- 15 Aug, 2012 18 commits
-
-
Theodore Ts'o authored
commit 775f4b29 upstream. We've been moving away from add_interrupt_randomness() for various reasons: it's too expensive to do on every interrupt, and flooding the CPU with interrupts could theoretically cause bogus floods of entropy from a somewhat externally controllable source. This solves both problems by limiting the actual randomness addition to just once a second or after 64 interrupts, whicever comes first. During that time, the interrupt cycle data is buffered up in a per-cpu pool. Also, we make sure the the nonblocking pool used by urandom is initialized before we start feeding the normal input pool. This assures that /dev/urandom is returning unpredictable data as soon as possible. (Based on an original patch by Linus, but significantly modified by tytso.) Tested-by:
Eric Wustrow <ewust@umich.edu> Reported-by:
Nadia Heninger <nadiah@cs.ucsd.edu> Reported-by:
Zakir Durumeric <zakir@umich.edu> Reported-by:
J. Alex Halderman <jhalderm@umich.edu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathieu Desnoyers authored
commit 44e4360f upstream. /proc/sys/kernel/random/boot_id can be read concurrently by userspace processes. If two (or more) user-space processes concurrently read boot_id when sysctl_bootid is not yet assigned, a race can occur making boot_id differ between the reads. Because the whole point of the boot id is to be unique across a kernel execution, fix this by protecting this operation with a spinlock. Given that this operation is not frequently used, hitting the spinlock on each call should not be an issue. Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
H. Peter Anvin authored
commit 2dac8e54 upstream. When we are initializing using arch_get_random_long() we only need to loop enough times to touch all the bytes in the buffer; using poolwords for that does twice the number of operations necessary on a 64-bit machine, since in the random number generator code "word" means 32 bits. Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Link: http://lkml.kernel.org/r/1324589281-31931-1-git-send-email-tytso@mit.eduSigned-off-by:
-
Theodore Ts'o authored
commit 3e88bdff upstream. If there is an architecture-specific random number generator (such as RDRAND for Intel architectures), use it to initialize /dev/random's entropy stores. Even in the worst case, if RDRAND is something like AES(NSA_KEY, counter++), it won't hurt, and it will definitely help against any other adversaries. Signed-off-by:
-
Linus Torvalds authored
commit cf833d0b upstream. We still don't use rdrand in /dev/random, which just seems stupid. We accept the *cycle*counter* as a random input, but we don't accept rdrand? That's just broken. Sure, people can do things in user space (write to /dev/random, use rdrand in addition to /dev/random themselves etc etc), but that *still* seems to be a particularly stupid reason for saying "we shouldn't bother to try to do better in /dev/random". And even if somebody really doesn't trust rdrand as a source of random bytes, it seems singularly stupid to trust the cycle counter *more*. So I'd suggest the attached patch. I'm not going to even bother arguing that we should add more bits to the entropy estimate, because that's not the point - I don't care if /dev/random fills up slowly or not, I think it's just stupid to not use the bits we can get from rdrand and mix them into the strong randomness pool. Link: http://lkml.kernel.org/r/CA%2B55aFwn59N1=m651QAyTy-1gO1noGbK18zwKDwvwqnravA84A@mail.gmail.comAcked-by:
"David S. Miller" <davem@davemloft.net> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Cc: Matt Mackall <mpm@selenic.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Luck, Tony authored
