- 02 Jun, 2021 40 commits
-
-
Dmytro Linkin authored
Implement support for DEVLINK_CMD_RATE_{NEW|DEL} commands that are used to create and delete devlink rate nodes. Add new attribute DEVLINK_ATTR_RATE_NODE_NAME that specify node name string. The node name is an alphanumeric identifier. No valid node name can be a devlink port index, eg. decimal number. Extend devlink ops with new callbacks rate_node_{new|del}() and rate_node_tx_{share|max}_set() to allow supporting drivers to implement ports rate grouping and setting tx rate of rate nodes through devlink. Expose devlink_rate_nodes_destroy() function to allow vendor driver do proper cleanup of internally allocated resources for the nodes if the driver goes down or due to any other reasons which requires nodes to be destroyed. Disallow moving device from switchdev to legacy mode if any node exists on that device. User must explicitly delete nodes before switching mode. Example: $ devlink port function rate add netdevsim/netdevsim10/group1 $ devlink port function rate set netdevsim/netdevsim10/group1 \ tx_share 10mbit tx_max 100mbit Add + set command can be combined: $ devlink port function rate add netdevsim/netdevsim10/group1 \ tx_share 10mbit tx_max 100mbit $ devlink port function rate show netdevsim/netdevsim10/group1 netdevsim/netdevsim10/group1: type node tx_share 10mbit tx_max 100mbit $ devlink port function rate del netdevsim/netdevsim10/group1 Co-developed-by:Vlad Buslov <vladbu@nvidia.com> Signed-off-by:
Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmytro Linkin authored
Test verifies that netdevsim VFs can set and retrieve shared/max tx rate through new devlink API. Co-developed-by:
-
Dmytro Linkin authored
Implement new devlink ops that allow shared and max tx rate control for devlink port rate objects (leafs) through devlink API. Expose rate values of VF ports to netdevsim debugfs. Co-developed-by:
-
Dmytro Linkin authored
Implement support for DEVLINK_CMD_RATE_SET command with new attributes DEVLINK_ATTR_RATE_TX_{SHARE|MAX} that are used to set devlink rate shared/max tx rate values. Extend devlink ops with new callbacks rate_leaf_tx_{share|max}_set() to allow supporting drivers to implement rate control through devlink. New attributes are optional. Driver implementations are allowed to support either or both of them. Shared rate example: $ devlink port function rate set netdevsim/netdevsim10/0 tx_share 10mbit $ devlink port function rate show netdevsim/netdevsim10/0 netdevsim/netdevsim10/0: type leaf tx_share 10mbit Max rate example: $ devlink port function rate set netdevsim/netdevsim10/0 tx_max 100mbit $ devlink port function rate show netdevsim/netdevsim10/0 netdevsim/netdevsim10/0: type leaf tx_max 100mbit Co-developed-by: -
Dmytro Linkin authored
Test verifies that all netdevsim VF ports have rate leaf object created by default. Co-developed-by:
-
Dmytro Linkin authored
Register devlink rate leaf objects per VF. Co-developed-by:
-
Dmytro Linkin authored
Allow registering rate object for devlink ports with dedicated devlink_rate_leaf_{create|destroy}() API. Implement new netlink DEVLINK_CMD_RATE_GET command that is used to retrieve rate object info. Add new DEVLINK_CMD_RATE_{NEW|DEL} commands that are used for notifications when creating/deleting leaf rate object. Rate API is intended to be used for rate limiting of individual devlink ports (leafs) and their aggregates (nodes). Example: $ devlink port show pci/0000:03:00.0/0 pci/0000:03:00.0/1 $ devlink port function rate show pci/0000:03:00.0/0: type leaf pci/0000:03:00.0/1: type leaf Co-developed-by: -
Dmytro Linkin authored
Implement callbacks to set/get eswitch mode value. Add helpers to check current mode. Instantiate VFs' net devices and devlink ports on switchdev enabling and remove them on legacy enabling. Changing number of VFs while in switchdev mode triggers VFs creation/deletion. Also disable NDO API callback to set VF rate, since it's legacy API. Switchdev API to set VF rate will be implemented in one of the next patches. Signed-off-by:
-
Dmytro Linkin authored
