Given that the TLB invalidation path is pretty rarely used, there
was never any advantage to using hyp_alternate_select() here.
has_vhe(), being a glorified static key, is the right tool for
the job.

Off you go.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>

There is no reason for using hyp_alternate_select when checking
for ARM64_WORKAROUND_834220, as each of the capabilities is
also backed by a static key. Just replace the KVM-specific
construct with cpus_have_const_cap(ARM64_WORKAROUND_834220).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>

While parts of the VGIC support a large number of vcpus (we
bravely allow up to 512), other parts are more limited.

One of these limits is visible in the KVM_IRQ_LINE ioctl, which
only allows 256 vcpus to be signalled when using the CPU or PPI
types. Unfortunately, we've cornered ourselves badly by allocating
all the bits in the irq field.

Since the irq_type subfield (8 bit wide) is currently only taking
the values 0, 1 and 2 (and we have been careful not to allow anything
else), let's reduce this field to only 4 bits, and allocate the
remaining 4 bits to a vcpu2_index, which acts as a multiplier:

  vcpu_id = 256 * vcpu2_index + vcpu_index

With that, and a new capability (KVM_CAP_ARM_IRQ_LINE_LAYOUT_2)
allowing this to be discovered, it becomes possible to inject
PPIs to up to 4096 vcpus. But please just don't.

Whilst we're there, add a clarification about the use of KVM_IRQ_LINE
on arm, which is not completely conditionned by KVM_CAP_IRQCHIP.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

Since commit 2f6ea23f ("arm64: KVM: Avoid marking pages as XN in
Stage-2 if CTR_EL0.DIC is set"), KVM has stopped marking normal memory
as execute-never at stage2 when the system supports D->I Coherency at
the PoU. This avoids KVM taking a trap when the page is first executed,
in order to clean it to PoU.

The patch that added this change also wrapped PAGE_S2_DEVICE mappings
up in this too. The upshot is, if your CPU caches support DIC ...
you can execute devices.

Revert the PAGE_S2_DEVICE change so PTE_S2_XN is always used
directly.

Fixes: 2f6ea23f ("arm64: KVM: Avoid marking pages as XN in Stage-2 if CTR_EL0.DIC is set")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

At the moment we use 2 IO devices per GICv3 redistributor: one
one for the RD_base frame and one for the SGI_base frame.

Instead we can use a single IO device per redistributor (the 2
frames are contiguous). This saves slots on the KVM_MMIO_BUS
which is currently limited to NR_IOBUS_DEVS (1000).

This change allows to instantiate up to 512 redistributors and may
speed the guest boot with a large number of VCPUs.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

Detected by Coccinelle (and Will Deacon) using
scripts/coccinelle/misc/semicolon.cocci.
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>

When a vpcu is about to block by calling kvm_vcpu_block, we call
back into the arch code to allow any form of synchronization that
may be required at this point (SVN stops the AVIC, ARM synchronises
the VMCR and enables GICv4 doorbells). But this synchronization
comes in quite late, as we've potentially waited for halt_poll_ns
to expire.

Instead, let's move kvm_arch_vcpu_blocking() to the beginning of
kvm_vcpu_block(), which on ARM has several benefits:

- VMCR gets synchronised early, meaning that any interrupt delivered
  during the polling window will be evaluated with the correct guest
  PMR
- GICv4 doorbells are enabled, which means that any guest interrupt
  directly injected during that window will be immediately recognised

Tang Nianyao ran some tests on a GICv4 machine to evaluate such
change, and reported up to a 10% improvement for netperf:

<quote>
	netperf result:
	D06 as server, intel 8180 server as client
	with change:
	package 512 bytes - 5500 Mbits/s
	package 64 bytes - 760 Mbits/s
	without change:
	package 512 bytes - 5000 Mbits/s
	package 64 bytes - 710 Mbits/s
</quote>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

