1. 30 Nov, 2015 24 commits
  2. 29 Nov, 2015 12 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending · 36511e86
      Linus Torvalds authored
      Pull SCSI target fixes from Nicholas Bellinger:
       - fix tcm-user backend driver expired cmd time processing (agrover)
       - eliminate kref_put_spinlock_irqsave() for I/O completion (bart)
       - fix iscsi login kthread failure case hung task regression (nab)
       - fix COMPARE_AND_WRITE completion use-after-free race (nab)
       - fix COMPARE_AND_WRITE with SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC non zero
         SGL offset data corruption.  (Jan + Doug)
       - fix >= v4.4-rc1 regression for tcm_qla2xxx enable configfs attribute
         (Himanshu + HCH)
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
        target/stat: print full t10_wwn.model buffer
        target: fix COMPARE_AND_WRITE non zero SGL offset data corruption
        qla2xxx: Fix regression introduced by target configFS changes
        kref: Remove kref_put_spinlock_irqsave()
        target: Invoke release_cmd() callback without holding a spinlock
        target: Fix race for SCF_COMPARE_AND_WRITE_POST checking
        iscsi-target: Fix rx_login_comp hang after login failure
        iscsi-target: return -ENOMEM instead of -1 in case of failed kmalloc()
        target/user: Do not set unused fields in tcmu_ops
        target/user: Fix time calc in expired cmd processing
      36511e86
    • Linus Torvalds's avatar
      Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux · 75a29ec1
      Linus Torvalds authored
      Pull thermal management fixes from Zhang Rui:
       "Specifics:
      
       - several fixes and cleanups on Rockchip thermal drivers.
      
       - add the missing support of RK3368 SoCs in Rockchip driver.
      
       - small fixes on of-thermal, power_allocator, rcar driver, IMX, and
         QCOM drivers, and also compilation fixes, on thermal.h, when thermal
         is not selected"
      
      * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
        imx: thermal: use CPU temperature grade info for thresholds
        thermal: fix thermal_zone_bind_cooling_device prototype
        Revert "thermal: qcom_spmi: allow compile test"
        thermal: rcar_thermal: remove redundant operation
        thermal: of-thermal: Reduce log level for message when can't fine thermal zone
        thermal: power_allocator: Use temperature reading from tz
        thermal: rockchip: Support the RK3368 SoCs in thermal driver
        thermal: rockchip: consistently use int for temperatures
        thermal: rockchip: Add the sort mode for adc value increment or decrement
        thermal: rockchip: improve the conversion function
        thermal: rockchip: trivial: fix typo in commit
        thermal: rockchip: better to compatible the driver for different SoCs
        dt-bindings: rockchip-thermal: Support the RK3368 SoCs compatible
      75a29ec1
    • David Disseldorp's avatar
      target/stat: print full t10_wwn.model buffer · 8f903539
      David Disseldorp authored
      Cut 'n paste error saw it only process sizeof(t10_wwn.vendor) characters.
      Signed-off-by: default avatarDavid Disseldorp <ddiss@suse.de>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      8f903539
    • Jan Engelhardt's avatar
      target: fix COMPARE_AND_WRITE non zero SGL offset data corruption · d94e5a61
      Jan Engelhardt authored
      target_core_sbc's compare_and_write functionality suffers from taking
      data at the wrong memory location when writing a CAW request to disk
      when a SGL offset is non-zero.
      
      This can happen with loopback and vhost-scsi fabric drivers when
      SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is used to map existing user-space
      SGL memory into COMPARE_AND_WRITE READ/WRITE payload buffers.
      
      Given the following sample LIO subtopology,
      
      % targetcli ls /loopback/
      o- loopback ................................. [1 Target]
        o- naa.6001405ebb8df14a ....... [naa.60014059143ed2b3]
          o- luns ................................... [2 LUNs]
            o- lun0 ................ [iblock/ram0 (/dev/ram0)]
            o- lun1 ................ [iblock/ram1 (/dev/ram1)]
      % lsscsi -g
      [3:0:1:0]    disk    LIO-ORG  IBLOCK           4.0   /dev/sdc   /dev/sg3
      [3:0:1:1]    disk    LIO-ORG  IBLOCK           4.0   /dev/sdd   /dev/sg4
      
      the following bug can be observed in Linux 4.3 and 4.4~rc1:
      