Allow creation of netdevsim ports for VFs along with allocations of corresponding net devices and devlink ports. Add enums and helpers to distinguish PFs' ports from VFs' ports. Ports creation/deletion debugfs API intended to be used with physical ports only. VFs instantiation will be done in one of the next patches. Signed-off-by:
-
Dmytro Linkin authored
Define type of ports, which netdevsim driver currently operates with as PF. Define new port type - VF, which will be implemented in following patches. Add helper functions to distinguish them. Add helper function to get VF index from port index. Add port indexing logic where PFs' indexes starts from 0, VFs' - from NSIM_DEV_VF_PORT_INDEX_BASE. All ports uses same index pool, which means that PF port may be created with index from VFs' indexes range. Maximum number of VFs, which the driver can allocate, is limited by UINT_MAX - BASE. Signed-off-by:
-
Dmytro Linkin authored
Move VFs disabling from device release() to nsim_dev_reload_destroy() to make VFs disabling and ports removal simultaneous. This is a requirement for VFs ports implemented in next patches. Signed-off-by:
-
Dmytro Linkin authored
Currently there is no limit to the number of VFs netdevsim can enable. In a real systems this value exist and used by the driver. Fore example, some features might need to consider this value when allocating memory. Expose max_vfs variable to debugfs as configurable resource. If are VFs configured (num_vfs != 0) then changing of max_vfs not allowed. Co-developed-by:
Yuval Avnery <yuvalav@nvidia.com> Signed-off-by:
-
David S. Miller authored
Simon Horman says: ==================== Introduce conntrack offloading to the nfp driver Louis Peens says: This is the first in a series of patches to offload conntrack to the nfp. The approach followed is to flatten out three different flow rules into a single offloaded flow. The three different flows are: 1) The rule sending the packet to conntrack (pre_ct) 2) The rule matching on +trk+est after a packet has been through conntrack. (post_ct) 3) The rule received via callback from the netfilter (nft) In order to offload a flow we need a combination of all three flows, but they could be added/deleted at different times and in different order. To solve this we save potential offloadable CT flows in the driver, and every time we receive a callback we check against these saved flows for valid merges. Once we have a valid combination of all three flows this will be offloaded to the NFP. This is demonstrated in the diagram below. +-------------+ +----------+ | pre_ct flow +--------+ | nft flow | +-------------+ v +------+---+ +----------+ | | tc_merge +--------+ | +----------+ v v +--------------+ ^ +-------------+ | post_ct flow +-------+ +---+nft_tc merge | +--------------+ | +-------------+ | | | v Offload to nfp This series is only up to the point of the pre_ct and post_ct merges into the tc_merge. Follow up series will continue to add the nft flows and merging of these flows with the result of the pre_ct and post_ct merged flows. Changes since v2: - nfp: flower-ct: add zone table entry when handling pre/post_ct flows Fixed another docstring. Should finally have the patch check environment properly configured now to avoid more of these. - nfp: flower-ct: add tc merge functionality Fixed warning found by "kernel test robot <lkp@intel.com>" Added code comment explaining chain_index comparison Changes since v1: - nfp: flower-ct: add ct zone table Fixed unused variable compile warning Fixed missing colon in struct description ==================== Acked-by:Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Louis Peens authored
Add merging of pre/post_ct flow rules into the tc_merge table. Pre_ct flows needs to be merge with post_ct flows and vice versa. This needs to be done for all flows in the same zone table, as well as with the wc_zone_table, which is for flows masking out ct_zone info. Cleanup is happening when all the tables are cleared up and prints a warning traceback as this is not expected in the final version. At this point we are not actually returning success for the offload, so we do not get any delete requests for flows, so we can't delete them that way yet. This means that cleanup happens in what would usually be an exception path. Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Louis Peens authored
