- 08 May, 2018 35 commits
-
-
Chad Dupuis authored
Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Chad Dupuis authored
When an RRQ request times out the reference is not getting decremented correctly as there are still ELS commands leftover when we flush any pending I/Os during offload: [ 281.788553] [0000:21:00.3]:[qedf_cmd_timeout:58]:4: ELS timeout, xid=0x96a. ... [ 281.788553] [0000:21:00.3]:[qedf_cmd_timeout:58]:4: ELS timeout, xid=0x96a. [ 281.788772] [0000:21:00.3]:[qedf_rrq_compl:182]:4: Entered. [ 281.788774] [0000:21:00.3]:[qedf_rrq_compl:200]:4: rrq_compl: orig io = ffffc90004c556f8, orig xid = 0x81b, rrq_xid = 0x96a, refcount=1 ... [ 331.448032] [0000:21:00.3]:[qedf_flush_els_req:1512]:4: Flushing ELS request xid=0x96a refcount=2. The fix is to call kref_put on the rrq_req in case of timeout as the timeout handler will call rrq_compl directly vs. a normal completion where it is call from els_compl. Signed-off-by:
-
Chad Dupuis authored
We currently hard code the priority in the 8021q tag to 3 for FCoE traffic. The vast majority of the time this is fine but if the priority is something else besides 3, any VLAN ID comparison either in the non-offload path or offload path will fail and cause dropped frames where none are expected. Change the behavior so that the driver default is 3 if we do not get any DCBX convergence. If DCBX does converge, then set the FIP/FCoE priority in the following manner: 1. If the qedf_default_prio modparam is set use that 2. If the DCBX FCoE priority is not in range (0..7) use 3 3. Use the DCBX FCoE priority we get in the driver's DCBX handler Signed-off-by:
-
Chad Dupuis authored
scsi: qedf: Add dcbx_not_wait module parameter so we won't wait for DCBX convergence to start discovery This module parameter is to work around cases where we do not receive the DCBX handler notification from qed but discovery is still possible if we send out a FIP VLAN request irregardless of the DCBX state. [mkp: zeroday warning] Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Chad Dupuis authored
We need to check that a fcport is offloaded before we try to flush any requests. No doing so could lead to undefined results and most likely a crash. Fixes the oops: [ 343.971886] [0000:42:00.3]:[qedf_execute_tmf:2070]:8: wait for tm_cmpl timeout! [ 343.971933] BUG: unable to handle kernel paging request at 00000000000024a8 [ 343.971949] IP: [<ffffffffa06b8cc6>] qedf_flush_active_ios+0x46/0x260 [qedf] [ 343.971952] PGD 42c569067 PUD 4160fe067 PMD 0 [ 343.971954] Oops: 0000 [#1] SMP [ 343.972008] Modules linked in: qedf(OEX) qed(OEX) bnx2i cnic fuse af_packet iscsi_ibft msr xfs intel_rapl sb_edac edac_core x86_pkg_temp_thermal bnx2x geneve intel_powerclamp vxlan coretemp ipmi_ssif ipmi_devintf kvm_intel kvm libiscsi joydev irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel tg3 ip6_udp_tunnel udp_tunnel mdio libcrc32c iTCO_wdt scsi_transport_iscsi uio drbg iTCO_vendor_support iscsi_boot_sysfs dcdbas(X) ipmi_si ansi_cprng aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper ptp pps_core pcspkr libphy lpc_ich mfd_core cryptd fjes wmi ipmi_msghandler button crc8 libfcoe libfc scsi_transport_fc mei_me mei shpchp processor acpi_pad btrfs xor hid_generic usbhid raid6_pq sd_mod sr_mod cdrom mgag200 crc32c_intel i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt [ 343.972020] fb_sys_fops ttm ahci ehci_pci libahci ehci_hcd drm libata usbcore megaraid_sas usb_common sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 [last unloaded: qedf] [ 343.972022] Supported: Yes, External [ 343.972026] CPU: 30 PID: 12777 Comm: sg_reset Tainted: G W OE X 4.4.73-5-default #1 [ 343.972027] Hardware name: Dell Inc. PowerEdge R720/0X3D66, BIOS 2.1.3 11/20/2013 [ 343.972029] task: ffff88018dfc0e80 ti: ffff88042bd7c000 task.ti: ffff88042bd7c000 [ 343.972036] RIP: 0010:[<ffffffffa06b8cc6>] [<ffffffffa06b8cc6>] qedf_flush_active_ios+0x46/0x260 [qedf] [ 343.972038] RSP: 0018:ffff88042bd7fbe0 EFLAGS: 00010286 [ 343.972039] RAX: 0000000000000000 RBX: ffff88042ce37800 RCX: 0000000000000400 [ 343.972040] RDX: 000000000000060e RSI: ffffffffa06be830 RDI: ffff8807e5072cc0 [ 343.972041] RBP: 0000000000001000 R08: ffffffffa06bff4d R09: ffff88018dd84580 [ 343.972042] R10: 000000000000018b R11: 0000000000000002 R12: 0000000000002003 [ 343.972043] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8807e5072cc0 [ 343.972046] FS: 00007fc1c8809700(0000) GS:ffff88042fbc0000(0000) knlGS:0000000000000000 [ 