Since commit 503a6286 ("KVM: arm/arm64: vgic: Rely on the GIC driver to
parse the firmware tables"), the vgic_v{2,3}_probe functions stopped using
a DT node. Commit 90977732 ("KVM: arm/arm64: vgic-new: vgic_init:
implement kvm_vgic_hyp_init") changed the functions again, and now they
require exactly one argument, a struct gic_kvm_info populated by the GIC
driver. Unfortunately the comments regressed and state that a DT node is
used instead. Change the function comments to reflect the current
prototypes.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

For VPIPT I-caches, we need I-cache maintenance on VMID rollover to
avoid an ABA problem. Consider a single vCPU VM, with a pinned stage-2,
running with an idmap VA->IPA and idmap IPA->PA. If we don't do
maintenance on rollover:

        // VMID A
        Writes insn X to PA 0xF
        Invalidates PA 0xF (for VMID A)

        I$ contains [{A,F}->X]

        [VMID ROLLOVER]

        // VMID B
        Writes insn Y to PA 0xF
        Invalidates PA 0xF (for VMID B)

        I$ contains [{A,F}->X, {B,F}->Y]

        [VMID ROLLOVER]

        // VMID A
        I$ contains [{A,F}->X, {B,F}->Y]

        Unexpectedly hits stale I$ line {A,F}->X.

However, for PIPT and VIPT I-caches, the VMID doesn't affect lookup or
constrain maintenance. Given the VMID doesn't affect PIPT and VIPT
I-caches, and given VMID rollover is independent of changes to stage-2
mappings, I-cache maintenance cannot be necessary on VMID rollover for
PIPT or VIPT I-caches.

This patch removes the maintenance on rollover for VIPT and PIPT
I-caches. At the same time, the unnecessary colons are removed from the
asm statement to make it more legible.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Marc Zyngier <maz@kernel.org>

Now that we have a cache of MSI->LPI translations, it is pretty
easy to implement kvm_arch_set_irq_inatomic (this cache can be
parsed without sleeping).

Hopefully, this will improve some LPI-heavy workloads.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

When performing an MSI injection, let's first check if the translation
is already in the cache. If so, let's inject it quickly without
going through the whole translation process.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

On a successful translation, preserve the parameters in the LPI
translation cache. Each translation is reusing the last slot
in the list, naturally evicting the least recently used entry.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

In order to avoid leaking vgic_irq structures on teardown, we need to
drop all references to LPIs before deallocating the cache itself.

This is done by invalidating the cache on vgic teardown.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

If an ITS gets disabled, we need to make sure that further interrupts
won't hit in the cache. For that, we invalidate the translation cache
when the ITS is disabled.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

If a vcpu disables LPIs at its redistributor level, we need to make sure
we won't pend more interrupts. For this, we need to invalidate the LPI
translation cache.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

The LPI translation cache needs to be discarded when an ITS command
may affect the translation of an LPI (DISCARD, MAPC and MAPD with V=0)
or the routing of an LPI to a redistributor with disabled LPIs (MOVI,
MOVALL).

We decide to perform a full invalidation of the cache, irrespective
of the LPI that is affected. Commands are supposed to be rare enough
that it doesn't matter.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

There's a number of cases where we need to invalidate the caching
of translations, so let's add basic support for that.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

Our LPI translation cache needs to be able to drop the refcount
on an LPI whilst already holding the lpi_list_lock.

Let's add a new primitive for this.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

Add the basic data structure that expresses an MSI to LPI
translation as well as the allocation/release hooks.

The size of the cache is arbitrarily defined as 16*nr_vcpus.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

Pull dax fixes from Dan Williams:
 "A filesystem-dax and device-dax fix for v5.3.

  The filesystem-dax fix is tagged for stable as the implementation has
  been mistakenly throwing away all cow pages on any truncate or hole
  punch operation as part of the solution to coordinate device-dma vs
  truncate to dax pages.

  The device-dax change fixes up a regression this cycle from the
  introduction of a common 'internal per-cpu-ref' implementation.

  Summary:

   - Fix dax_layout_busy_page() to not discard private cow pages of
     fs/dax private mappings.

