Merge devfreq changes, PM QoS change, and power management tools and
documentation changes for v5.20-rc1:

 - Add new devfreq driver for Mediatek CCI (Cache Coherent
   Interconnect) (Johnson Wang).

 - Convert the Samsung Exynos SoC Bus bindings to DT schema of
   exynos-bus.c (Krzysztof Kozlowski).

 - Address kernel-doc warnings by adding the description for unused
   fucntion parameters in devfreq core (Mauro Carvalho Chehab).

 - Use NULL to pass a null pointer rather than zero according to the
   function propotype in imx-bus.c (Colin Ian King).

 - Print error message instead of error interger value in
   tegra30-devfreq.c (Dmitry Osipenko).

 - Add checks to prevent setting negative frequency QoS limits for
   CPUs (Shivnandan Kumar).

 - Update the pm-graph suite of utilities to the latest revision 5.9
   including multiple improvements (Todd Brandt).

 - Drop pme_interrupt reference from the PCI power management
   documentation (Mario Limonciello).

* pm-devfreq:
  PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
  PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
  PM / devfreq: shut up kernel-doc warnings
  dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
  PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
  dt-bindings: interconnect: Add MediaTek CCI dt-bindings

* pm-qos:
  PM: QoS: Add check to make sure CPU freq is non-negative

* pm-tools:
  pm-graph v5.9

* pm-docs:
  Documentation: PM: Drop pme_interrupt reference

Merge core device power management changes for v5.20-rc1:

 - Extend support for wakeirq to callback wrappers used during system
   suspend and resume (Ulf Hansson).

 - Defer waiting for device probe before loading a hibernation image
   till the first actual device access to avoid possible deadlocks
   reported by syzbot (Tetsuo Handa).

 - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
   Helgaas).

 - Add Raptor Lake-P to the list of processors supported by the Intel
   RAPL driver (George D Sworo).

 - Add Alder Lake-N and Raptor Lake-P to the list of processors for
   which Power Limit4 is supported in the Intel RAPL driver (Sumeet
   Pawnikar).

 - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
   attempting to remove it (Hsin-Yi Wang).

 - Change the Energy Model code to represent power in micro-Watts and
   adjust its users accordingly (Lukasz Luba).

* pm-core:
  PM: runtime: Extend support for wakeirq for force_suspend|resume

* pm-sleep:
  PM: hibernate: defer device probing when resuming from hibernation
  PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP

* powercap:
  powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
  powercap: intel_rapl: Add support for RAPTORLAKE_P

* pm-domains:
  PM: domains: Ensure genpd_debugfs_dir exists before remove

* pm-em:
  cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
  firmware: arm_scmi: Get detailed power scale from perf
  Documentation: EM: Switch to micro-Watts scale
  PM: EM: convert power field to micro-Watts precision and align drivers

Merge processor power management changes for v5.20-rc1:

 - Make cpufreq_show_cpus() more straightforward (Viresh Kumar).

 - Drop unnecessary CPU hotplug locking from store() used by cpufreq
   sysfs attributes (Viresh Kumar).

 - Make the ACPI cpufreq driver support the boost control interface on
   Zhaoxin/Centaur processors (Tony W Wang-oc).

 - Print a warning message on attempts to free an active cpufreq policy
   which should never happen (Viresh Kumar).

 - Fix grammar in the Kconfig help text for the loongson2 cpufreq
   driver (Randy Dunlap).

 - Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
   governor (Zhao Liu).

 - Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
   cpuidle driver (Eiichi Tsukata).

 - Modify intel_idle to treat C1 and C1E as independent idle states on
   Sapphire Rapids (Artem Bityutskiy).

* pm-cpufreq:
  cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
  cpufreq: loongson2: fix Kconfig "its" grammar
  cpufreq: Warn users while freeing active policy
  cpufreq: ACPI: Add Zhaoxin/Centaur turbo boost control interface support
  cpufreq: Drop unnecessary cpus locking from store()
  cpufreq: Optimize cpufreq_show_cpus()

* pm-cpuidle:
  intel_idle: make SPR C1 and C1E be independent
  cpuidle: haltpoll: Add trace points for guest_halt_poll_ns grow/shrink

Add Alder Lake-N and Raptor Lake-P to the list of processor models
for which Power Limit4 is supported by the Intel RAPL driver.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

CPU frequency should never be negative.

