- 06 Feb, 2013 3 commits
-
-
James Hogan authored
Getting the tty kref in dashtty_timer() is no longer necessary since it isn't needed in fetch_data() any longer (due to changes which make the tty flip functions refer to tty_ports instead of tty_structs), so just pass around a channel number instead. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Acked-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Hogan authored
Add a TTY driver for communicating over a Meta DA (Debug Adapter) channel using the bios channel SWITCH operation. Signed-off-by:
-
Stephen Rothwell authored
This was caused by commit 16559ae4 ("kgdb: remove #include <linux/serial_8250.h> from kgdb.h") from the tty tree. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
- 05 Feb, 2013 5 commits
-
-
Fabio Estevam authored
If CONFIG_CONSOLE_POLL is not defined, the following build warning happens: drivers/tty/serial/imx.c:274:13: warning: 'imx_port_ucrs_save' defined but not used [-Wunused-function] drivers/tty/serial/imx.c:283:13: warning: 'imx_port_ucrs_restore' defined but not used [-Wunused-function] Move imx_port_ucrs_saver/restore under CONFIG_CONSOLE_POLL ifdef block to fix it. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Tobias Klauser authored
No need for two separate return statements, consolidate them. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Tobias Klauser authored
No need for two separate return statements, consolidate them. Signed-off-by:
-
Alexey Pelykh authored
OMAP/serial: Fix incorrect Rx FIFO threshold setting, LSR validation on Tx, and Tx FIFO IRQ generation Original configuration of Rx FIFO threshold contained an error that resulted Rx threshold to be effectively set to 1 character instead of 16 characters, as noted in comments. Checking LSR to contain UART_LSR_THRE bit set caused issue when not all UART_IER_THRI interrupts have been properly handled. This caused gap in Tx data, visible on high baud rates using oscilloscope. Setting OMAP_UART_SCR_TX_EMPTY bit in SCR caused UART_IER_THRI interrupt to be raised only when Tx FIFO and Tx shift registers are empty. Signed-off-by:
Alexey Pelykh <alexey.pelykh@gmail.com> Signed-off-by:
-
Stephen Warren authored
Tegra is only booted through device-tree now; there are no board files left that use this function. Hence, don't export it. Move the static inline definition into of_serial.c, so we can delete of_serial.h too. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
- 04 Feb, 2013 8 commits
-
-
Peter Hurley authored
Multiple slave pty opens may be performed in parallel with the master open. Of course, all the slave opens will fail because the master pty is still locked but during this time the slave pty count will be artificially greater than 1. This is should not cause the master pty open to fail. Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Peter Hurley authored
If the tty driver open() fails, the tty driver close() is still called during the resultant tty release. Signed-off-by:
-
Peter Hurley authored
If the master and slave ptys are opened in parallel, the slave open fails because the pty is still locked. This is as designed. However, pty_close() is still called for the slave pty which sets TTY_OTHER_CLOSED in the master pty. This can cause the master open to fail as well. Use a common pattern in other tty drivers by setting TTY_IO_ERROR until the open is successful and only closing the pty if not set. Note: the master pty always closes regardless of whether the open was successful, so that proper cleanup can occur. Signed-off-by:
-
Peter Hurley authored
