- 27 Apr, 2007 40 commits
-
-
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds authored
* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (184 commits) V4L/DVB (5563): Radio-maestro.c Replace radio_ioctl to use video_ioctl2 V4L/DVB (5562): Radio-gemtek-pci.c Replace gemtek_pci_ioctl to use video_ioctl2 V4L/DVB (5560): Ivtv: fix incorrect bitwise-and for command flags. V4L/DVB (5558): Opera: use 7-bit i2c addresses V4L/DVB (5557): Cafe_ccic: check return value of pci_enable_device V4L/DVB (5556): Radio-gemtek.c Replace gemtek_ioctl to use video_ioctl2 V4L/DVB (5555): Radio-aimslab.c Replace rt_ioctl to use video_ioctl2 V4L/DVB (5554): Fix: vidioc_g_parm were not zeroing the memory V4L/DVB (5553): Replace typhoon_do_ioctl to use video_ioctl2 V4L/DVB (5552): Plan-b: Switch to refcounting PCI API V4L/DVB (5551): Plan-b: header change V4L/DVB (5550): Radio-sf16fmi.c Replace fmi_do_ioctl to use video_ioctl2 V4L/DVB (5549): Radio-sf16fmr2.c Replace fmr2_do_ioctl to use video_ioctl2 V4L/DVB (5548): Fix v4l2 buffer to the length V4L/DVB (5547): Add ENUM_FRAMESIZES and ENUM_FRAMEINTERVALS ioctls V4L/DVB (5546): Radio-terratec.c Replace tt_do_ioctl to use video_ioctl2 V4L/DVB (5545): Saa7146: Release capture buffers on device close V4L/DVB (5544): Budget-av: Make inversion setting configurable, add KNC ONE V1.0 card V4L/DVB (5543): Tda10023: Add support for frontend TDA10023 V4L/DVB (5542): Budget-av: Remove polarity switching of the clock for DVB-C ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (46 commits) dev_dbg: check dev_dbg() arguments drivers/base/attribute_container.c: use mutex instead of binary semaphore mod_sysfs_setup() doesn't return errno when kobject_add_dir() failure occurs s2ram: add arch irq disable/enable hooks define platform wakeup hook, use in pci_enable_wake() security: prevent permission checking of file removal via sysfs_remove_group() device_schedule_callback() needs a module reference s390: cio: Delay uevents for subchannels sysfs: bin.c printk fix Driver core: use mutex instead of semaphore in DMA pool handler driver core: bus_add_driver should return an error if no bus debugfs: Add debugfs_create_u64() the overdue removal of the mount/umount uevents kobject: Comment and warning fixes to kobject.c Driver core: warn when userspace writes to the uevent file in a non-supported way Driver core: make uevent-environment available in uevent-file kobject core: remove rwsem from struct subsystem qeth: Remove usage of subsys.rwsem PHY: remove rwsem use from phy core IEEE1394: remove rwsem use from ieee1394 core ...
-
Douglas Landgraf authored
Convert radio-maestro to use video_ioctl2 Signed-off-by:
Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Douglas Landgraf authored
Convert radio-gemtek-pci to use video_ioctl2 Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Marco Gittler authored
- the tuner i2c addr now without define (as wanted). - now 7 bit addr are used (the power_ctrl fkt ist ok so, because this is a raw write) - the addr >> 1 , addr << 1 is ok so, i think beause the read write is now taken from the last bit. - now i have no datasheet for the device, all taken from usb-logs Signed-off-by:
Marco Gittler <g.marco@freenet.de> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Trent Piepho authored
Remove warnings Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Acked-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Douglas Landgraf authored
Convert radio-gemtek to use video_ioctl2 Signed-off-by:
-
Douglas Landgraf authored
Convert radio-aimslab to use video_ioctl2 Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Douglas Landgraf authored
Convert radio-typhoon to use video_ioctl2 Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Douglas Landgraf authored
Convert radio-sf16fmi to use video_ioctl2 Signed-off-by:
-
Douglas Landgraf authored
Convert radio-sf16fmr2 to use video_ioctl2 Signed-off-by:
-
Luc Saillard authored
Set the length of the v4l2 buffer to the length of the mapped memory. This should fix the problem with amsn. Signed-off-by: -
Luc Saillard authored
This patch add support for the VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS ioctl. * check if the maximum native framesize for raw mode is correct * raw mode framerates for all three chipset types Signed-off-by:
Gregor Jasny <gjasny@web.de> Signed-off-by:
Luc Saillard <luc@saillard.org> Signed-off-by:
-
Douglas Landgraf authored
Convert radio-terratec to use video_ioctl2 Signed-off-by:
-
Hartmut Birr authored
If the video device (saa7146 on a FF card) was open for capturing, the close call didn't release the capture buffers. Signed-off-by:
Hartmut Birr <e9hack@gmail.com> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Hartmut Birr authored
Make the inversion setting configurable. The KNC ONE V1.0 uses non inverted setting for the inversion and add the KNC ONE V1.0 card. Signed-off-by:
Hartmut Birr <e9hack@googlemail.com> Signed-off-by:
-
Hartmut Birr authored
Add support for the frontend TDA10023 and add cards that need the tda10023. Signed-off-by:
Georg Acher <acher@in.tum.de> Signed-off-by:
-
Hartmut Birr authored
Remove the polarity switching of the clock for the DVB-C cards in budget-av.c. This hack is no longer necessary because the saa7146 can do the job to remove the additional FEC bytes from the TS. Signed-off-by:
-
Douglas Landgraf authored
Convert radio-zoltrix to use video_ioctl2 Signed-off-by:
-
Douglas Landgraf authored
Convert radio-trust to use video ioctl2 Signed-off-by:
-
Douglas Landgraf authored
Implements VIDIOC_[GS]_AUDIO and VIDIOC_[S|G]_INPUT on radio-rtrack2 Signed-off-by:
-
Thierry MERLE authored
usbvision has a module parameter that ables the user to add a new USB entry at driver load. This functionality is useless by experience (adding statically the entry is easy). Furthermore, the USB_DEVICE(0xfff0, 0xfff0) USB entry caused usbvision_probe to be called for all unclaimed devices. Signed-off-by:
Thierry MERLE <thierry.merle@free.fr> Acked-by:
Dwaine Garden <DwaineGarden@rogers.com> Signed-off-by:
-
Douglas Landgraf authored
Convert radio-rtrack2 to use video_ioctl2 Signed-off-by:
-
Marco Gittler authored
This patch adds support for DVB-Opera S1 USB 2.0 BOX. Signed-off-by:
-
Thierry MERLE authored
usbvision_i2c: remove TUNER_SET_TYPE_ADDR call in attach_inform since it is done by tuner_core. Acked-by:
-
Thierry MERLE authored
usbvision-i2c.c: reverting some i2c cleanups in order to recover a safe state. Acked-by:
-
vignesh.babu@wipro.com authored
Replacing kmalloc/memset combination with kzalloc. Signed-off-by:
vignesh babu <vignesh.babu@wipro.com> Signed-off-by:
-
Trent Piepho authored
The code was testing an 8-bit address against a 7-bit address. Will the confusion of the two never cease? Biggest flaw of the I2C protocol: the R/W bit is the LSB instead of the MSB. No one can ever agree if addresses are 7-bits and the R/W bit follows them, or if they are 8-bit and the R/W bit is OR-ed into the address byte. If the R/W bit was first, it wouldn't make any difference! Signed-off-by:
-
Akinobu Mita authored
I got strange message when I did modprobe bt878: bt878_probe: card id=[0x0],[ <NULL> ] has DVB functions. The card_list array is terminated by sentinel entry. But this list is traversed by: for (i = 0, dvb_cards = card_list; i < ARRAY_SIZE(card_list); i++, dvb_cards++) { ... } in bt878_probe(). So this loop checks dummy sentinel entry, too. This patch removes unnecessary sentinel entry. Signed-off-by:Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Thierry MERLE authored
- Adding 0x86 as possible I2C addresses for TDA9887 to call TUNER_SET_TYPE_ADDR. Signed-off-by:
-
Thierry MERLE authored
- change a printk to PDEBUG when USB probe detects an unknown device. This will avoid a message log from usbvision when an unclaimed device is inserted. Signed-off-by:
-
Thierry MERLE authored
usbvision-i2c function renamings, code cleanup Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Ville-Pekka Vainio authored
It has come to my knowledge that the Technotrend 1500 DVB cards have been sold bundled with at least two different kinds of remotes, a grey one and a black one. This patch adds support for the extra keys in the black remote to ir-keymaps.c. Signed-off-by:
Ville-Pekka Vainio <vpivaini@cs.helsinki.fi> Signed-off-by:
-
Mauro Carvalho Chehab authored
Thanks to: Thierry MERLE <thierry.merle@free.fr> for pointing this Signed-off-by: -
Trent Piepho authored
One bit wide bitfields need to declared unsigned to have the range 0 to 1, or they have the range -1 to 0. A few techniques to reduce the driver's size by about 1700 bytes on ia32, probably more on x86-64. Put the biggest fields first, less padding is necessary that way. Put fields with a limited range into a smaller type. For example VideoChannels will fit in 3 bits, and TunerType can use 8 bits. Vin_Reg1, Vin_Reg2, and Dvi_yuv define values for 8-bit registers, but they can't just go into an 8-bit field with no changes, since -1 was used as a flag to indicate a value was not present. So what we do is create a one-bit flag for each one to indicate if a value is or is not present. This only takes 9 bits and has the added advantage that when the register isn't overridden (Vin_Reg[12] never are) it doesn't need to appear in the structure definition since the default value for the flag will be zero. Signed-off-by:
-
