- 20 Sep, 2021 9 commits
-
-
Sameer Pujar authored
The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Sameer Pujar authored
The Audio Multiplexer (AMX) block can multiplex up to four input streams each of which can have maximum 16 channels and generate an output stream with maximum 16 channels. A byte RAM helps to form an output frame by any combination of bytes from the input frames. This patch registers AMX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes AMX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-amx" for Tegra210 and Tegra186. For Tegra194 and later, "nvidia,tegra194-amx" can be used. Signed-off-by:
-
Sameer Pujar authored
The Sampling Frequency Converter (SFC) converts the sampling frequency of the input signal from one frequency to another. It supports sampling frequency conversions of streams of up to two channels (stereo). This patch registers SFC driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes SFC interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-sfc" compatible binding. Signed-off-by:
-
Sameer Pujar authored
The Master Volume Control (MVC) provides gain or attenuation to a digital signal path. It can be used in input or output signal path for per-stream volume control or it can be used as master volume control. The MVC block has one input and one output. The input digital stream can be mono or multi-channel (up to 7.1 channels) stream. An independent mute control is also included in the MVC block. This patch registers MVC driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes MVC interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-mvc" compatible binding. Signed-off-by:
-
Sameer Pujar authored
Add routing support for following modules of AHUB: * SFC (Sampling Frequency Converter) * MVC (Master Volume Control) * AMX (Audio Multiplexer) * ADX (Audio Demultiplexer) * Mixer These modules can be plugged into audio path as per the need using routing controls similar to the already existing routes to I/O modules such as I2S, DMIC and DSPK. Signed-off-by:
-
Sameer Pujar authored
This patch adds YAML schema for DT bindings of few AHUB modules. These devices will be registered as ASoC components and bindings will be used on Tegra210 and later chips. The bindings for below mentioned modules are added: * SFC (Sampling Frequency Converter) * MVC (Master Volume Control) * AMX (Audio Multiplexer) * ADX (Audio Demultiplexer) * Mixer Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1631551342-25469-5-git-send-email-spujar@nvidia.comSigned-off-by:
-
Sameer Pujar authored
When multiple components are connected back to back in an audio path, hw_param fixup may be required for CPU or Codec endpoint of BE<->BE DAI links. Currently fixup support is available for Codec and this commit adds similar feature for CPU endpoint of a BE<->BE link. For example a resampler component can be plugged into an audio path. [ FE -> BE1 -> ... -> resampler -> ... BEn ] The resampler DAI links can be: BEx (CPU) -> resampler input (Codec) resampler output (CPU) -> BEy (Codec) Thus input and output sample rate parameters for resampler can be fixed up as per the resample requirement. Signed-off-by:
-
Sameer Pujar authored
The current limit of 128 is not sufficient when more components are added to the audio map on Tegra210 and later platforms. Thus it is resulting in probe failure. The requirement is of nearly ~200 DAI links. To give sufficient room for future additions the maximum limit is increased to 512 DAI links. This is a preparatory patch to add more components like resampler, mixer, multiplexers, demultiplexers and volume controllers to Tegra210 and later platforms. Signed-off-by:
-
Sameer Pujar authored
In some cases, multiple FE components have the same BE component in their respective DPCM paths. One such example would be a mixer component, which can receive two or more inputs and sends a mixed output. In such cases, to avoid reconfiguration of already active DAI (mixer output DAI in this case), check the BE stream state to filter out the redundancy. In summary, allow connection of BE if the respective current stream state is either NEW or CLOSED. Signed-off-by:
-
- 17 Sep, 2021 6 commits
-
-
Mark Brown authored
Merge series "ASoC: SOF: ipc: Small cleanups for message handler functions" from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: Hi, Rename the parameter for ipc_trace_message() to match it's content and use %#x" for hexadecimal prints in remaining places. Regards, Peter --- Peter Ujfalusi (2): ASoC: SOF: ipc: Clarify the parameter name for ipc_trace_message() ASoC: SOF: ipc: Print 0x prefix for errors in ipc_trace/stream_message() sound/soc/sof/ipc.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) -- 2.33.0 -
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the 88pm860x driver to use more modern terminology for clocking. Signed-off-by:
-
