1. 09 Jan, 2018 38 commits
    • Heiner Kallweit's avatar
      r8169: improve runtime pm in general and suspend unused ports · a92a0849
      Heiner Kallweit authored
      So far rpm doesn't cover cases like unused ports which are never
      brought up. If they are active at probe time they remain in this state.
      Included in this patch:
      
      - Let the idle notification check whether we can suspend and let it
        schedule the suspend. This way we don't need to have calls to
        pm_schedule_suspend in different places.
      
      - At the end of rtl_open and rtl_init_one send an idle notification
        to allow suspending if the link is down. If a cable is plugged in
        aneg is finished before the suspend timer expires and the suspend
        request is cancelled.
      
      - Change rtl8169_runtime_suspend to power down the chip if the
        interface is down.
      
      Successfully tested on a RTL8168evl (mac version 34).
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a92a0849
    • Heiner Kallweit's avatar
      r8169: improve runtime pm in rtl8169_check_link_status · ef4d5fcc
      Heiner Kallweit authored
      This patch partially reverts commit e4fbce74 "r8169: Fix runtime
      power management" from 2010. At that time the suspend delay was 100ms
      and therefore suspending happened during initial aneg. Currently
      suspend delay is 5s, so suspend starts after aneg and the issue
      doesn't exist any longer. On my system aneg takes almost 3s, to be on
      the safe side let's increase the suspend delay to 10s.
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ef4d5fcc
    • Heiner Kallweit's avatar
      r8169: remove unneeded rpm ops in rtl_shutdown · b9aa1c75
      Heiner Kallweit authored
      This patch reverts commit 2a15cd2f "r8169: runtime resume before
      shutdown" from 2012. Few months after this change the underlying issue
      was solved in the PCI core with commit 3ff2de9b "PCI/PM: Resume
      device before shutdown".
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b9aa1c75
    • David S. Miller's avatar
      Merge branch 'tipc-improvements-to-group-messaging' · fdb533c3
      David S. Miller authored
      Jon Maloy says:
      
      ====================
      tipc: improvements to group messaging
      
      We make a number of simplifications and improvements to the group
      messaging service. They aim at readability/maintainability of the code
      as well as scalability.
      
      The series is based on commit f9c935db ("tipc: fix problems with
      multipoint-to-point flow control) which has been applied to 'net' but
      not yet to 'net-next'.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fdb533c3
    • Jon Maloy's avatar
      tipc: improve poll() for group member socket · eb929a91
      Jon Maloy authored
      The current criteria for returning POLLOUT from a group member socket is
      too simplistic. It basically returns POLLOUT as soon as the group has
      external destinations, something obviously leading to a lot of spinning
      during destination congestion situations. At the same time, the internal
      congestion handling is unnecessarily complex.
      
      We now change this as follows.
      
      - We introduce an 'open' flag in  struct tipc_group. This flag is used
        only to help poll() get the setting of POLLOUT right, and *not* for
        congeston handling as such. This means that a user can choose to
        ignore an  EAGAIN for a destination and go on sending messages to
        other destinations in the group if he wants to.
      
      - The flag is set to false every time we return EAGAIN on a send call.
      
      - The flag is set to true every time any member, i.e., not necessarily
        the member that caused EAGAIN, is removed from the small_win list.
      
      - We remove the group member 'usr_pending' flag. The size of the send
        window and presence in the 'small_win' list is sufficient criteria
        for recognizing congestion.
      
      This solution seems to be a reasonable compromise between 'anycast',
      which is normally not waiting for POLLOUT for a specific destination,
      and the other three send modes, which are.
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eb929a91
    • Jon Maloy's avatar
      tipc: improve groupcast scope handling · 232d07b7
      Jon Maloy authored
      When a member joins a group, it also indicates a binding scope. This
      makes it possible to create both node local groups, invisible to other
      nodes, as well as cluster global groups, visible everywhere.
      
      In order to avoid that different members end up having permanently
      differing views of group size and memberhip, we must inhibit locally
      and globally bound members from joining the same group.
      
      We do this by using the binding scope as an additional separator between
      groups. I.e., a member must ignore all membership events from sockets
      using a different scope than itself, and all lookups for message
      destinations must require an exact match between the message's lookup
      scope and the potential target's binding scope.
      