If some client driver calls freq_qos_update_request with a
negative value which will be very high in absolute terms,
then frequency QoS sets max CPU freq at fmax as it considers
it's absolute value but it will add plist node with negative
priority.

plist node has priority from INT_MIN (highest) to INT_MAX(lowest).
Once priority is set as negative, another client will not be able
to reduce CPU frequency.

Adding check to make sure CPU freq is non-negative will fix
this problem.
Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

syzbot is reporting hung task at misc_open() [1], for there is a race
window of AB-BA deadlock which involves probe_count variable. Currently
wait_for_device_probe() from snapshot_open() from misc_open() can sleep
forever with misc_mtx held if probe_count cannot become 0.

When a device is probed by hub_event() work function, probe_count is
incremented before the probe function starts, and probe_count is
decremented after the probe function completed.

There are three cases that can prevent probe_count from dropping to 0.

  (a) A device being probed stopped responding (i.e. broken/malicious
      hardware).

  (b) A process emulating a USB device using /dev/raw-gadget interface
      stopped responding for some reason.

  (c) New device probe requests keeps coming in before existing device
      probe requests complete.

The phenomenon syzbot is reporting is (b). A process which is holding
system_transition_mutex and misc_mtx is waiting for probe_count to become
0 inside wait_for_device_probe(), but the probe function which is called
 from hub_event() work function is waiting for the processes which are
blocked at mutex_lock(&misc_mtx) to respond via /dev/raw-gadget interface.

This patch mitigates (b) by deferring wait_for_device_probe() from
snapshot_open() to snapshot_write() and snapshot_ioctl(). Please note that
the possibility of (b) remains as long as any thread which is emulating a
USB device via /dev/raw-gadget interface can be blocked by uninterruptible
blocking operations (e.g. mutex_lock()).

Please also note that (a) and (c) are not addressed. Regarding (c), we
should change the code to wait for only one device which contains the
image for resuming from hibernation. I don't know how to address (a), for
use of timeout for wait_for_device_probe() might result in loss of user
data in the image. Maybe we should require the userland to wait for the
image device before opening /dev/snapshot interface.

Link: https://syzkaller.appspot.com/bug?extid=358c9ab4c93da7b7238c [1]
Reported-by: syzbot <syzbot+358c9ab4c93da7b7238c@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+358c9ab4c93da7b7238c@syzkaller.appspotmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch partially reverts the changes made by the following commit:

da0e58c0 intel_idle: add 'preferred_cstates' module argument

As that commit describes, on early Sapphire Rapids Xeon platforms the C1 and
C1E states were mutually exclusive, so that users could only have either C1 and
C6, or C1E and C6.

However, Intel firmware engineers managed to remove this limitation and make C1
and C1E to be completely independent, just like on previous Xeon platforms.

Therefore, this patch:
 * Removes commentary describing the old, and now non-existing SPR C1E
   limitation.
 * Marks SPR C1E as available by default.
 * Removes the 'preferred_cstates' parameter handling for SPR. Both C1 and
   C1E will be available regardless of 'preferred_cstates' value.

We expect that all SPR systems are shipping with new firmware, which includes
the C1/C1E improvement.

Cc: v5.18+ <stable@vger.kernel.org> # v5.18+
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

A cpumask structure on the stack can cause a warning with
CONFIG_NR_CPUS=8192 (e.g. Ubuntu 22.04 uses this):

drivers/cpufreq/cpufreq_ondemand.c: In function 'od_set_powersave_bias':
drivers/cpufreq/cpufreq_ondemand.c:449:1: warning: the frame size of
	1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
  449 | }
      | ^

CONFIG_CPUMASK_OFFSTACK=y is enabled by default for most distros, and
hence we can work around the warning by using cpumask_var_t.
Signed-off-by: Zhao Liu <zhao1.liu@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Use the possessive "its" instead of the contraction "it's"
where appropriate.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 32d4fd57 ("cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE")
uses raw_local_irq_enable/local_irq_disable() around call to
__intel_idle() in intel_idle_irq().