   - Update the memremap_pages core to properly cleanup on behalf of
     internal reference-count users like device-dax"

* tag 'dax-fixes-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  mm/memremap: Fix reuse of pgmap instances with internal references
  dax: dax_layout_busy_page() should not unmap cow pages

Pull NTB fix from Jon Mason:
 "Bug fix for NTB MSI kernel compile warning"

* tag 'ntb-5.3-bugfixes' of git://github.com/jonmason/ntb:
  NTB/msi: remove incorrect MODULE defines

Pull RISC-V updates from Paul Walmsley:
 "A few minor RISC-V updates for v5.3-rc4:

   - Remove __udivdi3() from the 32-bit Linux port, converting the only
     upstream user to use do_div(), per Linux policy

   - Convert the RISC-V standard clocksource away from per-cpu data
     structures, since only one is used by Linux, even on a multi-CPU
     system

   - A set of DT binding updates that remove an obsolete text binding in
     favor of a YAML binding, fix a bogus compatible string in the
     schema (thus fixing a "make dtbs_check" warning), and clarifies the
     future values expected in one of the RISC-V CPU properties"

* tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board
  dt-bindings: riscv: remove obsolete cpus.txt
  RISC-V: Remove udivdi3
  riscv: delay: use do_div() instead of __udivdi3()
  dt-bindings: Update the riscv,isa string description
  RISC-V: Remove per cpu clocksource

Pull x86 fixes from Thomas Gleixner:
 "A few fixes for x86:

   - Don't reset the carefully adjusted build flags for the purgatory
     and remove the unwanted flags instead. The 'reset all' approach led
     to build fails under certain circumstances.

   - Unbreak CLANG build of the purgatory by avoiding the builtin
     memcpy/memset implementations.

   - Address missing prototype warnings by including the proper header

   - Fix yet more fall-through issues"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/lib/cpu: Address missing prototypes warning
  x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS
  x86/purgatory: Do not use __builtin_memcpy and __builtin_memset
  x86: mtrr: cyrix: Mark expected switch fall-through
  x86/ptrace: Mark expected switch fall-through

Pull perf tooling fixes from Thomas Gleixner:
 "Perf tooling fixes all over the place:

   - Fix the selection of the main thread COMM in db-export

   - Fix the disassemmbly display for BPF in annotate

   - Fix cpumap mask setup in perf ftrace when only one CPU is present

   - Add the missing 'cpu_clk_unhalted.core' event

   - Fix CPU 0 bindings in NUMA benchmarks

   - Fix the module size calculations for s390

   - Handle the gap between kernel end and module start on s390
     correctly

   - Build and typo fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf pmu-events: Fix missing "cpu_clk_unhalted.core" event
  perf annotate: Fix s390 gap between kernel end and module start
  perf record: Fix module size on s390
  perf tools: Fix include paths in ui directory
  perf tools: Fix a typo in a variable name in the Documentation Makefile
  perf cpumap: Fix writing to illegal memory in handling cpumap mask
  perf ftrace: Fix failure to set cpumask when only one cpu is present
  perf db-export: Fix thread__exec_comm()
  perf annotate: Fix printing of unaugmented disassembled instructions from BPF
  perf bench numa: Fix cpu0 binding

Pull scheduler fixes from Thomas Gleixner:
 "Three fixlets for the scheduler:

   - Avoid double bandwidth accounting in the push & pull code

   - Use a sane FIFO priority for the Pressure Stall Information (PSI)
     thread.

   - Avoid permission checks when setting the scheduler params for the
     PSI thread"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/psi: Do not require setsched permission from the trigger creator
  sched/psi: Reduce psimon FIFO priority
  sched/deadline: Fix double accounting of rq/running bw in push & pull

Pull irq fix from Thomas Gleixner:
 "A small fix for the affinity spreading code.

  It failed to handle situations where a single vector was requested
  either due to only one CPU being available or vector exhaustion
  causing only a single interrupt to be granted.

  The fix is to simply remove the requirement in the affinity spreading
  code for more than one interrupt being available"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/affinity: Create affinity mask for single vector

Pull objtool warning fix from Thomas Gleixner:
 "The recent objtool fixes/enhancements unearthed a unbalanced CLAC in
  the i915 driver.