      Apart from making it possible to create local groups using the same
      identity on different nodes, a side effect of this is that it now also
      becomes possible to create a cluster global group with the same identity
      across the same nodes, without interfering with the local groups.
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      232d07b7
    • Jon Maloy's avatar
      tipc: add option to suppress PUBLISH events for pre-existing publications · 8348500f
      Jon Maloy authored
      Currently, when a user is subscribing for binding table publications,
      he will receive a PUBLISH event for all already existing matching items
      in the binding table.
      
      However, a group socket making a subscriptions doesn't need this initial
      status update from the binding table, because it has already scanned it
      during the join operation. Worse, the multiplicatory effect of issuing
      mutual events for dozens or hundreds group members within a short time
      frame put a heavy load on the topology server, with the end result that
      scale out operations on a big group tend to take much longer than needed.
      
      We now add a new filter option, TIPC_SUB_NO_STATUS, for topology server
      subscriptions, so that this initial avalanche of events is suppressed.
      This change, along with the previous commit, significantly improves the
      range and speed of group scale out operations.
      
      We keep the new option internal for the tipc driver, at least for now.
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8348500f
    • Jon Maloy's avatar
      tipc: send out join messages as soon as new member is discovered · d12d2e12
      Jon Maloy authored
      When a socket is joining a group, we look up in the binding table to
      find if there are already other members of the group present. This is
      used for being able to return EAGAIN instead of EHOSTUNREACH if the
      user proceeds directly to a send attempt.
      
      However, the information in the binding table can be used to directly
      set the created member in state MBR_PUBLISHED and send a JOIN message
      to the peer, instead of waiting for a topology PUBLISH event to do this.
      When there are many members in a group, the propagation time for such
      events can be significant, and we can save time during the join
      operation if we use the initial lookup result fully.
      
      In this commit, we eliminate the member state MBR_DISCOVERED which has
      been the result of the initial lookup, and do instead go directly to
      MBR_PUBLISHED, which initiates the setup.
      
      After this change, the tipc_member FSM looks as follows:
      
           +-----------+
      ---->| PUBLISHED |-----------------------------------------------+
      PUB- +-----------+                                 LEAVE/WITHRAW |
      LISH       |JOIN                                                 |
                 |     +-------------------------------------------+   |
                 |     |                            LEAVE/WITHDRAW |   |
                 |     |                +------------+             |   |
                 |     |   +----------->|  PENDING   |---------+   |   |
                 |     |   |msg/maxactv +-+---+------+  LEAVE/ |   |   |
                 |     |   |              |   |       WITHDRAW |   |   |
                 |     |   |   +----------+   |                |   |   |
                 |     |   |   |revert/maxactv|                |   |   |
                 |     |   |   V              V                V   V   V
                 |   +----------+  msg  +------------+       +-----------+
                 +-->|  JOINED  |------>|   ACTIVE   |------>|  LEAVING  |--->
                 |   +----------+       +--- -+------+ LEAVE/+-----------+DOWN
                 |        A   A               |      WITHDRAW A   A    A   EVT
                 |        |   |               |RECLAIM        |   |    |
                 |        |   |REMIT          V               |   |    |
                 |        |   |== adv   +------------+        |   |    |
                 |        |   +---------| RECLAIMING |--------+   |    |
                 |        |             +-----+------+  LEAVE/    |    |
                 |        |                   |REMIT   WITHDRAW   |    |
                 |        |                   |< adv              |    |
                 |        |msg/               V            LEAVE/ |    |
                 |        |adv==ADV_IDLE+------------+   WITHDRAW |    |
                 |        +-------------|  REMITTED  |------------+    |
                 |                      +------------+                 |
                 |PUBLISH                                              |
      JOIN +-----------+                                LEAVE/WITHDRAW |
      ---->|  JOINING  |-----------------------------------------------+
           +-----------+
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d12d2e12
    • Jon Maloy's avatar
      tipc: simplify group LEAVE sequence · c2b22bcf
      Jon Maloy authored
      After the changes in the previous commit the group LEAVE sequence
      can be simplified.
      