343.972048] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 343.972049] CR2: 00000000000024a8 CR3: 00000004236ec000 CR4: 00000000001406e0 [ 343.972050] Stack: [ 343.972053] 504c78750607e154 ffffffff810a7d10 ffff88042ce37800 0000000000000010 [ 343.972055] 0000000000002003 ffff8807ff480c48 ffff8807e5072cc0 ffffc90004ec4ff8 [ 343.972057] ffffffffa06b9b86 ffff880800000010 0000000000000282 ffff88042ce37800 [ 343.972058] Call Trace: [ 343.972094] [<ffffffffa06b9b86>] qedf_initiate_tmf+0x346/0x3e0 [qedf] [ 343.972120] [<ffffffffa000fa06>] scsi_try_bus_device_reset+0x26/0x40 [scsi_mod] [ 343.972133] [<ffffffffa001038e>] scsi_ioctl_reset+0x13e/0x260 [scsi_mod] [ 343.972145] [<ffffffffa000f416>] scsi_ioctl+0x136/0x3d0 [scsi_mod] [ 343.972154] [<ffffffff812ff6eb>] blkdev_ioctl+0x6bb/0x950 [ 343.972164] [<ffffffff8123cfed>] block_ioctl+0x3d/0x40 [ 343.972170] [<ffffffff81217e2d>] do_vfs_ioctl+0x2cd/0x4a0 [ 343.972186] [<ffffffff81218074>] SyS_ioctl+0x74/0x80 [ 343.972193] [<ffffffff8160916e>] entry_SYSCALL_64_fastpath+0x12/0x6d [ 343.975285] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x12/0x6d Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Chad Dupuis authored
Some configurations need more than 30 seconds to respond to a FIP VLAN request so increase the default to 60 seconds. Signed-off-by:
-
Chad Dupuis authored
If multiple ELS commands time out, such as aborts, they could all try to restart the same rport and the same time. This could mean multiple multiple processes trying to clean up any outstanding commands or trying to upload the same port. Add a new flag (QEDF_RPORT_IN_RESET) and check other fcport state flags before trying to reset the port. Fixes the crash: [17501.824701] ------------[ cut here ]------------ [17501.824733] kernel BUG at include/asm-generic/dma-mapping-common.h:65! [17501.824760] invalid opcode: 0000 [#1] SMP [17501.824781] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ses enclosure dm_service_time vfat fat sb_edac edac_core intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass joydev btrfs hpilo raid6_pq iTCO_wdt iTCO_vendor_support xor hpwdt ipmi_ssif sg crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul ioatdma lpc_ich glue_helper ablk_helper i2c_i801 shpchp cryptd ipmi_si pcspkr acpi_power_meter ipmi_devintf pcc_cpufreq dca wmi ipmi_msghandler dm_multipath nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sr_mod cdrom sd_mod [17501.825119] crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm qedf(OE) drm libfcoe ahci qedi(OE) crct10dif_pclmul libfc libahci uio crct10dif_common crc32c_intel libiscsi libata scsi_transport_iscsi scsi_transport_fc tg3 qede(OE) scsi_tgt hpsa qed(OE) i2c_core ptp scsi_transport_sas pps_core iscsi_boot_sysfs dm_mirror dm_region_hash dm_log dm_mod [17501.825292] CPU: 8 PID: 10531 Comm: kworker/u96:1 Tainted: G OE ------------ 3.10.0-693.el7.x86_64 #1 [17501.825330] Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 06/02/2016 [17501.825372] Workqueue: fc_rport_eq fc_rport_work [libfc] [17501.825395] task: ffff88101bca8000 ti: ffff881025278000 task.ti: ffff881025278000 [17501.825424] RIP: 0010:[<ffffffffc042def9>] [<ffffffffc042def9>] qedf_unmap_sg_list.isra.15+0x89/0x90 [qedf] [17501.825471] RSP: 0018:ffff88102527bb98 EFLAGS: 00010212 [17501.825493] RAX: ffff8800224eac00 RBX: ffffc9000cd05210 RCX: 0000000000001000 [17501.825520] RDX: 000000007e655e40 RSI: 0000000000001000 RDI: ffff88107fe3b098 [17501.826683] RBP: ffff88102527bba0 R08: ffffffff81a13200 R09: 0000000000000286 [17501.827747] R10: 0000000000000004 R11: 0000000000000005 R12: ffffc9000cd051b8 [17501.828804] R13: ffff881037640c28 R14: 0000000000000007 R15: ffffc9000cd05200 [17501.829850] FS: 0000000000000000(0000) GS:ffff88103fa00000(0000) knlGS:0000000000000000 [17501.830910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [17501.831966] CR2: 00007f9b94005f38 CR3: 00000000019f2000 CR4: 00000000003407e0 [17501.833027] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [17501.834087] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [17501.835142] Stack: [17501.836201] ffff881033ddbb80 ffff88102527bc30 ffffffffc042f834 0000000000002710 [17501.837264] ffff88102527bbd0 ffffffff8133d9dd ffffc9000cd052a0 ffff88102527bc30 [17501.838325] ffffffff816a9c65 0000000000000001 ffff88101bca8000 ffffffff810c4810 [17501.839388] Call Trace: [17501.840446] [<ffffffffc042f834>] qedf_scsi_done+0x54/0x1d0 [qedf] [17501.841504] [<ffffffff8133d9dd>] ? list_del+0xd/0x30 [17501.842537] [<ffffffff816a9c65>] ? wait_for_completion_timeout+0x125/0x140 [17501.843560] [<ffffffff810c4810>] ? wake_up_state+0x20/0x20 [17501.844577] [<ffffffffc0430311>] qedf_initiate_cleanup+0x2e1/0x310 [qedf] [17501.845587] [<ffffffffc04305fe>] qedf_flush_active_ios+0x10e/0x260 [qedf] [17501.846612] [<ffffffffc042892f>] qedf_cleanup_fcport+0x5f/0x370 [qedf] [17501.847613] [<ffffffffc04292d8>] qedf_rport_event_handler+0x398/0x950 [qedf] [17501.848602] [<ffffffff810cdc7c>] ? dequeue_entity+0x11c/0x5d0 [17501.849581] [<ffffffff81098a2b>] ? __internal_add_timer+0xab/0x130 [17501.850555] [<ffffffff810ce54e>] ? dequeue_task_fair+0x41e/0x660 [17501.851528] [<ffffffffc03241a4>] fc_rport_work+0xf4/0x6c0 [libfc] [17501.852490] [<ffffffff810a881a>] process_one_work+0x17a/0x440 [17501.853446] [<ffffffff810a94e6>] worker_thread+0x126/0x3c0 Signed-off-by:
-
himanshu.madhani@cavium.com authored
Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Quinn Tran authored
For target mode, task management command is queued to specific cpu base on where the SCSI command is residing. This prevent race condition of task management command getting ahead of regular scsi command. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
himanshu.madhani@cavium.com authored
Signed-off-by:
-
Quinn Tran authored
Signed-off-by:
-
Quinn Tran authored
- Uses predefine inline function to access add_cdb_len field in ATIO. - Return SS_RESIDUAL_UNDER status when sending BUSY Signed-off-by:
-
Quinn Tran authored
When a connection is established, the target core session may not be created immediately. Current code will drop/terminate the command based on the session state. This patch will return BUSY status for any commands arriving on wire before the session is created. Signed-off-by:
-
Quinn Tran authored
Move GPSC & GFPNID commands out of session management to reduce time lag in reporting the session state to remote port. These commands are not essential when it comes to maintaining the rport state. Delay sending these commands after rport state is set to Online. Signed-off-by:
-
Quinn Tran authored
For each RSCN that triggers a rescan of the fabric, ADISC is used to revalidate an existing session. If the RSCN is not affecting all existing sessions, then driver should not send redundant ADISC for all existing sessions. Signed-off-by:
-
Quinn Tran authored
This patch fixes regression introduced by commit a4239945 ("scsi: qla2xxx: Add switch command to simplify fabric discovery") by scheduling session deletion when Nport ID changes. [mkp: clarified commit] Fixes: a4239945 ("scsi: qla2xxx: Add switch command to simplify fabric discovery") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Quinn Tran authored
This patch fixes rport state and session state getting out of sync. Signed-off-by:
-
Quinn Tran authored
This patch fixes login_retry login for ADISC command. when login_retry count reaches 0, further attempt to send ADISC command is ignored by the code. Remove this redundant login_retry count check from qla24xx_fcport_handle_login() [mkp: fix typo] Signed-off-by:
-
Chaitra P B authored
Update driver version to match OOB/internal driver version. Signed-off-by:
Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by:
Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by:
-
Chaitra P B authored
In ioctl exit path driver refers ioc_list to free memory associated with diag buffers and event_log pointer used to save events by driver. If ctl_exit() func is called after unregistering driver, then ioc_list will be empty and hence driver will not be able to free the allocated memory which in turn causes memory leak. So call ctl_exit() function before unregistering mpt3sas driver. Signed-off-by:
-
Chaitra P B authored
1) Manufacturing Page 11 contains parameters to control internal firmware behavior. Based on AddlFlags2 field FW/Driver behaviour can be changed, (flag tm_custom_handling is used for this) a) For PCIe device, protocol level reset should be used if flag tm_custom_handling is 0. Since Abort Task Set, LUN reset and Target reset will result in a protocol level reset. Drivers should issue only one type of this reset, if that fails then it should escalate to a controller reset (diag reset/OCR). b) If the driver has control over the TM reset timeout value, then driver should use the value exposed in PCIe Device Page 2 for pcie device (field ControllerResetTO). Signed-off-by:
-
Chaitra P B authored
Update MPI Files to support protocol level reset for NVMe device. Signed-off-by:
-
Chaitra P B authored
Added function _base_display_fwpkg_version, which sends FWUpload request to pull FW package version from FW Image Header. Now driver prints FW package version in addition to FW version if the PackageVersion is valid. Signed-off-by:
-
Chaitra P B authored
In function _scsih_add_device, for each device connected to an enclosure, driver reads the enclosure page(To get details like enclosure handle, enclosure logical ID, enclosure level etc.) With this patch, instead of reading enclosure page everytime, driver maintains a list for enclosure device(During enclosure add event, enclosure device is added to the list and removed from the list on delete events) and uses the enclosure page from the list. Signed-off-by:
-
Chaitra P B authored
Events were not processed during driver unload, hence unloading of driver doesn't complete when drives are disconnected while unloading of driver. So don't block events in ISR path, i,e., remove the flag ioc->remove_host so that events are getting processed during driver unload. Thus allowing driver unload to complete by processing drive removal events during driver unload. Signed-off-by:
-
Chaitra P B authored
For 24 port HBA's events generated by IOC are more in certain cases and the current circular buffer may be overwritten.Hence increased the event log buffer to accommodate more events. Signed-off-by:
-
Chaitra P B authored
The SAS Device Discovery Error Event is sent to the host when discovery for a particular device is failed during discovery, even after maximum retries by the IOC. Signed-off-by:
-
Chaitra P B authored
Enhanced DMA allocation for Sense Buffer, if the allocation does not fit within same 4GB.Introduced is_MSB_are_same function to check if allocted buffer within 4GB range or not. Signed-off-by:
-
Chaitra P B authored
For every IO, memory of PAGE size is allocated for handling NVMe native PRPS. And in addition to that for every IO (chains need per IO * chain buffer size, e.g. 38 * 128byte) amount of memory is allocated for chain buffers. However, at any point of time; the IO request can be for NVMe target device (where PRP's page is used for framing PRP's) or can be for SCSI target device (where chain buffers are used for framing chain SGE's). This patch modifies the driver to reuse same pre-allocated PRP page buffers as a chain buffer for IO's targeted for SCSI target devices. No need to allocate separate buffers for chain SGE's buffers. Suppose if the number of chain buffers need for IO doesn't fit in the PRP Page size then driver maintain's separate buffers for those extra chain buffers that exceeds the PRP page size. For example consider PRP page size as 4K and chain buffer size as 128 bytes, then number of chain buffers that can fit in PRP page is 4096/128 => 32. if the number of chain buffer need per IO exceeds 32; for example consider number of chains need per IO is 36 then for remaining 4 chain buffer's driver allocates them individual. Signed-off-by:
-
Chaitra P B authored
Introduces Chain lookup table/tracker and implements accessing chain buffer using smid. Removed link list based access of chain buffer which requires lock and allocated as many chains needed. Signed-off-by:
-
Chaitra P B authored
Instead of allocating RDPQ array (This stores the address's of each RDPQ pools) at run time, now it will be allocated once during driver load time and same will be reused during host reset operation also (instead of allocating & freeing this buffer on the fly during every host reset operation) and then freed during driver unload. Signed-off-by:
-
Chaitra P B authored
This patch fixes sparse warnings and bugs on big endian systems. Signed-off-by:
-
- 02 May, 2018 5 commits
-
-
Colin Ian King authored
Trivial fix to spelling mistake in module parameter description text [mkp: applied by hand] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in module parameter description text [mkp: applied by hand] Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in module description text Signed-off-by:
-
Colin Ian King authored
The sanity check on u->in_connection_align_insertion_frequency is being performed twice and hence the first check can be removed since it is redundant. Cleans up cppcheck warning: drivers/scsi/ibmvscsi/ibmvscsi.c:1711: (warning) Identical inner 'if' condition is always true. Signed-off-by:
-
YueHaibing authored
Remove boilerplate code by using macro module_pci_driver. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
