- 16 Aug, 2023 1 commit
-
-
Diogo Ivo authored
The LPM102A188A is a 10.2" 2560x1800 IPS panel found in the Google Pixel C. Signed-off-by:
Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230807133307.27456-2-diogo.ivo@tecnico.ulisboa.pt
-
- 14 Aug, 2023 5 commits
-
-
David Heidelberg authored
Use the dev_err_probe() helper to simplify error handling during probe. This also handle scenario, when EDEFER is returned and useless error is printed. Fixes error: panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517 Signed-off-by:
David Heidelberg <david@ixit.cz> Reviewed-by:
-
David Heidelberg authored
Link is no longer functional and web.archive.org doesn't provide PDF with detail information. Some informations can be found from web.archive.org here: https://web.archive.org/web/20170629205602/http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheetSigned-off-by:
-
Thomas Weber authored
Add support for the Mitsubishi AA084XE01 panel which is an 8.4 inch XGA TFT-LCD module for industrial use. Link: https://www.mouser.fr/datasheet/2/274/aa084xe01_e-364171.pdfSigned-off-by:
Thomas Weber <thomas.weber@corscience.de> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
-
Miquel Raynal authored
Add Mitsubishi AA084XE01 8.4" XGA TFT LCD panel compatible string. Link: https://www.mouser.fr/datasheet/2/274/aa084xe01_e-364171.pdfSigned-off-by:
-
Liu Ying authored
Add the device link when panel bridge is attached and delete the link when panel bridge is detached. The drm device is the consumer while the panel device is the supplier. This makes sure that the drm device suspends eariler and resumes later than the panel device, hence resolves problems where the order is reversed, like the problematic case mentioned in the below link. Link: https://lore.kernel.org/lkml/CAPDyKFr0XjrU_udKoUKQ_q8RWaUkyqL+8fV-7s1CTMqi7u3-Rg@mail.gmail.com/T/Suggested-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Liu Ying <victor.liu@nxp.com> Reviewed-by:
-
- 12 Aug, 2023 6 commits
-
-
Jonas Karlman authored
Add missing call to crtc reset helper to properly vblank reset. Also move vop2_crtc_reset and call vop2_crtc_destroy_state to simplify and remove duplicated code. Fixes: 604be855 ("drm/rockchip: Add VOP2 driver") Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230621223311.2239547-6-jonas@kwiboo.se
-
Jonas Karlman authored
It's possible for users to try to duplicate the CRTC state even when the state doesn't exist. drm_atomic_helper_crtc_duplicate_state() (and other users of __drm_atomic_helper_crtc_duplicate_state()) already guard this with a WARN_ON() instead of crashing, so let's do that here too. Fixes: 604be855 ("drm/rockchip: Add VOP2 driver") Signed-off-by:
-
Jonas Karlman authored
Allocation of crtc_state may fail in vop_crtc_reset, causing an invalid pointer to be passed to __drm_atomic_helper_crtc_reset. Fix this by adding a NULL check of crtc_state, similar to other drivers. Fixes: 01e2eaf4 ("drm/rockchip: Convert to using __drm_atomic_helper_crtc_reset() for reset.") Signed-off-by:
-
Jonas Karlman authored
vop_plane_destroy and vop_crtc_destroy are plain wrappers around drm_plane_cleanup and drm_crtc_cleanup. Use them directly as plane and crtc funcs to closer match VOP2 driver. Signed-off-by:
-
Jonas Karlman authored
struct rockchip_crtc_state members such as output_type, output_bpc and enable_afbc is always reset to zero in the atomic_duplicate_state crtc funcs. Fix this by using kmemdup on the subclass rockchip_crtc_state struct. Fixes: 4e257d9e ("drm/rockchip: get rid of rockchip_drm_crtc_mode_config") Signed-off-by:
-
Harshit Mogalapalli authored
There are two problems in lsdc_pixel_pll_setup() 1. If kzalloc() fails then call iounmap() to release the resources. 2. Both kzalloc and ioremap does not return error pointers on failure, so using IS_ERR_OR_NULL() checks is a bit confusing and not very right, fix this by changing those to NULL checks instead. Fixes: f39db26c ("drm: Add kms driver for loongson display controller") Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by:
Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by:
Sui Jingfeng <sui.jingfeng@linux.dev> Link: https://patchwork.freedesktop.org/patch/msgid/20230720123950.543082-1-harshit.m.mogalapalli@oracle.com
-
- 11 Aug, 2023 6 commits
-
-
Alexander Stein authored
atomic_get_input_bus_fmts is only implemented for LVDS decoders, resulting that LVDS encoders only support bus format MEDIA_BUS_FMT_FIXED. This results in warnings like: mxsfb 21c8000.lcdif: Bridge does not provide bus format, assuming MEDIA_BUS_FMT_RGB888_1X24. Please fix bridge driver by handling atomic_get_input_bus_fmts. Fix this by reusing lvds_codec_atomic_get_input_bus_fmts currently used for LVDS decoders. Use RGB888_1X24 for LVDS encoders. This also allows removing the dedicated struct drm_bridge_funcs for decoders. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
Marek Szyprowski authored
