Patch from Ian Campbell

Please ignore previous patch: set_irq_type takes the IRQ number and
not the GPIO number so using any variant on IRQ_TO_GPIO* is incorrect
anyway.
Signed-of-by: Ian Campbell <icampbell@arcom.com>

Patch from Nicolas Pitre

- Don't chain assignment to volatile registers.
  Doing otherwise generates extra needless code to reload the value
  for the next assignment.

- Don't touch PXA27x registers on a PXA25x build.
  (spotted by Ian Campbell)

Signed-off-by: Nicolas Pitre 

 CONFIG_ARCH_IOP3XX

Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre 

Add create_proc_ide_interfaces() call to sgiioc4_ide_setup_pci_device()
so /proc/ide gets populated properly.
Signed-off-by: Erik Jacobson <erikj@sgi.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

I want to change my vote :-) The problem isn't a spurious extra "#else"
(which Paul's patch removed) ...  it is a missing "#endif"

Here's a patch that puts the #else back, adds the #endif, and fixes the
whitespace to make this nested mess of pre-processor noise a bit more
legible. 
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: David S. Miller <davem@davemloft.net>

Noticed by Ulrich Drepper
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch brings the IP ECN handling up-to-date with repsect to
RFC 3168.  Mostly this means treating ECT(1) in the same way as
ECT(0).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

New version of the NETIF_F_LLTX for network devices patch. 

This allows network drivers to set the NETIF_F_LLTX flag
and then do their own locking in start_queue_xmit. 
This lowers locking overhead in this critical path. 

The drivers can use try lock if they want and return -1
when the lock wasn't grabbed. In this case the packet
will be requeued. For better compatibility this is only
done for drivers with LLTX set, others don't give a special
meaning to -1.

Most of the modern drivers who have a lock around hard_start_xmit
can just set this flag. It may be a good idea to convert the spin
lock there to a try lock. The only thing that should be audited
is that they do enough locking in the set_multicast_list function
too, and not also rely on xmit_lock here.

Now doesn't move any code around and does things with gotos instead.

The loop printk is also still there even for NETIF_F_LLTX

For drivers that don't set the new flag nothing changes.
Signed-off-by: David S. Miller <davem@davemloft.net>

Here's the optimization: if we know the remaining data exceeds the
mtu, we do not need to fill up full of it.

skb_prev:
                mtu
+----------+--+-+
|          |  | |
+----------+--+-+
           ^  ^
skb_prev->len |
              maxfraglen

appending data:
           +--------+
           |        |
           +--------+
           --------->
                  length

In this case, we know we need more fragment(s).
So, let's fill up to maxfraglen (instead of mtu) 
to avoid needless copy in the next loop.
Signed-off-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Bart De Schuymer <bdschuym@pandora.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

into nuts.davemloft.net:/disk1/BK/net-2.6

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

udf_filead_read() and udf_get_fileextent() are unused.
Here they are put inside #if 0 .. #endif
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Alpha is AXP.
hostname and domainname does not need redirection.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The exports were for reiserfs in 2.4, but reiserfs doesn't need them
anymore.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Doesn't even appear in Makefile and Kconfig anymore.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Current gcc 3.5 doesn't compile a x86-64 kernel, because it doesn't
recognize the offsetof used in asm-offset.c to be constant.

Use __builtin_offsetof for this instead.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

the ibm_emac_mal.c one is in exported function, so useless, the other
two are stale decrements.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Correct the failure path in start_io_thread(), to return the correct error
code.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Avoid forcing use of the no-op scheduler for UBD; this may uncover some
bugs in the UBD driver, and in fact uml-ubd-no-empty-queue.patch is needed
to make this sure.  But as of now, no other bugs have been discovered, so
this should be safe.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Avoid using, in the UBD driver, the elv_queue_empty function.  It's for the
block layer only; in fact, the Anticipatory Scheduler can return NULL with
elv_next_request() even if the queue is not empty, because it waits for the
process to send another request before seeking on the disk.

In fact, if (with uml-ubd-any-elevator) we let UBD use any scheduler,
elevator=as will make the UBD driver Oops, if we don't have this patch.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The routine afs_rxvl_probe() is unused and could be removed.  (I only put
#if 0 around it.)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Clean up the TSC-synchronization code: get rid of div64 and calm down the
printks.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Uses msecs_to_jiffies() instead of the custom jiffies_from_ms().
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/cdrom/cdu31a.c: In function `do_sony_cd_cmd':
drivers/cdrom/cdu31a.c:962: parse error before `:'
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>