If pmtx_open() fails to get a slave inode or fails the pty_open(), the tty is released as part of the error cleanup. As evidenced by the first BUG stacktrace below, pty_close() assumes that the linked pty has a valid, initialized inode* stored in driver_data. Also, as evidenced by the second BUG stacktrace below, pty_unix98_shutdown() assumes that the master pty's driver_data has been initialized. 1) Fix the invalid assumption in pty_close(). 2) Initialize driver_data immediately so proper devpts fs cleanup occurs. Fixes this BUG: [ 815.868844] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [ 815.869018] IP: [<ffffffff81207bcc>] devpts_pty_kill+0x1c/0xa0 [ 815.869190] PGD 7c775067 PUD 79deb067 PMD 0 [ 815.869315] Oops: 0000 [#1] PREEMPT SMP [ 815.869443] Modules linked in: kvm_intel kvm snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi microcode snd_rawmidi psmouse serio_raw snd_seq_midi_event snd_seq snd_timer$ [ 815.870025] CPU 0 [ 815.870143] Pid: 27819, comm: stress_test_tty Tainted: G W 3.8.0-next-20130125+ttypatch-2-xeon #2 Bochs Bochs [ 815.870386] RIP: 0010:[<ffffffff81207bcc>] [<ffffffff81207bcc>] devpts_pty_kill+0x1c/0xa0 [ 815.870540] RSP: 0018:ffff88007d3e1ac8 EFLAGS: 00010282 [ 815.870661] RAX: ffff880079c20800 RBX: 0000000000000000 RCX: 0000000000000000 [ 815.870804] RDX: ffff880079c209a8 RSI: 0000000000000286 RDI: 0000000000000000 [ 815.870933] RBP: ffff88007d3e1ae8 R08: 0000000000000000 R09: 0000000000000000 [ 815.871078] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88007bfb7e00 [ 815.871209] R13: 0000000000000005 R14: ffff880079c20c00 R15: ffff880079c20c00 [ 815.871343] FS: 00007f2e86206700(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 815.871495] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 815.871617] CR2: 0000000000000028 CR3: 000000007ae56000 CR4: 00000000000006f0 [ 815.871752] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 815.871902] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 815.872012] Process stress_test_tty (pid: 27819, threadinfo ffff88007d3e0000, task ffff88007c874530) [ 815.872012] Stack: [ 815.872012] ffff88007bfb7e00 ffff880079c20c00 ffff88007bfb7e00 0000000000000005 [ 815.872012] ffff88007d3e1b08 ffffffff81417be7 ffff88007caa9bd8 ffff880079c20800 [ 815.872012] ffff88007d3e1bc8 ffffffff8140e5f8 0000000000000000 0000000000000000 [ 815.872012] Call Trace: [ 815.872012] [<ffffffff81417be7>] pty_close+0x157/0x170 [ 815.872012] [<ffffffff8140e5f8>] tty_release+0x138/0x580 [ 815.872012] [<ffffffff816d29f3>] ? _raw_spin_lock+0x23/0x30 [ 815.872012] [<ffffffff816d267a>] ? _raw_spin_unlock+0x1a/0x40 [ 815.872012] [<ffffffff816d0178>] ? __mutex_unlock_slowpath+0x48/0x60 [ 815.872012] [<ffffffff81417dff>] ptmx_open+0x11f/0x180 [ 815.872012] [<ffffffff8119394b>] chrdev_open+0x9b/0x1c0 [ 815.872012] [<ffffffff8118d643>] do_dentry_open+0x203/0x290 [ 815.872012] [<ffffffff811938b0>] ? cdev_put+0x30/0x30 [ 815.872012] [<ffffffff8118d705>] finish_open+0x35/0x50 [ 815.872012] [<ffffffff8119dcce>] do_last+0x6fe/0xe90 [ 815.872012] [<ffffffff8119a7af>] ? link_path_walk+0x7f/0x880 [ 815.872012] [<ffffffff810909d5>] ? cpuacct_charge+0x75/0x80 [ 815.872012] [<ffffffff8119e51c>] path_openat+0xbc/0x4e0 [ 815.872012] [<ffffffff816d0fd0>] ? __schedule+0x400/0x7f0 [ 815.872012] [<ffffffff8140e956>] ? tty_release+0x496/0x580 [ 815.872012] [<ffffffff8119ec11>] do_filp_open+0x41/0xa0 [ 815.872012] [<ffffffff816d267a>] ? _raw_spin_unlock+0x1a/0x40 [ 815.872012] [<ffffffff811abe39>] ? __alloc_fd+0xe9/0x140 [ 815.872012] [<ffffffff8118ea44>] do_sys_open+0xf4/0x1e0 [ 815.872012] [<ffffffff8118eb51>] sys_open+0x21/0x30 [ 815.872012] [<ffffffff816da499>] system_call_fastpath+0x16/0x1b [ 815.872012] Code: 0f 1f 80 00 00 00 00 45 31 e4 eb d7 0f 0b 90 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 48 89 5d e8 48 89 fb 4c 89 65 f0 4c 89 6d f8 <48> 8b 47 28 48 81 78 58 d1 1c 