- 21 Sep, 2015 5 commits
-
-
Kevin Hao authored
This reverts commit 1298267b. That commit claim that the Vitesse VSC8641 is compatible with Vitesse 82xx. But this is not true. It seems that all the registers used in Vitesse phy driver are not compatible between 8641 and 82xx. It does cause malfunction of the Ethernet on p1010rdb-pa board. So we definitely need a rework in order to support the 8641 phy in this driver. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Woodhouse authored
Unless we reset the RX config, on real hardware I don't seem to receive any packets after a TX timeout. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Woodhouse authored
This can be called from cp_tx_timeout() with interrupts disabled. Spotted by Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikola Forró authored
Man page of ip-route(8) says following about route types: unreachable - these destinations are unreachable. Packets are dis‐ carded and the ICMP message host unreachable is generated. The local senders get an EHOSTUNREACH error. blackhole - these destinations are unreachable. Packets are dis‐ carded silently. The local senders get an EINVAL error. prohibit - these destinations are unreachable. Packets are discarded and the ICMP message communication administratively prohibited is generated. The local senders get an EACCES error. In the inet6 address family, this was correct, except the local senders got ENETUNREACH error instead of EHOSTUNREACH in case of unreachable route. In the inet address family, all three route types generated ICMP message net unreachable, and the local senders got ENETUNREACH error. In both address families all three route types now behave consistently with documentation. Signed-off-by:
Nikola Forró <nforro@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ivan Vecera authored
Check for DMA mapping errors, recover from them and register them in ethtool stats like other errors. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Acked-by:
Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 18 Sep, 2015 17 commits
-
-
Eric Dumazet authored
Tracking idle time in bictcp_cwnd_event() is imprecise, as epoch_start is normally set at ACK processing time, not at send time. Doing a proper fix would need to add an additional state variable, and does not seem worth the trouble, given CUBIC bug has been there forever before Jana noticed it. Let's simply not set epoch_start in the future, otherwise bictcp_update() could overflow and CUBIC would again grow cwnd too fast. This was detected thanks to a packetdrill test Neal wrote that was flaky before applying this fix. Fixes: 30927520 ("tcp_cubic: better follow cubic curve after idle period") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Cc: Jana Iyengar <jri@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Taku Izumi authored
Dan Carpenter reported off-by-one error of fjes at http://www.mail-archive.com/netdev@vger.kernel.org/msg77520.html Actually this is a bug. ep_shm_info[epidx].{es_status, zone} should be update inside for loop. This patch fixes this bug. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
I got this automated message from <shahed.shaikh@qlogic.com> when submitting a qlcnic patch: > Shahed Shaikh is no longer with QLogic. If you require assistance please > contact Ariel Elior Ariel.Elior@qlogic.com There's no point in having a bouncing address in MAINTAINERS. CC: Dept-GELinuxNICDev@qlogic.com CC: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Benc says: ==================== vxlan fixes This fixes various issues with vxlan related to IPv6. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
The callback for adding vxlan port can be called with the same port for both IPv4 and IPv6. Do not disable the offloading when the same port for both protocols is added and later one of them removed. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
