- 09 May, 2012 14 commits
-
-
Jerome Glisse authored
Directly use the suballocator to get small chunks of memory. It's equally fast and doesn't crash when we encounter a GPU reset. v2: rebased on new SA interface. Signed-off-by:
Christian König <deathsimple@vodafone.de> Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Christian König authored
A startover with a new idea for a multiple ring allocator. Should perform as well as a normal ring allocator as long as only one ring does somthing, but falls back to a more complex algorithm if more complex things start to happen. We store the last allocated bo in last, we always try to allocate after the last allocated bo. Principle is that in a linear GPU ring progression was is after last is the oldest bo we allocated and thus the first one that should no longer be in use by the GPU. If it's not the case we skip over the bo after last to the closest done bo if such one exist. If none exist and we are not asked to block we report failure to allocate. If we are asked to block we wait on all the oldest fence of all rings. We just wait for any of those fence to complete. v2: We need to be able to let hole point to the list_head, otherwise try free will never free the first allocation of the list. Also stop calling radeon_fence_signalled more than necessary. v3: Don't free allocations without considering them as a hole, otherwise we might lose holes. Also return ENOMEM instead of ENOENT when running out of fences to wait for. Limit the number of holes we try for each ring to 3. Signed-off-by: -
Jerome Glisse authored
Use one wait queue for all rings. When one ring progress, other likely does to and we are not expecting to have a lot of waiter anyway. Also add a fence_wait_any that will wait until the first fence in the fence array (one fence per ring) is signaled. This allow to wait on all rings. v2: some minor cleanups and improvements. Signed-off-by:
-
Christian König authored
Define the interface without modifying the allocation algorithm in any way. v2: rebase on top of fence new uint64 patch v3: add ring to debugfs output Signed-off-by:
-
Christian König authored
Allocating and freeing it seperately. Signed-off-by:
-
Christian König authored
Instead of offset + size keep start and end offset directly. Signed-off-by:
-
Christian König authored
Dumping the current allocations. Signed-off-by:
-
Christian König authored
Make the suballocator self containing to locking. v2: split the bugfix into a seperate patch. v3: remove some unreleated changes. Sig-off-by:
-
Christian König authored
Instead of hacking the calculation multiple times. Signed-off-by:
-
Christian König authored
Some callers illegal called fence_wait_next/empty while holding the ring emission mutex. So don't relock the mutex in that cases, and move the actual locking into the fence code. v2: Don't try to unlock the mutex if it isn't locked. Signed-off-by:
-
Jerome Glisse authored
Using 64bits fence sequence we can directly compare sequence number to know if a fence is signaled or not. Thus the fence list became useless, so does the fence lock that mainly protected the fence list. Things like ring.ready are no longer behind a lock, this should be ok as ring.ready is initialized once and will only change when facing lockup. Worst case is that we return an -EBUSY just after a successfull GPU reset, or we go into wait state instead of returning -EBUSY (thus delaying reporting -EBUSY to fence wait caller). v2: Remove left over comment, force using writeback on cayman and newer, thus not having to suffer from possibly scratch reg exhaustion v3: Rebase on top of change to uint64 fence patch v4: Change DCE5 test to force write back on cayman and newer but also any APU such as PALM or SUMO family v5: Rebase on top of new uint64 fence patch v6: Just break if seq doesn't change any more. Use radeon_fence prefix for all function names. Even if it's now highly optimized, try avoiding polling to often. v7: We should never poll the last_seq from the hardware without waking the sleeping threads, otherwise we might lose events. Signed-off-by: -
Jerome Glisse authored
This convert fence to use uint64_t sequence number intention is to use the fact that uin64_t is big enough that we don't need to care about wrap around. Tested with and without writeback using 0xFFFFF000 as initial fence sequence and thus allowing to test the wrap around from 32bits to 64bits. v2: Add comment about possible race btw CPU & GPU, add comment stressing that we need 2 dword aligned for R600_WB_EVENT_OFFSET Read fence sequenc in reverse order of GPU write them so we mitigate the race btw CPU and GPU. v3: Drop the need for ring to emit the 64bits fence, and just have each ring emit the lower 32bits of the fence sequence. We handle the wrap over 32bits in fence_process. v4: Just a small optimization: Don't reread the last_seq value if loop restarts, since we already know its value anyway. Also start at zero not one for seq value and use pre instead of post increment in emmit, otherwise wait_empty will deadlock. Signed-off-by: -
Christian König authored
A single global mutex for ring submissions seems sufficient. Signed-off-by:
-
Jerome Glisse authored
We need to sync with the GFX ring as ttm might have schedule bo move on it and new command scheduled for other ring need to wait for bo data to be in place. Signed-off-by:
-
- 07 May, 2012 15 commits
-
-
git://people.freedesktop.org/~danvet/drm-intelDave Airlie authored
Daniel prepared this branch with a back-merge as git was getting very confused about changes in intel_display.c
-
Daniel Vetter authored
Conflicts: drivers/gpu/drm/i915/intel_display.c Ok, this is a fun story of git totally messing things up. There /shouldn't/ be any conflict in here, because the fixes in -rc6 do only touch functions that have not been changed in -next. The offending commits in drm-next are 14415745..1fa61106 which simply move a few functions from intel_display.c to intel_pm.c. The problem seems to be that git diff gets completely confused: $ git diff 14415745..1fa61106 is a nice mess in intel_display.c, and the diff leaks into totally unrelated functions, whereas $git diff --minimal 14415745..1fa61106 is exactly what we want. Unfortunately there seems to be no way to teach similar smarts to the merge diff and conflict generation code, because with the minimal diff there really shouldn't be any conflicts. For added hilarity, every time something in that area changes the + and - lines in the diff move around like crazy, again resulting in new conflicts. So I fear this mess will stay with us for a little longer (and might result in another backmerge down the road). Signed-Off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Kirill A. Shutemov authored
Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Kirill A. Shutemov authored
cc1: warning: include/drm: No such file or directory [enabled by default] It's reproducible if you build with O=/some/obj/dir and W=1. Signed-off-by:
-
Kirill A. Shutemov authored
Signed-off-by:
-
Kirill A. Shutemov authored
Signed-off-by:
-
Kirill A. Shutemov authored
This was mostly already fixed but this one change is needed to match Kirill's original submission Signed-off-by:
-
Kirill A. Shutemov authored
Signed-off-by:
-
Kirill A. Shutemov authored
Signed-off-by:
-
Kirill A. Shutemov authored
Signed-off-by:
-
Kirill A. Shutemov authored
Signed-off-by:
-
Kirill A. Shutemov authored
Signed-off-by:
-
Kirill A. Shutemov authored
Signed-off-by:
-
Alan Cox authored
We need this for Poulsbo Signed-off-by:
-
Alan Cox authored
Add the opregion support and bring us in line with the opregion functionality in the reference driver code. We can't share this with i915 currently because there are hardcoded assumptions about dev_priv etc in both versions. [airlied: include opregion.h fix] Signed-off-by:
-
- 06 May, 2012 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes form Peter Anvin * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver x86, relocs: Remove an unused variable asm-generic: Use __BITS_PER_LONG in statfs.h x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "The big ones here are a memory leak we introduced in rc1, and a scheduling while atomic if the transid on disk doesn't match the transid we expected. This happens for corrupt blocks, or out of date disks. It also fixes up the ioctl definition for our ioctl to resolve logical inode numbers. The __u32 was a merging error and doesn't match what we ship in the progs." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: avoid sleeping in verify_parent_transid while atomic Btrfs: fix crash in scrub repair code when device is missing btrfs: Fix mismatching struct members in ioctl.h Btrfs: fix page leak when allocing extent buffers Btrfs: Add properly locking around add_root_to_dirty_list
-
Al Viro authored
Setting TIF_IA32 in load_aout_binary() used to be enough; these days TASK_SIZE is controlled by TIF_ADDR32 and that one doesn't get set there. Switch to use of set_personality_ia32()... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Chris Mason authored
verify_parent_transid needs to lock the extent range to make sure no IO is underway, and so it can safely clear the uptodate bits if our checks fail. But, a few callers are using it with spinlocks held. Most of the time, the generation numbers are going to match, and we don't want to switch to a blocking lock just for the error case. This adds an atomic flag to verify_parent_transid, and changes it to return EAGAIN if it needs to block to properly verifiy things. Signed-off-by:Chris Mason <chris.mason@oracle.com>
-
- 05 May, 2012 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alphaLinus Torvalds authored
Pull alpha fixes from Matt Turner: "My alpha tree is back up (after taking quite some time to get my GPG key signed). It contains just some simple fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: silence 'const' warning in sys_marvel.c alpha: include module.h to fix modpost on Tsunami alpha: properly define get/set_rtc_time on Marvel/SMP alpha: VGA_HOSE depends on VGA_CONSOLE
-
Jiri Slaby authored
The test in pdc_console_tty_close '!tty->count' was always wrong because tty->count is decremented after tty->ops->close is called and thus can never be zero. Hence the 'then' branch was never executed and the timer never deleted. This did not matter until commit 5dd5bc40 ("TTY: pdc_cons, use tty_port"). There we needed to set TTY in tty_port to NULL, but this never happened due to the bug above. So change the test to really trigger at the last close by changing the condition to 'tty->count == 1'. Well, the driver should not touch tty->count at all. It should use tty_port->count and count open count there itself. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Reported-and-tested-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound sound fixes from Takashi Iwai: "As good as nothing exciting here; just a few trivial fixes for various ASoC stuff." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: omap-pcm: Free dma buffers in case of error. ASoC: s3c2412-i2s: Fix dai registration ASoC: wm8350: Don't use locally allocated codec struct ASoC: tlv312aic23: unbreak resume ASoC: bf5xx-ssm2602: Set DAI format ASoC: core: check of_property_count_strings failure ASoC: dt: sgtl5000.txt: Add description for 'reg' field ASoC: wm_hubs: Make sure we don't disable differential line outputs
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull an ACPI patch from Len Brown: "It fixes a D3 issue new in 3.4-rc1." By Lin Ming via Len Brown: * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: ACPI: Fix D3hot v D3cold confusion
-
Sasha Levin authored
Currently, we'll try mounting any device who's major device number is UNNAMED_MAJOR as NFS root. This would happen for non-NFS devices as well (such as 9p devices) but it wouldn't cause any issues since mounting the device as NFS would fail quickly and the code proceeded to doing the proper mount: [ 101.522716] VFS: Unable to mount root fs via NFS, trying floppy. [ 101.534499] VFS: Mounted root (9p filesystem) on device 0:18. Commit 6829a048102a ("NFS: Retry mounting NFSROOT") introduced retries when mounting NFS root, which means that now we don't immediately fail and instead it takes an additional 90+ seconds until we stop retrying, which has revealed the issue this patch fixes. This meant that it would take an additional 90 seconds to boot when we're not using a device type which gets detected in order before NFS. This patch modifies the NFS type check to require device type to be 'Root_NFS' instead of requiring the device to have an UNNAMED_MAJOR major. This makes boot process cleaner since we now won't go through the NFS mounting code at all when the device isn't an NFS root ("/dev/nfs"). Signed-off-by:Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
-
Takashi Iwai authored
-
