- 21 Dec, 2010 35 commits
-
-
Eddie Wai authored
Various error conditions inside ep_connect and ep_disconnect were either not being handled or not being handled correctly. This patch fixes all those issues. Signed-off-by:
Eddie Wai <eddie.wai@broadcom.com> Acked-by:
Anil Veerabhadrappa <anilgv@broadcom.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Eddie Wai authored
Added the handling for cases when a chip request is made to the CNIC module but the hardware is not ready to accept. This would lead to many unnecessary wait timeouts. This code adds check in the connect establishment and destruction path. Signed-off-by:
-
Eddie Wai authored
The stop path has been augmented to wait a max of 10s for all in progress offload and destroy activities to complete before proceeding to terminate all active connections (via iscsid or forcefully). Note that any new offload and destroy requests are now blocked and return to the caller immediately. Signed-off-by:
Benjamin Li <benli@broadcom.com> Reviewed-by:
Michael Chan <mchan@broadcom.com> Reviewed-by:
-
Eddie Wai authored
The code no longer needs to dynamically register and unregister the CNIC device. The CNIC device will be kept registered until module unload. Signed-off-by:
-
Eddie Wai authored
Added net_dev mutex lock protection before accessing the csk parameters. Signed-off-by:
-
Eddie Wai authored
In the situation where the connect completion response arrives after the connect request has already timed out, the connection was not being aborted but only the resource was being freed. This creates a problem for 5771X (10g) as the chip flags this with an assertion. This change will properly aborts the connection before freeing the resource. Signed-off-by:
-
Eddie Wai authored
Modified the handling of the remote TCP RST code so the chip can now flush the tx pipe accordingly upon a remote TCP RST reception. Signed-off-by:
-
Eddie Wai authored
A cid leak issue was found when the connect destroy request exceeded the driver's disconnection timeout. This will lead to a cid resource leak issue. The fix is to allow the cid cleanup even when this happens. Signed-off-by:
-
Eddie Wai authored
Added a be32_to_cpu call for the TMF LUN wqe. Signed-off-by:
-
Eddie Wai authored
The patch fixes the following situations where NOP-Out pkt is called for: - local unsolicited NOP-Out requests (requesting no NOP-In response) - local NOP-Out responses to unsolicited NOP-In requests kernel panic is observed due to double session spin_lock requests; one in the bnx2i_process_nopin_local_cmpl routine in bnx2i_hwi.c and the other in the iscsi_put_task routine in libiscsi.c The proposed fix is to export the currently static __iscsi_put_task() routine and have bnx2i call it directly instead of the iscsi_put_task() routine which holds the session spin lock. Signed-off-by:
-
Eddie Wai authored
Unsolicited NOP-Ins are placed in the receive queue of the hardware which requires to be read out regardless if the receive pipe is suspended or not. This patch adds the disposal of this RQ element under this condition. Also fixed the bug in the unsolicited NOP-In handling routine which checks for the RESERVED_ITT. Signed-off-by:
-
Kashyap, Desai authored
Signed-off-by:
Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by:
-
Kashyap, Desai authored
Changing debug print to correct string. Signed-off-by:
-
Kashyap, Desai authored
Fix oops loading driver when there is direct attached SEP device The driver set max phys count to the value reported in sas iounit page zero. However this page doesn't take into account additional virutal phys. When sas topology event arrives, the phy count is larger than expected, and the driver accesses memory array beyond the end of allocated space, then oops. Manufacturing page 8 contains the info on direct attached phys. For this fix will making sure that sas topology event is not processing phys greater than the expected phy count. Signed-off-by:
-
Kashyap, Desai authored
change_queue_depth callback API changed The change_queue_depth callback changed where there is now an additional parameter called reason, with SCSI_QDEPTH_DEFAULT, SCSI_QDEPTH_QFULL, and SCSI_QDEPTH_RAMP_UP codes. Signed-off-by:
-
Kashyap, Desai authored
remove support for MPI2_EVENT_TASK_SET_FULL This event is obsoleted, so this processing of this event needs to be removed from the driver. The controller firmware is going to handle TASK_SET_FULL, the driver doesn't need to do anything. Even though we are removing the EVENT handling, the behavour has not changed between driver versions becuase fimrware will still be handling queue throttling, and retrying of commands when the target device queues are full. Signed-off-by:
-
Kashyap, Desai authored
MPI2 Rev header files. 1) Removed Task Set Full Event. Modified description of Disable SCSI Initiator Task Set Full Handling bit in the Flags field of IO Unit Page 1. Modified the descriptions for the three queue depth fields in SAS IO Unit Page 1. (2) Added new value for the Current Operation bits of the Flags field in the RAID Volume Indicator Structure to indicate that the Make Data Consistent operation is running. (3) Added a value of 0x6 to various SAS link rate fields to indicate an attached PHY that is not using any commonly supported settings. (4) Added Volume Not Consistent bit to the VolumeStatusFlags field of RAID Volume Page 0. (5) Added a new value for the IncompatibleReason field of RAID Physical Disk Page 0 to indicate an incompatible media type. (6) Added Diagnostic Data Upload tool for the Toolbox Request. Signed-off-by:
-
Kashyap, Desai authored