The callback for adding vxlan port can be called with the same port for both IPv4 and IPv6. Do not disable the offloading if this occurs. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Sathya Perla <sathya.perla@avagotech.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
The callback for adding vxlan port can be called with the same port for both IPv4 and IPv6. Do not disable the offloading when the same port for both protocols is added and later one of them removed. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
When IPv6 address is set without IPv6 configured, the vxlan socket is mostly treated as an IPv4 one but various lookus in fdb etc. still take the AF_INET6 into account. This creates incosistencies with weird consequences. Just reject IPv6 addresses in such case. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
vxlan_setup is called when allocating the net_device, i.e. way before vxlan_newlink (or vxlan_dev_configure) is called. This means vxlan->default_dst is actually unset in vxlan_setup and the condition that sets needed_headroom always takes the else branch. Set the needed_headrom at the point when we have the information about the address family available. Fixes: e4c7ed41 ("vxlan: add ipv6 support") Fixes: 2853af6a ("vxlan: use dev->needed_headroom instead of dev->hard_header_len") CC: Cong Wang <cwang@twopensource.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Grzeschik authored
Add entry for arcnet to MAINTAINERS file and add myself as the maintainer of the subsystem. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: davem@davemloft.net Cc: joe@perches.com Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Grzeschik authored
For arcnet the bare minimum header only contains the 4 bytes to specify source, dest and offset (1, 1 and 2 bytes respectively). The corresponding struct is struct arc_hardware. The struct archdr contains additionally a union of possible soft headers. When doing $insertusecasehere packets might well include short (or even no?) soft headers. For this reason only use arc_hardware instead of archdr to determine the hard_header_len for an arcnet device. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2015-09-17 Here's one important patch for the 4.3-rc series that fixes an issue with Bluetooth LE encryption failing because of a too early check for the SMP context. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sasha Levin authored
If we didn't call ATMARP_MKIP before ATMARP_ENCAP the VCC descriptor is non-existant and we'll end up dereferencing a NULL ptr: [1033173.491930] kasan: GPF could be caused by NULL-ptr deref or user memory accessirq event stamp: 123386 [1033173.493678] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN [1033173.493689] Modules linked in: [1033173.493697] CPU: 9 PID: 23815 Comm: trinity-c64 Not tainted 4.2.0-next-20150911-sasha-00043-g353d875-dirty #2545 [1033173.493706] task: ffff8800630c4000 ti: ffff880063110000 task.ti: ffff880063110000 [1033173.493823] RIP: clip_ioctl (net/atm/clip.c:320 net/atm/clip.c:689) [1033173.493826] RSP: 0018:ffff880063117a88 EFLAGS: 00010203 [1033173.493828] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000000c [1033173.493830] RDX: 0000000000000002 RSI: ffffffffb3f10720 RDI: 0000000000000014 [1033173.493832] RBP: ffff880063117b80 R08: ffff88047574d9a4 R09: 0000000000000000 [1033173.493834] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff1000c622f53 [1033173.493836] R13: ffff8800cb905500 R14: ffff8808d6da2000 R15: 00000000fffffdfd [1033173.493840] FS: 00007fa56b92d700(0000) GS:ffff880478000000(0000) knlGS:0000000000000000 [1033173.493843] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [1033173.493845] CR2: 0000000000000000 CR3: 00000000630e8000 CR4: 00000000000006a0 [1033173.493855] Stack: [1033173.493862] ffffffffb0b60444 000000000000eaea 0000000041b58ab3 ffffffffb3c3ce32 [1033173.493867] ffffffffb0b6f3e0 