With interrupt enabled, timer tick interrupt can happen and a
subsequently call to __do_softirq() may change the lockdep hardirqs state
of a debug kernel back to 'on'. This will result in a mismatch between
the cpu hardirqs state (off) and the lockdep hardirqs state (on) causing
a number of false positive "WARNING: suspicious RCU usage" splats.

Fix that by using local_irq_disable() to disable interrupt in
intel_idle_irq().

Fixes: 32d4fd57 ("cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE")
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This code requires x509_load_certificate_list() to be built-in.

Fixes: 60050ffe ("certs: Move load_certificate_list() to be with the asymmetric keys code")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/202206221515.DqpUuvbQ-lkp@intel.com/
Link: https://lore.kernel.org/all/20220712104554.408dbf42@gandalf.local.home/Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull perf fix from Borislav Petkov:

 - Reorganize the perf LBR init code so that a TSX quirk is applied
   early enough in order for the LBR MSR access to not #GP

* tag 'perf_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/lbr: Fix unchecked MSR access error on HSW

Pull scheduler fix from Borislav Petkov:
 "A single fix to correct a wrong BUG_ON() condition for deboosted
  tasks"

* tag 'sched_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Fix BUG_ON condition for deboosted tasks

Pull x86 fixes from Borislav Petkov:
 "A couple more retbleed fallout fixes.

  It looks like their urgency is decreasing so it seems like we've
  managed to catch whatever snafus the limited -rc testing has exposed.
  Maybe we're getting ready... :)

   - Make retbleed mitigations 64-bit only (32-bit will need a bit more
     work if even needed, at all).

   - Prevent return thunks patching of the LKDTM modules as it is not
     needed there

   - Avoid writing the SPEC_CTRL MSR on every kernel entry on eIBRS
     parts

   - Enhance error output of apply_returns() when it fails to patch a
     return thunk

   - A sparse fix to the sev-guest module

   - Protect EFI fw calls by issuing an IBPB on AMD"

* tag 'x86_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation: Make all RETbleed mitigations 64-bit only
  lkdtm: Disable return thunks in rodata.c
  x86/bugs: Warn when "ibrs" mitigation is selected on Enhanced IBRS parts
  x86/alternative: Report missing return thunk details
  virt: sev-guest: Pass the appropriate argument type to iounmap()
  x86/amd: Use IBPB for firmware calls

Pull clk fix from Stephen Boyd:
 "One more fix to set the correct IO mapping for a clk gate in the
  lan966x driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: lan966x: Fix the lan966x clock gate register address

Pull kvm fixes from Paolo Bonzini:

 - Check for invalid flags to KVM_CAP_X86_USER_SPACE_MSR

 - Fix use of sched_setaffinity in selftests

 - Sync kernel headers to tools

 - Fix KVM_STATS_UNIT_MAX

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Protect the unused bits in MSR exiting flags
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  KVM: selftests: Fix target thread to be migrated in rseq_test
  KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean stats

The mitigations for RETBleed are currently ineffective on x86_32 since
entry_32.S does not use the required macros.  However, for an x86_32
target, the kconfig symbols for them are still enabled by default and
/sys/devices/system/cpu/vulnerabilities/retbleed will wrongly report
that mitigations are in place.

Make all of these symbols depend on X86_64, and only enable RETHUNK by
default on X86_64.

Fixes: f43b9876 ("x86/retbleed: Add fine grained Kconfig knobs")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YtwSR3NNsWp1ohfV@decadent.org.uk

Pull spi fixes from Mark Brown:
 "A few more small driver specific fixes"

* tag 'spi-fix-v5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-rspi: Fix PIO fallback on RZ platforms
  spi: spi-cadence: Fix SPI NO Slave Select macro definition
  spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers

Pull RISC-V fixes from Palmer Dabbelt:

 - Two kexec-related build fixes

 - A DTS update to make the GPIO nodes match the upcoming dtschema

 - A fix that passes -mno-relax directly to the assembler when building
   modules, to work around compilers that fail to do so

* tag 'riscv-for-linus-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: add as-options for modules with assembly compontents
  riscv: dts: align gpio-key node names with dtschema
  RISC-V: kexec: Fix build error without CONFIG_KEXEC
  RISCV: kexec: Fix build error without CONFIG_MODULES

Pull ACPI fix from Rafael Wysocki:
 "Fix yet another piece of ACPI CPPC changes fallout on AMD platforms
  (Mario Limonciello)"

* tag 'acpi-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: CPPC: Don't require flexible address space if X86_FEATURE_CPPC is supported

Pull io_uring fixes from Jens Axboe:
 "Fix for a bad kfree() introduced in this cycle, and a quick fix for
  disabling buffer recycling for IORING_OP_READV.