0$ [ 815.872012] RIP [<ffffffff81207bcc>] devpts_pty_kill+0x1c/0xa0 [ 815.872012] RSP <ffff88007d3e1ac8> [ 815.872012] CR2: 0000000000000028 [ 815.897036] ---[ end trace eadf50b7f34e47d5 ]--- Fixes this BUG also: [ 608.366836] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [ 608.366948] IP: [<ffffffff812078d8>] devpts_kill_index+0x18/0x70 [ 608.367050] PGD 7c75b067 PUD 7b919067 PMD 0 [ 608.367135] Oops: 0000 [#1] PREEMPT SMP [ 608.367201] Modules linked in: kvm_intel kvm snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event microcode snd_seq psmouse snd_timer snd_seq_device serio_raw snd mac_hid soundcore snd_page_alloc rfcomm virtio_balloon parport_pc bnep bluetooth ppdev i2c_piix4 lp parport floppy [ 608.367617] CPU 2 [ 608.367669] Pid: 1918, comm: stress_test_tty Tainted: G W 3.8.0-next-20130125+ttypatch-2-xeon #2 Bochs Bochs [ 608.367796] RIP: 0010:[<ffffffff812078d8>] [<ffffffff812078d8>] devpts_kill_index+0x18/0x70 [ 608.367885] RSP: 0018:ffff88007ae41a88 EFLAGS: 00010286 [ 608.367951] RAX: ffffffff81417e80 RBX: ffff880036472400 RCX: 0000000180400028 [ 608.368010] RDX: ffff880036470004 RSI: 0000000000000004 RDI: 0000000000000000 [ 608.368010] RBP: ffff88007ae41a98 R08: 0000000000000000 R09: 0000000000000001 [ 608.368010] R10: ffffea0001f22e40 R11: ffffffff814151d5 R12: 0000000000000004 [ 608.368010] R13: ffff880036470000 R14: 0000000000000004 R15: ffff880036472400 [ 608.368010] FS: 00007ff7a5268700(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 [ 608.368010] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 608.368010] CR2: 0000000000000028 CR3: 000000007a0fd000 CR4: 00000000000006e0 [ 608.368010] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 608.368010] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 608.368010] Process stress_test_tty (pid: 1918, threadinfo ffff88007ae40000, task ffff88003688dc40) [ 608.368010] Stack: [ 608.368010] ffff880036472400 0000000000000001 ffff88007ae41aa8 ffffffff81417e98 [ 608.368010] ffff88007ae41ac8 ffffffff8140c42b ffff88007ac73100 ffff88007ac73100 [ 608.368010] ffff88007ae41b98 ffffffff8140ead5 ffff88007ae41b38 ffff88007ca40e40 [ 608.368010] Call Trace: [ 608.368010] [<ffffffff81417e98>] pty_unix98_shutdown+0x18/0x20 [ 608.368010] [<ffffffff8140c42b>] release_tty+0x3b/0xe0 [ 608.368010] [<ffffffff8140ead5>] __tty_release+0x575/0x5d0 [ 608.368010] [<ffffffff816d2c63>] ? _raw_spin_lock+0x23/0x30 [ 608.368010] [<ffffffff816d28ea>] ? _raw_spin_unlock+0x1a/0x40 [ 608.368010] [<ffffffff816d03e8>] ? __mutex_unlock_slowpath+0x48/0x60 [ 608.368010] [<ffffffff8140ef79>] tty_open+0x449/0x5f0 [ 608.368010] [<ffffffff8119394b>] chrdev_open+0x9b/0x1c0 [ 608.368010] [<ffffffff8118d643>] do_dentry_open+0x203/0x290 [ 608.368010] [<ffffffff811938b0>] ? cdev_put+0x30/0x30 [ 608.368010] [<ffffffff8118d705>] finish_open+0x35/0x50 [ 608.368010] [<ffffffff8119dcce>] do_last+0x6fe/0xe90 [ 608.368010] [<ffffffff8119a7af>] ? link_path_walk+0x7f/0x880 [ 608.368010] [<ffffffff8119e51c>] path_openat+0xbc/0x4e0 [ 608.368010] [<ffffffff8119ec11>] do_filp_open+0x41/0xa0 [ 608.368010] [<ffffffff816d28ea>] ? _raw_spin_unlock+0x1a/0x40 [ 608.368010] [<ffffffff811abe39>] ? __alloc_fd+0xe9/0x140 [ 608.368010] [<ffffffff8118ea44>] do_sys_open+0xf4/0x1e0 [ 608.368010] [<ffffffff816d2c63>] ? _raw_spin_lock+0x23/0x30 [ 608.368010] [<ffffffff8118eb51>] sys_open+0x21/0x30 [ 608.368010] [<ffffffff816da719>] system_call_fastpath+0x16/0x1b [ 608.368010] Code: ec 48 83 c4 10 5b 41 5c 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 10 4c 89 65 f8 41 89 f4 48 89 5d f0 <48> 8b 47 28 48 81 78 58 d1 1c 00 00 74 0b 48 8b 05 4b 66 cf 00 [ 608.368010] RIP [<ffffffff812078d8>] devpts_kill_index+0x18/0x70 [ 608.368010] RSP <ffff88007ae41a88> [ 608.368010] CR2: 0000000000000028 [ 608.394153] ---[ end trace afe83b0fb5fbda93 ]--- Reported-by:
Ilya Zykov <ilya@ilyx.ru> Signed-off-by:
-
Greg Kroah-Hartman authored
There's no reason kgdb.h itself needs to include the 8250 serial port header file. So push it down to the _very_ limited number of individual drivers that need the values in that file, and fix up the places where people really wanted serial_core.h and platform_device.h. Signed-off-by: -
Michael Chan authored
It was mistakenly defined to be 24 instead of the next higher number 25. Reported-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Stephen Hurd <shurd@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Cc: stable <stable@vger.kernel.org> # 3.8 Signed-off-by:
-
Ivo Sieben authored
The "normal" spin lock that guards the N_TTY line discipline read section is replaced by a raw spin lock. On a PREEMP_RT system this prevents unwanted scheduling overhead when data is read at the same time as data is being received: while RX IRQ threaded handling is busy a TTY read call is performed from a RT priority > threaded IRQ priority. The read call tries to take the read section spin lock (held by the threaded IRQ) which blocks and causes a context switch to/from the threaded IRQ handler until the spin lock is unlocked. Signed-off-by:
Ivo Sieben <meltedpianoman@gmail.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Oleg Nesterov authored
See https://bugzilla.redhat.com/show_bug.cgi?id=904907 read command causes bash to abort with double free or corruption (out). A simple test-case from Roman: // Compile the reproducer and send sigchld ti that process. // EINTR occurs even if SA_RESTART flag is set. void handler(int sig) { } main() { struct sigaction act; act.sa_handler = handler; act.sa_flags = SA_RESTART; sigaction (SIGCHLD, &act, 0); struct termio ttp; ioctl(0, TCGETA, &ttp); while(1) { if (ioctl(0, TCSETAW, ttp) < 0) { if (errno == EINTR) { fprintf(stderr, "BUG!"); return(1); } } } } Change set_termios/set_termiox to return -ERESTARTSYS to fix this particular problem. I didn't dare to change other EINTR's in drivers/tty/, but they look equally wrong. Reported-by:
Roman Rakus <rrakus@redhat.com> Reported-by:
Lingzhu Xiang <lxiang@redhat.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
- 30 Jan, 2013 5 commits
-
-
Dirkjan Bussink authored
This change fixes a deadlock when the multiplexer is closed while there are still client side ports open. When the multiplexer is closed and there are active tty's it tries to close them with tty_vhangup. This has a problem though, because tty_vhangup needs the tty_lock. This patch changes it to unlock the tty_lock before attempting the hangup and relocks afterwards. The additional call to tty_port_tty_set is needed because otherwise the port stays active because of the reference counter. This change also exposed another problem that other code paths don't expect that the multiplexer could have been closed. This patch also adds checks for these cases in the gsmtty_ class of function that could be called. The documentation explicitly states that "first close all virtual ports before closing the physical port" but we've found this to not always reality in our field situations. The GPRS / UTMS modem sometimes crashes and needs a power cycle in that case which means cleanly shutting down everything is not always possible. This change makes it much more robust for our situation where at least the system is recoverable with this patch and doesn't hang in a deadlock situation inside the kernel. The patch is against the long term support kernel (3.4.27) and should apply cleanly to more recent branches. Tested with a Telit GE864-QUADV2 and Telit HE910 modem. Signed-off-by:
Dirkjan Bussink <dirkjan.bussink@nedap.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
John Crispin authored
The MIPS based Ralink WiSoC platform has 1 or more 8250 compatible serial cores. To make them work we require the same quirks that are used by AU1x00. Signed-off-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
-
Joe Perches authored
Dan Carpenter noticed a missing set of parentheses around a multiple field addition. https://lkml.org/lkml/2013/1/27/166 His original commit message: There is a kind of precedence problem here, but it doesn't affect how the code works because ->serial_signals is unsigned char. We want to clear two flags here. #define SerialSignal_RTS 0x20 /* Request to Send */ #define SerialSignal_DTR 0x80 /* Data Terminal Ready */ Without the parenthesis then it does: info->serial_signals &= 0x5f; With the parenthesis it does: info->serial_signals &= 0xffffff5f; info->serial_signals is an unsigned char so the two statements are equivalent, but it's cleaner to add the parenthesis. In other dtr_rts() functions the parenthesis are there so this makes it more consistent. Other changes: Convert all + uses to | for these bit operations. Reorder the multiple fields for consistency. Update the comments too. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Stephen Chivers authored
Add support for later SUNIX (TIMEDIA) Universal PCI Single and Multi-Port Communications Boards. These boards have PCI Vendor ID 1fd4 with device ID 1999 but otherwise appear to be the same as the TIMEDIA boards already supported by 8250_pci and parport_serial. Tested with: a. the two port serial board part number SER5037A, b. the two port serial and one port parallel board part number MIO5079A. Signed-off-by:
Stephen Chivers <schivers@csc.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 58f82be3. This was fixed by a previous patch already. Signed-off-by:
-
- 25 Jan, 2013 10 commits
-
-
Greg Kroah-Hartman authored
This resolves a number of tty driver merge issues found in linux-next Signed-off-by: -
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "It turns out that we had two crc bugs when running fsx-linux in a loop. Many thanks to Josef, Miao Xie, and Dave Sterba for nailing it all down. Miao also has a new OOM fix in this v2 pull as well. Ilya fixed a regression Liu Bo found in the balance ioctls for pausing and resuming a running balance across drives. Josef's orphan truncate patch fixes an obscure corruption we'd see during xfstests. Arne's patches address problems with subvolume quotas. If the user destroys quota groups incorrectly the FS will refuse to mount. The rest are smaller fixes and plugs for memory leaks." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (30 commits) Btrfs: fix repeated delalloc work allocation Btrfs: fix wrong max device number for single profile Btrfs: fix missed transaction->aborted check Btrfs: Add ACCESS_ONCE() to transaction->abort accesses Btrfs: put csums on the right ordered extent Btrfs: use right range to find checksum for compressed extents Btrfs: fix panic when recovering tree log Btrfs: do not allow logged extents to be merged or removed Btrfs: fix a regression in balance usage filter Btrfs: prevent qgroup destroy when there are still relations Btrfs: ignore orphan qgroup relations Btrfs: reorder locks and sanity checks in btrfs_ioctl_defrag Btrfs: fix unlock order in btrfs_ioctl_rm_dev Btrfs: fix unlock order in btrfs_ioctl_resize Btrfs: fix "mutually exclusive op is running" error code Btrfs: bring back balance pause/resume logic btrfs: update timestamps on truncate() btrfs: fix btrfs_cont_expand() freeing IS_ERR em Btrfs: fix a bug when llseek for delalloc bytes behind prealloc extents Btrfs: fix off-by-one in lseek ...