      We now let the arrival of a LEAVE message unconditionally issue a group
      DOWN event to the user. When a topology WITHDRAW event is received, the
      member, if it still there, is set to state LEAVING, but we only issue a
      group DOWN event when the link to the peer node is gone, so that no
      LEAVE message is to be expected.
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c2b22bcf
    • Jon Maloy's avatar
      tipc: create group member event messages when they are needed · 7ad32bcb
      Jon Maloy authored
      In the current implementation, a group socket receiving topology
      events about other members just converts the topology event message
      into a group event message and stores it until it reaches the right
      state to issue it to the user. This complicates the code unnecessarily,
      and becomes impractical when we in the coming commits will need to
      create and issue membership events independently.
      
      In this commit, we change this so that we just notice the type and
      origin of the incoming topology event, and then drop the buffer. Only
      when it is time to actually send a group event to the user do we
      explicitly create a new message and send it upwards.
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7ad32bcb
    • Jon Maloy's avatar
      tipc: adjustment to group member FSM · 0233493a
      Jon Maloy authored
      Analysis reveals that the member state MBR_QURANTINED in reality is
      unnecessary, and can be replaced by the state MBR_JOINING at all
      occurrencs.
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0233493a
    • Jon Maloy's avatar
      tipc: let group member stay in JOINED mode if unable to reclaim · 4ea5dab5
      Jon Maloy authored
      We handle a corner case in the function tipc_group_update_rcv_win().
      During extreme pessure it might happen that a message receiver has all
      its active senders in RECLAIMING or REMITTED mode, meaning that there
      is nobody to reclaim advertisements from if an additional sender tries
      to go active.
      
      Currently we just set the new sender to ACTIVE anyway, hence at least
      theoretically opening up for a receiver queue overflow by exceeding the
      MAX_ACTIVE limit. The correct solution to this is to instead add the
      member to the pending queue, while letting the oldest member in that
      queue revert to JOINED state.
      
      In this commit we refactor the code for handling message arrival from
      a JOINED member, both to make it more comprehensible and to cover the
      case described above.
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4ea5dab5
    • Jon Maloy's avatar
      tipc: a couple of cleanups · 8d5dee21
      Jon Maloy authored
      - We remove the 'reclaiming' member list in struct tipc_group, since
        it doesn't serve any purpose.
      
      - We simplify the GRP_REMIT_MSG branch of tipc_group_protocol_rcv().
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8d5dee21
    • David S. Miller's avatar
      Merge branch 'ethtool-ringparam-upper-bound' · a67c01e2
      David S. Miller authored
      Tariq Toukan says:
      
      ====================
      ethtool ringparam upper bound
      
      This patchset by Jenny adds sanity checks in ethtool ringparam
      operation for input upper bounds, similarly to what's done in
      ethtool_set_channels.
      
      The checks are added in patch 1, using a call to get_ringparam
      prior to calling set_ringparam NDO.
      
      Patch 2 changes the function's behavior in mlx4_en, so that
      it returns an error for out-of-range input, instead of rounding
      it to closest valid, similar to mlx5e.
      
      Patch 3 removes the upper bound checks in mlx5e_ethtool_set_ringparam
      as it becomes redundant.
      