  The latter will get reworked for 5.20, but it gets the job done for
  5.19"

* tag 'io_uring-5.19-2022-07-21' of git://git.kernel.dk/linux-block:
  io_uring: do not recycle buffer in READV
  io_uring: fix free of unallocated buffer list

Pull block fix from Jens Axboe:
 "Just a single fix for missing error propagation for an allocation
  failure in raid5"

* tag 'block-5.19-2022-07-21' of git://git.kernel.dk/linux-block:
  md/raid5: missing error code in setup_conf()

Pull i2c fixes from Wolfram Sang:
 "Two driver bugfixes and a typo fix"

* tag 'i2c-for-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: cadence: Change large transfer count reset logic to be unconditional
  i2c: imx: fix typo in comment
  i2c: mlxcpld: Fix register setting for 400KHz frequency

Pull gpio fixes from Bartosz Golaszewski:

 - fix several regmap usage issues in gpio-pca953x

 - fix out-of-tree build for GPIO selftests

 - fix integer overflow in gpio-xilinx

* tag 'gpio-fixes-for-v5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: gpio-xilinx: Fix integer overflow
  selftests: gpio: fix include path to kernel headers for out of tree builds
  gpio: pca953x: use the correct register address when regcache sync during init
  gpio: pca953x: use the correct range when do regmap sync
  gpio: pca953x: only use single read/write for No AI mode

Pull pin control fixes from Linus Walleij:
 "Only driver fixes:

   - NULL check for the ralink and sunplus drivers

   - Add Jacky Bai as maintainer for the Freescale pin controllers

   - Fix pin config ops for the Ocelot LAN966x and SparX5

   - Disallow AMD pin control to be a module: the GPIO lines need to be
     active in early boot, so no can do

   - Fix the Armada 37xx to use raw spinlocks in the interrupt handler
     path to avoid wait context"

* tag 'pinctrl-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: armada-37xx: use raw spinlocks for regmap to avoid invalid wait context
  pinctrl: armada-37xx: make irq_lock a raw spinlock to avoid invalid wait context
  pinctrl: Don't allow PINCTRL_AMD to be a module
  pinctrl: ocelot: Fix pincfg
  pinctrl: ocelot: Fix pincfg for lan966x
  MAINTAINERS: Update freescale pin controllers maintainer
  pinctrl: sunplus: Add check for kcalloc
  pinctrl: ralink: Check for null return of devm_kcalloc

Pull sound fixes from Takashi Iwai:
 "Only undoes the Rockchip BCLK changes to address a regression"

* tag 'sound-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: rockchip-i2s: Undo BCLK pinctrl changes
  ASoC: rockchip: i2s: Fix NULL pointer dereference when pinctrl is not found

Pull MMC fix from Ulf Hansson:

 - sdhci-omap: Fix a lockdep warning while probing

* tag 'mmc-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-omap: Fix a lockdep warning for PM runtime init

Pull drm fixes from Dave Airlie:
 "Fixes for this week.

  The main one is the i915 firmware fix for the phoronix reported issue.
  I've written some firmware guidelines as a result, should land in
  -next soon. Otherwise a few amdgpu fixes, a scheduler fix, ttm fix and
  two other minor ones.

  scheduler:
   - scheduling while atomic fix

  ttm:
   - locking fix

  edp:
   - variable typo fix

  i915:
   - add back support for v69 firmware on ADL-P

  amdgpu:
   - Drop redundant buffer cleanup that can lead to a segfault
   - Add a bo_list mutex to avoid possible list corruption in CS
   - dmub notification fix

  imx:
   - fix error path"

