- 23 Jun, 2006 40 commits
-
-
Christoph Lameter authored
Do not leave pages on the lists passed to migrate_pages(). Seems that we will not need any postprocessing of pages. This will simplify the handling of pages by the callers of migrate_pages(). Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Jes Sorensen <jes@trained-monkey.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Christoph Lameter authored
Currently migrate_pages() is mess with lots of goto. Extract two functions from migrate_pages() and get rid of the gotos. Plus we can just unconditionally set the locked bit on the new page since we are the only one holding a reference. Locking is to stop others from accessing the page once we establish references to the new page. Remove the list_del from move_to_lru in order to have finer control over list processing. [akpm@osdl.org: add debug check] Signed-off-by:
-
Kirill Korotaev authored
This patch fixes printk() under zone->lock in show_free_areas(). It can be unsafe to call printk() under this lock, since caller can try to allocate/free some memory and selfdeadlock on this lock. I found allocations/freeing mem both in netconsole and serial console. This issue was faced in reallity when meminfo was periodically printed for debug purposes and netconsole was used. Signed-off-by:
Kirill Korotaev <dev@openvz.org> Signed-off-by:
-
Ralf Baechle authored
Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Randy Dunlap authored
mm/filemap.c: - add lots of kernel-doc; - fix some typos and kernel-doc errors; - drop some blank lines between function close and EXPORT_SYMBOL(); Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Paul Drynoff authored
- Move comments for kmalloc to right place, currently it near __do_kmalloc - Comments for kzalloc - More detailed comments for kmalloc - Appearance of "kmalloc" and "kzalloc" man pages after "make mandocs" [rdunlap@xenotime.net: simplification] Signed-off-by:
Paul Drynoff <pauldrynoff@gmail.com> Acked-by:
-
KAMEZAWA Hiroyuki authored
Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Andrew Morton authored
Initialise total_memory earlier in boot. Because if for some reason we run page reclaim early in boot, we don't want total_memory to be zero when we use it as a divisor. And rename total_memory to vm_total_pages to avoid naming clashes with architectures. Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Martin Bligh <mbligh@google.com> Signed-off-by:
-
Ingo Molnar authored
The SLAB bootstrap code assumes that the first two kmalloc caches created (the INDEX_AC and INDEX_L3 kmalloc caches) wont be off-slab. But due to AC and L3 structure size increase in lockdep, one of them ended up being off-slab, and subsequently crashing with: Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: [<ffffffff80267478>] kmem_cache_alloc+0x26/0x7d The fix is to introduce a bootstrap flag and to use it to prevent off-slab caches being created so early during bootup. (The calculation for off-slab caches is quite complex so i didnt want to complicate things with introducing yet another INDEX_ calculation, the flag approach is simpler and smaller.) Signed-off-by:
Ingo Molnar <mingo@elte.hu> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Hugh Dickins authored
There are two calls to update_mmu_cache in fremap.c, both defective. The one in install_page needs to be accompanied by lazy_mmu_prot_update (some other cleanup time, move that into ia64 update_mmu_cache itself); and the one in install_file_pte should be removed since the pte is not present. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Hugh Dickins authored
Remove the unused variable o_flags from do_shmat. Signed-off-by:
-
Hugh Dickins authored
Now that we have atomic_inc_not_zero, it's more elegant for try_to_unuse to use that on mm_users: doesn't actually matter at present, but safer to be sure that once mm_users has gone to 0, nothing raises it for an instant. Signed-off-by:
-
David Howells authored