      % perl -e 'print chr$_ for 0..255,reverse 0..255' >rand
      % perl -e 'print "\0" x 512' >zero
      % cat rand >/dev/sdd
      % sg_compare_and_write -i rand -D zero --lba 0 /dev/sdd
      % sg_compare_and_write -i zero -D rand --lba 0 /dev/sdd
      Miscompare reported
      % hexdump -Cn 512 /dev/sdd
      00000000  0f 0e 0d 0c 0b 0a 09 08  07 06 05 04 03 02 01 00
      00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
      *
      00000200
      
      Rather than writing all-zeroes as instructed with the -D file, it
      corrupts the data in the sector by splicing some of the original
      bytes in. The page of the first entry of cmd->t_data_sg includes the
      CDB, and sg->offset is set to a position past the CDB. I presume that
      sg->offset is also the right choice to use for subsequent sglist
      members.
      Signed-off-by: default avatarJan Engelhardt <jengelh@netitwork.de>
      Tested-by: default avatarDouglas Gilbert <dgilbert@interlog.com>
      Cc: <stable@vger.kernel.org> # v3.12+
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      d94e5a61
    • Himanshu Madhani's avatar
      qla2xxx: Fix regression introduced by target configFS changes · 3786dc45
      Himanshu Madhani authored
      this patch fixes following regression
      
       # targetcli
       [Errno 13] Permission denied: '/sys/kernel/config/target/qla2xxx/21:00:00:0e:1e:08:c7:20/tpgt_1/enable'
      
      Fixes: 2eafd729 ("target: use per-attribute show and store methods")
      Signed-off-by: default avatarHimanshu Madhani <himanshu.madhani@qlogic.com>
      Signed-off-by: default avatarGiridhar Malavali <giridhar.malavali@qlogic.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      3786dc45
    • Bart Van Assche's avatar
      kref: Remove kref_put_spinlock_irqsave() · 3a66d7dc
      Bart Van Assche authored
      The last user is gone. Hence remove this function.
      Signed-off-by: default avatarBart Van Assche <bart.vanassche@sandisk.com>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Joern Engel <joern@logfs.org>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      3a66d7dc
    • Bart Van Assche's avatar
      target: Invoke release_cmd() callback without holding a spinlock · 9ff9d15e
      Bart Van Assche authored
      This patch fixes the following kernel warning because it avoids that
      IRQs are disabled while ft_release_cmd() is invoked (fc_seq_set_resp()
      invokes spin_unlock_bh()):
      
      WARNING: CPU: 3 PID: 117 at kernel/softirq.c:150 __local_bh_enable_ip+0xaa/0x110()
      Call Trace:
       [<ffffffff814f71eb>] dump_stack+0x4f/0x7b
       [<ffffffff8105e56a>] warn_slowpath_common+0x8a/0xc0
       [<ffffffff8105e65a>] warn_slowpath_null+0x1a/0x20
       [<ffffffff81062b2a>] __local_bh_enable_ip+0xaa/0x110
       [<ffffffff814ff229>] _raw_spin_unlock_bh+0x39/0x40
       [<ffffffffa03a7f94>] fc_seq_set_resp+0xe4/0x100 [libfc]
       [<ffffffffa02e604a>] ft_free_cmd+0x4a/0x90 [tcm_fc]
       [<ffffffffa02e6972>] ft_release_cmd+0x12/0x20 [tcm_fc]
       [<ffffffffa042bd66>] target_release_cmd_kref+0x56/0x90 [target_core_mod]
       [<ffffffffa042caf0>] target_put_sess_cmd+0xc0/0x110 [target_core_mod]
       [<ffffffffa042cb81>] transport_release_cmd+0x41/0x70 [target_core_mod]
       [<ffffffffa042d975>] transport_generic_free_cmd+0x35/0x420 [target_core_mod]
      Signed-off-by: default avatarBart Van Assche <bart.vanassche@sandisk.com>
      Acked-by: default avatarJoern Engel <joern@logfs.org>
      Reviewed-by: default avatarAndy Grover <agrover@redhat.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Hannes Reinecke <hare@suse.de>
      Cc: Sagi Grimberg <sagig@mellanox.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      9ff9d15e
    • Nicholas Bellinger's avatar
      target: Fix race for SCF_COMPARE_AND_WRITE_POST checking · 057085e5
      Nicholas Bellinger authored
      This patch addresses a race + use after free where the first
      stage of COMPARE_AND_WRITE in compare_and_write_callback()
      is rescheduled after the backend sends the secondary WRITE,
      resulting in second stage compare_and_write_post() callback
      completing in target_complete_ok_work() before the first
      can return.
      