commit bd29e568 upstream. If there is an architecture-specific random number generator we use it to acquire randomness one "long" at a time. We should put these random words into consecutive words in the result buffer - not just overwrite the first word again and again. Signed-off-by:
Tony Luck <tony.luck@intel.com> Acked-by:
H. Peter Anvin <hpa@zytor.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
H. Peter Anvin authored
commit 63d77173 upstream. Add support for architecture-specific hooks into the kernel-directed random number generator interfaces. This patchset does not use the architecture random number generator interfaces for the userspace-directed interfaces (/dev/random and /dev/urandom), thus eliminating the need to distinguish between them based on a pool pointer. Changes in version 3: - Moved the hooks from extract_entropy() to get_random_bytes(). - Changes the hooks to inlines. Signed-off-by:
-
Alan Cox authored
commit d6250a3f upstream. The Intel case falls through into the generic case which then changes the values. For cases like the P6 it doesn't do the right thing so this seems to be a screwup. Signed-off-by:
Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/n/tip-lww2uirad4skzjlmrm0vru8o@git.kernel.orgSigned-off-by:
-
Johannes Berg authored
commit dd4c9260 upstream. The mesh path timer needs to be canceled when leaving the mesh as otherwise it could fire after the interface has been removed already. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Xiao Guangrong authored
commit 3ad3d901 upstream. mmu_notifier_release() is called when the process is exiting. It will delete all the mmu notifiers. But at this time the page belonging to the process is still present in page tables and is present on the LRU list, so this race will happen: CPU 0 CPU 1 mmu_notifier_release: try_to_unmap: hlist_del_init_rcu(&mn->hlist); ptep_clear_flush_notify: mmu nofifler not found free page !!!!!! /* * At the point, the page has been * freed, but it is still mapped in * the secondary MMU. */ mn->ops->release(mn, mm); Then the box is not stable and sometimes we can get this bug: [ 738.075923] BUG: Bad page state in process migrate-perf pfn:03bec [ 738.075931] page:ffffea00000efb00 count:0 mapcount:0 mapping: (null) index:0x8076 [ 738.075936] page flags: 0x20000000000014(referenced|dirty) The same issue is present in mmu_notifier_unregister(). We can call ->release before deleting the notifier to ensure the page has been unmapped from the secondary MMU before it is freed. Signed-off-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Will Deacon authored
commit b74253f7 upstream. The vivt_flush_cache_{range,page} functions check that the mm_struct of the VMA being flushed has been active on the current CPU before performing the cache maintenance. The gate_vma has a NULL mm_struct pointer and, as such, will cause a kernel fault if we try to flush it with the above operations. This happens during ELF core dumps, which include the gate_vma as it may be useful for debugging purposes. This patch adds checks to the VIVT cache flushing functions so that VMAs with a NULL mm_struct are flushed unconditionally (the vectors page may be dirty if we use it to store the current TLS pointer). Reported-by:
Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> Tested-by:
Uros Bizjak <ubizjak@gmail.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Will Deacon authored
commit 5a783cbc upstream. Commit cdf357f1 ("ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID") replaced by-ASID TLB flushing operations with all-ASID variants to workaround A9 erratum #720789. This patch extends the workaround to include the tlb_range operations, which were overlooked by the original patch. Tested-by:
Steve Capper <steve.capper@arm.com> Signed-off-by:
-
Joonsoo Kim authored