Add a new VMA operation to notify a filesystem or other driver about the MMU generating a fault because userspace attempted to write to a page mapped through a read-only PTE. This facility permits the filesystem or driver to: (*) Implement storage allocation/reservation on attempted write, and so to deal with problems such as ENOSPC more gracefully (perhaps by generating SIGBUS). (*) Delay making the page writable until the contents have been written to a backing cache. This is useful for NFS/AFS when using FS-Cache/CacheFS. It permits the filesystem to have some guarantee about the state of the cache. (*) Account and limit number of dirty pages. This is one piece of the puzzle needed to make shared writable mapping work safely in FUSE. Needed by cachefs (Or is it cachefiles? Or fscache? <head spins>). At least four other groups have stated an interest in it or a desire to use the functionality it provides: FUSE, OCFS2, NTFS and JFFS2. Also, things like EXT3 really ought to use it to deal with the case of shared-writable mmap encountering ENOSPC before we permit the page to be dirtied. From: Peter Zijlstra <a.p.zijlstra@chello.nl> get_user_pages(.write=1, .force=1) can generate COW hits on read-only shared mappings, this patch traps those as mkpage_write candidates and fails to handle them the old way. Signed-off-by:David Howells <dhowells@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Joel Becker <Joel.Becker@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Con Kolivas authored
If CONFIG_SWAP is not defined we get: mm/vmscan.c: In function âremove_mappingâ: mm/vmscan.c:387: warning: unused variable âswapâ Convert defines in swap.h into blank inline functions to fix this warning and be consistent. Signed-off-by:
Con Kolivas <kernel@kolivas.org> Signed-off-by:
-
Andy Whitcroft authored
Record the node id as we mark sections for instantiation. Use this nid during instantiation to direct allocations. Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Cc: Mike Kravetz <kravetz@us.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Martin Bligh <mbligh@google.com> Signed-off-by:
-
Pekka Enberg authored
Passing an invalid pointer to kfree() and kmem_cache_free() is likely to cause bad memory corruption or even take down the whole system because the bad pointer is likely reused immediately due to the per-CPU caches. Until now, we don't do any verification for this if CONFIG_DEBUG_SLAB is disabled. As suggested by Linus, add PageSlab check to page_to_cache() and page_to_slab() to verify pointers passed to kfree(). Also, move the stronger check from cache_free_debugcheck() to kmem_cache_free() to ensure the passed pointer actually belongs to the cache we're about to free the object. For page_to_cache() and page_to_slab(), the assertions should have virtually no extra cost (two instructions, no data cache pressure) and for kmem_cache_free() the overhead should be minimal. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by:
-
Christoph Lameter authored
Signed-off-by:
-
Christoph Lameter authored
This implements the use of migration entries to preserve ptes of file backed pages during migration. Processes can therefore be migrated back and forth without loosing their connection to pagecache pages. Note that we implement the migration entries only for linear mappings. Nonlinear mappings still require the unmapping of the ptes for migration. And another writepage() ugliness shows up. writepage() can drop the page lock. Therefore we have to remove migration ptes before calling writepages() in order to avoid having migration entries point to unlocked pages. Signed-off-by:
-
Christoph Lameter authored
If we install a migration entry then the rss not really decreases since the page is just moved somewhere else. We can save ourselves the work of decrementing and later incrementing which will just eventually cause cacheline bouncing. Signed-off-by:
-
Christoph Lameter authored
Use the migration entries for page migration This modifies the migration code to use the new migration entries. It now becomes possible to migrate anonymous pages without having to add a swap entry. We add a couple of new functions to replace migration entries with the proper ptes. We cannot take the tree_lock for migrating anonymous pages anymore. However, we know that we hold the only remaining reference to the page when the page count reaches 1. Signed-off-by:
-
Christoph Lameter authored
Rip the page migration logic out. Remove all code that has to do with swapping during page migration. This also guts the ability to migrate pages to swap. No one used that so lets let it go for good. Page migration should be a bit broken after this patch. Signed-off-by:
-
Christoph Lameter authored
Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Christoph Lameter <clameter@engr.sgi.com> Signed-off-by:
-
Christoph Lameter authored