  Chris asked me to pick the fix up and route it through"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  drm/i915: Remove redundant user_access_end() from __copy_from_user() error path

Pull gfs2 fix from Andreas Gruenbacher:
 "Fix incorrect lseek / fiemap results"

* tag 'gfs2-v5.3-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: gfs2_walk_metadata fix

A compilation -Wimplicit-fallthrough warning was enabled by commit
a035d552 ("Makefile: Globally enable fall-through warning")

Even though clang 10.0.0 does not currently support this warning without
a patch, clang currently does not support a value for this option.

  Link: https://bugs.llvm.org/show_bug.cgi?id=39382

The gcc default for this warning is 3 so removing the =3 has no effect
for gcc and enables the warning for patched versions of clang.

Also remove the =3 from an existing use in a parisc Makefile:
arch/parisc/math-emu/Makefile
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull char/misc driver fixes Greg KH:
 "Here are some small char/misc driver fixes for 5.3-rc4.

  Two of these are for the habanalabs driver for issues found when
  running on a big-endian system (are they still alive?) The others are
  tiny fixes reported by people, and a MAINTAINERS update about the
  location of the fpga development tree.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  coresight: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute
  MAINTAINERS: Move linux-fpga tree to new location
  nvmem: Use the same permissions for eeprom as for nvmem
  habanalabs: fix host memory polling in BE architecture
  habanalabs: fix F/W download in BE architecture

Pull driver core fixes from Greg KH:
 "Here are two small fixes for some driver core issues that have been
  reported. There is also a kernfs "fix" here, which was then reverted
  because it was found to cause problems in linux-next.

  The driver core fixes both resolve reported issues, one with gpioint
  stuff that showed up in 5.3-rc1, and the other finally (and hopefully)
  resolves a very long standing race when removing glue directories.
  It's nice to get that issue finally resolved and the developers
  involved should be applauded for the persistence it took to get this
  patch finally accepted.

  All of these have been in linux-next for a while with no reported
  issues. Well, the one reported issue, hence the revert :)"

* tag 'driver-core-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Revert "kernfs: fix memleak in kernel_ops_readdir()"
  kernfs: fix memleak in kernel_ops_readdir()
  driver core: Fix use-after-free and double free on glue directory
  driver core: platform: return -ENXIO for missing GpioInt

Pull tty fix from Greg KH:
 "Here is a single tty kgdb fix for 5.3-rc4.

  It fixes an annoying log message that has caused kdb to become
  useless. It's another fallout from commit ddde3c18 ("vt: More
  locking checks") which tries to enforce locking checks more strictly
  in the tty layer, unfortunatly when kdb is stopped, there's no need
  for locks :)

  This patch has been linux-next for a while with no reported issues"

* tag 'tty-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  kgdboc: disable the console lock when in kgdb

Pull staging / IIO driver fixes from Greg KH:
 "Here are some small staging and IIO driver fixes for 5.3-rc4.

  Nothing major, just resolutions for a number of small reported issues,
  full details in the shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'staging-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: adc: gyroadc: fix uninitialized return code
  docs: generic-counter.rst: fix broken references for ABI file
  staging: android: ion: Bail out upon SIGKILL when allocating memory.
  Staging: fbtft: Fix GPIO handling
  staging: unisys: visornic: Update the description of 'poll_for_irq()'
  staging: wilc1000: flush the workqueue before deinit the host
  staging: gasket: apex: fix copy-paste typo
  Staging: fbtft: Fix reset assertion when using gpio descriptor
  Staging: fbtft: Fix probing of gpio descriptor
  iio: imu: mpu6050: add missing available scan masks
  iio: cros_ec_accel_legacy: Fix incorrect channel setting
  IIO: Ingenic JZ47xx: Set clock divider on probe
  iio: adc: max9611: Fix misuse of GENMASK macro

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.3-rc4.

