Fix checkpatch.pl warning:

WARNING: else is not generally useful after a break or return
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix these checkpatch.pl warnings:

WARNING: else is not generally useful after a break or return
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix these checkpatch.pl warnings:

WARNING: else is not generally useful after a break or return

Also, remove an unnecessary trailing ';' at the end of a function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix this checkpatch.pl warning:

WARNING: else is not generally useful after a break or return
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix these checkpatch.pl warnings:

WARNING: else is not generally useful after a break or return
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix these checkpatch.pl warnings:

WARNING: else is not generally useful after a break or return
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the checkpatch.pl warning in this file:

WARNING: else is not generally useful after a break or return
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the checkpatch.pl warning in this file:

WARNING: else is not generally useful after a break or return
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the checkpatch.pl warning in this file:

WARNING: else is not generally useful after a break or return
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

a fractured spelling in previous style issue fix mended.
Signed-off-by: Sam Asadi <asadi.samuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

'quoted string split across lines' warning in checkpatching fixed
by group whole string in one line.
Signed-off-by: Sam Asadi <asadi.samuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch fix - Add missing blank line after variable declaration
Signed-off-by: Igor Bezukh <igbzkh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes a checkpatch warning by replacing printk
by dev_warn. Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes uneeded typedefs reported by chackpatch and removes
one enum that is not in use. As checkpatch complained about the typedef
and the enum is not being used, this patch removes both typedef and enum.
The removed enum from card.h:

typedef enum _CARD_PHY_TYPE {
    PHY_TYPE_AUTO = 0,
    PHY_TYPE_11B,
    PHY_TYPE_11G,
    PHY_TYPE_11A
} CARD_PHY_TYPE, *PCARD_PHY_TYPE;

The following typedefs were removed, but enums were kept at device.h:

 typedef enum __device_msg_level
 typedef enum __DEVICE_NDIS_STATUS

Tested by compilation only.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This includes:
 - keep "else" on the same line as the closing brace
 - don't use "else" after "return"
 - don't issue a message for an out-of-memory error
 - blank line after a declaration
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the subdevice init and
tidy it up a bit.

Unfortunately we can't get rid of the '#ifdef PCIDMA' here yet due
to other ifdefery in this file. For now just add the correct test
so that the async command support is not hooked up unless we have
an IRQ and DMA.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the subdevice init and
tidy it up a bit.

Remove the need for the extra local variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the subdevice init.

Refactor the code so that the common parts of the subdevice are initialized
in one place.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

So of the boards supported by this driver do not have analog inputs and
some don't have analog outputs. Move the calls that reset these subdevices
during the (*attach) by ni_E_init() so they only happen if the subdevices
are present.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The init/reset of the hardware is a bit scattered in this function. For
aesthetics, move the init of the clock dividers so it happens early and
tidy up the code a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the Digital I/O subdevice init.

Only hook up the async command support if we have an irq.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All of the board supported by this driver have at least 8 Digital I/O
channels. A couple of the PCI boards in ni_pcimio have 32 channels.

For aesthetics, change this member of the boardinfo into a bit-field
flag, 'has_32dio_chan', and use that when initializing the DIO subdevice
to set the number of channels to 32 or 8.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the Analog Output subdevice init.

Also, remove the '#ifdef PCIDMA' here and only hook up the async command
support if we have an irq and the board either has a fifo or DMA is
supported.

The ni_pcimio driver is the only place PCIDMA is defined. That driver
is also the only user of ni_mio_common that allocates devpriv->mite. Use
that test instead to determine if dma is supported.

Move 'is_67xx' check and init_ao_67xx() call into the Analog Output
subdevice init. The 67xx boards all have analog outputs and this check
does not need to be done for the boards that do not have analog outputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the Analog Input subdevice init.

The callers of ni_E_init() do the request_irq() and set dev->irq if the
interrupt is available. Only hook up the async command support if we
have the irq.

Also, remove the '#ifdef PCIDMA' here. The ni_pcimio driver is the only
place PCIDMA is defined. That driver is also the only user of ni_mio_common
that allocates devpriv->mite. Use that test instead to determine if the
subdevice async_dma_dir member needs to be initialized.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi subdevice (*cancel) function can only be called by the core if the
subdevice supports async commands. Move the initialization of this callback
to it is only set if async commands are enabled.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, change the 'aobits' in the boardinfo to 'ao_maxdata'
to remove the need for the calculation of the subdevice 'maxdata'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, change the 'adbits' in the boardinfo to 'ai_maxdata'
to remove the need for the calculation of the subdevice 'maxdata'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, use the subdevice 'maxdata' instead of the board 'adbits'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi core expects (*insn_read) functions to return insn->n
data smaples. Fix this function to work like the core expects.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data can be determined by checking the
cmd->stop_src. Do that instead and remove the member.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the PCI6xxx boards use a different (*insn_write) function
for the analog output subdevice. Most of the code is identical to the
(*insn_write) used by all the other board types.

For aesthetics, merge the two (*insn_write) functions and handle the
'is_6xxx' differences in the common code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently ni_m_series_ao_config_chanlist() gets the boardinfo pointer in
order to get the number of analog output channels. Get this from the
comedi_subdevice instead.

The ni_old_ao_config_chanlist() function also gets the boardinfo pointer
to get the analog output resolution, 'aobits', in order to calculate the
value needed to convert samples from unsigned to two's complement for
bipolar ranges. Use the comedi_subdevice 'maxdata' instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

None of the boardinfo that uses this code sets the 'has_analog_trig' flag so
ni_ai_config_analog_trig() always returns -EINVAL.

Also, the private data 'atrig_low', 'atrig_high', and 'atrig_mode' values
that are set by ni_ai_config_analog_trig() are never used.

Remove the incomplete INSN_CONFIG_ANALOG_TRIG support along with the unused
boardinfo and private data members.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the bytes_per_sample() helper instead of 'sizeof(short)' to clarify
the length calculation.

Use comedi_offset_munge() to handle the unsigned to two's complement
munge of the data for bipolar ranges.

Tidy up the local variables.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The board->reg_type if checked quite often in the ni_mio_common.c code to
handle differences in the PCI devices supported by the ni_pcimio driver.
Simplify the code a bit by adding some 'is_{board type}' bit-field flags
to the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comedi (*insn_write) functions are expected to write insn->n values
to the hardware. Fix this function to work like the core expects.

Also, don't rely on the return value of ni_ao_comfig_chanlist() to
determine if the values need converted to two's complement before
writing to the hardware. Use the comedi_range_is_bipolar() and
comedi_offset_munge() helpers to clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This marco relies on a local variable having a specific name. Remove the
macro and just use ni_ao_win_outw() directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comedi (*insn_write) functions are expected to write insn->n values to
the hardware. Fix this function to work like the core expects.

Also, use the comedi_offset_munge() helper to convert the comedi unsigned
values into the two's complement values that the hardware needs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>