ffffffffb0b60444 ffffffffb5ea2e50 1ffff1000c622f5e [1033173.493873] ffff8800630c4cd8 00000000000ee09a ffffffffb3ec4888 ffffffffb5ea2de8 [1033173.493874] Call Trace: [1033173.494108] do_vcc_ioctl (net/atm/ioctl.c:170) [1033173.494113] vcc_ioctl (net/atm/ioctl.c:189) [1033173.494116] svc_ioctl (net/atm/svc.c:605) [1033173.494200] sock_do_ioctl (net/socket.c:874) [1033173.494204] sock_ioctl (net/socket.c:958) [1033173.494244] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607) [1033173.494290] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613) [1033173.494295] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:186) [1033173.494362] Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 50 09 00 00 49 8b 9e 60 06 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 14 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 14 09 00 All code ======== 0: fa cli 1: 48 c1 ea 03 shr $0x3,%rdx 5: 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) 9: 0f 85 50 09 00 00 jne 0x95f f: 49 8b 9e 60 06 00 00 mov 0x660(%r14),%rbx 16: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 1d: fc ff df 20: 48 8d 7b 14 lea 0x14(%rbx),%rdi 24: 48 89 fa mov %rdi,%rdx 27: 48 c1 ea 03 shr $0x3,%rdx 2b:* 0f b6 04 02 movzbl (%rdx,%rax,1),%eax <-- trapping instruction 2f: 48 89 fa mov %rdi,%rdx 32: 83 e2 07 and $0x7,%edx 35: 38 d0 cmp %dl,%al 37: 7f 08 jg 0x41 39: 84 c0 test %al,%al 3b: 0f 85 14 09 00 00 jne 0x955 Code starting with the faulting instruction =========================================== 0: 0f b6 04 02 movzbl (%rdx,%rax,1),%eax 4: 48 89 fa mov %rdi,%rdx 7: 83 e2 07 and $0x7,%edx a: 38 d0 cmp %dl,%al c: 7f 08 jg 0x16 e: 84 c0 test %al,%al 10: 0f 85 14 09 00 00 jne 0x92a [1033173.494366] RIP clip_ioctl (net/atm/clip.c:320 net/atm/clip.c:689) [1033173.494368] RSP <ffff880063117a88> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
David Woodhouse reports skb_under_panic when we try to push ethernet header to fragmented ipv6 skbs: skbuff: skb_under_panic: text:c1277f1e len:1294 put:14 head:dec98000 data:dec97ffc tail:0xdec9850a end:0xdec98f40 dev:br-lan [..] ip6_finish_output2+0x196/0x4da David further debugged this: [..] offending fragments were arriving here with skb_headroom(skb)==10. Which is reasonable, being the Solos ADSL card's header of 8 bytes followed by 2 bytes of PPP frame type. The problem is that if netfilter ipv6 defragmentation is used, skb_cow() in ip6_forward will only see reassembled skb. Therefore, headroom is overestimated by 8 bytes (we pulled fragment header) and we don't check the skbs in the frag_list either. We can't do these checks in netfilter defrag since outdev isn't known yet. Furthermore, existing tests in ip6_fragment did not consider the fragment or ipv6 header size when checking headroom of the fraglist skbs. While at it, also fix a skb leak on memory allocation -- ip6_fragment must consume the skb. I tested this e1000 driver hacked to not allocate additional headroom (we end up in slowpath, since LL_RESERVED_SPACE is 16). If 2 bytes of headroom are allocated, fastpath is taken (14 byte ethernet header was pulled, so 16 byte headroom available in all fragments). Reported-by:
David Woodhouse <dwmw2@infradead.org> Diagnosed-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
Florian Westphal <fw@strlen.de> Tested-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Woodhouse authored
A comment in include/linux/skbuff.h says that: * Various parts of the networking layer expect at least 32 bytes of * headroom, you should not reduce this. This was demonstrated by a panic when handling fragmented IPv6 packets: http://marc.info/?l=linux-netdev&m=144236093519172&w=2 It's not entirely clear if that comment is still valid — and if it is, perhaps netif_rx() ought to be enforcing it with a warning. But either way, it is rather stupid from a performance point of view for us to be receiving packets into a buffer which doesn't have enough room to prepend an Ethernet header — it means that *every* incoming packet is going to be need to be reallocated. So let's fix that. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Javier Martinez Canillas authored