      Series generated against net-next commit:
      f66faae2 Merge branch 'ipv6-ipv4-nexthop-align'
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a67c01e2
    • Eugenia Emantayev's avatar
      net/mlx5e: Remove redundant checks in set_ringparam · bacc7943
      Eugenia Emantayev authored
      Since the checks are done in upper layer ethtool code,
      checks in driver are not needed any more.
      Signed-off-by: default avatarEugenia Emantayev <eugenia@mellanox.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bacc7943
    • Eugenia Emantayev's avatar
      net/mlx4_en: Align behavior of set ring size flow via ethtool · 7589fd5c
      Eugenia Emantayev authored
      In current implementation, any requested RX/TX ring size value
      that is less than minimum is silently casted to nearest valid value.
      Update this behavior to align with mlx5 behavior by printing warning
      in dmesg and remaining the size unchanged.
      Kernel is responsible for verifying against the maximum.
      Signed-off-by: default avatarEugenia Emantayev <eugenia@mellanox.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7589fd5c
    • Eugenia Emantayev's avatar
      ethtool: Ensure new ring parameters are within bounds during SRINGPARAM · 37e2d99b
      Eugenia Emantayev authored
      Add a sanity check to ensure that all requested ring parameters
      are within bounds, which should reduce errors in driver implementation.
      Signed-off-by: default avatarEugenia Emantayev <eugenia@mellanox.com>
      Signed-off-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      37e2d99b
    • Colin Ian King's avatar
      ipv6: use ARRAY_SIZE for array sizing calculation on array seg6_action_table · 709af180
      Colin Ian King authored
      Use the ARRAY_SIZE macro on array seg6_action_table to determine size of
      the array. Improvement suggested by coccinelle.
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      709af180
    • Colin Ian King's avatar
      be2net: use ARRAY_SIZE for array sizing calculation on array cmd_priv_map · 2b1eaa66
      Colin Ian King authored
      Use the ARRAY_SIZE macro on array cmd_priv_map to determine size of the
      array.  Improvement suggested by coccinelle.
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2b1eaa66
    • Jason Baron's avatar
      virtio_net: propagate linkspeed/duplex settings from the hypervisor · faa9b39f
      Jason Baron authored
      The ability to set speed and duplex for virtio_net is useful in various
      scenarios as described here:
      
      16032be5 virtio_net: add ethtool support for set and get of settings
      
      However, it would be nice to be able to set this from the hypervisor,
      such that virtio_net doesn't require custom guest ethtool commands.
      
      Introduce a new feature flag, VIRTIO_NET_F_SPEED_DUPLEX, which allows
      the hypervisor to export a linkspeed and duplex setting. The user can
      subsequently overwrite it later if desired via: 'ethtool -s'.
      
      Note that VIRTIO_NET_F_SPEED_DUPLEX is defined as bit 63, the intention
      is that device feature bits are to grow down from bit 63, since the
      transports are starting from bit 24 and growing up.
      Signed-off-by: default avatarJason Baron <jbaron@akamai.com>
      Cc: "Michael S. Tsirkin" <mst@redhat.com>
      Cc: Jason Wang <jasowang@redhat.com>
      Cc: virtio-dev@lists.oasis-open.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      faa9b39f
    • Felix Walter's avatar
      macsec: Add support for GCM-AES-256 cipher suite · ccfdec90
      Felix Walter authored
      This adds support for the GCM-AES-256 cipher suite as specified in
      IEEE 802.1AEbn-2011. The prepared cipher suite selection mechanism is used,
      with GCM-AES-128 being the default cipher suite as defined in the standard.
      Signed-off-by: default avatarFelix Walter <felix.walter@cloudandheat.com>
      Cc: Sabrina Dubroca <sd@queasysnail.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ccfdec90
    • David S. Miller's avatar
      Merge branch 'XDP-transmission-for-tuntap' · e8b18af8
      David S. Miller authored
      Jason Wang says:
      
      ====================
      XDP transmission for tuntap
      
      This series tries to implement XDP transmission (ndo_xdp_xmit) for
      tuntap. Pointer ring was used for queuing both XDP buffers and
      sk_buff, this is done by encoding the type into lowest bit of the
      pointer and storin XDP metadata in the headroom of XDP buff.
      
      Tests gets 3.05 Mpps when doing xdp_redirect_map from ixgbe to VM
      (testpmd + virtio-net in guest). This gives us ~20% improvments
      compared to use skb during redirect.
      
      Please review.
      
      Changes from V1:
      
      - slient warnings
      - fix typos
      - add skb mode number in the commit log
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e8b18af8
    • Jason Wang's avatar
      tuntap: XDP transmission · fc72d1d5
      Jason Wang authored
      This patch implements XDP transmission for TAP. Since we can't create
      new queues for TAP during XDP set, exist ptr_ring was reused for
      queuing XDP buffers. To differ xdp_buff from sk_buff, TUN_XDP_FLAG
      (0x1UL) was encoded into lowest bit of xpd_buff pointer during
      ptr_ring_produce, and was decoded during consuming. XDP metadata was
      stored in the headroom of the packet which should work in most of
      cases since driver usually reserve enough headroom. Very minor changes
      were done for vhost_net: it just need to peek the length depends on
      the type of pointer.
      