Add the table required to store the merge result of pre_ct and post_ct flows. This is just the initial setup and teardown of the table, the implementation will be in follow-up patches. Signed-off-by:
-
Louis Peens authored
Add a hashtable which contains entries to map flow cookies to ct flow entries. Currently the entries are added and not used, but follow-up patches will use this for stats updates and flow deletes. Signed-off-by:
-
Louis Peens authored
This commit starts adding the structures and lists that will be used in follow up commits to enable offloading of conntrack. Some stub functions are also introduced as placeholders by this commit. Signed-off-by:
-
Louis Peens authored
Start populating the pre/post_ct handler functions. Add a zone entry to the zone table, based on the zone information from the flow. In the case of a post_ct flow which has a wildcarded match on the zone create a special entry. Signed-off-by:
-
Louis Peens authored
Add initial zone table to nfp_flower_priv. This table will be used to store all the information required to offload conntrack. Signed-off-by:
-
Louis Peens authored
Add checks to see if a flow is a conntrack flow we can potentially handle. Just stub out the handling the different conntrack flows. Signed-off-by:
-
Louis Peens authored
This is in preparation for conntrack offload support which makes used of different chains. Add explicit checks for conntrack and non-zero chains in the add_offload path. Signed-off-by:
-
Zheng Yongjun authored
Fix some spelling mistakes in comments: thats ==> that's serivce ==> service varience ==> variance Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
Zheng Yongjun authored
targetted ==> targeted Signed-off-by:
-
Zheng Yongjun authored
Fix some spelling mistakes in comments: udpate ==> update retreive ==> retrieve accidentially ==> accidentally correspondig ==> corresponding adddress ==> address estabilish ==> establish commplete ==> complete Unkown ==> Unknown triggerd ==> triggered transtion ==> transition Signed-off-by:
-
Zheng Yongjun authored
reseting ==> resetting alloced ==> allocated accomodate ==> accommodate Signed-off-by:
-
Zheng Yongjun authored
atribute ==> attribute Signed-off-by:
-
zhang kai authored
Use meaningfull micro IPV4_MIN_MTU Signed-off-by:
zhang kai <zhangkaiheb@126.com> Signed-off-by:
-
Rafał Miłecki authored
This helps validating DTS files. Introduced changes: 1. Swapped #address-cells and #size-cells values 2. Renamed node: s/enet-gphy/ethernet-phy@/ Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Support for SCTP chunks matching on nf_tables, from Phil Sutter. 2) Skip LDMXCSR, we don't need a valid MXCSR state. From Stefano Brivio. 3) CONFIG_RETPOLINE for nf_tables set lookups, from Florian Westphal. 4) A few Kconfig leading spaces removal, from Juerg Haefliger. 5) Remove spinlock from xt_limit, from Jason Baron. 6) Remove useless initialization in xt_CT, oneliner from Yang Li. 7) Tree-wide replacement of netlink_unicast() by nfnetlink_unicast(). 8) Reduce footprint of several structures: xt_action_param, nft_pktinfo and nf_hook_state, from Florian. 10) Add nft_thoff() and nft_sk() helpers and use them, also from Florian. 11) Fix documentation in nf_tables pipapo avx2, from Florian Westphal. 12) Fix clang-12 fmt string warnings, also from Florian. ====================
-
David S. Miller authored