commit dc32f634 upstream. Commit a6bc32b8 ("mm: compaction: introduce sync-light migration for use by compaction") changed the declaration of migrate_pages() and migrate_huge_pages(). But it missed changing the argument of migrate_huge_pages() in soft_offline_huge_page(). In this case, we should call migrate_huge_pages() with MIGRATE_SYNC. Additionally, there is a mismatch between type the of argument and the function declaration for migrate_pages(). Signed-off-by:
Joonsoo Kim <js1304@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by:
David Rientjes <rientjes@google.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Greg Pearson authored
commit 6c4088ac upstream. efi_setup_pcdp_console() is called during boot to parse the HCDP/PCDP EFI system table and setup an early console for printk output. The routine uses ioremap/iounmap to setup access to the HCDP/PCDP table information. The call to ioremap is happening early in the boot process which leads to a panic on x86_64 systems: panic+0x01ca do_exit+0x043c oops_end+0x00a7 no_context+0x0119 __bad_area_nosemaphore+0x0138 bad_area_nosemaphore+0x000e do_page_fault+0x0321 page_fault+0x0020 reserve_memtype+0x02a1 __ioremap_caller+0x0123 ioremap_nocache+0x0012 efi_setup_pcdp_console+0x002b setup_arch+0x03a9 start_kernel+0x00d4 x86_64_start_reservations+0x012c x86_64_start_kernel+0x00fe This replaces the calls to ioremap/iounmap in efi_setup_pcdp_console() with calls to early_ioremap/early_iounmap which can be called during early boot. This patch was tested on an x86_64 prototype system which uses the HCDP/PCDP table for early console setup. Signed-off-by:
Greg Pearson <greg.pearson@hp.com> Acked-by:
Khalid Aziz <khalid.aziz@hp.com> Signed-off-by:
-
Ryusuke Konishi authored
commit 572d8b39 upstream. An fs-thaw ioctl causes deadlock with a chcp or mkcp -s command: chcp D ffff88013870f3d0 0 1325 1324 0x00000004 ... Call Trace: nilfs_transaction_begin+0x11c/0x1a0 [nilfs2] wake_up_bit+0x20/0x20 copy_from_user+0x18/0x30 [nilfs2] nilfs_ioctl_change_cpmode+0x7d/0xcf [nilfs2] nilfs_ioctl+0x252/0x61a [nilfs2] do_page_fault+0x311/0x34c get_unmapped_area+0x132/0x14e do_vfs_ioctl+0x44b/0x490 __set_task_blocked+0x5a/0x61 vm_mmap_pgoff+0x76/0x87 __set_current_blocked+0x30/0x4a sys_ioctl+0x4b/0x6f system_call_fastpath+0x16/0x1b thaw D ffff88013870d890 0 1352 1351 0x00000004 ... Call Trace: rwsem_down_failed_common+0xdb/0x10f call_rwsem_down_write_failed+0x13/0x20 down_write+0x25/0x27 thaw_super+0x13/0x9e do_vfs_ioctl+0x1f5/0x490 vm_mmap_pgoff+0x76/0x87 sys_ioctl+0x4b/0x6f filp_close+0x64/0x6c system_call_fastpath+0x16/0x1b where the thaw ioctl deadlocked at thaw_super() when called while chcp was waiting at nilfs_transaction_begin() called from nilfs_ioctl_change_cpmode(). This deadlock is 100% reproducible. This is because nilfs_ioctl_change_cpmode() first locks sb->s_umount in read mode and then waits for unfreezing in nilfs_transaction_begin(), whereas thaw_super() locks sb->s_umount in write mode. The locking of sb->s_umount here was intended to make snapshot mounts and the downgrade of snapshots to checkpoints exclusive. This fixes the deadlock issue by replacing the sb->s_umount usage in nilfs_ioctl_change_cpmode() with a dedicated mutex which protects snapshot mounts. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Tested-by:
-
Stanislav Kinsbursky authored
commit caea33da upstream. Without this patch kernel will panic on LockD start, because lockd_up() checks lockd_up_net() result for negative value. From my pow it's better to return negative value from rpcbind routines instead of replacing all such checks like in lockd_up(). Signed-off-by:
Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Tony Luck authored