  The "biggest" one here is moving code from one file to another in
  order to fix a long-standing race condition with the creation of sysfs
  files for USB devices. Turns out that there are now userspace tools
  out there that are hitting this long-known bug, so it's time to fix
  them. Thankfully the tool-maker in this case fixed the issue :)

  The other patches in here are all fixes for reported issues. Now that
  syzbot knows how to fuzz USB drivers better, and is starting to now
  fuzz the userspace facing side of them at the same time, there will be
  more and more small fixes like these coming, which is a good thing.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: setup authorized_default attributes using usb_bus_notify
  usb: iowarrior: fix deadlock on disconnect
  Revert "USB: rio500: simplify locking"
  usb: usbfs: fix double-free of usb memory upon submiturb error
  usb: yurex: Fix use-after-free in yurex_delete
  usb: typec: tcpm: Ignore unsupported/unknown alternate mode requests
  xhci: Fix NULL pointer dereference at endpoint zero reset.
  usb: host: xhci-rcar: Fix timeout in xhci_suspend()
  usb: typec: ucsi: ccg: Fix uninitilized symbol error
  usb: typec: tcpm: remove tcpm dir if no children
  usb: typec: tcpm: free log buf memory when remove debug file
  usb: typec: tcpm: Add NULL check before dereferencing config

Pull pin control fixes from Linus Walleij:

 - Delay acquisition of regmaps in the Aspeed G5 driver.

 - Make a symbol static to reduce compiler noise.

* tag 'pinctrl-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: aspeed: Make aspeed_pinmux_ips static
  pinctrl: aspeed-g5: Delay acquisition of regmaps

Pull powerpc fix from Michael Ellerman:
 "Just one fix, a revert of a commit that was meant to be a minor
  improvement to some inline asm, but ended up having no real benefit
  with GCC and broke booting 32-bit machines when using Clang.

  Thanks to: Arnd Bergmann, Christophe Leroy, Nathan Chancellor, Nick
  Desaulniers, Segher Boessenkool"

* tag 'powerpc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  Revert "powerpc: slightly improve cache helpers"

Merge tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull fall-through fixes from Gustavo A. R. Silva:
 "Mark more switch cases where we are expecting to fall through, fixing
  fall-through warnings in arm, sparc64, mips, i386 and s390"

* tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  ARM: ep93xx: Mark expected switch fall-through
  scsi: fas216: Mark expected switch fall-throughs
  pcmcia: db1xxx_ss: Mark expected switch fall-throughs
  video: fbdev: omapfb_main: Mark expected switch fall-throughs
  watchdog: riowd: Mark expected switch fall-through
  s390/net: Mark expected switch fall-throughs
  crypto: ux500/crypt: Mark expected switch fall-throughs
  watchdog: wdt977: Mark expected switch fall-through
  watchdog: scx200_wdt: Mark expected switch fall-through
  watchdog: Mark expected switch fall-throughs
  ARM: signal: Mark expected switch fall-through
  mfd: omap-usb-host: Mark expected switch fall-throughs
  mfd: db8500-prcmu: Mark expected switch fall-throughs
  ARM: OMAP: dma: Mark expected switch fall-throughs
  ARM: alignment: Mark expected switch fall-throughs
  ARM: tegra: Mark expected switch fall-through
  ARM/hw_breakpoint: Mark expected switch fall-throughs

Merge tag 'kbuild-fixes-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - revive single target %.ko

 - do not create built-in.a where it is unneeded

 - do not create modules.order where it is unneeded

 - show a warning if subdir-y/m is used to visit a module Makefile

* tag 'kbuild-fixes-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: show hint if subdir-y/m is used to visit module Makefile
  kbuild: generate modules.order only in directories visited by obj-y/m
  kbuild: fix false-positive need-builtin calculation
  kbuild: revive single target %.ko

Mark switch cases where we are expecting to fall through.

Fix the following warnings (Building: arm-ep93xx_defconfig arm):

arch/arm/mach-ep93xx/crunch.c: In function 'crunch_do':
arch/arm/mach-ep93xx/crunch.c:46:3: warning: this statement may
fall through [-Wimplicit-fallthrough=]
      memset(crunch_state, 0, sizeof(*crunch_state));
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   arch/arm/mach-ep93xx/crunch.c:53:2: note: here
     case THREAD_NOTIFY_EXIT:
     ^~~~

Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>