Peter Ujfalusi authored
From the name sof_arch_ops one can not decipher that these ops are DSP architecture ops. Rename it to dsp_arch_ops and change also the macro to retrieve the DSP architecture specific ops as well. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210916130308.7969-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Peter Ujfalusi authored
If the snd_sof_dsp_send_msg() failed then we have already returned from sof_ipc_tx_message_unlocked() with the error message. There is no need to check if ret is really 0 after this and we can return directly the return value from tx_wait_done() At the same time make the remaining checks for error (ret) to match. Signed-off-by:
-
Peter Ujfalusi authored
The dev_err() in ipc_trace_message() and ipc_stream_message() is missing the 0x prefix for the hexadecimal number when printed. Signed-off-by:
-
Peter Ujfalusi authored
ipc_trace_message() receives the type not the ID. Use the same naming as the ipc_stream_message() function: msg_type to help the reader to follow the code. Signed-off-by:
Bard Liao <bard.liao@intel.com> Link: https://lore.kernel.org/r/20210917085823.27222-2-peter.ujfalusi@linux.intel.comSigned-off-by:
-
- 16 Sep, 2021 16 commits
-
-
Mark Brown authored
Merge series "ASoC: cs42l42: Implement Manual Type detection as fallback" from Vitaly Rodionov <vitalyr@opensource.cirrus.com>: For some headsets CS42L42 autodetect mode is not working correctly. They will be detected as unknown types or as headphones. According to the CS42L42 datasheet, if the headset autodetect failed, then the driver should switch to manual mode and perform a manual steps sequence. These steps were missing in the current driver code. This patch will add manual mode fallback steps in case autodetect failed. The default behavior is not affected, manual mode runs only when autodetect failed. Tested for regression with autodetect with all known headsets - no regression. Tested with all headsets customers reported as false detected: Gumdrop DropTech B1 - detected as headset OK HUAWEI AM115 - detected as headset OK UGREEN EP103 - detected as headset OK HONOR AM116 - detected as headset OK Stefan Binding (1): ASoC: cs42l42: Implement Manual Type detection as fallback sound/soc/codecs/cs42l42.c | 104 ++++++++++++++++++++++++++++++++----- sound/soc/codecs/cs42l42.h | 54 +++++++++++++++++++ 2 files changed, 146 insertions(+), 12 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: SOF: Clean up the probe support" from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: Hi, The probe debug feature of SOF can be used to extract streams of data from a given point of a pipeline for analysis. The support is implemented by using the ALSA/ASoC compress support for the capture stream, but the code can not be used by/for a normal compressed data stream. It is a debug feature. Merge the probe implementation in the core (compress.c/h and probe.c/h) into one file: sof-probes.c/h Rename the Intel HDA specific probe implementation from hda-compressc.c to hda-probes.c We also need to add IPC logging support for the probes messages and drop the unused references to SOF compress to have reasonably clean code. Regards, Peter --- Peter Ujfalusi (5): ASoC: SOF: ipc: Add probe message logging to ipc_log_header() ASoC: SOF: pcm: Remove non existent CONFIG_SND_SOC_SOF_COMPRESS reference ASoC: SOF: probe: Merge and clean up the probe and compress files ASoC: SOF: Intel: Rename hda-compress.c to hda-probes.c ASoC: SOF: sof-probes: Correct the function names used for snd_soc_cdai_ops Ranjani Sridharan (1): ASoC: SOF: compress: move and export sof_probe_compr_ops sound/soc/sof/Makefile | 3 +- sound/soc/sof/compress.c | 147 --------- sound/soc/sof/compress.h | 32 -- sound/soc/sof/core.c | 2 +- sound/soc/sof/debug.c | 2 +- sound/soc/sof/intel/Makefile | 2 +- sound/soc/sof/intel/hda-dai.c | 16 +- .../intel/{hda-compress.c => hda-probes.c} | 0 sound/soc/sof/ipc.c | 23 ++ sound/soc/sof/pcm.c | 6 +- sound/soc/sof/probe.h | 85 ------ sound/soc/sof/sof-priv.h | 5 - sound/soc/sof/{probe.c => sof-probes.c} | 280 +++++++++++------- sound/soc/sof/sof-probes.h | 38 +++ 14 files changed, 248 insertions(+), 393 deletions(-) delete mode 100644 sound/soc/sof/compress.c delete mode 100644 sound/soc/sof/compress.h rename sound/soc/sof/intel/{hda-compress.c => hda-probes.c} (100%) delete mode 100644 sound/soc/sof/probe.h rename sound/soc/sof/{probe.c => sof-probes.c} (52%) create mode 100644 sound/soc/sof/sof-probes.h -- 2.33.0 -
Mark Brown authored
As part of retiring the old macros defining the DAI clocking mode in the DAI format update the au1x drivers to use the new style macros. Signed-off-by: -
Mark Brown authored
Convert the Atmel drivers to use the new style defines for clocking in DAI formats. Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by:
Peter Rosin <peda@axentia.se>
-
David Rhodes authored