Sharath Chandra Vurukala says: ==================== net: qualcomm: rmnet: Enable Mapv5 This series introduces the MAPv5 packet format. Patch 0 documents the MAPv4/v5. Patch 1 introduces the MAPv5 and the Inline checksum offload for RX/Ingress. Patch 2 introduces the MAPv5 and the Inline checksum offload for TX/Egress. A new checksum header format is used as part of MAPv5.For RX checksum offload, the checksum is verified by the HW and the validity is marked in the checksum header of MAPv5. For TX, the required metadata is filled up so hardware can compute the checksum. v1->v2: - Fixed the compilation errors, warnings reported by kernel test robot. - Checksum header definition is expanded to support big, little endian formats as mentioned by Jakub. v2->v3: - Fixed compilation errors reported by kernel bot for big endian flavor. v3->v4: - Made changes to use masks instead of C bit-fields as suggested by Jakub/Alex. v4->v5: - Corrected checkpatch errors and warnings reported by patchwork. v5->v6: - Corrected the bug identified by Alex and incorporated all his comments. v6->v7: - Removed duplicate inclusion of linux/bitfield.h in rmnet_map_data.c v7->v8: - Have addressed comments given by JAkub on v7 patches. - As suggested by Jakub, skb_cow_head() is used instead of expanding the head directly. This is now done in rmnet_map_egress_handler(). ==================== Signed-off-by: -
Sharath Chandra Vurukala authored
Adding support for MAPv5 egress packets. This involves adding the MAPv5 header and setting the csum_valid_required in the checksum header to request HW compute the checksum. Corresponding stats are incremented based on whether the checksum is computed in software or HW. New stat has been added which represents the count of packets whose checksum is calculated by the HW. Signed-off-by:
Sharath Chandra Vurukala <sharathv@codeaurora.org> Signed-off-by:
-
Sharath Chandra Vurukala authored
Adding support for processing of MAPv5 downlink packets. It involves parsing the Mapv5 packet and checking the csum header to know whether the hardware has validated the checksum and is valid or not. Based on the checksum valid bit the corresponding stats are incremented and skb->ip_summed is marked either CHECKSUM_UNNECESSARY or left as CHEKSUM_NONE to let network stack revalidate the checksum and update the respective snmp stats. Current MAPV1 header has been modified, the reserved field in the Mapv1 header is now used for next header indication. Signed-off-by:
-
Sharath Chandra Vurukala authored
Adding documentation explaining the new MAPv4/v5 packet formats and the corresponding checksum offload headers. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linuxDavid S. Miller authored
Tony Nguyen says: ==================== iwl-next Intel Wired LAN Driver Updates 2021-06-01 This pull request is targeting net-next and rdma-next branches. These patches have been reviewed by netdev and rdma mailing lists[1]. This series adds RDMA support to the ice driver for E810 devices and converts the i40e driver to use the auxiliary bus infrastructure for X722 devices. The PCI netdev drivers register auxiliary RDMA devices that will bind to auxiliary drivers registered by the new irdma module. [1] https://lore.kernel.org/netdev/20210520143809.819-1-shiraz.saleem@intel.com/ --- v3: - ice_aq_add_rdma_qsets(), ice_cfg_vsi_rdma(), ice_[ena|dis]_vsi_rdma_qset(), and ice_cfg_rdma_fltr() no longer return ice_status - Remove null check from ice_aq_add_rdma_qsets() v2: - Added patch 'i40e: Replace one-element array with flexible-array member' Changes since linked review (v6): - Removed unnecessary checks in i40e_client_device_register() and i40e_client_device_unregister() - Simplified the i40e_client_device_register() API ==================== Signed-off-by:
-
Zheng Yongjun authored
informations ==> information typicaly ==> typically derrive ==> derive eventhough ==> even though Signed-off-by:
-
Zheng Yongjun authored
wierdness ==> weirdness multicat ==> multicast limite ==> limit adddress ==> address operater ==> operator intial ==> initial smaler ==> smaller Communcation ==> Communication funcitons ==> functions everytime ==> every time Neigbor ==> Neighbor performace ==> performance Signed-off-by:
-
Zheng Yongjun authored
possibile ==> possible Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Zheng Yongjun authored
Suppport ==> Support Signed-off-by:
-
Zheng Yongjun authored
underlaying ==> underlying Signed-off-by:
-
Zheng Yongjun authored
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
-