Issue : Switch swap doesn't work when device missing delay is enabled. (1) add support to individually add and remove phys to and from existing ports. This replaces the routine _transport_delete_duplicate_port. (2) _scsih_sas_host_refresh - was modified to change the link rate from zero to 1.5 GB rate when the firmware reports there is an attached device with zero link. (3) add new function mpt2sas_device_remove, this is wrapper function deletes some redundant code through out driver by combining into one subrountine (4) two subroutines were modified so the sas_device, raid_device, and port lists are traversed once when objects are deleted from the list. Previously it was looping back each time an object was deleted from the list. Signed-off-by:
-
Kashyap, Desai authored
Create a pool of chain buffers, instead of dedicated per IO: This enahancment is to address memory allocation failure when asking for more than 2300 IOs per host. There is just not enough contiquious DMA physical memory to make one single allocation to hold both message frames and chain buffers when asking for more than 2300 request. In order to address this problem we will have to allocate memory for each chain buffer in a seperate individual memory allocation, placing each chain element of 128 bytes onto a pool of available chains, which can be shared amoung all request. Signed-off-by:
-
Kashyap, Desai authored
Ability to override/set the ReportDeviceMissingDelay and IODeviceMissingDelay from driver: Add new command line option missing_delay, this is an array, where the first element is the device missing delay, and the second element is io missing delay. The driver will program sas iounit page 1 with the new setting when the driver loads. This is programmed to the current and persistent configuration page so this takes immediately, as will be sticky across host reboots. Signed-off-by:
-
Kashyap, Desai authored
Sometime it is seen that controller firmware returns an invalid system message id (smid). the oops is occurring becuase mpt_callbacks pointer is referenced to either null or invalid virtual address. this is due to cb_idx set incorrectly from routine _base_get_cb_idx. the cb_idx was set incorrectly becuase there is no check to make sure smid is less than maxiumum anticapted smid. to fix this issue, we add a check in _base_get_cb_idx to make sure smid is not greater than ioc->hba_queue_depth. in addition, a similar check was added to make sure the reply address was less than the largest anticapated address. Newer firmware has sovled this issue, however it good to have this sanity check. Signed-off-by:
-
Kashyap, Desai authored
The compiler throws warning messages while compiling without CONFIG_SCSI_MPT2SAS_LOGGING. Set proper ifdef for CONFIG_SCSI_MPT2SAS_LOGGING to avoid warnnings. Signed-off-by:
-
James Smart authored
Signed-off-by:
Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Added support for ELS RRQ command - Add new routine lpfc_set_rrq_active() to track XRI qualifier state. - Add new module parameter lpfc_enable_rrq to control RRQ operation. - Add logic to ELS RRQ completion handler and xri qualifier timeout to clear XRI qualifier state. - Use OX_ID from XRI_ABORTED_CQE for RRQ payload. - Tie abort and XRI_ABORTED_CQE andler to RRQ generation. Signed-off-by:
-
James Smart authored
Add SLI4 FC Discovery support - Replace READ_LA and READ_LA64 with READ_TOPOLOGY mailbox command. - Converted the old READ_LA structure to use bf_set/get instead of bit fields. - Rename HBA_FCOE_SUPPORT flag to HBA_FCOE_MODE. Flag now indicates function is running as SLI-4 FC or FCoE port. Make sure flag reset each time READ_REV completed as it can dynamically change. - Removed BDE union in the READ_TOPOLOGY mailbox command and added a define to define the ALPA MAP SIZE. Added FC Code for async events. - Added code to support new 16G link speed. - Define new set of values to keep track of valid user settable link speeds. - Used new link speed definitions to define link speed max and bitmap. - Redefined FDMI Port sppeds to be hax values and added the 16G value. - Added new CQE trailer code for FC Events. - Add lpfc_issue_init_vfi and lpfc_init_vfi_cmpl routines. - Replace many calls to the initial_flogi routine with lpfc_issue_init_vfi. - Add vp and vpi fields to the INIT_VFI mailbox command. - Addapt lpfc_hba_init_link routine for SLI4 use. - Use lpfc_hba_init_link call from lpfc_sli4_hba_setup. - Add a check for FC mode to register the FCFI before init link. - Convert lpfc_sli4_init_vpi to be called without a vpi (get it from vport). Signed-off-by:
-
James Smart authored
- Add the Lancer FC and FCoE PCI IDs - Add new SLI4 INTF register definitions - Implement new SLI4 doorbell register Signed-off-by:
-
James Smart authored
Fix critical errors and crashes - Replace LOF_SECURITY with LOG_SECURITY - When calculating diag test memory size, use full size with header. - Return LS_RJT with status=UNSUPPORTED on unrecognized ELS's - Correct NULL pointer dereference when lpfc_create_vport_work_array() returns NULL. - Added code to handle CVL when port is in LPFC_VPORT_FAILED state. - In lpfc_do_scr_ns_plogi, check the nodelist for FDMI_DID and reuse the resource. - Check for generic request 64 and calculate the sgl offset for the request and reply sgls, also calculate the xmit length using only the request bde. Signed-off-by:
-
James Bottomley authored
The current code in scsi_eh_target_reset() has an off by one error that actually sends spurious extra resets. Since there's no real need to reset the targets in numerical order, simply chunk up the command recovery list doing target resets and pulling matching targets out of the list (that also makes the loop O(N) instead of O(N^2). [mike christie found and fixed a list_splice -> list_splice_init problem] Reported-by: Hillf Danton<dhillf@gmail.com> Signed-off-by: -