-
Venu Byravarasu authored
Fix compilation error, by adding the correct header file for Tegra clocks. Signed-off-by:
Venu Byravarasu <vbyravarasu@nvidia.com> Reviewed-by:
-
Yi Zhang authored
1) add clk_enable/disable in serial_pxa_console_write() 2) add clk_prepare() to follow common clock driver Signed-off-by:
Yi Zhang <yizhang@marvell.com> Signed-off-by:
-
Liang Li authored
When PCH_UART_CONSOLE and SERIAL_CORE_CONSOLE is not set neither, the uart_port will have no 'sysrq' member hence their will need a '#ifdef' in pch_uart.c to handle the case, otherwise we'll see compile error like this: CC [M] drivers/tty/serial/pch_uart.o drivers/tty/serial/pch_uart.c: In function 'pch_uart_hal_read': drivers/tty/serial/pch_uart.c:572:11: error: 'struct uart_port' has no member named 'sysrq' make[4]: *** [drivers/tty/serial/pch_uart.o] Error 1 Reported-by:
Randy Dunlap <rdunlap@infradead.org> CC: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Liang Li <liang.li@windriver.com> Acked-by:
-
Karthik Manamcheri authored
When the tty input buffer is full and thereby throttled, flushing/resetting the read buffer should unthrottle to allow more data to be received. Signed-off-by:
Karthik Manamcheri <Karthik.Manamcheri@ni.com> Signed-off-by:
-
Alan Cox authored
Sorry forgot to merge this in the original submission. Resync with the tty tree changes moving the buffers into the tty_port Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Two small cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: fs/cifs/cifs_dfs_ref.c: fix potential memory leakage cifs: fix srcip_matches() for ipv6
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixlet from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Emulate dcbf
-
- 24 Jan, 2013 9 commits
-
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A number of fixes: Patrik found a problem with preempt counting in the VFP assembly functions which can cause the preempt count to be upset. Nicolas fixed a problem with the parsing of the DT when it straddles a 1MB boundary. Subhash Jadavani reported a problem with sparsemem and our highmem support for cache maintanence for DMA areas, and TI found a bug in their strongly ordered memory mapping type. Also, three fixes by way of Will Deacon's tree from Dave Martin for instruction compatibility and Marc Zyngier to fix hypervisor boot mode issues." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7629/1: mm: Fix missing XN flag for for MT_MEMORY_SO ARM: DMA: Fix struct page iterator in dma_cache_maint() to work with sparsemem ARM: 7628/1: head.S: map one extra section for the ATAG/DTB area ARM: 7627/1: Predicate preempt logic on PREEMP_COUNT not PREEMPT alone ARM: virt: simplify __hyp_stub_install epilog ARM: virt: boot secondary CPUs through the right entry point ARM: virt: Avoid bx instruction for compatibility with <=ARMv4
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Here's a long-pending fixes pull request for arm-soc (I didn't send one in the -rc4 cycle). The larger deltas are from: - A fixup of error paths in the mvsdio driver - Header file move for a driver that hadn't been properly converted to multiplatform on i.MX, which was causing build failures when included - Device tree updates for at91 dealing mostly with their new pinctrl setup merged in 3.8 and mistakes in those initial configs The rest are the normal mix of small fixes all over the place; sunxi, omap, imx, mvebu, etc, etc." * tag 'fixes-for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits) mfd: vexpress-sysreg: Don't skip initialization on probe ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree ARM: vexpress: extend the MPIDR range used for pen release check ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig ARM: at91/at91_dt_defconfig: remove memory specification to cmdline ARM: at91/dts: add macb mii pinctrl config for kizbox ARM: at91: rm9200: remake the BGA as default version ARM: at91: fix gpios on i2c-gpio for RM9200 DT ARM: at91/at91sam9x5 DTS: add SCK USART pins ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts ARM: at91/at91-pinctrl documentation: fix typo and add some details ARM: kirkwood: fix missing #interrupt-cells property mmc: mvsdio: use devm_ API to simplify/correct error paths. clk: mvebu/clk-cpu.c: fix memory leakage ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport ARM: OMAP2+: DT node Timer iteration fix ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() ARM: OMAP2+: fix build break for omapdrm ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: - Two cpuidle initialization fixes from Konrad Rzeszutek Wilk. - cpufreq regression fixes for AMD processors from Borislav Petkov, Stefan Bader, and Matthew Garrett. - ACPI cpufreq fix from Thomas Schlichter. - cpufreq and devfreq fixes related to incorrect usage of operating performance points (OPP) framework and RCU from Nishanth Menon. - APEI workaround for incorrect BIOS information from Lans Zhang. * tag 'pm+acpi-for-3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Add module aliases for acpi-cpufreq ACPI: Check MSR valid bit before using P-state frequencies PM / devfreq: exynos4_bus: honor RCU lock usage PM / devfreq: add locking documentation for recommended_opp cpufreq: cpufreq-cpu0: use RCU locks around usage of OPP cpufreq: OMAP: use RCU locks around usage of OPP ACPI, APEI: Fixup incorrect 64-bit access width firmware bug ACPI / processor: Get power info before updating the C-states powernow-k8: Add a kconfig dependency on acpi-cpufreq ACPI / cpuidle: Fix NULL pointer issues when cpuidle is disabled intel_idle: Don't register CPU notifier if we are not running.
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap fixes from Mark Brown: "One more oversight in the debugfs code was reported and fixed, plus a documentation fix." * tag 'regmap-fix-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: fix small typo in regmap_bulk_write comment regmap: debugfs: Fix seeking from the cache
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine fixes from Vinod Koul: "A few fixes on slave dmanengine. There are trivial fixes in imx-dma, tegra-dma & ioat driver" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: tegra: implement flags parameters for cyclic transfer dmaengine: imx-dma: Disable use of hw_chain to fix sg_dma transfers. ioat: Fix DMA memory sync direction correct flag
-
git://git.pengutronix.de/git/wsa/linuxLinus Torvalds authored
Pill i2c fixes from Wolfram Sang: "Here are a few, typical driver fixes for the I2C subsystem" * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c-designware: add missing MODULE_LICENSE i2c: omap: fix draining irq handling i2c: omap: errata i462: fix incorrect ack for arbitration lost interrupt i2c: muxes: fix wrong use of sizeof(ptr) i2c: sirf: register i2c_client from dt child-nodes in probe entry i2c: mxs: Fix type of error code i2c: mxs: Fix misuse init_completion
-
Miao Xie authored
btrfs_start_delalloc_inodes() locks the delalloc_inodes list, fetches the first inode, unlocks the list, triggers btrfs_alloc_delalloc_work/ btrfs_queue_worker for this inode, and then it locks the list, checks the head of the list again. But because we don't delete the first inode that it deals with before, it will fetch the same inode. As a result, this function allocates a huge amount of btrfs_delalloc_work structures, and OOM happens. Fix this problem by splice this delalloc list. Reported-by:
Alex Lyakas <alex.btrfs@zadarastorage.com> Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Josef Bacik <jbacik@fusionio.com>
-
Miao Xie authored
The max device number of single profile is 1, not 0 (0 means 'as many as possible'). Fix it. Cc: Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Miao Xie authored
First, though the current transaction->aborted check can stop the commit early and avoid unnecessary operations, it is too early, and some transaction handles don't end, those handles may set transaction->aborted after the check. Second, when we commit the transaction, we will wake up some worker threads to flush the space cache and inode cache. Those threads also allocate some transaction handles and may set transaction->aborted if some serious error happens. So we need more check for ->aborted when committing the transaction. Fix it. Signed-off-by:
-
