ll_intent_drop_lock() may sleep in memory allocation, which
should not be called inside spinlock.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: Jian Yu <jian.yu@intel.com>
Reviewed-on: http://review.whamcloud.com/10674
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2272Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpus_weight and for_each_cpu_mask are deprecated, so replace them
with cpumask_weight and for_each_cpu respectively.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch continues to further remove deprecated functions, such as
any_online_cpu, for_each_cpu_mask and also cleaning up
usage of NR_CPUS in a few places
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fix the following spelling mistakes:
interoprability, SEPERATOR, defult.

Issue found using checkpatch.pl.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch renames struct DRxPathSel to dynamic_rx_path_sel in order to
keep the notations consistent and to remove the warning:
"CHECK: Avoid CamelCase". Done with coccinelle:
@@ @@
struct
-DRxPathSel
+dynamic_rx_path_sel
{...}

@@ @@
struct
-DRxPathSel
+dynamic_rx_path_sel
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the dig_t and DRxPathSel type definitions in order to
avoid the following warning: "WARNING: Do not add new typedefs".
Done with coccinelle and this script:

@r@ type t; identifier id; @@
typedef struct id
{...}
t;

@script:python get_name@
t << r.t;
tdres;
@@
coccinelle.tdres = t.replace("_t", "");

@r_match@ type r.t; identifier r.id;
identifier get_name.tdres; @@
-typedef
struct
-id
+tdres
{...}
-t
;
@r_replace@ type r.t; identifier get_name.tdres; @@
-t
+struct tdres
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replace memcpy with ethe_addr_copy to address the following
warning generated by checkpatch.pl: ""Prefer ether_addr_copy over memcpy
if the Ethernet addresses are __aligned(2)"

Follwoing is the output of pahole for the relevant datastructures:
1- for  "iwe.u.ap_addr.sa_data" and "wrqu->ap_addr.sa_data"

struct sockaddr {
        sa_family_t                sa_family;            /*     0     2 */
        char                       sa_data[14];          /*     2    14 */

        /* size: 16, cachelines: 1, members: 2 */
        /* last cacheline: 16 bytes */
};

struct iw_event {
        __u16                      len;                  /*     0     2 */
        __u16                      cmd;                  /*     2     2 */

        /* XXX 4 bytes hole, try to pack */

        union iwreq_data           u;                    /*     8    16 */

        /* size: 24, cachelines: 1, members: 3 */
        /* sum members: 20, holes: 1, sum holes: 4 */
        /* last cacheline: 24 bytes */
};

2- for  "pnetwork->network.MacAddress" and "pcur_bss->MacAddress"

struct wlan_network {
        struct list_head           list;                 /*     0    16 */
        int                        network_type;         /*    16     4 */
        int                        fixed;                /*    20     4 */
        unsigned int               last_scanned;         /*    24     4 */
        int                        aid;                  /*    28     4 */
        int                        join_res;             /*    32     4 */
        struct ndis_wlan_bssid_ex  network;              /*    36   884 */
        /* --- cacheline 14 boundary (896 bytes) was 24 bytes ago ---   */

        /* size: 920, cachelines: 15, members: 7 */
        /* last cacheline: 24 bytes */
};

struct ndis_wlan_bssid_ex {
        u32                        Length;               /*     0     4 */
        unsigned char              MacAddress[6];        /*     4     6 */
        u8                         Reserved[2];          /*    10     2 */
        struct ndis_802_11_ssid    Ssid;                 /*    12    36 */
        u32                        Privacy;              /*    48     4 */
        s32                        Rssi;                 /*    52     4 */
        enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;  /*    56     4 */
        struct NDIS_802_11_CONFIGURATION Configuration;  /*    60    32 */
        /* --- cacheline 1 boundary (64 bytes) was 28 bytes ago --- */
        enum NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode; /* 92     4 */
        NDIS_802_11_RATES_EX       SupportedRates;       /*    96    16 */
        u32                        IELength;             /*   112     4 */
        u8                         IEs[768];             /*   116   768 */
        /* --- cacheline 13 boundary (832 bytes) was 52 bytes ago --- */

        /* size: 884, cachelines: 14, members: 12 */
        /* last cacheline: 52 bytes */
};
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch converts code to use %pM specifier instead of placing each
byte on stack.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When we removed the ERRDEV() macro we made a small mistake so now it
doesn't print the "Virtual PCI devices" section header.

Fixes: 0aca7844 ('staging: unisys: remove ERRDEV macros')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes "braces {} are not necessary for single statement blocks" in uislib.
Signed-off-by: Michel von Czettritz <michel.von.czettritz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
        S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
        S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
        S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
	S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dev_* is prefered over pr_* when appropriate dev structure is present.
This patch replace pr_info and pr_warn with its dev_ counterpart.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Code using doubly linked list is iterated generally  using list_empty and
list_entry functions, but it can be better written using list_for_each_entry
macro.

This patch replaces the while loop containing list_empty and list_entry with
list_for_each_entry and list_for_each_entry_safe. list_for_each_entry is a
macro which is used to iterate over a list of given type. So while loop used to
iterate over a list can be replaced with list_for_each_entry macro. However, if
list_del is used in the loop, then list_for_each_entry_safe is a better choice.
This transformation is done by using the following coccinelle script.

@ rule1 @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry;
@@

- while (list_empty(&E1) == 0)
+ list_for_each_entry (I1, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...when != list_del(...);
       when != list_del_init(...);
 }

@ rule2  @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry_safe;
@@
   T *I1;
+  T *tmp;
  ...
- while (list_empty(&E1) == 0)
+ list_for_each_entry_safe (I1, tmp, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...
 }
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Code using doubly linked list is iterated generally  using list_empty and
list_entry functions, but it can be better written using list_for_each_entry
macro.

