- 20 May, 2020 6 commits
-
-
Mauro Carvalho Chehab authored
The time 64 API patchset changed the ts stamp to u64. Update this driver accordingly. Fixes: 15a40b27 ("media: videobuf: use u64 for the timestamp internally") Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mauro Carvalho Chehab authored
This type was renamed in the past by a more meaningul name. Change it on atomisp too. Fixes: 238e4a5b ("media: rename VFL_TYPE_GRABBER to _VIDEO") Signed-off-by:
-
Mauro Carvalho Chehab authored
Fix the usage of totalram_pages, as this is now a function. Fixes: ca79b0c2 ("mm: convert totalram_pages and totalhigh_pages variables to atomic") Signed-off-by:
-
Mauro Carvalho Chehab authored
This macro had its first parameter lost. Remove it. While on it, fix the alignments where this macro is used. Fixes: 96d4f267 ("Remove 'type' argument from access_ok() function") Signed-off-by:
-
Mauro Carvalho Chehab authored
From now on, I'll be maintaining the atomisp driver, and Sakari will be reviewing it. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
There are some interest on having this driver back, and I can probably dedicate some time to address its issue. So, let's ressurect it. For now, the driver causes a recursive error and doesn't build, so, make it depend on BROKEN. This reverts commit 51b8dc51. Signed-off-by:
-
- 18 May, 2020 34 commits
-
-
Jacopo Mondi authored
Parse device properties and register controls for them using the newly introduced helpers. Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Jacopo Mondi authored
Parse device properties and register controls for them using the newly introduced helpers. Signed-off-by:
-
Jacopo Mondi authored
Parse device properties and register controls for them using the newly introduced helpers. Signed-off-by:
-
Jacopo Mondi authored
Add an helper function to v4l2-ctrls to register controls associated with a device property. Signed-off-by:
-
Jacopo Mondi authored
Before adding a new include directive, sort the existing ones in alphabetical order. Signed-off-by:
-
Jacopo Mondi authored
Before adding a new forward declaration to the v4l2-ctrls.h header file, sort the existing ones alphabetically. Signed-off-by:
-
Jacopo Mondi authored
Add an helper function to parse common device properties in the same way as v4l2_fwnode_endpoint_parse() parses common endpoint properties. Parse the 'rotation' and 'orientation' properties from the firmware interface. Signed-off-by:
-
Jacopo Mondi authored
Add support for the newly defined V4L2_CID_CAMERA_ORIENTATION and V4L2_CID_CAMERA_SENSOR_ROTATION read-only controls used to report the camera device mounting position and orientation respectively. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Jacopo Mondi authored
Add documentation for the V4L2_CID_CAMERA_SENSOR_ROTATION camera control. The newly added read-only control reports the rotation correction to be applied to images before displaying them to the user. Signed-off-by:
-
Jacopo Mondi authored
Add documentation for the V4L2_CID_CAMERA_ORIENTATION camera control. The newly added read-only control reports the camera device orientation relative to the usage orientation of the system the camera is installed on. Signed-off-by:
-
Jacopo Mondi authored
Replace the 'rotation' property description by providing a definition relative to the camera sensor pixel array coordinate system and the captured scene. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jacopo Mondi authored
Add the 'orientation' device property, used to specify the device mounting position. The property is particularly meaningful for mobile devices with a well defined usage orientation. Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Steve Longerbeam authored
Remove the TODO items regarding media link creation, these issues are resolved by moving media link creation to individual entity bound callbacks and the implementation of the get_fwnode_pad operation. Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Steve Longerbeam authored
Convert to dev_dbg the "subdev bound" and IPU-internal media-link creation messages. Signed-off-by:
-
Steve Longerbeam authored
The entities external to the i.MX6 IPU and i.MX7 now create the links to their fwnode-endpoint connected entities in their notifier bound callbacks. Which means imx_media_create_of_links() and imx_media_create_csi_of_links() are no longer needed and are removed. However there is still one case in which imx-media needs to create fwnode-endpoint based links at probe completion. The v4l2-async framework does not allow multiple subdevice notifiers to contain a duplicate subdevice in their asd_list. Only the first subdev notifier that discovers and adds that one subdevice to its asd_list will receive a bound callback for it. Other subdevices that also have firmware endpoint connections to this duplicate subdevice will not have it in their asd_list, and thus will never receive a bound callback for it. In the case of imx-media, the one duplicate subdevice in question is the i.MX6 MIPI CSI-2 receiver. Until there is a solution to that problem, rewrite imx_media_create_links() to add the missing links from the CSI-2 receiver to the CSIs and CSI muxes. The function is renamed imx_media_create_csi2_links(). Signed-off-by:
-
Steve Longerbeam authored
Fix the 1:1 port-id:pad-index assumption for the upstream subdevice, by searching the upstream subdevice's endpoints for one that maps to the pad's index. This is carried out by a new reverse mapping function imx_media_get_pad_fwnode(). Signed-off-by:
-
Steve Longerbeam authored
For i.MX5/6, if the bound subdev is a video mux, it must be one of the CSI muxes, and for i.MX7, the bound subdev must always be a CSI mux. So if the bound subdev is a video mux, mark it as a CSI mux with a new group id IMX_MEDIA_GRP_ID_CSI_MUX. In the process use the new group id in csi_get_upstream_endpoint(), and do some cleanup in that function for better readability. Suggested-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Steve Longerbeam authored
The function imx7_csi_get_upstream_endpoint() is not necessary for imx7. First, the imx7 CSI only receives from the CSI mux, so much of the code in there is pointless. Second, it is only used to determine whether the CSI mux has selected the CSI-2 input or the parallel input. This can be accomplished much more simply by getting the function type of selected input entity to the CSI mux. Signed-off-by:
-
Steve Longerbeam authored
Implement a notifier bound op to register media links from the remote sub-device's source pad(s) to the CSI sink pad. Signed-off-by:
-
Steve Longerbeam authored
Implement a notifier bound op to register media links from the remote sub-device's source pad(s) to the CSI sink pad. Signed-off-by:
-
Steve Longerbeam authored
Implement a notifier bound op to register media links from the remote sub-device's source pad(s) to the mipi csi-2 receiver sink pad. Signed-off-by:
-
Steve Longerbeam authored
Implement a notifier bound op to register media links from the remote sub-device's source pad(s) to the mipi csi-2 receiver sink pad. Signed-off-by:
-
Steve Longerbeam authored
Implement a notifier bound op to register media links from the remote sub-device's source pad(s) to the video-mux sink pad(s). Signed-off-by:
-
Steve Longerbeam authored
Use v4l2_subdev_get_fwnode_pad_1_to_1() as the get_fwnode_pad operation. The i.MX7 CSI maps port numbers and pad indexes 1:1. Acked-by:
-
Steve Longerbeam authored
Use v4l2_subdev_get_fwnode_pad_1_to_1() as the get_fwnode_pad operation. The imx7-mipi-csis maps port numbers and pad indexes 1:1. Signed-off-by:
-
Steve Longerbeam authored
Use v4l2_subdev_get_fwnode_pad_1_to_1() as the get_fwnode_pad operation. The MIPI CSI-2 receiver maps port numbers and pad indexes 1:1. Signed-off-by:
-
Steve Longerbeam authored
Use v4l2_subdev_get_fwnode_pad_1_to_1() as the get_fwnode_pad operation. The video mux maps fwnode port numbers and pad indexes 1:1. Signed-off-by:
-
Steve Longerbeam authored
The CSI does not have a 1:1 relationship between fwnode port numbers and pad indexes. In fact the CSI fwnode device is itself a port which is the sink, containing only a single fwnode endpoint. Implement media_entity operation get_fwnode_pad to first verify the given endpoint is the CSI's sink endpoint, and if so return the CSI sink pad index. Signed-off-by:
-
Steve Longerbeam authored
media: Revert "media: v4l2-fwnode: Add a convenience function for registering subdevs with notifiers" The users of v4l2_async_register_fwnode_subdev() have switched to parsing their endpoints and setting up async sub-device lists in their notifiers locally, without using the endpoint parsing callbacks. There are no more users of v4l2_async_register_fwnode_subdev() so this convenience function can be removed. This reverts commit 1634f0ed. Signed-off-by:
-
Steve Longerbeam authored
Instead of using the convenience functions v4l2_async_notifier_parse_fwnode_endpoints*() or v4l2_async_register_fwnode_subdev(), parse the input endpoints and set up the async sub-devices without using callbacks. The drivers know which ports it must parse and how to handle unconnected remotes, so it makes the code simpler to transfer control of endpoint parsing to the driver. Signed-off-by:
-
Steve Longerbeam authored
Instead of using the convenience function v4l2_async_register_fwnode_subdev(), parse the video-mux input endpoints and set up the async sub-devices without using callbacks. The video-mux knows which ports it must parse (the input ports) and how to handle unconnected remotes, so it makes the code simpler to transfer control of endpoint parsing to the driver. Signed-off-by:
-
Steve Longerbeam authored
Add functions to create media links between source and sink subdevices, based on the fwnode endpoint connections between them: v4l2_create_fwnode_links_to_pad() - create links from a source subdev to a single sink pad based on fwnode endpoint connections. v4l2_create_fwnode_links() - create all links from a source to sink subdev based on fwnode endpoint connections. These functions can be used in a sink's v4l2-async notifier subdev bound callback to make the links from the bound subdev. Signed-off-by: -
Steve Longerbeam authored
Add a convenience function that can be used as the .get_fwnode_pad operation for subdevices that map port numbers and pad indexes 1:1. The function verifies the endpoint is owned by the subdevice, and if so returns the endpoint port number. Signed-off-by:
-
Steve Longerbeam authored
Add a missing pointer to the entity in the media_entity operation get_fwnode_pad. There are no implementers of this op yet, but a future entity that does so will almost certainly need a reference to itself to carry out the work. operation") Fixes: ae45cd5e ("[media] media: entity: Add get_fwnode_pad entity Signed-off-by:
-