Drivers needs to export the OF id table and this be built into the module or udev won't have the necessary information to autoload the driver module when the device is registered via OF. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When changing rss key, we do not want to overwrite user provided key by the one provided by netdev_rss_key_fill(), which is the host random key generated at boot time. Fixes: 947cbb0a ("net/mlx4_en: Support for configurable RSS hash function") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Eyal Perry <eyalpe@mellanox.com> CC: Amir Vadai <amirv@mellanox.com> Acked-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 17 Sep, 2015 7 commits
-
-
David Ahern authored
Steffen reported that the recent change to add oif to dst lookups breaks the VTI use case. The problem is that with the oif set in the flow struct the comparison to the nh_oif is triggered. Fix by splitting the FLOWI_FLAG_VRFSRC into 2 flags -- one that triggers the vrf device cache bypass (FLOWI_FLAG_VRFSRC) and another telling the lookup to not compare nh oif (FLOWI_FLAG_SKIP_NH_OIF). Fixes: 42a7b32b ("xfrm: Add oif to dst lookups") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Phil Sutter authored
Aside from some lingual cleanup, point out which interfaces are not or partly covered by this setting. Signed-off-by:
Phil Sutter <phil@nwl.cc> Acked-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joe Stringer authored
Static code analysis reveals the following bug: net/openvswitch/conntrack.c:281 ovs_ct_helper() warn: unsigned 'protoff' is never less than zero. This signedness bug breaks error handling for IPv6 extension headers when using conntrack helpers. Fix the error by using a local signed variable. Fixes: cae3a262: "openvswitch: Allow attaching helpers to ct action" Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Joe Stringer <joestringer@nicira.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This patch adds NLM_F_REPLACE flag to ipv6 route replace notifications. This makes nlm_flags in ipv6 replace notifications consistent with ipv4. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johan Hedberg authored
There are several actions that smp_conn_security() might make that do not require a valid SMP context (conn->smp pointer). One of these actions is to encrypt the link with an existing LTK. If the SMP context wasn't initialized properly we should still allow the independent actions to be done, i.e. the check for the context should only be done at the last possible moment. Reported-by:
Chuck Ebbert <cebbert.lkml@gmail.com> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 4.0+
-
- 15 Sep, 2015 11 commits
-
-
Julia Lawall authored
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); @@ expression x; @@ -if (x != NULL) { \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); x = NULL; -} // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) { \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); x = NULL; -} // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesse Gross authored
Masks were added to OVS flows in a way that was backwards compatible with userspace programs that did not generate masks. As a result, it is possible that we may receive flows that do not have a mask and we need to synthesize one. Generating a mask requires iterating over attributes and descending into nested attributes. For each level we need to know the size to generate the correct mask. We do this with a linked table of attribute types. Although the logic to handle these nested attributes was there in concept, there are a number of bugs in practice. Examples include incomplete links between tables, variable length attributes being treated as nested and missing sanity checks. Signed-off-by:
Jesse Gross <jesse@nicira.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sjoerd Simons authored
The reset delays used for stmmac are in the order of 10ms to 1 second, which is far too long for udelay usage, so switch to using msleep. Practically this fixes the PHY not being reliably detected in some cases as udelay wouldn't actually delay for long enough to let the phy reliably be reset. Signed-off-by:
Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
problem reported: kernel 4.1.3 ------------ # bridge vlan port vlan ids eth0 1 PVID Egress Untagged 90 91 92 93 94 95 96 97 98 99 100 vmbr0 1 PVID Egress Untagged 94 kernel 4.2 ----------- # bridge vlan port vlan ids ndo_bridge_getlink can return -EOPNOTSUPP when an interfaces ndo_bridge_getlink op is set to switchdev_port_bridge_getlink and CONFIG_SWITCHDEV is not defined. This today can happen to bond, rocker and team devices. This patch adds -EOPNOTSUPP checks after calls to ndo_bridge_getlink. Fixes: 85fdb956 ("switchdev: cut over to new switchdev_port_bridge_getlink") Reported-by:
Alexandre DERUMIER <aderumier@odiso.com> Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Simon Guinot authored
This patch fixes a regression introduced by the commit a84e3289 ("net: mvneta: fix refilling for Rx DMA buffers"). Due to this commit the newly allocated Rx buffers are DMA-unmapped in place of those passed to the networking stack. Obviously, this causes data corruptions. This patch fixes the issue by ensuring that the right Rx buffers are DMA-unmapped. Reported-by:
Oren Laskin <oren@igneous.io> Signed-off-by:
Simon Guinot <simon.guinot@sequanux.org> Fixes: a84e3289 ("net: mvneta: fix refilling for Rx DMA buffers") Cc: <stable@vger.kernel.org> # v3.8+ Tested-by:
Oren Laskin <oren@igneous.io> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Martin KaFai Lau says: ==================== ipv6: Fix dst_entry refcnt bugs in ip6_tunnel v4: - Fix a compilation error in patch 5 when CONFIG_LOCKDEP is turned on and re-test it v3: - Merge a 'if else if' test in patch 4 - Use rcu_dereference_protected in patch 5 to fix a sparse check when CONFIG_SPARSE_RCU_POINTER is enabled v2: - Add patch 4 and 5 to remove the spinlock v1: This patch series is to fix the dst refcnt bugs in ip6_tunnel. Patch 1 and 2 are the prep works. Patch 3 is the fix. I can reproduce the bug by adding and removing the ip6gre tunnel while running a super_netperf TCP_CRR test. I get the following trace by adding WARN_ON_ONCE(newrefcnt < 0) to dst_release(): [ 312.760432] ------------[ cut here ]------------ [ 312.774664] WARNING: CPU: 2 PID: 10263 at net/core/dst.c:288 dst_release+0xf3/0x100() [ 312.776041] Modules linked in: k10temp coretemp hwmon ip6_gre ip6_tunnel tunnel6 ipmi_devintf ipmi_ms\ ghandler ip6table_filter ip6_tables xt_NFLOG nfnetlink_log nfnetlink xt_comment xt_statistic iptable_fil\ ter ip_tables x_tables nfsv3 nfs_acl nfs fscache lockd grace mptctl netconsole autofs4 rpcsec_gss_krb5 a\ uth_rpcgss oid_registry sunrpc ipv6 dm_mod loop iTCO_wdt iTCO_vendor_support serio_raw rtc_cmos pcspkr i\ 2c_i801 i2c_core lpc_ich mfd_core ehci_pci ehci_hcd e1000e mlx4_en ptp pps_core vxlan udp_tunnel ip6_udp\ _tunnel mlx4_core sg button ext3 jbd mpt2sas raid_class [ 312.785302] CPU: 2 PID: 10263 Comm: netperf Not tainted 4.2.0-rc8-00046-g4db9b63-dirty #15 [ 312.791695] Hardware name: Quanta Freedom /Windmill-EP, BIOS F03_3B04 09/12/2013 [ 312.792965] ffffffff819dca2c ffff8811dfbdf6f8 ffffffff816537de ffff88123788fdb8 [ 312.794263] 0000000000000000 ffff8811dfbdf738 ffffffff81052646 ffff8811dfbdf768 [ 312.795593] ffff881203a98180 00000000ffffffff ffff88242927a000 ffff88120a2532e0 [ 312.796946] Call Trace: [ 312.797380] [<ffffffff816537de>] dump_stack+0x45/0x57 [ 312.798288] [<ffffffff81052646>] warn_slowpath_common+0x86/0xc0 [ 312.799699] [<ffffffff8105273a>] warn_slowpath_null+0x1a/0x20 [ 312.800852] [<ffffffff8159f9b3>] dst_release+0xf3/0x100 [ 312.801834] [<ffffffffa03f1308>] ip6_tnl_dst_store+0x48/0x70 [ip6_tunnel] [ 312.803738] [<ffffffffa03fd0b6>] ip6gre_xmit2+0x536/0x720 [ip6_gre] [ 312.804774] [<ffffffffa03fd40a>] ip6gre_tunnel_xmit+0x16a/0x410 [ip6_gre] [ 312.805986] [<ffffffff8159934b>] dev_hard_start_xmit+0x23b/0x390 [ 312.808810] [<ffffffff815a2f5f>] ? neigh_destroy+0xef/0x140 [ 312.809843] [<ffffffff81599a6c>] __dev_queue_xmit+0x48c/0x4f0 [ 312.813931] [<ffffffff81599ae3>] dev_queue_xmit_sk+0x13/0x20 [ 312.814993] [<ffffffff815a0832>] neigh_direct_output+0x12/0x20 [ 312.817448] [<ffffffffa021d633>] ip6_finish_output2+0x183/0x460 [ipv6] [ 312.818762] [<ffffffff81306fc5>] ? find_next_bit+0x15/0x20 [ 312.819671] [<ffffffffa021fd79>] ip6_finish_output+0x89/0xe0 [ipv6] [ 312.820720] [<ffffffffa021fe14>] ip6_output+0x44/0xe0 [ipv6] [ 312.821762] [<ffffffff815c8809>] ? nf_hook_slow+0x69/0xc0 [ 312.823123] [<ffffffffa021d232>] ip6_xmit+0x242/0x4c0 [ipv6] [ 312.824073] [<ffffffffa021c9f0>] ? ac6_proc_exit+0x20/0x20 [ipv6] [ 312.825116] [<ffffffffa024c751>] inet6_csk_xmit+0x61/0xa0 [ipv6] [ 312.826127] [<ffffffff815eb590>] tcp_transmit_skb+0x4f0/0x9b0 [ 312.827441] [<ffffffff815ed267>] tcp_connect+0x637/0x7a0 [ 312.828327] [<ffffffffa0245906>] tcp_v6_connect+0x2d6/0x550 [ipv6] [ 312.829581] [<ffffffff81606f05>] __inet_stream_connect+0x95/0x2f0 [ 312.830600] [<ffffffff810ae13a>] ? hrtimer_try_to_cancel+0x1a/0xf0 [ 312.833456] [<ffffffff812fba19>] ? timerqueue_add+0x59/0xb0 [ 312.834407] [<ffffffff81607198>] inet_stream_connect+0x38/0x50 [ 312.835886] [<ffffffff8157cb17>] SYSC_connect+0xb7/0xf0 [ 312.840035] [<ffffffff810af6d3>] ? do_setitimer+0x1b3/0x200 [ 312.840983] [<ffffffff810af75a>] ? alarm_setitimer+0x3a/0x70 [ 312.841941] [<ffffffff8157d7ae>] SyS_connect+0xe/0x10 [ 312.842818] [<ffffffff81659297>] entry_SYSCALL_64_fastpath+0x12/0x6a [ 312.844206] ---[ end trace 43f3ecd86c3b1313 ]--- ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
This patch uses a seqlock to ensure consistency between idst->dst and idst->cookie. It also makes dst freeing from fib tree to undergo a rcu grace period. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
It is a prep work to get dst freeing from fib tree undergo a rcu grace period. The following is a common paradigm: if (ip6_del_rt(rt)) dst_free(rt) which means, if rt cannot be deleted from the fib tree, dst_free(rt) now. 1. We don't know the ip6_del_rt(rt) failure is because it was not managed by fib tree (e.g. DST_NOCACHE) or it had already been removed from the fib tree. 2. If rt had been managed by the fib tree, ip6_del_rt(rt) failure means dst_free(rt) has been called already. A second dst_free(rt) is not always obviously safe. The rt may have been destroyed already. 3. If rt is a DST_NOCACHE, dst_free(rt) should not be called. 4. It is a stopper to make dst freeing from fib tree undergo a rcu grace period. This patch is to use a DST_NOCACHE flag to indicate a rt is not managed by the fib tree. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
Problems in the current dst_entry cache in the ip6_tunnel: 1. ip6_tnl_dst_set is racy. There is no lock to protect it: - One major problem is that the dst refcnt gets messed up. F.e. the same dst_cache can be released multiple times and then triggering the infamous dst refcnt < 0 warning message. - Another issue is the inconsistency between dst_cache and dst_cookie. It can be reproduced by adding and removing the ip6gre tunnel while running a super_netperf TCP_CRR test. 2. ip6_tnl_dst_get does not take the dst refcnt before returning the dst. This patch: 1. Create a percpu dst_entry cache in ip6_tnl 2. Use a spinlock to protect the dst_cache operations 3. ip6_tnl_dst_get always takes the dst refcnt before returning Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-