      Because current code depends on checking se_cmd->se_cmd_flags
      after return from se_cmd->transport_complete_callback(),
      this results in first stage having SCF_COMPARE_AND_WRITE_POST
      set, which incorrectly falls through into second stage CAW
      processing code, eventually triggering a NULL pointer
      dereference due to use after free.
      
      To address this bug, pass in a new *post_ret parameter into
      se_cmd->transport_complete_callback(), and depend upon this
      value instead of ->se_cmd_flags to determine when to return
      or fall through into ->queue_status() code for CAW.
      
      Cc: Sagi Grimberg <sagig@mellanox.com>
      Cc: <stable@vger.kernel.org> # v3.12+
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      057085e5
    • Nicholas Bellinger's avatar
      iscsi-target: Fix rx_login_comp hang after login failure · ca82c2bd
      Nicholas Bellinger authored
      This patch addresses a case where iscsi_target_do_tx_login_io()
      fails sending the last login response PDU, after the RX/TX
      threads have already been started.
      
      The case centers around iscsi_target_rx_thread() not invoking
      allow_signal(SIGINT) before the send_sig(SIGINT, ...) occurs
      from the failure path, resulting in RX thread hanging
      indefinately on iscsi_conn->rx_login_comp.
      
      Note this bug is a regression introduced by:
      
        commit e5419865
        Author: Nicholas Bellinger <nab@linux-iscsi.org>
        Date:   Wed Jul 22 23:14:19 2015 -0700
      
            iscsi-target: Fix iscsit_start_kthreads failure OOPs
      
      To address this bug, complete ->rx_login_complete for good
      measure in the failure path, and immediately return from
      RX thread context if connection state did not actually reach
      full feature phase (TARG_CONN_STATE_LOGGED_IN).
      
      Cc: Sagi Grimberg <sagig@mellanox.com>
      Cc: <stable@vger.kernel.org> # v3.10+
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      ca82c2bd
    • Luis de Bethencourt's avatar
      iscsi-target: return -ENOMEM instead of -1 in case of failed kmalloc() · 82a819e8
      Luis de Bethencourt authored
      Smatch complains about returning hard coded error codes, silence this
      warning.
      
      drivers/target/iscsi/iscsi_target_parameters.c:211
         iscsi_create_default_params() warn: returning -1 instead of -ENOMEM is sloppy
      Signed-off-by: default avatarLuis de Bethencourt <luisbg@osg.samsung.com>
      Reviewed-by: default avatarSagi Grimberg <sagig@mellanox.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      82a819e8
    • Andy Grover's avatar
      target/user: Do not set unused fields in tcmu_ops · 6ba4bd29
      Andy Grover authored
      TCMU sets TRANSPORT_FLAG_PASSTHROUGH, so INQUIRY commands will not be
      emulated by LIO but passed up to userspace. Therefore TCMU should not
      set these, just like pscsi doesn't.
      Signed-off-by: default avatarAndy Grover <agrover@redhat.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      6ba4bd29
    • Andy Grover's avatar
      target/user: Fix time calc in expired cmd processing · 611e2267
      Andy Grover authored
      Reversed arguments meant that we were doing nothing for cmds whose deadline
      had passed.
      Signed-off-by: default avatarAndy Grover <agrover@redhat.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      611e2267
  3. 28 Nov, 2015 3 commits
    • Arnd Bergmann's avatar
      ARM: 8454/1: OF implies OF_FLATTREE · aa7d5f18
      Arnd Bergmann authored
      On the ARM architecture, individual platforms select CONFIG_USE_OF if they
      need it, but all device tree code is keyed off CONFIG_OF. When building
      a platform without DT support and manually enabling CONFIG_OF, we now
      get a number of build errors, e.g.
      
      arch/arm/kernel/devtree.c: In function 'setup_machine_fdt':
      arch/arm/kernel/devtree.c:215:19: error: implicit declaration of function 'early_init_dt_verify' [-Werror=implicit-function-declaration]
      
      We could now try to separate the use case of booting from DT vs. the
      case of using the dynamic implementation, but that seems more complicated
      than it can gain us.
      
