Skip to content

L
linux
Switch branch/tag
  1. 28 Apr, 2022 4 commits
    • Dylan Hung's avatar
      ARM: dts: aspeed: add reset properties into MDIO nodes · a8db203d
      Dylan Hung authored 
      Add reset control properties into MDIO nodes.  The 4 MDIO controllers in
AST2600 SOC share one reset control bit SCU50[3].
Signed-off-by: default avatarDylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: default avatarAndrew Jeffery <andrew@aj.id.au>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      a8db203d
    • Dylan Hung's avatar
      net: mdio: add reset control for Aspeed MDIO · 15853622
      Dylan Hung authored 
      Add reset assertion/deassertion for Aspeed MDIO.  There are 4 MDIO
controllers embedded in Aspeed AST2600 SOC and share one reset control
register SCU50[3].  To work with old DT blobs which don't have the reset
property, devm_reset_control_get_optional_shared is used in this change.
Signed-off-by: default avatarDylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarAndrew Jeffery <andrew@aj.id.au>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      15853622
    • Dylan Hung's avatar
      dt-bindings: net: add reset property for aspeed, ast2600-mdio binding · 65e42ad9
      Dylan Hung authored 
      The AST2600 MDIO bus controller has a reset control bit and must be
deasserted before manipulating the MDIO controller. By default, the
hardware asserts the reset so the driver only need to deassert it.

Regarding to the old DT blobs which don't have reset property in them,
the reset deassertion is usually done by the bootloader so the reset
property is optional to work with them.
Signed-off-by: default avatarDylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: default avatarAndrew Jeffery <andrew@aj.id.au>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      65e42ad9
    • Jakub Kicinski's avatar
      Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next · 50c6afab
      Jakub Kicinski authored 
      Daniel Borkmann says:

====================
pull-request: bpf-next 2022-04-27

We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).

The main changes are:

1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
   information about failed CO-RE relocations, from Andrii Nakryiko.

2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
   (via probe read) and referenced ones that can be passed to in-kernel helpers,
   from Kumar Kartikeya Dwivedi.

3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
   progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.

4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
   the effective prog array before the rcu_read_lock, from Stanislav Fomichev.

5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
   for USDT arguments under riscv{32,64}, from Pu Lehui.

6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.

7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
   so it can be shipped under Alpine which is musl-based, from Dominique Martinet.

8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
   need to use call_rcu_tasks_trace() barrier, from KP Singh.

9) Improve libbpf API documentation and fix error return handling of various
   API functions, from Grant Seltzer.

10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
    length of frags + frag_list may surpass old offset limit, from Liu Jian.

11) Various improvements to prog_tests in area of logging, test execution
    and by-name subtest selection, from Mykola Lysenko.

12) Simplify map_btf_id generation for all map types by moving this process
    to build time with help of resolve_btfids infra, from Menglong Dong.

13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
    helpers; the probing caused always to use old helpers, from Runqing Yang.

14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
    tracing macros, from Vladimir Isaev.

15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
    switched to memcg-based memory accouting a while ago, from Yafang Shao.

16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.

17) Fix BPF selftests in two occasions to work around regressions caused by latest
    LLVM to unblock CI until their fixes are worked out, from Yonghong Song.

18) Misc cleanups all over the place, from various others.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
  selftests/bpf: Add libbpf's log fixup logic selftests
  libbpf: Fix up verifier log for unguarded failed CO-RE relos
  libbpf: Simplify bpf_core_parse_spec() signature
  libbpf: Refactor CO-RE relo human description formatting routine
  libbpf: Record subprog-resolved CO-RE relocations unconditionally
  selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
  libbpf: Avoid joining .BTF.ext data with BPF programs by section name
  libbpf: Fix logic for finding matching program for CO-RE relocation
  libbpf: Drop unhelpful "program too large" guess
  libbpf: Fix anonymous type check in CO-RE logic
  bpf: Compute map_btf_id during build time
  selftests/bpf: Add test for strict BTF type check
  selftests/bpf: Add verifier tests for kptr
  selftests/bpf: Add C tests for kptr
  libbpf: Add kptr type tag macros to bpf_helpers.h
  bpf: Make BTF type match stricter for release arguments
  bpf: Teach verifier about kptr_get kfunc helpers
  bpf: Wire up freeing of referenced kptr
  bpf: Populate pairs of btf_id and destructor kfunc in btf
  bpf: Adapt copy_map_value for multiple offset case
  ...
====================

Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.netSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      50c6afab
  3. 27 Apr, 2022 28 commits
  5. 26 Apr, 2022 8 commits
    • Alexei Starovoitov's avatar
      Merge branch 'Teach libbpf to "fix up" BPF verifier log' · d54d06a4
      Alexei Starovoitov authored 
      Andrii Nakryiko says:

====================

This patch set teaches libbpf to enhance BPF verifier log with human-readable
and relevant information about failed CO-RE relocation. Patch #9 is the main
one with the new logic. See relevant commit messages for some more details.

All the other patches are either fixing various bugs detected
while working on this feature, most prominently a bug with libbpf not handling
CO-RE relocations for SEC("?...") programs, or are refactoring libbpf
internals to allow for easier reuse of CO-RE relo lookup and formatting logic.
====================
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      d54d06a4
    • Andrii Nakryiko's avatar
      selftests/bpf: Add libbpf's log fixup logic selftests · ea4128eb
      Andrii Nakryiko authored 
      Add tests validating that libbpf is indeed patching up BPF verifier log
with CO-RE relocation details. Also test partial and full truncation
scenarios.

This test might be a bit fragile due to changing BPF verifier log
format. If that proves to be frequently breaking, we can simplify tests
or remove the truncation subtests. But for now it seems useful to test
it in those conditions that are otherwise rarely occuring in practice.

Also test CO-RE relo failure in a subprog as that excercises subprogram CO-RE
relocation mapping logic which doesn't work out of the box without extra
relo storage previously done only for gen_loader case.
Signed-off-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-11-andrii@kernel.org
      ea4128eb
    • Andrii Nakryiko's avatar
      libbpf: Fix up verifier log for unguarded failed CO-RE relos · 9fdc4273
      Andrii Nakryiko authored 
      Teach libbpf to post-process BPF verifier log on BPF program load
failure and detect known error patterns to provide user with more
context.

Currently there is one such common situation: an "unguarded" failed BPF
CO-RE relocation. While failing CO-RE relocation is expected, it is
expected to be property guarded in BPF code such that BPF verifier
always eliminates BPF instructions corresponding to such failed CO-RE
relos as dead code. In cases when user failed to take such precautions,
BPF verifier provides the best log it can:

  123: (85) call unknown#195896080
  invalid func unknown#195896080

Such incomprehensible log error is due to libbpf "poisoning" BPF
instruction that corresponds to failed CO-RE relocation by replacing it
with invalid `call 0xbad2310` instruction (195896080 == 0xbad2310 reads
"bad relo" if you squint hard enough).

Luckily, libbpf has all the necessary information to look up CO-RE
relocation that failed and provide more human-readable description of
what's going on:

  5: <invalid CO-RE relocation>
  failed to resolve CO-RE relocation <byte_off> [6] struct task_struct___bad.fake_field_subprog (0:2 @ offset 8)

This hopefully makes it much easier to understand what's wrong with
user's BPF program without googling magic constants.

This BPF verifier log fixup is setup to be extensible and is going to be
used for at least one other upcoming feature of libbpf in follow up patches.
Libbpf is parsing lines of BPF verifier log starting from the very end.
Currently it processes up to 10 lines of code looking for familiar
patterns. This avoids wasting lots of CPU processing huge verifier logs
(especially for log_level=2 verbosity level). Actual verification error
should normally be found in last few lines, so this should work
reliably.