commit a1193655 upstream. The following build error occured during a ia64 build with swap-over-NFS patches applied. net/core/sock.c:274:36: error: initializer element is not constant net/core/sock.c:274:36: error: (near initialization for 'memalloc_socks') net/core/sock.c:274:36: error: initializer element is not constant This is identical to a parisc build error. Fengguang Wu, Mel Gorman and James Bottomley did all the legwork to track the root cause of the problem. This fix and entire commit log is shamelessly copied from them with one extra detail to change a dubious runtime use of ATOMIC_INIT() to atomic_set() in drivers/char/mspec.c Dave Anglin says: > Here is the line in sock.i: > > struct static_key memalloc_socks = ((struct static_key) { .enabled = > ((atomic_t) { (0) }) }); The above line contains two compound literals. It also uses a designated initializer to initialize the field enabled. A compound literal is not a constant expression. The location of the above statement isn't fully clear, but if a compound literal occurs outside the body of a function, the initializer list must consist of constant expressions. Signed-off-by:
-
Kevin Winchester authored
commit 141168c3 and commit 3f806e50 upstream. Several fields in struct cpuinfo_x86 were not defined for the !SMP case, likely to save space. However, those fields still have some meaning for UP, and keeping them allows some #ifdef removal from other files. The additional size of the UP kernel from this change is not significant enough to worry about keeping up the distinction: text data bss dec hex filename 4737168 506459 972040 6215667 5ed7f3 vmlinux.o.before 4737444 506459 972040 6215943 5ed907 vmlinux.o.after for a difference of 276 bytes for an example UP config. If someone wants those 276 bytes back badly then it should be implemented in a cleaner way. Signed-off-by:
Kevin Winchester <kjwinchester@gmail.com> Cc: Steffen Persvold <sp@numascale.com> Link: http://lkml.kernel.org/r/1324428742-12498-1-git-send-email-kjwinchester@gmail.comSigned-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
- 09 Aug, 2012 22 commits
-
-
Greg Kroah-Hartman authored
-
Darren Hart authored
commit 6f7b0a2a upstream. If uaddr == uaddr2, then we have broken the rule of only requeueing from a non-pi futex to a pi futex with this call. If we attempt this, as the trinity test suite manages to do, we miss early wakeups as q.key is equal to key2 (because they are the same uaddr). We will then attempt to dereference the pi_mutex (which would exist had the futex_q been properly requeued to a pi futex) and trigger a NULL pointer dereference. Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Cc: Dave Jones <davej@redhat.com> Link: http://lkml.kernel.org/r/ad82bfe7f7d130247fbe2b5b4275654807774227.1342809673.git.dvhart@linux.intel.comSigned-off-by:
-
Darren Hart authored
commit f27071cb upstream. The WARN_ON in futex_wait_requeue_pi() for a NULL q.pi_state was testing the address (&q.pi_state) of the pointer instead of the value (q.pi_state) of the pointer. Correct it accordingly. Signed-off-by:
-
Darren Hart authored
commit b6070a8d upstream. If fixup_pi_state_owner() faults, pi_mutex may be NULL. Test for pi_mutex != NULL before testing the owner against current and possibly unlocking it. Signed-off-by:
-
Mikael Pettersson authored
commit c6636005 upstream. Booting a 3.2, 3.3, or 3.4-rc4 kernel on an Atari using the `nfeth' ethernet device triggers a WARN_ONCE() in generic irq handling code on the first irq for that device: WARNING: at kernel/irq/handle.c:146 handle_irq_event_percpu+0x134/0x142() irq 3 handler nfeth_interrupt+0x0/0x194 enabled interrupts Modules linked in: Call Trace: [<000299b2>] warn_slowpath_common+0x48/0x6a [<000299c0>] warn_slowpath_common+0x56/0x6a [<00029a4c>] warn_slowpath_fmt+0x2a/0x32 [<0005b34c>] handle_irq_event_percpu+0x134/0x142 [<0005b34c>] handle_irq_event_percpu+0x134/0x142 [<0000a584>] nfeth_interrupt+0x0/0x194 [<001ba0a8>] schedule_preempt_disabled+0x0/0xc [<0005b37a>] handle_irq_event+0x20/0x2c [<0005add4>] generic_handle_irq+0x2c/0x3a [<00002ab6>] do_IRQ+0x20/0x32 [<0000289e>] auto_irqhandler_fixup+0x4/0x6 [<00003144>] cpu_idle+0x22/0x2e [<001b8a78>] printk+0x0/0x18 [<0024d112>] start_kernel+0x37a/0x386 [<0003021d>] __do_proc_dointvec+0xb1/0x366 [<0003021d>] __do_proc_dointvec+0xb1/0x366 [<0024c31e>] _sinittext+0x31e/0x9c0 After invoking the irq's handler the kernel sees !irqs_disabled() and concludes that the handler erroneously enabled interrupts. However, debugging shows that !irqs_disabled() is true even before the handler is invoked, which indicates a problem in the platform code rather than the specific driver. The warning does not occur in 3.1 or older kernels. It turns out that the ALLOWINT definition for Atari is incorrect. The Atari definition of ALLOWINT is ~0x400, the stated purpose of that is to avoid taking HSYNC interrupts. irqs_disabled() returns true if the 3-bit ipl & 4 is non-zero. The nfeth interrupt runs at ipl 3 (it's autovector 3), but 3 & 4 is zero so irqs_disabled() is false, and the warning above is generated. When interrupts are explicitly disabled, ipl is set to 7. When they are enabled, ipl is masked with ALLOWINT. On Atari this will result in ipl = 3, which blocks interrupts at ipl 3 and below. So how come nfeth interrupts at ipl 3 are received at all? That's because ipl is reset to 2 by Atari-specific code in default_idle(), again with the stated purpose of blocking HSYNC interrupts. This discrepancy means that ipl 3 can remain blocked for longer than intended. Both default_idle() and falcon_hblhandler() identify HSYNC with ipl 2, and the "Atari ST/.../F030 Hardware Register Listing" agrees, but ALLOWINT is defined as if HSYNC was ipl 3. [As an experiment I modified default_idle() to reset ipl to 3, and as expected that resulted in all nfeth interrupts being blocked.] The fix is simple: define ALLOWINT as ~0x500 instead. This makes arch_local_irq_enable() consistent with default_idle(), and prevents the !irqs_disabled() problems for ipl 3 interrupts. Tested on Atari running in an Aranym VM. Signed-off-by:
Mikael Pettersson <mikpe@it.uu.se> Tested-by:
Michael Schmitz <schmitzmic@googlemail.com> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Andreas Schwab authored
commit 9e2760d1 upstream. User space access must always go through uaccess accessors, since on classic m68k user space and kernel space are completely separate. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Tested-by:
Thorsten Glaser <tg@debian.org> Signed-off-by:
-
Mark Brown authored
commit b8edf3e5 upstream. Otherwise if someone tries to use all four channels on AIF1 with the device in master mode we won't be able to clock out all the data. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Mark Brown authored
commit 9d40e558 upstream. Required for reliable power up from cold. Signed-off-by:
-
Takashi Iwai authored
commit bc733d49 upstream. The irq field of struct snd_mpu401 is supposed to be initialized to -1. Since it's set to zero as of now, a probing error before the irq installation results in a kernel warning "Trying to free already-free IRQ 0". Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44821Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Daniel Mack authored
commit aff252a8 upstream. uac_clock_source_is_valid() uses the control selector value to access the bmControls bitmap of the clock source unit. This is wrong, as control selector values start from 1, while the bitmap uses all available bits. In other words, "Clock Validity Control" is stored in D3..2, not D5..4 of the clock selector unit's bmControls. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-by:
Andreas Koch <andreas@akdesigninc.com> Signed-off-by:
-
Colin Ian King authored
commit f96a4216 upstream. The default 10 microsecond delay for the controller to come out of halt in dbgp_ehci_startup is too short, so increase it to 1 millisecond. This is based on emperical testing on various USB debug ports on modern machines such as a Lenovo X220i and an Ivybridge development platform that needed to wait ~450-950 microseconds. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
