- 13 Jan, 2023 13 commits
-
-
Wenjing Liu authored
[why] 1. Move dd_link_ddc functions to link_ddc. 2. Move link ddc functions declaration exposed in dc to link.h 3. Move link ddc functions declaration exposed in dm to dc_link.h 4. Remove i2caux_interface.h file Tested-by:
Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Wenjing Liu <wenjing.liu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Wenjing Liu authored
[why] Factor out hpd handling logic from generic dc link file. Tested-by:
-
Dillon Varone authored
[WHY?] FIFO enable sequence is incomplete as it is currently implemented in FW, and requires reset to prevent the FIFO to be enabled in an invalid state. This cannot be done until DIG FE is connected to the BE. [HOW?] Add FIFO enable sequence in driver for dcn32 with reset after DIG FE is connected to BE. Tested-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
Dillon Varone <Dillon.Varone@amd.com> Signed-off-by:
-
Cruise Hung authored
[Why] The DPIA link encoder (DIG) was not released when a Display XDR 6K monitor was disconnected. That's because the DPIA link encoder logic checked the BW when it removed the link encoder for it. And the timing BW was less than DP link BW. So, it failed to release the link encoder. And that caused the DIG was occupied and can't be used. The reason it checked the BW is it wants to identify whether this link was using DIG or HPO. It skips if it's not DIG. [How] Not to check the BW when it removes the link encoder because it's already in the assignment table, it must be the DIG. Tested-by:
Cruise Hung <Cruise.Hung@amd.com> Signed-off-by:
-
Dmytro Laktyushkin authored
A previous fix attempted to correct mismatch between DM display targets and dc panel instancing by only counting connected panels. This behaviour breaks a feature, thus this is an alternative solution that allows mapping display targets to dc links during mod_power_create. Tested-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by:
-
Martin Leung authored
This reverts commit 1b5d0e7e. It caused corruption in some media players. Tested-by:
Aric Cyr <Aric.Cyr@amd.com> Reviewed-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by:
Martin Leung <Martin.Leung@amd.com> Signed-off-by:
-
Mustapha Ghaddar authored
[WHY] After introducing new DPIA NOTIFICATION we will need to update the exiting BW allocation logic [HOW] Updated the BW alloc source and header files Tested-by:
Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Acked-by:
Mustapha Ghaddar <mghaddar@amd.com> Signed-off-by:
-
Konstantin Meskhidze authored
This commit fixes memory leakage in dc_construct_ctx() function. Signed-off-by:
Konstantin Meskhidze <konstantin.meskhidze@huawei.com> Signed-off-by:
-
Deepak R Varma authored
A logical evaluation already results in bool. There is no need for using a ternary operator based evaluation and bool conversion of the outcome. Issue identified using boolconv.cocci Coccinelle semantic patch. This was also reported by the Kernel Test Robot. Hence Fixes: 473683a0 ("drm/amd/display: Create a file dedicated for CRTC") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Deepak R Varma <drv@mailo.com> Signed-off-by:
-
Jiapeng Chong authored
The assignment of the else and if branches is the same, so the if else here is redundant, so we remove it. ./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1951:2-4: WARNING: possible condition with no effect (if == else). Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3719Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Mario Limonciello authored
On DCN314 when resuming from s0i3 an ASSERT is shown indicating that `VBIOSSMC_MSG_SetHardMinDcfclkByFreq` returned `VBIOSSMC_Result_Failed`. This isn't a driver bug; it's a BIOS/configuration bug. To make this easier to triage, add an explicit warning when this issue happens. This matches the behavior utilized for failures with `VBIOSSMC_MSG_TransferTableDram2Smu` configuration. Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
hongao authored
[Why] Setting scaling does not correctly update CRTC state. As a result dc stream state's src (composition area) && dest (addressable area) was not calculated as expected. This causes set scaling doesn's work. [How] Correctly update CRTC state when setting scaling property. Reviewed-by:
hongao <hongao@uniontech.com> Signed-off-by:
-
Hamza Mahfooz authored
It is possible that adev->dm.dc->caps.max_links is greater than AMDGPU_MAX_CRTCS. So, to not potentially access unallocated memory use adev->mode_info.num_crtc to do the bounds check instead of adev->dm.dc->caps.max_links. Fixes: 1b11ff76 ("drm/amd/display: Implement multiple secure display") Fixes: b8ff7e08 ("drm/amd/display: Fix when disabling secure_display") Reviewed-by:
Alan Liu <HaoPing.Liu@amd.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
- 11 Jan, 2023 2 commits
-
-
Philip Yang authored