* tag 'drm-fixes-2022-07-22' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2
  drm/imx/dcss: Add missing of_node_put() in fail path
  drm/i915/guc: support v69 in parallel to v70
  drm/i915/guc: Support programming the EU priority in the GuC descriptor
  drm/panel-edp: Fix variable typo when saving hpd absent delay from DT
  drm/amdgpu: Remove one duplicated ef removal
  drm/ttm: fix locking in vmap/vunmap TTM GEM helpers
  drm/scheduler: Don't kill jobs in interrupt context
  drm/amd/display: Fix new dmub notification enabling in DM

Merge tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU fix from Paul McKenney:
 "This contains a pair of commits that fix 282d8998 ("srcu: Prevent
  expedited GPs and blocking readers from consuming CPU"), which was
  itself a fix to an SRCU expedited grace-period problem that could
  prevent kernel live patching (KLP) from completing.

  That SRCU fix for KLP introduced large (as in minutes) boot-time
  delays to embedded Linux kernels running on qemu/KVM. These delays
  were due to the emulation of certain MMIO operations controlling
  memory layout, which were emulated with one expedited grace period per
  access. Common configurations required thousands of boot-time MMIO
  accesses, and thus thousands of boot-time expedited SRCU grace
  periods.

  In these configurations, the occasional sleeps that allowed KLP to
  proceed caused excessive boot delays. These commits preserve enough
  sleeps to permit KLP to proceed, but few enough that the virtual
  embedded kernels still boot reasonably quickly.

  This represents a regression introduced in the v5.19 merge window, and
  the bug is causing significant inconvenience"

* tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  srcu: Make expedited RCU grace periods block even less frequently
  srcu: Block less aggressively for expedited grace periods

Sudip reports that alpha doesn't build properly, with errors like

  include/asm-generic/tlb.h:401:1: error: redefinition of 'tlb_update_vma_flags'
    401 | tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma)
        | ^~~~~~~~~~~~~~~~~~~~
  include/asm-generic/tlb.h:372:1: note: previous definition of 'tlb_update_vma_flags' with type 'void(struct mmu_gather *, struct vm_area_struct *)'
    372 | tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma) { }

the cause being that We have this odd situation where some architectures
were never converted to the newer TLB flushing interfaces that have a
range for the flush.  Instead people left them alone, and we have them
select the MMU_GATHER_NO_RANGE config option to make the tlb header
files account for this.

Peter Zijlstra cleaned some of these nasty header file games up in
commits

  1e9fdf21 ("mmu_gather: Remove per arch tlb_{start,end}_vma()")
  18ba064e ("mmu_gather: Let there be one tlb_{start,end}_vma() implementation")

but tlb_update_vma_flags() was left alone, and then commit b67fbebd
("mmu_gather: Force tlb-flush VM_PFNMAP vmas") ended up removing only
_one_ of the two stale duplicate dummy inline functions.

This removes the other stale one.

Somebody braver than me should try to remove MMU_GATHER_NO_RANGE
entirely, but it requires fixing up the oddball architectures that use
it: alpha, m68k, microblaze, nios2 and openrisc.

The fixups should be fairly straightforward ("fix the build errors it
exposes by adding the appropriate range arguments"), but the reason this
wasn't done in the first place is that so few people end up working on
those architectures.  But it could be done one architecture at a time,
hint, hint.
Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Fixes: b67fbebd ("mmu_gather: Force tlb-flush VM_PFNMAP vmas")
Link: https://lore.kernel.org/all/YtpXh0QHWwaEWVAY@debian/
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Current implementation is not able to configure more than 32 pins
due to incorrect data type. So type casting with unsigned long
to avoid it.

Fixes: 02b3f84d ("xilinx: Switch to use bitmap APIs")
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

A scheduling-while-atomic fix for drm/scheduler, a locking fix for TTM,
a typo fix for panel-edp and a resource removal fix for imx/dcss
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220721085550.hrwbukj34y56rzva@houat

When trying to load modules built for RISC-V which include assembly files
the kernel loader errors with "unexpected relocation type 'R_RISCV_ALIGN'"
due to R_RISCV_ALIGN relocations being generated by the assembler.