      Tests were done on two Intel E5-2630 2.40GHz machines connected back
      to back through two 82599ES. Traffic were generated/received through
      MoonGen/testpmd(rxonly). It reports ~20% improvements when
      xdp_redirect_map is doing redirection from ixgbe to TAP (from 2.50Mpps
      to 3.05Mpps)
      
      Cc: Jesper Dangaard Brouer <brouer@redhat.com>
      Signed-off-by: default avatarJason Wang <jasowang@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fc72d1d5
    • Jason Wang's avatar
      tun/tap: use ptr_ring instead of skb_array · 5990a305
      Jason Wang authored
      This patch switches to use ptr_ring instead of skb_array. This will be
      used to enqueue different types of pointers by encoding type into
      lower bits.
      Signed-off-by: default avatarJason Wang <jasowang@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5990a305
    • David S. Miller's avatar
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · ef7f8cec
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Frag and UDP handling fixes in i40e driver, from Amritha Nambiar and
          Alexander Duyck.
      
       2) Undo unintentional UAPI change in netfilter conntrack, from Florian
          Westphal.
      
       3) Revert a change to how error codes are returned from
          dev_get_valid_name(), it broke some apps.
      
       4) Cannot cache routes for ipv6 tunnels in the tunnel is ipv4/ipv6
          dual-stack. From Eli Cooper.
      
       5) Fix missed PMTU updates in geneve, from Xin Long.
      
       6) Cure double free in macvlan, from Gao Feng.
      
       7) Fix heap out-of-bounds write in rds_message_alloc_sgs(), from
          Mohamed Ghannam.
      
       8) FEC bug fixes from FUgang Duan (mis-accounting of dev_id, missed
          deferral of probe when the regulator is not ready yet).
      
       9) Missing DMA mapping error checks in 3c59x, from Neil Horman.
      
      10) Turn off Broadcom tags for some b53 switches, from Florian Fainelli.
      
      11) Fix OOPS when get_target_net() is passed an SKB whose NETLINK_CB()
          isn't initialized. From Andrei Vagin.
      
      12) Fix crashes in fib6_add(), from Wei Wang.
      
      13) PMTU bug fixes in SCTP from Marcelo Ricardo Leitner.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
        sh_eth: fix TXALCR1 offsets
        mdio-sun4i: Fix a memory leak
        phylink: mark expected switch fall-throughs in phylink_mii_ioctl
        sctp: fix the handling of ICMP Frag Needed for too small MTUs
        sctp: do not retransmit upon FragNeeded if PMTU discovery is disabled
        xen-netfront: enable device after manual module load
        bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine.
        bnxt_en: Fix population of flow_type in bnxt_hwrm_cfa_flow_alloc()
        sh_eth: fix SH7757 GEther initialization
        net: fec: free/restore resource in related probe error pathes
        uapi/if_ether.h: prevent redefinition of struct ethhdr
        ipv6: fix general protection fault in fib6_add()
        RDS: null pointer dereference in rds_atomic_free_op
        sh_eth: fix TSU resource handling
        net: stmmac: enable EEE in MII, GMII or RGMII only
        rtnetlink: give a user socket to get_target_net()
        MAINTAINERS: Update my email address.
        can: ems_usb: improve error reporting for error warning and error passive
        can: flex_can: Correct the checking for frame length in flexcan_start_xmit()
        can: gs_usb: fix return value of the "set_bittiming" callback
        ...
      ef7f8cec
    • Yang Shi's avatar
      net: tipc: remove unused hardirq.h · f4803f1b
      Yang Shi authored
      Preempt counter APIs have been split out, currently, hardirq.h just
      includes irq_enter/exit APIs which are not used by TIPC at all.
      
      So, remove the unused hardirq.h.
      Signed-off-by: default avatarYang Shi <yang.s@alibaba-inc.com>
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Tested-by: default avatarYing Xue <ying.xue@windriver.com>
      Cc: Jon Maloy <jon.maloy@ericsson.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f4803f1b
    • Yang Shi's avatar
      net: ovs: remove unused hardirq.h · 419091f1
      Yang Shi authored
      Preempt counter APIs have been split out, currently, hardirq.h just
      includes irq_enter/exit APIs which are not used by openvswitch at all.
      