      This simply changes the ARM Kconfig file to always enable OF_RESERVED_MEM
      and OF_EARLY_FLATTREE when CONFIG_OF is enabled. These options add a little
      extra code when we just want the dynamic OF implementation, but that seems
      like a rather obscure case, and this version solves all CONFIG_OF related
      randconfig regressions.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Fixes: 0166dc11 ("of: make CONFIG_OF user selectable")
      Acked-by: default avatarRob Herring <robh@kernel.org>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      aa7d5f18
    • Linus Torvalds's avatar
      Merge tag 'pci-v4.4-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci · 081f3698
      Linus Torvalds authored
      Pull PCI fixes from Bjorn Helgaas:
       "Here are a few fixes I'd like to have in v4.4: a generic one for sysfs
        and three for HiSilicon and DesignWare host controllers.
      
        Summary:
      
        NUMA:
         - Prevent out of bounds access in numa_node override (Mathias Krause)
      
        HiSilicon host bridge driver:
         - Fix deferred probing (Arnd Bergmann)
      
        Synopsys DesignWare host bridge driver:
         - Remove incorrect io_base assignment (Stanimir Varbanov)
         - Move align_resource function pointer to pci_host_bridge structure
           (Gabriele Paoloni)"
      
      * tag 'pci-v4.4-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
        ARM/PCI: Move align_resource function pointer to pci_host_bridge structure
        PCI: hisi: Fix deferred probing
        PCI: designware: Remove incorrect io_base assignment
        PCI: Prevent out of bounds access in numa_node override
      081f3698
    • Linus Torvalds's avatar
      Merge tag 'nfs-for-4.4-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · 8003a573
      Linus Torvalds authored
      Pull NFS client bugfixes from Trond Myklebust:
       "Highlights include:
      
        Stable patches:
         - Fix a NFSv4 callback identifier leak that was also causing client
           crashes
         - Fix NFSv4 callback decoding issues when incoming requests are
           truncated
         - Don't declare the attribute cache valid when we call
           nfs_update_inode with an empty attribute structure.
         - Resend LAYOUTGET when there is a race that changes the seqid
      
        Bugfixes:
         - Fix a number of issues with the NFSv4.2 CLONE ioctl()
         - Properly set NFS v4.2 NFSDBG_FACILITY
         - NFSv4 referrals are broken; Cleanup FATTR4_WORD0_FS_LOCATIONS after
           decoding success
         - Use sliding delay when LAYOUTGET gets NFS4ERR_DELAY
         - Ensure that attrcache is revalidated after a SETATTR"
      
      * tag 'nfs-for-4.4-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
        nfs4: resend LAYOUTGET when there is a race that changes the seqid
        nfs: if we have no valid attrs, then don't declare the attribute cache valid
        nfs: ensure that attrcache is revalidated after a SETATTR
        nfs4: limit callback decoding to received bytes
        nfs4: start callback_ident at idr 1
        nfs: use sliding delay when LAYOUTGET gets NFS4ERR_DELAY
        NFS4: Cleanup FATTR4_WORD0_FS_LOCATIONS after decoding success
        NFS: Properly set NFS v4.2 NFSDBG_FACILITY
        nfs: reduce the amount of ifdefs for v4.2 in nfs4file.c
        nfs: use btrfs ioctl defintions for clone
        nfs: allow intra-file CLONE
        nfs: offer native ioctls even if CONFIG_COMPAT is set
        nfs: pass on count for CLONE operations
      8003a573
  4. 27 Nov, 2015 1 commit
    • Linus Torvalds's avatar
      Merge git://www.linux-watchdog.org/linux-watchdog · d0bc387d
      Linus Torvalds authored
      Pull watchdog fixes from Wim Van Sebroeck:
       - a null pointer dereference fix for omap_wdt
       - some clock related fixes for pnx4008
       - an underflow fix in wdt_set_timeout() for w83977f_wdt
       - restart fix for tegra wdt
       - Kconfig change to support Freescale Layerscape platforms
       - fix for stopping the mtk_wdt watchdog
      
      * git://www.linux-watchdog.org/linux-watchdog:
        watchdog: mtk_wdt: Use MODE_KEY when stopping the watchdog
        watchdog: Add support for Freescale Layerscape platforms
        watchdog: tegra: Stop watchdog first if restarting
        watchdog: w83977f_wdt: underflow in wdt_set_timeout()
        watchdog: pnx4008: make global wdt_clk static
        watchdog: pnx4008: fix warnings caused by enabling unprepared clock
        watchdog: omap_wdt: fix null pointer dereference
      d0bc387d