Mathias Krause authored
[ Upstream commits a117dacd and 8bbb1813 ] The tun module leaks up to 36 bytes of memory by not fully initializing a structure located on the stack that gets copied to user memory by the TUNGETIFF and SIOCGIFHWADDR ioctl()s. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
-
Jiri Kosina authored
[ Upstream commit 59ea33a6 ] Back in 2006, commit 1a2449a8 ("[I/OAT]: TCP recv offload to I/OAT") added support for receive offloading to IOAT dma engine if available. The code in tcp_rcv_established() tries to perform early DMA copy if applicable. It however does so without checking whether the userspace task is actually expecting the data in the buffer. This is not a problem under normal circumstances, but there is a corner case where this doesn't work -- and that's when MSG_TRUNC flag to recvmsg() is used. If the IOAT dma engine is not used, the code properly checks whether there is a valid ucopy.task and the socket is owned by userspace, but misses the check in the dmaengine case. This problem can be observed in real trivially -- for example 'tbench' is a good reproducer, as it makes a heavy use of MSG_TRUNC. On systems utilizing IOAT, you will soon find tbench waiting indefinitely in sk_wait_data(), as they have been already early-copied in tcp_rcv_established() using dma engine. This patch introduces the same check we are performing in the simple iovec copy case to the IOAT case as well. It fixes the indefinite recvmsg(MSG_TRUNC) hangs. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Benc authored
[ Upstream commit b1beb681 ] When device flags are set using rtnetlink, IFF_PROMISC and IFF_ALLMULTI flags are handled specially. Function dev_change_flags sets IFF_PROMISC and IFF_ALLMULTI bits in dev->gflags according to the passed value but do_setlink passes a result of rtnl_dev_combine_flags which takes those bits from dev->flags. This can be easily trigerred by doing: tcpdump -i eth0 & ip l s up eth0 ip sets IFF_UP flag in ifi_flags and ifi_change, which is combined with IFF_PROMISC by rtnl_dev_combine_flags, causing __dev_change_flags to set IFF_PROMISC in gflags. Reported-by:
Max Matveev <makc@redhat.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit e4c7f259 ] The problem is that we call this with a spin lock held. The call tree is: kaweth_start_xmit() holds kaweth->device_lock. -> kaweth_async_set_rx_mode() -> kaweth_control() -> kaweth_internal_control_msg() The kaweth_internal_control_msg() function is only called from kaweth_control() which used GFP_ATOMIC for its allocations. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 42493570 ] TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int. But patch "tcp: Add TCP_USER_TIMEOUT socket option"(dca43c75) didn't check the negative values. If a user assign -1 to it, the socket will set successfully and wait for 4294967295 miliseconds. This patch add a negative value check to avoid this issue. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Alan Cox authored
[ Upstream commit 8b72ff64 ] gcc really should warn about these ! Signed-off-by:
-
Alan Cox authored
[ Upstream commit c66b9b7d ] Reported-by: <rucsoftsec@gmail.com> Resolves-bug: http://bugzilla.kernel.org/show_bug?44441Signed-off-by:
-
Paul Moore authored