      So, remove the unused hardirq.h.
      Signed-off-by: default avatarYang Shi <yang.s@alibaba-inc.com>
      Acked-by: default avatarPravin B Shelar <pshelar@ovn.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: dev@openvswitch.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      419091f1
    • Yang Shi's avatar
      net: caif: remove unused hardirq.h · 373372b3
      Yang Shi authored
      Preempt counter APIs have been split out, currently, hardirq.h just
      includes irq_enter/exit APIs which are not used by caif at all.
      
      So, remove the unused hardirq.h.
      Signed-off-by: default avatarYang Shi <yang.s@alibaba-inc.com>
      Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
      Cc: "David S. Miller" <davem@davemloft.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      373372b3
    • David S. Miller's avatar
      Merge branch 'net-netdev_WARN_ONCE' · f1f2b7c3
      David S. Miller authored
      Gal Pressman says:
      
      ====================
      Replace WARN_ONCE usages with netdev_WARN_ONCE
      
      This series will fix an issue in netdev_WARN_ONCE, improve its formatting and
      replace drivers' usage of WARN_ONCE to netdev_WARN_ONCE.
      
      Driver specific patches were compilation tested, in addition, functional tested
      on Mellanox NIC.
      
      v1->v2:
      - Addressed commit message comments in patch #1
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f1f2b7c3
    • Gal Pressman's avatar
      8139cp: Replace WARN_ONCE with netdev_WARN_ONCE · 9d0b967f
      Gal Pressman authored
      Use the more appropriate netdev_WARN_ONCE instead of WARN_ONCE macro.
      Signed-off-by: default avatarGal Pressman <galp@mellanox.com>
      Reviewed-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9d0b967f
    • Gal Pressman's avatar
      bnx2x: Replace WARN_ONCE with netdev_WARN_ONCE · 37ed41c4
      Gal Pressman authored
      Use the more appropriate netdev_WARN_ONCE instead of WARN_ONCE macro.
      Signed-off-by: default avatarGal Pressman <galp@mellanox.com>
      Reviewed-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Cc: Ariel Elior <ariel.elior@cavium.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      37ed41c4
    • Gal Pressman's avatar
      e1000: Replace WARN_ONCE with netdev_WARN_ONCE · e65c3e1d
      Gal Pressman authored
      Use the more appropriate netdev_WARN_ONCE instead of WARN_ONCE macro.
      Signed-off-by: default avatarGal Pressman <galp@mellanox.com>
      Reviewed-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e65c3e1d
    • Gal Pressman's avatar
      net/mlx5e: Replace WARN_ONCE with netdev_WARN_ONCE · cd4a87df
      Gal Pressman authored
      Use the more appropriate netdev_WARN_ONCE instead of WARN_ONCE macro.
      Signed-off-by: default avatarGal Pressman <galp@mellanox.com>
      Reviewed-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cd4a87df
    • Gal Pressman's avatar
      net: No line break on netdev_WARN* formatting · e1cfe3d0
      Gal Pressman authored
      Remove the unnecessary line break between the netdev name and reg state
      to the actual message that should be printed.
      
      For example, this:
      [86730.307236] ------------[ cut here ]------------
      [86730.313496] netdevice: enp27s0f0
      Message from the driver
      [...]
      
      Will be replaced with:
      [86770.259289] ------------[ cut here ]------------
      [86770.265191] netdevice: enp27s0f0: Message from the driver
      [...]
      Signed-off-by: default avatarGal Pressman <galp@mellanox.com>
      Reviewed-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e1cfe3d0
    • Gal Pressman's avatar
      net: Fix netdev_WARN_ONCE macro · 72dd831e
      Gal Pressman authored
      netdev_WARN_ONCE is broken (whoops..), this fix will remove the
      unnecessary "condition" parameter, add the missing comma and change
      "arg" to "args".
      
      Fixes: 375ef2b1 ("net: Introduce netdev_*_once functions")
      Signed-off-by: default avatarGal Pressman <galp@mellanox.com>
      Reviewed-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      72dd831e
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next · 9f0e896f
      David S. Miller authored
      Pablo Neira Ayuso says:
      
      ====================
      Netfilter/IPVS updates for net-next
      
      The following patchset contains Netfilter/IPVS updates for your
      net-next tree:
      
      1) Free hooks via call_rcu to speed up netns release path, from
         Florian Westphal.
      
