathieu Poirier authored
Refactor function rproc_trigger_auto_boot() to properly deal with scenarios where the remoteproc core needs to attach with a remote processor that has already been booted by an external entity. Signed-off-by:
-
Mathieu Poirier authored
Refactor function rproc_boot() to properly deal with scenarios where the remoteproc core needs to attach with a remote processor that has already been booted by an external entity. Signed-off-by:
-
Mathieu Poirier authored
Add a new function to assert the general health of the remote processor before handing it to the remoteproc core. Signed-off-by:
-
Mathieu Poirier authored
Introduce function rproc_actuate() that provides the same functionatlity as rproc_fw_boot(), but without the steps that involve interaction with the firmware image. That way we can deal with scenarios where the remoteproc core is attaching to a remote processor that has already been started by another entity. Signed-off-by:
-
Mathieu Poirier authored
Introducing function rproc_attach() to enact the same actions as rproc_start(), but without the steps related to the handling of a firmware image. That way we can properly deal with scenarios where the remoteproc core needs to attach with a remote processsor that has been booted by another entity. Signed-off-by:
-
Mathieu Poirier authored
Add an new attach() operation in order to properly deal with scenarios where the remoteproc core needs to attach to a remote processor that has been booted by another entity. Signed-off-by:
-
Mathieu Poirier authored
Add a new RPROC_DETACHED state to take into account scenarios where the remoteproc core needs to attach to a remote processor that is booted by another entity. Signed-off-by:
-
Sibi Sankar authored
On secure devices there exists a race condition which could lock the MSS CONFIG AHB bus thus preventing access to BOOT_STATUS register during SSR. Switch to polling the MSS_STATUS register with an additional 10 us delay to reliably track boot completion. Signed-off-by:
-
Bjorn Andersson authored
On platforms with 32-bit phys_addr_t the shift to get the upper word of the base address of the memory region is invalid. Cast the base to 64 bit to resolv this. Fixes: 549b67da ("remoteproc: qcom: Introduce helper to store pil info in IMEM") Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build Reported-by:
Lee Jones <lee.jones@linaro.org> Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20200716054817.157608-1-bjorn.andersson@linaro.orgSigned-off-by:
-
- 15 Jul, 2020 2 commits
-
-
Lee Jones authored
Looks as though 'name' has now been moved into 'struct sysmod_event' which is passed in instead. However, the parameter descriptions were not updated at the same time. Let's do that now. Fixes the following W=1 kernel build warning(s): drivers/remoteproc/qcom_sysmon.c:78: warning: Function parameter or member 'event' not described in 'sysmon_send_event' drivers/remoteproc/qcom_sysmon.c:78: warning: Excess function parameter 'name' description in 'sysmon_send_event' drivers/remoteproc/qcom_sysmon.c:350: warning: Function parameter or member 'event' not described in 'ssctl_send_event' drivers/remoteproc/qcom_sysmon.c:350: warning: Excess function parameter 'name' description in 'ssctl_send_event' Cc: Andy Gross <agross@kernel.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/remoteproc/remoteproc_core.c: In function ‘rproc_find_carveout_by_name’: drivers/remoteproc/remoteproc_core.c:257:2: warning: function ‘rproc_find_carveout_by_name’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] 257 | vsnprintf(_name, sizeof(_name), name, args); | ^~~~~~~~~ drivers/remoteproc/remoteproc_core.c: In function ‘rproc_mem_entry_init’: drivers/remoteproc/remoteproc_core.c:993:2: warning: function ‘rproc_mem_entry_init’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] 993 | vsnprintf(mem->name, sizeof(mem->name), name, args); | ^~~~~~~~~ drivers/remoteproc/remoteproc_core.c: In function ‘rproc_of_resm_mem_entry_init’: drivers/remoteproc/remoteproc_core.c:1029:2: warning: function ‘rproc_of_resm_mem_entry_init’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] 1029 | vsnprintf(mem->name, sizeof(mem->name), name, args); | ^~~~~~~~~ Cc: Brian Swetland <swetland@google.com> Cc: Mark Grosen <mgrosen@ti.com> Cc: Guzman Lugo <fernando.lugo@ti.com> Cc: Suman Anna <s-anna@ti.com> Cc: Robert Tivy <rtivy@ti.com> Cc: De Leon <x0095078@ti.com> Signed-off-by:
-
- 13 Jul, 2020 1 commit
-
-
Kefeng Wang authored
drivers/remoteproc/qcom_common.c: In function 'qcom_ssr_get_subsys': drivers/remoteproc/qcom_common.c:210:9: error: implicit declaration of function 'kzalloc'; did you mean 'vzalloc'? [-Werror=implicit-function-declaration] info = kzalloc(sizeof(*info), GFP_KERNEL); ^~~~~~~ vzalloc kzalloc() is declared in linux/slab.h, add include to fix build issue. Tested-by:Alex Elder <elder@linaro.org> Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Link: https://lore.kernel.org/r/20200713020003.134039-1-wangkefeng.wang@huawei.comSigned-off-by:
-
- 09 Jul, 2020 1 commit
-
-
Rishabh Bhatnagar authored
The SSR subdevice only adds callback for the unprepare event. Add callbacks for prepare, start and prepare events. The client driver for a particular remoteproc might be interested in knowing the status of the remoteproc while undergoing SSR, not just when the remoteproc has finished shutting down. Reviewed-by:
Siddharth Gupta <sidgup@codeaurora.org> Signed-off-by:
-