Wayne Boyer authored
The definition for the mailbox register for new adapters was incorrect. The value has been updated to the correct offset. After an adapter reset, the mailbox register on the new adapters takes a number of seconds to stabilize. A delay has been added before reading the register. Signed-off-by:
Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Wayne Boyer authored
The lun value was not getting set up correctly for all devices attached to the new 64 bit adapters. The fix is to move the logic to earlier in the ipr_init_res_entry routine such that the value does get set correctly for all devices. Then the ipr_is_same_device comparison function was using the wrong lun value in the logic for the new adapters. Change this to use the correct lun value. Signed-off-by:
-
Luben Tuikov authored
Some kernel transport drivers unconditionally disable retrieval of the Caching mode page. One such for example is the BBB/CBI transport over USB. Such a restraint is too harsh as some devices do support the Caching mode page. Unconditionally enabling the retrieval of this mode page over those transports at their transport code level may result in some devices failing and becoming unusable. This patch implements a method of retrieving the Caching mode page without unconditionally enabling it in the transports which unconditionally disable it. The idea is to ask for all supported pages, page code 0x3F, and then search for the Caching mode page in the mode parameter data returned. The sd driver already asks for all the mode pages supported by the attached device by setting the page code to 0x3F in order to find out if the media is write protected by reading the WP bit in the Device Specific Parameter field. It then attempts to retrieve only the Caching mode page by setting the page code to 8 and actually attempting to retrieve it if and only if the transport allows it. The method implemented here is that if the transport doesn't allow retrieval of the Caching mode page and the device is not RBC, then we ask for all pages supported by setting the page code to 0x3F (similarly to how the WP bit is retrieved above), and then we search for the Caching mode page in the mode parameter data returned. With this patch, devices over SATA, report this (no change): Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Smart devices report their Caching mode page. This is a change where we'd previously see the kernel making assumption about the device's cache being write-through: Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0 Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] 610472646 4096-byte logical blocks: (2.50 TB/2.27 TiB) Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write Protect is off Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08 Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA And "dumb" devices over BBB, are correctly shown not to support reporting the Caching mode page: Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB) Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Write Protect is off Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] No Caching mode page present Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through Signed-off-by:
Luben Tuikov <ltuikov@yahoo.com> Signed-off-by:
-
Dan Williams authored
To date libsas has only looked at the attached sas address when determining the formation of wide ports. The specification and some hardware expects that phys with different addresses will not form a wide port unless the local peer phys also match each other. Introduce a flag to select stricter behavior at sas_register_ha() time. The flag can be dropped once it is known that all libsas users expect the same behavior. Current drivers just initialize this field to zero and get the traditional behavior. Reported-by:
Patrick Thomson <patrick.s.thomson@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Alan Stern authored
This patch (as1415) improves the formerly incomprehensible logic in sd_media_changed() (the current code refers to "changed" as a state, whereas in fact it is a relation between two states). It also adds a big comment so that everyone can understand what is really going on. The patch also improves efficiency by not reporting a media change when no medium was ever present. If no medium was present the last time we checked and there's still no medium, it's not necessary to tell the caller that a change occurred. Doing so merely causes the caller to attempt to revalidate a non-existent disk, which is a waste of time. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
James Bottomley authored
The current doc still says we call it with the host lock held, which is going to cause confusion. Signed-off-by:
-
- 20 Dec, 2010 1 commit
-
-
Jing Huang authored
Rename log_level to bfa_log_level to make the global variable more bfa specific and avoid clashes with other drivers which was causing a build failure. Signed-off-by:
Jing Huang <huangj@brocade.com> Signed-off-by:
-
- 16 Dec, 2010 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ghash-intel - ghash-clmulni-intel_glue needs err.h
-
- 15 Dec, 2010 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix typo which broke '..' detection in ext4_find_entry() ext4: Turn off multiple page-io submission by default
-
Jeremy Fitzhardinge authored
Without this, gcc 4.5 won't compile xen-netfront and xen-blkfront, where this is being used to specify array sizes. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: David Miller <davem@davemloft.net> Cc: Stable Kernel <stable@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