      2) Reduce memory footprint of hook arrays, skip allocation if family is
         not present - useful in case decnet support is not compiled built-in.
         Patches from Florian Westphal.
      
      3) Remove defensive check for malformed IPv4 - including ihl field - and
         IPv6 headers in x_tables and nf_tables.
      
      4) Add generic flow table offload infrastructure for nf_tables, this
         includes the netlink control plane and support for IPv4, IPv6 and
         mixed IPv4/IPv6 dataplanes. This comes with NAT support too. This
         patchset adds the IPS_OFFLOAD conntrack status bit to indicate that
         this flow has been offloaded.
      
      5) Add secpath matching support for nf_tables, from Florian.
      
      6) Save some code bytes in the fast path for the nf_tables netdev,
         bridge and inet families.
      
      7) Allow one single NAT hook per point and do not allow to register NAT
         hooks in nf_tables before the conntrack hook, patches from Florian.
      
      8) Seven patches to remove the struct nf_af_info abstraction, instead
         we perform direct calls for IPv4 which is faster. IPv6 indirections
         are still needed to avoid dependencies with the 'ipv6' module, but
         these now reside in struct nf_ipv6_ops.
      
      9) Seven patches to handle NFPROTO_INET from the Netfilter core,
         hence we can remove specific code in nf_tables to handle this
         pseudofamily.
      
      10) No need for synchronize_net() call for nf_queue after conversion
          to hook arrays. Also from Florian.
      
      11) Call cond_resched_rcu() when dumping large sets in ipset to avoid
          softlockup. Again from Florian.
      
      12) Pass lockdep_nfnl_is_held() to rcu_dereference_protected(), patch
          from Florian Westphal.
      
      13) Fix matching of counters in ipset, from Jozsef Kadlecsik.
      
      14) Missing nfnl lock protection in the ip_set_net_exit path, also
          from Jozsef.
      
      15) Move connlimit code that we can reuse from nf_tables into
          nf_conncount, from Florian Westhal.
      
      And asorted cleanups:
      
      16) Get rid of nft_dereference(), it only has one single caller.
      
      17) Add nft_set_is_anonymous() helper function.
      
      18) Remove NF_ARP_FORWARD leftover chain definition in nf_tables_arp.
      
      19) Remove unnecessary comments in nf_conntrack_h323_asn1.c
          From Varsha Rao.
      
      20) Remove useless parameters in frag_safe_skb_hp(), from Gao Feng.
      
      21) Constify layer 4 conntrack protocol definitions, function
          parameters to register/unregister these protocol trackers, and
          timeouts. Patches from Florian Westphal.
      
      22) Remove nlattr_size indirection, from Florian Westphal.
      
      23) Add fall-through comments as -Wimplicit-fallthrough needs this,
          from Gustavo A. R. Silva.
      
      24) Use swap() macro to exchange values in ipset, patch from
          Gustavo A. R. Silva.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9f0e896f
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma · 44596f86
      Linus Torvalds authored
      Pull rdma fixes from Doug Ledford:
      
       - One line fix to mlx4 error flow (same as mlx5 fix in last pull
         request, just in the mlx4 driver)
      
       - Fix a race condition in the IPoIB driver. This patch is larger than
         just a one line fix, but resolves a race condition in a fairly
         straight forward manner
      
       - Fix a locking issue in the RDMA netlink code. This patch is also
         larger than I would like for a late -rc. It has, however, had a week
         to bake in the rdma tree prior to this pull request
      
       - One line fix to fix granting remote machine access to memory that
         they don't need and shouldn't have
      
       - One line fix to correct the fact that our sgid/dgid pair is swapped
         from what you would expect when receiving an incoming connection
         request
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
        IB/srpt: Fix ACL lookup during login
        IB/srpt: Disable RDMA access by the initiator
        RDMA/netlink: Fix locking around __ib_get_device_by_index
        IB/ipoib: Fix race condition in neigh creation
        IB/mlx4: Fix mlx4_ib_alloc_mr error flow
      44596f86
  2. 08 Jan, 2018 2 commits