Fix warnings and errors in DT bindings Add newline at end of file Replace 'unevaluatedProperties' with 'additionalProperties' Add spi context to DT example Add #sound-dai-cells to DT example Rename to 'cirrus,cs35l41.yaml' Signed-off-by:
David Rhodes <drhodes@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210915191422.2371623-1-drhodes@opensource.cirrus.comSigned-off-by:
-
Charles Keepax authored
Remove pdn variable that was made redundant in an earlier patch. Fixes: c2f14cc2 ("ASoC: cs35l41: Fix use of an uninitialised variable") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210916082346.12001-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
Viorel Suman authored
Add SAI1 instance to imx8m_dai array. Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Reviewed-by:
Paul Olaru <paul.olaru@oss.nxp.com> Reviewed-by:
-
Vitaly Rodionov authored
Signed-off-by:
Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210916110932.10293-1-vitalyr@opensource.cirrus.comSigned-off-by:
-
Peter Ujfalusi authored
Relocate the INIT_WORK() at the same place where we schedule the work to make the code simpler and easier to follow. Signed-off-by:
-
Stefan Binding authored
Some headsets are not detected correctly by Automatic Type Detection on cs42l42. Instead, Manual Type Detection can be used to give a more accurate value. Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by:
-
Peter Ujfalusi authored
The snd_soc_cdai_ops have startup and shutdown callbacks defined unlike the component callbacks where open and free is used. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210916103211.1573-7-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Peter Ujfalusi authored
The hda-compress.c is implementing the SOF probe support for intel HDA platforms using compress API. To avoid the confusion, rename it to reflect this. Signed-off-by:
-
Peter Ujfalusi authored
The probe debug functionality is implemented via compress support and it was spread across two set of files: probe.c/h compress.c/h Merge the two files into sof-probes.s/h and clean them up by removing unused struct definitions, functions. We can also move most of the functions static as they are only used internally. Signed-off-by:
-
Ranjani Sridharan authored
sof_probe_compr_ops are not platform-specific. So move it to common compress code and export the symbol. The compilation of the common compress code is already dependent on the selection of CONFIG_SND_SOC_SOF_DEBUG_PROBES, so no need to check the Kconfig section for defining sof_probe_compr_ops again. Signed-off-by:
-
Peter Ujfalusi authored
The SND_SOC_SOF_COMPRESS is not valid Kconfig option, remove it. At the same time remove the also the declaration of the non existent sof_compressed_ops. Signed-off-by:
-
Peter Ujfalusi authored
Probe related messages are missing from the logging, for example the PROBE_INIT would show up as: ipc tx: 0xc0010000: unknown GLB command ipc tx succeeded: 0xc0010000: unknown GLB command Add code to handle the probe messages to have human readable output Signed-off-by:
-
- 15 Sep, 2021 9 commits
-
-
Peter Ujfalusi authored
The snd_sof_debugfs_io_item() only used within debug.c, no need to export it. Signed-off-by:
Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by:
-
Peter Ujfalusi authored
Do not access the sdev->bar[] directly to make the code generic, use the new generic ops for handing the regions for debugfs. Signed-off-by:
-
Peter Ujfalusi authored
Set the generic iomem callback for debugfs_add_region_item to avoid regression when the core switches to use the generic interface for the regions. Signed-off-by:
-
Peter Ujfalusi authored
Set the generic iomem callback for debugfs_add_region_item to avoid regression when the core switches to use the generic interface for the regions. Signed-off-by:
-
Peter Ujfalusi authored
Add new debugfs_add_region_item along with a generic wrapper snd_sof_debugfs_add_region_item() to abstract away the DSP regions related debugfs support. At the same commit add iomem based generic implementation for the new ops Signed-off-by:
-
Peter Ujfalusi authored
The use of bar in the core poses limits on the portability of the code to other, non iomapped platforms. To make the API more generic, remove the use of 'bar' as parameter for the block copy API. Signed-off-by:
-
Peter Ujfalusi authored
snd_sof_fw_parse_ext_data() is used only internally within loader.c and there is no need to export it. Signed-off-by:
-
Peter Ujfalusi authored
The read64 operation is not used by IMX along with other IO functions. No need to set it for the ops. Signed-off-by:
-
Peter Ujfalusi authored
The snd_sof_dsp_mailbox_init() is called only from sof_get_windows() to set the sdev->dsp_box.offset/size and sdev->host_box.offset/size Instead of using a function, set the offsets and sizes like we do for the other boxes in sof_get_windows(). Signed-off-by:
-