If libbpf needs to expand log beyond available log_buf_size, it
truncates the end of the verifier log. Given verifier log normally ends
with something like:

  processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0

... truncating this on program load error isn't too bad (end user can
always increase log size, if it needs to get complete log).
Signed-off-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-10-andrii@kernel.org
      9fdc4273
    • Andrii Nakryiko's avatar
      libbpf: Simplify bpf_core_parse_spec() signature · 14032f26
      Andrii Nakryiko authored 
      Simplify bpf_core_parse_spec() signature to take struct bpf_core_relo as
an input instead of requiring callers to decompose them into type_id,
relo, spec_str, etc. This makes using and reusing this helper easier.
Signed-off-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-9-andrii@kernel.org
      14032f26
    • Andrii Nakryiko's avatar
      libbpf: Refactor CO-RE relo human description formatting routine · b58af63a
      Andrii Nakryiko authored 
      Refactor how CO-RE relocation is formatted. Now it dumps human-readable
representation, currently used by libbpf in either debug or error
message output during CO-RE relocation resolution process, into provided
buffer. This approach allows for better reuse of this functionality
outside of CO-RE relocation resolution, which we'll use in next patch
for providing better error message for BPF verifier rejecting BPF
program due to unguarded failed CO-RE relocation.

It also gets rid of annoying "stitching" of libbpf_print() calls, which
was the only place where we did this.
Signed-off-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-8-andrii@kernel.org
      b58af63a
    • Andrii Nakryiko's avatar
      libbpf: Record subprog-resolved CO-RE relocations unconditionally · 185cfe83
      Andrii Nakryiko authored 
      Previously, libbpf recorded CO-RE relocations with insns_idx resolved
according to finalized subprog locations (which are appended at the end
of entry BPF program) to simplify the job of light skeleton generator.

This is necessary because once subprogs' instructions are appended to
main entry BPF program all the subprog instruction indices are shifted
and that shift is different for each entry (main) BPF program, so it's
generally impossible to map final absolute insn_idx of the finalized BPF
program to their original locations inside subprograms.

This information is now going to be used not only during light skeleton
generation, but also to map absolute instruction index to subprog's
instruction and its corresponding CO-RE relocation. So start recording
these relocations always, not just when obj->gen_loader is set.

This information is going to be freed at the end of bpf_object__load()
step, as before (but this can change in the future if there will be
a need for this information post load step).
Signed-off-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-7-andrii@kernel.org
      185cfe83
    • Andrii Nakryiko's avatar
      selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests · b82bb1ff
      Andrii Nakryiko authored 
      Enhance linked_funcs selftest with two tricky features that might not
obviously work correctly together. We add CO-RE relocations to entry BPF
programs and mark those programs as non-autoloadable with SEC("?...")
annotation. This makes sure that libbpf itself handles .BTF.ext CO-RE
relocation data matching correctly for SEC("?...") programs, as well as
ensures that BPF static linker handles this correctly (this was the case
before, no changes are necessary, but it wasn't explicitly tested).
Signed-off-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-6-andrii@kernel.org
      b82bb1ff
    • Andrii Nakryiko's avatar
      libbpf: Avoid joining .BTF.ext data with BPF programs by section name · 11d5daa8
      Andrii Nakryiko authored 
      Instead of using ELF section names as a joining key between .BTF.ext and
corresponding BPF programs, pre-build .BTF.ext section number to ELF
section index mapping during bpf_object__open() and use it later for
matching .BTF.ext information (func/line info or CO-RE relocations) to
their respective BPF programs and subprograms.

This simplifies corresponding joining logic and let's libbpf do
manipulations with BPF program's ELF sections like dropping leading '?'
character for non-autoloaded programs. Original joining logic in
bpf_object__relocate_core() (see relevant comment that's now removed)
was never elegant, so it's a good improvement regardless. But it also
avoids unnecessary internal assumptions about preserving original ELF
section name as BPF program's section name (which was broken when
SEC("?abc") support was added).

Fixes: a3820c48 ("libbpf: Support opting out from autoloading BPF programs declaratively")
Signed-off-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-5-andrii@kernel.org
      11d5daa8
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7