The R_RISCV_ALIGN relocations can be removed at the expense of code space
by adding -mno-relax to gcc and as.  In commit 7a8e7da4
("RISC-V: Fixes to module loading") -mno-relax is added to the build
variable KBUILD_CFLAGS_MODULE. See [1] for more info.

The issue is that when kbuild builds a .S file, it invokes gcc with
the -mno-relax flag, but this is not being passed through to the
assembler. Adding -Wa,-mno-relax to KBUILD_AFLAGS_MODULE ensures that
the assembler is invoked correctly. This may have now been fixed in
gcc[2] and this addition should not stop newer gcc and as from working.

[1] https://github.com/riscv/riscv-elf-psabi-doc/issues/183
[2] https://github.com/gcc-mirror/gcc/commit/3b0a7d624e64eeb81e4d5e8c62c46d86ef521857Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Link: https://lore.kernel.org/r/20220529152200.609809-1-ben.dooks@codethink.co.uk
Fixes: ab1ef68e ("RISC-V: Add sections of PLT and GOT for kernel module")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull MTD fix from Richard Weinberger:
 "A aingle NAND controller fix:

   - gpmi: Fix busy timeout setting (wrong calculation, yes again)"

* tag 'mtd/fixes-for-5.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: gpmi: Set WAIT_FOR_READY timeout based on program/erase times

Pull networking fixes from Paolo Abeni:
 "Including fixes from can.

  Still no major regressions, most of the changes are still due to data
  races fixes, plus the usual bunch of drivers fixes.

  Previous releases - regressions:

   - tcp/udp: make early_demux back namespacified.

   - dsa: fix issues with vlan_filtering_is_global

  Previous releases - always broken:

   - ip: fix data-races around ipv4_net_table (round 2, 3 & 4)

   - amt: fix validation and synchronization bugs

   - can: fix detection of mcp251863

   - eth: iavf: fix handling of dummy receive descriptors

   - eth: lan966x: fix issues with MAC table

   - eth: stmmac: dwmac-mediatek: fix clock issue

  Misc:

   - dsa: update documentation"

* tag 'net-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
  mlxsw: spectrum_router: Fix IPv4 nexthop gateway indication
  net/sched: cls_api: Fix flow action initialization
  tcp: Fix data-races around sysctl_tcp_max_reordering.
  tcp: Fix a data-race around sysctl_tcp_abort_on_overflow.
  tcp: Fix a data-race around sysctl_tcp_rfc1337.
  tcp: Fix a data-race around sysctl_tcp_stdurg.
  tcp: Fix a data-race around sysctl_tcp_retrans_collapse.
  tcp: Fix data-races around sysctl_tcp_slow_start_after_idle.
  tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts.
  tcp: Fix data-races around sysctl_tcp_recovery.
  tcp: Fix a data-race around sysctl_tcp_early_retrans.
  tcp: Fix data-races around sysctl knobs related to SYN option.
  udp: Fix a data-race around sysctl_udp_l3mdev_accept.
  ip: Fix data-races around sysctl_ip_prot_sock.
  ipv4: Fix data-races around sysctl_fib_multipath_hash_fields.
  ipv4: Fix data-races around sysctl_fib_multipath_hash_policy.
  ipv4: Fix a data-race around sysctl_fib_multipath_use_neigh.
  can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe()
  can: mcp251xfd: fix detection of mcp251863
  Documentation: fix udp_wmem_min in ip-sysctl.rst
  ...

Jann reported a race between munmap() and unmap_mapping_range(), where
unmap_mapping_range() will no-op once unmap_vmas() has unlinked the
VMA; however munmap() will not yet have invalidated the TLBs.

Therefore unmap_mapping_range() will complete while there are still
(stale) TLB entries for the specified range.

Mitigate this by force flushing TLBs for VM_PFNMAP ranges.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that architectures are no longer allowed to override
tlb_{start,end}_vma() re-arrange code so that there is only one
implementation for each of these functions.

This much simplifies trying to figure out what they actually do.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The previous patch removed the tlb_flush_end() implementation which
used tlb_flush_range(). This means:

 - csky did double invalidates, a range invalidate per vma and a full
   invalidate at the end

 - csky actually has range invalidates and as such the generic
   tlb_flush implementation is more efficient for it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>