Samsung DSIM used in older Exynos SoCs (like Exynos 4210, 4x12, 3250) doesn't report empty level of packer header FIFO. In case of those SoCs, use the old way of waiting for empty command tranfsfer FIFO, removed recently by commit 14806c64 ("drm: bridge: samsung-dsim: Drain command transfer FIFO before transfer"). Fixes: 14806c64 ("drm: bridge: samsung-dsim: Drain command transfer FIFO before transfer") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Randy Dunlap authored
Three DRM bridge drivers select GENERIC_PHY_MIPI_DPHY when GENERIC_PHY might not be set. This causes Kconfig warnings and a build error. WARNING: unmet direct dependencies detected for GENERIC_PHY_MIPI_DPHY Depends on [n]: GENERIC_PHY [=n] Selected by [y]: - DRM_NWL_MIPI_DSI [=y] && DRM_BRIDGE [=y] && DRM [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y] - DRM_SAMSUNG_DSIM [=y] && DRM [=y] && DRM_BRIDGE [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y] (drm/bridge/cadence/Kconfig was found by inspection.) aarch64-linux-ld: drivers/gpu/drm/bridge/samsung-dsim.o: in function `samsung_dsim_set_phy_ctrl': drivers/gpu/drm/bridge/samsung-dsim.c:731: undefined reference to `phy_mipi_dphy_get_default_config_for_hsclk' Prevent these warnings and build error by also selecting GENERIC_PHY whenever selecting GENERIC_PHY_MIPI_DPHY. Fixes: fced5a36 ("drm/bridge: cdns: Convert to phy framework") Fixes: 44cfc623 ("drm/bridge: Add NWL MIPI DSI host controller support") Fixes: 171b3b1e ("drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Aleksandr Nogikh <nogikh@google.com> Link: lore.kernel.org/r/20230803144227.2187749-1-nogikh@google.com Cc: Adam Ford <aford173@gmail.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Guido Günther <agx@sigxcpu.org> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Robert Foss <rfoss@kernel.org> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Adam Ford <aford173@gmail.com> Tested-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
-
Marek Vasut authored
The ULPS EXIT is initialized to 0xaf in downstream BSP as well as older revisions of this patchset, in newer revisions of the DSIM patchset it was left out and set to 0. Fix it. Fixes: 4d562c70 ("drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support") Signed-off-by:
-
Karolina Stolarek authored
Satisfy MMU dependency when testing TTM with KUnit. This fixes compilation errors on platforms that don't select this option by default. Signed-off-by:
Karolina Stolarek <karolina.stolarek@intel.com> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308110133.f0lhFwMV-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202308111032.enU8IisR-lkp@intel.com/Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230811113649.697886-1-karolina.stolarek@intel.comSigned-off-by:
-
Stanislaw Gruszka authored
Add comments regarding new DRM_IVPU_PARAM_CAPABILITIES param. Signed-off-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230810080707.3545883-1-stanislaw.gruszka@linux.intel.com
-
- 10 Aug, 2023 11 commits
-
-
Dave Airlie authored
I think there are limit checks in place for most things but the new uAPI wants to not have them. Add a limit check and use the vmemdup_user helper instead. Signed-off-by:
Dave Airlie <airlied@redhat.com> Reviewed-by:
Danilo Krummrich <dakr@redhat.com> Signed-off-by:
-
Jagan Teki authored
RV1126 MIPI DSI supports V1.2 DPHY with 4 lanes and 1Gbps transfer rate for lane. Add support for it. Signed-off-by:
Jagan Teki <jagan@edgeble.ai> Signed-off-by:
-
Jagan Teki authored
Document the MIPI DSI for Rockchip RV1126, which is different from other SoCs variants. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Jagan Teki authored
RV1126 VOP_LITE supports the video output processing ofMIPI DSI, RGB display interfaces with max output resolution of 1920x1080. Add support for rv1126 vop. Signed-off-by:
-
Jagan Teki authored
The VOP on Rockchip's RV1126 SoC is different from other SoC's VOP implementations, so add a separate compatible for it. Signed-off-by:
-
Yue Haibing authored
Commit cd3a8a59 ("drm/ttm: remove ttm_bo_(un)lock_delayed_workqueue") removed the implementations but not the declarations. Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Reviewed-by:
-
Danilo Krummrich authored
drm_exec_prepare_obj() and drm_exec_prepare_array() both reserve dma-fence slots and hence a dma_resv_list without ever freeing it. Make sure to call drm_gem_private_object_fini() for each GEM object passed to drm_exec_prepare_obj()/drm_exec_prepare_array() throughout the test to fix this up. While at it, remove some trailing empty lines. Fixes: 9710631c ("drm: add drm_exec selftests v4") Signed-off-by:
-
Miquel Raynal authored
On the SoC host controller, the pixel clock can be: * standard: data is launched on the rising edge * inverted: data is launched on the falling edge Some panels may need the inverted option to be used so let's support this DRM flag. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230609144843.851327-1-miquel.raynal@bootlin.com