Use page aligned size to reserve memory usage because page aligned TTM BO size is used to unreserve memory usage, otherwise no page aligned size causes memory usage accounting unbalanced. Change vram_used definition type to int64_t to be able to trigger WARN_ONCE(adev && adev->kfd.vram_used < 0, "..."), to help debug the accounting issue with warning and backtrace. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Philip Yang authored
If acquire_vm failed when initializing KFD vm, set vm->process_info to NULL and free process info, otherwise, the future acquire_vm will always fail as vm->process_info is not NULL. Pass avm as parameter to remove the duplicate code. Signed-off-by:
-
- 10 Jan, 2023 25 commits
-
-
Eric Huang authored
The point bo->kfd_bo is NULL for queue's write pointer BO when creating queue on mGPU. To avoid using the pointer fixes the error. Signed-off-by:
Eric Huang <jinhuieric.huang@amd.com> Reviewed-by:
-
Deepak R Varma authored
kfree() & vfree() internally performs NULL check on the pointer handed to it and take no action if it indeed is NULL. Hence there is no need for a pre-check of the memory pointer before handing it to kfree()/vfree(). Issue reported by ifnullfree.cocci Coccinelle semantic patch script. Reviewed-by:
-
Guchun Chen authored
This leverages the logic in smu11. No need to talk to SMU to check BACO enablement as it's in BACO state already. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Eric Huang authored
There will be data corruption on vram allocated by svm if the initialization is not complete and application is writting on the memory. Adding sync to wait for the initialization completion is to resolve this issue. Signed-off-by:
-
Deepak R Varma authored
Use the resource_size() function instead of a open coded computation resource size. It makes the code more readable. Issue identified using resource_size.cocci coccinelle semantic patch. Signed-off-by:
-
YiPeng Chai authored
Fixed bug on error when unloading amdgpu. The error message is as follows: [ 377.706202] kernel BUG at drivers/gpu/drm/drm_buddy.c:278! [ 377.706215] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 377.706222] CPU: 4 PID: 8610 Comm: modprobe Tainted: G IOE 6.0.0-thomas #1 [ 377.706231] Hardware name: ASUS System Product Name/PRIME Z390-A, BIOS 2004 11/02/2021 [ 377.706238] RIP: 0010:drm_buddy_free_block+0x26/0x30 [drm_buddy] [ 377.706264] Code: 00 00 00 90 0f 1f 44 00 00 48 8b 0e 89 c8 25 00 0c 00 00 3d 00 04 00 00 75 10 48 8b 47 18 48 d3 e0 48 01 47 28 e9 fa fe ff ff <0f> 0b 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 55 48 89 f5 53 [ 377.706282] RSP: 0018:ffffad2dc4683cb8 EFLAGS: 00010287 [ 377.706289] RAX: 0000000000000000 RBX: ffff8b1743bd5138 RCX: 0000000000000000 [ 377.706297] RDX: ffff8b1743bd5160 RSI: ffff8b1743bd5c78 RDI: ffff8b16d1b25f70 [ 377.706304] RBP: ffff8b1743bd59e0 R08: 0000000000000001 R09: 0000000000000001 [ 377.706311] R10: ffff8b16c8572400 R11: ffffad2dc4683cf0 R12: ffff8b16d1b25f70 [ 377.706318] R13: ffff8b16d1b25fd0 R14: ffff8b1743bd59c0 R15: ffff8b16d1b25f70 [ 377.706325] FS: 00007fec56c72c40(0000) GS:ffff8b1836500000(0000) knlGS:0000000000000000 [ 377.706334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 377.706340] CR2: 00007f9b88c1ba50 CR3: 0000000110450004 CR4: 00000000003706e0 [ 377.706347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 377.706354] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 377.706361] Call Trace: [ 377.706365] <TASK> [ 377.706369] drm_buddy_free_list+0x2a/0x60 [drm_buddy] [ 377.706376] amdgpu_vram_mgr_fini+0xea/0x180 [amdgpu] [ 377.706572] amdgpu_ttm_fini+0x12e/0x1a0 [amdgpu] [ 377.706650] amdgpu_bo_fini+0x22/0x90 [amdgpu] [ 377.706727] gmc_v11_0_sw_fini+0x26/0x30 [amdgpu] [ 377.706821] amdgpu_device_fini_sw+0xa1/0x3c0 [amdgpu] [ 377.706897] amdgpu_driver_release_kms+0x12/0x30 [amdgpu] [ 377.706975] drm_dev_release+0x20/0x40 [drm] [ 377.707006] release_nodes+0x35/0xb0 [ 377.707014] devres_release_all+0x8b/0xc0 [ 377.707020] device_unbind_cleanup+0xe/0x70 [ 377.707027] device_release_driver_internal+0xee/0x160 [ 377.707033] driver_detach+0x44/0x90 [ 377.707039] bus_remove_driver+0x55/0xe0 [ 377.707045] pci_unregister_driver+0x3b/0x90 [ 377.707052] amdgpu_exit+0x11/0x6c [amdgpu] [ 377.707194] __x64_sys_delete_module+0x142/0x2b0 [ 377.707201] ? fpregs_assert_state_consistent+0x22/0x50 [ 377.707208] ? exit_to_user_mode_prepare+0x3e/0x190 [ 377.707215] do_syscall_64+0x38/0x90 [ 377.707221] entry_SYSCALL_64_after_hwframe+0x63/0xcd Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Mario Limonciello authored
No consumers outside of amdgpu_ucode.c use amdgpu_ucode_validate anymore, so make the function static. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_release` helper is replacing all calls to release_firmware. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_release` helper is replacing all calls to release_firmware. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper is for symmetry on unloading. Reviewed-by:
-
Mario Limonciello authored
Now that IP version decoding is used, a number of case statements can be combined. Reviewed-by:
-
Mario Limonciello authored
This will ensure that the microcode is available before the firmware framebuffer has been destroyed. Reviewed-by:
-