Move the fallback code into a new fallback function and make the function behave like any other migration function. This requires retaking the lock if pageout() drops it. Signed-off-by:
-
Christoph Lameter authored
Change handling of address spaces. Pass a pointer to the address space in which the page is migrated to all migration function. This avoids repeatedly having to retrieve the address space pointer from the page and checking it for validity. The old page mapping will change once migration has gone to a certain step, so it is less confusing to have the pointer always available. Move the setting of the mapping and index for the new page into migrate_pages(). Signed-off-by:
-
Christoph Lameter authored
Extract try_to_unmap and rename remove_references -> move_mapping try_to_unmap() may significantly change the page state by for example setting the dirty bit. It is therefore best to unmap in migrate_pages() before calling any migration functions. migrate_page_remove_references() will then only move the new page in place of the old page in the mapping. Rename the function to migrate_page_move_mapping(). This allows us to get rid of the special unmapping for the fallback path. Signed-off-by:
-
Christoph Lameter authored
Drop nr_refs parameter from migrate_page_remove_references() The nr_refs parameter is not really useful since the number of remaining references is always 1 for anonymous pages without a mapping 2 for pages with a mapping 3 for pages with a mapping and PagePrivate set. Remove the early check for the number of references since we are checking page_mapcount() earlier. Ultimately only the refcount matters after the tree_lock has been obtained. Signed-off-by:
Christoph Lameter <clameter@sgi.coim> Signed-off-by:
-
Christoph Lameter authored
Remove the export for migrate_page_remove_references() and migrate_page_copy() that are unlikely to be used directly by filesystems implementing migration. The export was useful when buffer_migrate_page() lived in fs/buffer.c but it has now been moved to migrate.c in the migration reorg. Signed-off-by:
-
Christoph Lameter authored
Reorder functions in migrate.c. Group all migration functions for struct address_space_operations together. Signed-off-by:
-
Christoph Lameter authored
migrate is a better name since it is only used by page migration. Signed-off-by:
-
OGAWA Hirofumi authored
When a writeback_control's `start' and `end' fields are used to indicate a one-byte-range starting at file offset zero, the required values of .start=0,.end=0 mean that the ->writepages() implementation has no way of telling that it is being asked to perform a range request. Because we're currently overloading (start == 0 && end == 0) to mean "this is not a write-a-range request". To make all this sane, the patch changes range of writeback_control. So caller does: If it is calling ->writepages() to write pages, it sets range (range_start/end or range_cyclic) always. And if range_cyclic is true, ->writepages() thinks the range is cyclic, otherwise it just uses range_start and range_end. This patch does, - Add LLONG_MAX, LLONG_MIN, ULLONG_MAX to include/linux/kernel.h -1 is usually ok for range_end (type is long long). But, if someone did, range_end += val; range_end is "val - 1" u64val = range_end >> bits; u64val is "~(0ULL)" or something, they are wrong. So, this adds LLONG_MAX to avoid nasty things, and uses LLONG_MAX for range_end. - All callers of ->writepages() sets range_start/end or range_cyclic. - Fix updates of ->writeback_index. It seems already bit strange. If it starts at 0 and ended by check of nr_to_write, this last index may reduce chance to scan end of file. So, this updates ->writeback_index only if range_cyclic is true or whole-file is scanned. Signed-off-by:OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Nathan Scott <nathans@sgi.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Steven French <sfrench@us.ibm.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Signed-off-by:
-
Peter Zijlstra authored
The comment states: 'Setting a tag on a not-present item is a BUG.' Hence if 'index' is larger than the maxindex; the item _cannot_ be presen; it should also be a BUG. Also, this allows the following statement (assume a fresh tree): radix_tree_tag_set(root, 16, 1); to fail silently, but when preceded by: radix_tree_insert(root, 32, item); it would BUG, because the height has been extended by the insert. In neither case was 16 present. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Pekka Enberg authored