-
Dmitry Osipenko authored
Panfrost IRQ handler may stuck for a long time, for example this happens when there is a bad HDMI connection and HDMI handler takes a long time to finish processing, holding Panfrost. Make Panfrost's job timeout handler to sync IRQ before checking fence signal status in order to prevent spurious job timeouts due to a slow IRQ processing. Reviewed-by:
Steven Price <steven.price@arm.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # MediaTek MT8192 and MT8195 Chromebooks Signed-off-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by:
-
Christian König authored
Not really a common use case, but let's make sure that we don't accidentially break that somehow. CC: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
Christian König authored
GCC forbids to jump to labels in loop conditions and a new clang check stumbled over this. So instead using a local label inside the loop condition use an unique label outside of it. Fixes: 09593216 ("drm: execution context for GEM buffers v7") Link: https://gcc.gnu.org/onlinedocs/gcc/Statement-Exprs.html Link: https://github.com/ClangBuiltLinux/linux/issues/1890 Link: https://github.com/llvm/llvm-project/commit/20219106060208f0c2f5d096eb3aed7b712f5067Reported-by:
Nathan Chancellor <nathan@kernel.org> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> CC: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
- 09 Aug, 2023 9 commits
-
-
Karolina Stolarek authored
Add KUnit tests that exercise page allocation using page pools and freeing pages, either by returning them to the pool or freeing them. Add a basic test for ttm_pool cleanup. Introduce helpers to create a dummy ttm_buffer_object. Signed-off-by:
-
Karolina Stolarek authored
Test initialization and cleanup of the ttm_device struct, including some error paths. Verify the creation of page pools if use_dma_alloc param is true. Signed-off-by:
-
Karolina Stolarek authored
Add the initial version of unit tests for ttm_device struct, together with helper functions. Signed-off-by:
-
Stanislaw Gruszka authored
Add support VPU 4 - new generation of VPU IP with various hardware design improvements. From driver point of view, it differs in register set, initialization process and MMU memory ranges. Co-developed-by:
Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Signed-off-by:
Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Signed-off-by:
Karol Wachowski <karol.wachowski@linux.intel.com> Signed-off-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by:
-
Karol Wachowski authored
Add new dma range and change naming convention for virtual address memory ranges managed by KMD. New available ranges are named as follows: * global range - global context accessible by FW * aliased range - user context accessible by FW * dma range - user context accessible by DMA * shave range - user context accessible by shaves * global shave range - global context accessible by shave nn Signed-off-by:
-
Stanislaw Gruszka authored
Add DRM_IVPU_PARAM_CAPABILITIES parameters to get_param ioctl to query driver capabilities. For now use it for identify metric streamer and new dma memory range features. Currently upstream version of intel_vpu does not have those, they will be added it the future. Reviewed-by:
-
Jacek Lawrynowicz authored
Use VPU IP generation for naming FW instead of the platform name. Signed-off-by:
-
Jacek Lawrynowicz authored
Given that VPU generation can be used by multiple platforms, driver should use VPU IP generation names instead of a platform. Change naming for functions and registries. Use 37XX format, where: 3 - major VPU IP generation version 7 - minor VPU IP generation version XX - postfix indicating this is an architecture and not marketing name Signed-off-by:
-
Jacek Lawrynowicz authored
Given that VPU generation can be used by multiple platforms, driver should use VPU IP generation in names instead of a platform. Change naming for sources files. Use 37XX format, where: 3 - major VPU IP generation version 7 - minor VPU IP generation version XX - postfix indicating this is an architecture and not marketing name Signed-off-by:
-
- 08 Aug, 2023 2 commits
-
-
Faith Ekstrand authored
The flags field in drm_syncobj_find_fence() takes SYNCOBJ_WAIT flags from the syncobj UAPI whereas sync->flags is from the nouveau UAPI. What we actually want is 0 flags which tells it to just try to find the fence and then return without waiting. Fixes: b88baab8 ("drm/nouveau: implement new VM_BIND uAPI") Cc: Danilo Krummrich <dakr@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by:
Faith Ekstrand <faith.ekstrand@collabora.com> Signed-off-by:
-
Danilo Krummrich authored
VMAs can find their corresponding VM through their embedded struct drm_gpuva which already carries a pointer to a struct drm_gpuva_manager which the VM is based on. Hence, remove the struct nouveau_uvmm pointer from struct nouveau_uvma to save a couple of bytes per mapping. Reviewed-by:
-