[ Upstream commit 89d7ae34 ] As reported by Alan Cox, and verified by Lin Ming, when a user attempts to add a CIPSO option to a socket using the CIPSO_V4_TAG_LOCAL tag the kernel dies a terrible death when it attempts to follow a NULL pointer (the skb argument to cipso_v4_validate() is NULL when called via the setsockopt() syscall). This patch fixes this by first checking to ensure that the skb is non-NULL before using it to find the incoming network interface. In the unlikely case where the skb is NULL and the user attempts to add a CIPSO option with the _TAG_LOCAL tag we return an error as this is not something we want to allow. A simple reproducer, kindly supplied by Lin Ming, although you must have the CIPSO DOI #3 configure on the system first or you will be caught early in cipso_v4_validate(): #include <sys/types.h> #include <sys/socket.h> #include <linux/ip.h> #include <linux/in.h> #include <string.h> struct local_tag { char type; char length; char info[4]; }; struct cipso { char type; char length; char doi[4]; struct local_tag local; }; int main(int argc, char **argv) { int sockfd; struct cipso cipso = { .type = IPOPT_CIPSO, .length = sizeof(struct cipso), .local = { .type = 128, .length = sizeof(struct local_tag), }, }; memset(cipso.doi, 0, 4); cipso.doi[3] = 3; sockfd = socket(AF_INET, SOCK_DGRAM, 0); #define SOL_IP 0 setsockopt(sockfd, SOL_IP, IP_OPTIONS, &cipso, sizeof(struct cipso)); return 0; } CC: Lin Ming <mlin@ss.pku.edu.cn> Reported-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Sjur Brændeland authored
[ Upstream commit 96f80d12 ] unregister_netdevice_notifier() must be called before unregister_pernet_subsys() to avoid accessing already freed pernet memory. This fixes the following oops when doing rmmod: Call Trace: [<ffffffffa0f802bd>] caif_device_notify+0x4d/0x5a0 [caif] [<ffffffff81552ba9>] unregister_netdevice_notifier+0xb9/0x100 [<ffffffffa0f86dcc>] caif_device_exit+0x1c/0x250 [caif] [<ffffffff810e7734>] sys_delete_module+0x1a4/0x300 [<ffffffff810da82d>] ? trace_hardirqs_on_caller+0x15d/0x1e0 [<ffffffff813517de>] ? trace_hardirqs_on_thunk+0x3a/0x3 [<ffffffff81696bad>] system_call_fastpath+0x1a/0x1f RIP [<ffffffffa0f7f561>] caif_get+0x51/0xb0 [caif] Signed-off-by:
Sjur Brændeland <sjur.brandeland@stericsson.com> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Neil Horman authored
[ Upstream commit 2eebc1e1 ] A few days ago Dave Jones reported this oops: [22766.294255] general protection fault: 0000 [#1] PREEMPT SMP [22766.295376] CPU 0 [22766.295384] Modules linked in: [22766.387137] ffffffffa169f292 6b6b6b6b6b6b6b6b ffff880147c03a90 ffff880147c03a74 [22766.387135] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 00000000000 [22766.387136] Process trinity-watchdo (pid: 10896, threadinfo ffff88013e7d2000, [22766.387137] Stack: [22766.387140] ffff880147c03a10 [22766.387140] ffffffffa169f2b6 [22766.387140] ffff88013ed95728 [22766.387143] 0000000000000002 [22766.387143] 0000000000000000 [22766.387143] ffff880003fad062 [22766.387144] ffff88013c120000 [22766.387144] [22766.387145] Call Trace: [22766.387145] <IRQ> [22766.387150] [<ffffffffa169f292>] ? __sctp_lookup_association+0x62/0xd0 [sctp] [22766.387154] [<ffffffffa169f2b6>] __sctp_lookup_association+0x86/0xd0 [sctp] [22766.387157] [<ffffffffa169f597>] sctp_rcv+0x207/0xbb0 [sctp] [22766.387161] [<ffffffff810d4da8>] ? trace_hardirqs_off_caller+0x28/0xd0 [22766.387163] [<ffffffff815827e3>] ? nf_hook_slow+0x133/0x210 [22766.387166] [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0 [22766.387168] [<ffffffff8159043d>] ip_local_deliver_finish+0x18d/0x4c0 [22766.387169] [<ffffffff815902fc>] ? ip_local_deliver_finish+0x4c/0x4c0 [22766.387171] [<ffffffff81590a07>] ip_local_deliver+0x47/0x80 [22766.387172] [<ffffffff8158fd80>] ip_rcv_finish+0x150/0x680 [22766.387174] [<ffffffff81590c54>] ip_rcv+0x214/0x320 [22766.387176] [<ffffffff81558c07>] __netif_receive_skb+0x7b7/0x910 [22766.387178] [<ffffffff8155856c>] ? __netif_receive_skb+0x11c/0x910 [22766.387180] [<ffffffff810d423e>] ? put_lock_stats.isra.25+0xe/0x40 [22766.387182] [<ffffffff81558f83>] netif_receive_skb+0x23/0x1f0 [22766.387183] [<ffffffff815596a9>] ? dev_gro_receive+0x139/0x440 [22766.387185] [<ffffffff81559280>] napi_skb_finish+0x70/0xa0 [22766.387187] [<ffffffff81559cb5>] napi_gro_receive+0xf5/0x130 [22766.387218] [<ffffffffa01c4679>] e1000_receive_skb+0x59/0x70 [e1000e] [22766.387242] [<ffffffffa01c5aab>] e1000_clean_rx_irq+0x28b/0x460 [e1000e] [22766.387266] [<ffffffffa01c9c18>] e1000e_poll+0x78/0x430 [e1000e] [22766.387268] [<ffffffff81559fea>] net_rx_action+0x1aa/0x3d0 [22766.387270] [<ffffffff810a495f>] ? account_system_vtime+0x10f/0x130 [22766.387273] [<ffffffff810734d0>] __do_softirq+0xe0/0x420 [22766.387275] [<ffffffff8169826c>] call_softirq+0x1c/0x30 [22766.387278] [<ffffffff8101db15>] do_softirq+0xd5/0x110 [22766.387279] [<ffffffff81073bc5>] irq_exit+0xd5/0xe0 [22766.387281] [<ffffffff81698b03>] do_IRQ+0x63/0xd0 [22766.387283] [<ffffffff8168ee2f>] common_interrupt+0x6f/0x6f [22766.387283] <EOI> [22766.387284] [22766.387285] [<ffffffff8168eed9>] ? retint_swapgs+0x13/0x1b [22766.387285] Code: c0 90 5d c3 66 0f 1f 44 00 00 4c 89 c8 5d c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 5d e8 4c 89 65 f0 4c 89 6d f8 66 66 66 66 90 <0f> b7 87 98 00 00 00 48 89 fb 49 89 f5 66 c1 c0 08 66 39 46 02 [22766.387307] [22766.387307] RIP [22766.387311] [<ffffffffa168a2c9>] sctp_assoc_is_match+0x19/0x90 [sctp] [22766.387311] RSP <ffff880147c039b0> [22766.387142] ffffffffa16ab120 [22766.599537] ---[ end trace 3f6dae82e37b17f5 ]--- [22766.601221] Kernel panic - not syncing: Fatal exception in interrupt It appears from his analysis and some staring at the code that this is likely occuring because an association is getting freed while still on the sctp_assoc_hashtable. As a result, we get a gpf when traversing the hashtable while a freed node corrupts part of the list. Nominally I would think that an mibalanced refcount was responsible for this, but I can't seem to find any obvious imbalance. What I did note however was that the two places where we create an association using sctp_primitive_ASSOCIATE (__sctp_connect and sctp_sendmsg), have failure paths which free a newly created association after calling sctp_primitive_ASSOCIATE. sctp_primitive_ASSOCIATE brings us into the sctp_sf_do_prm_asoc path, which issues a SCTP_CMD_NEW_ASOC side effect, which in turn adds a new association to the aforementioned hash table. the sctp command interpreter that process side effects has not way to unwind previously processed commands, so freeing the association from the __sctp_connect or sctp_sendmsg error path would lead to a freed association remaining on this hash table. I've fixed this but modifying sctp_[un]hash_established to use hlist_del_init, which allows us to proerly use hlist_unhashed to check if the node is on a hashlist safely during a delete. That in turn alows us to safely call sctp_unhash_established in the __sctp_connect and sctp_sendmsg error paths before freeing them, regardles of what the associations state is on the hash list. I noted, while I was doing this, that the __sctp_unhash_endpoint was using hlist_unhsashed in a simmilar fashion, but never nullified any removed nodes pointers to make that function work properly, so I fixed that up in a simmilar fashion. I attempted to test this using a virtual guest running the SCTP_RR test from netperf in a loop while running the trinity fuzzer, both in a loop. I wasn't able to recreate the problem prior to this fix, nor was I able to trigger the failure after (neither of which I suppose is suprising). Given the trace above however, I think its likely that this is what we hit. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by: davej@redhat.com CC: davej@redhat.com CC: "David S. Miller" <davem@davemloft.net> CC: Vlad Yasevich <vyasevich@gmail.com> CC: Sridhar Samudrala <sri@us.ibm.com> CC: linux-sctp@vger.kernel.org Signed-off-by:
-
Alan Cox authored
[ Upstream commit 7ac2908e ] Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44461Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