At present our slab debugging tells us that it detected a double-free or corruption - it does not distinguish between them. Sometimes it's useful to be able to differentiate between these two types of information. Add double-free detection to redzone verification when freeing an object. As explained by Manfred, when we are freeing an object, both redzones should be RED_ACTIVE. However, if both are RED_INACTIVE, we are trying to free an object that was already free'd. Signed-off-by:
Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Hua Zhong authored
With likely/unlikely profiling on my not-so-busy-typical-developmentsystem there are 5k misses vs 2k hits. So I guess we should remove the unlikely. Signed-off-by:
Hua Zhong <hzhong@gmail.com> Signed-off-by:
-
Nick Piggin authored
Reduce radix tree node memory usage by about a factor of 4 for small files (< 64K). There are pointer traversal and memory usage costs for large files with dense pagecache. Signed-off-by:
-
Nick Piggin authored
The ability to have height 0 radix trees (a direct pointer to the data item rather than going through a full node->slot) quietly disappeared with old-2.6-bkcvs commit ffee171812d51652f9ba284302d9e5c5cc14bdfd. On 64-bit machines this causes nearly 600 bytes to be used for every <= 4K file in pagecache. Re-introduce this feature, root tags stored in spare ->gfp_mask bits. Simplify radix_tree_delete's complex tag clearing arrangement (which would become even more complex) by just falling back to tag clearing functions (the pagecache radix-tree never uses this path anyway, so the icache savings will mean it's actually a speedup). On my 4GB G5, this saves 8MB RAM per kernel kernel source+object tree in pagecache. Pagecache lookup, insertion, and removal speed for small files will also be improved. This makes RCU radix tree harder, but it's worth it. Signed-off-by:
-
Dean Nelson authored
Modify the gen_pool allocator (lib/genalloc.c) to utilize a bitmap scheme instead of the buddy scheme. The purpose of this change is to eliminate the touching of the actual memory being allocated. Since the change modifies the interface, a change to the uncached allocator (arch/ia64/kernel/uncached.c) is also required. Both Andrey Volkov and Jes Sorenson have expressed a desire that the gen_pool allocator not write to the memory being managed. See the following: http://marc.theaimsgroup.com/?l=linux-kernel&m=113518602713125&w=2 http://marc.theaimsgroup.com/?l=linux-kernel&m=113533568827916&w=2Signed-off-by:
Dean Nelson <dcn@sgi.com> Cc: Andrey Volkov <avolkov@varma-el.com> Acked-by:
Jes Sorensen <jes@trained-monkey.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
Nick Piggin authored
Add remap_vmalloc_range, vmalloc_user, and vmalloc_32_user so that drivers can have a nice interface for remapping vmalloc memory. Signed-off-by:
-
Yasunori Goto authored
Consolidate the various arch-specific implementations of pxm_to_node() and node_to_pxm() into a single generic version. Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by:
-
Rafael J. Wysocki authored
Rework the swsusp's memory shrinker in the following way: - Simplify balance_pgdat() by removing all of the swsusp-related code from it. - Make shrink_all_memory() use shrink_slab() and a new function shrink_all_zones() which calls shrink_active_list() and shrink_inactive_list() directly for each zone in a way that's optimized for suspend. In shrink_all_memory() we try to free exactly as many pages as the caller asks for, preferably in one shot, starting from easier targets. If slab caches are huge, they are most likely to have enough pages to reclaim. The inactive lists are next (the zones with more inactive pages go first) etc. Each time shrink_all_memory() attempts to shrink the active and inactive lists for each zone in 5 passes. In the first pass, only the inactive lists are taken into consideration. In the next two passes the active lists are also shrunk, but mapped pages are not reclaimed. In the last two passes the active and inactive lists are shrunk and mapped pages are reclaimed as well. The aim of this is to alter the reclaim logic to choose the best pages to keep on resume and improve the responsiveness of the resumed system. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Christoph Hellwig authored
Use the _entry variant everywhere to clean the code up a tiny bit. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