This patch replaces the while loop containing list_empty and list_entry with
list_for_each_entry and list_for_each_entry_safe. list_for_each_entry is a
macro which is used to iterate over a list of given type. So while loop used to
iterate over a list can be replaced with list_for_each_entry macro. However, if
list_del is used in the loop, then list_for_each_entry_safe is a better choice.
This transformation is done by using the following coccinelle script.

@ rule1 @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry;
@@

- while (list_empty(&E1) == 0)
+ list_for_each_entry (I1, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...when != list_del(...);
       when != list_del_init(...);
 }

@ rule2  @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry_safe;
@@
   T *I1;
+  T *tmp;
  ...
- while (list_empty(&E1) == 0)
+ list_for_each_entry_safe (I1, tmp, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...
 }
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Code using doubly linked list is iterated generally  using list_empty and
list_entry functions, but it can be better written using list_for_each_entry
macro.

This patch replaces the while loop containing list_empty and list_entry with
list_for_each_entry and list_for_each_entry_safe. list_for_each_entry is a
macro which is used to iterate over a list of given type. So while loop used to
iterate over a list can be replaced with list_for_each_entry macro. However, if
list_del is used in the loop, then list_for_each_entry_safe is a better choice.
This transformation is done by using the following coccinelle script.

@ rule1 @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry;
@@

- while (list_empty(&E1) == 0)
+ list_for_each_entry (I1, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...when != list_del(...);
       when != list_del_init(...);
 }

@ rule2  @
expression E1;
identifier I1, I2;
type T;
iterator name list_for_each_entry_safe;
@@
   T *I1;
+  T *tmp;
  ...
- while (list_empty(&E1) == 0)
+ list_for_each_entry_safe (I1, tmp, &E1, I2)
 {
	...when != T *I1;
- 	I1 = list_entry(E1.next, T, I2);
    ...
 }
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch.pl suggest to avoid assignment in if statement.

This patch moves assignments out of the if statement and place
it before the if statement. This is done using following coccinelle
script.

@@
expression E1;
identifier p;
statement S;
@@
- if ((p = E1))
+ p = E1;
+ if (p)
	S
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These print functions are called at the beginning
of the function and do not indicate any abnormal condition.
Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes macro true from if condition since variable
priv->ieee80211->LinkDetectInfo.bBusyTraffic is already of type bool.
Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Macro module_pci_driver is used for drivers whose init
and exit paths does only register and unregister to pci
API. So, here remove some boilerplate code by using
module_pci_driver. Also, change driver to rtsx_driver,
to avoid implicitly redefining driver_init.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Macro module_pcmcia_driver is used for drivers whose init
and exit paths does only register and unregister to pcmcia
API. So, here remove some boilerplate code by using
module_pcmcia_driver.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

static ints are initialized to 0 by the compiler.
Explicit initialization is not necessary.

Found by checkpatch.pl - ERROR: do not initialise statics to 0 or NULL

changes made using coccinelle script:
@@
type T;
identifier var;
@@
static T var
- =0
;
Signed-off-by: Supriya Karanth <iskaranth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

static ints are initialized to 0 by the compiler.
Explicit initialization is not necessary.

Found by checkpatch.pl - ERROR: do not initialise statics to 0 or NULL

changes made using coccinelle script:
@@
type T;
identifier var;
@@
static T var
- =0
;
Signed-off-by: Supriya Karanth <iskaranth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function setup_timer combines the initialization of a timer with the
initialization of the timer's function and data fields.

So, this patch combines the multiline code for timer initialization using the function
setup_timer. This issue is identified via coccinelle script.

@@
expression E1, E2, E3;
type T;
@@
- init_timer(&E1);
...
(
- E1.function = E2;
...
- E1.data = (T)E3;
+ setup_timer(&E1, E2, (T)E3);
|
- E1.data = (T)E3;
...
- E1.function = E2;
+ setup_timer(&E1, E2, (T)E3);
|
- E1.function = E2;
+ setup_timer(&E1, E2, 0);
)
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.

This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@

(
 x = devm_kzalloc(...);
|
 x = usb_alloc_urb(...);
|
 x = kmalloc_array(...);
|
 x = devm_ioremap(...);
|
 x = alloc_netdev(...);
)
 ...
- if(NULL == x)
+ if(!x)
        S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.

Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add braces to improve consistency when using if statements.
Found by checkpatch.pl:
"CHECK: braces {} should be used on all arms of this statement".
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch arranges multiple-line parameters in accordance with
the parameter above them to improve coding style.
Found by checkpatch.pl
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes unnecessary blank lines between functions.
Found by checkpatch.pl:
"CHECK: Please don't use multiple blank lines".
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces bit shifting on 1 with the BIT(x) macro
as it's extensively used by other function in this driver.

This was done with coccinelle:
@@ int g; @@

-(1 << g)
+BIT(g)
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch simplifies pointer comparison to NULL and makes code
easier to read. Warning found by checkpatch.pl.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes unnecessary space after type casts.
Warning found by checkpatch.pl.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the conditional return of the ade77*_probe functions
based on the return values of iio_device_register as the latter
returns 0 or ret, the same as the checked values.

Warning found by coccinelle.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.pl warning:

WARNING: braces {} are not necessary for single
statement blocks
Signed-off-by: Taiane Coelho Ramos <exhora.tat@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:

@rule1@
identifier x, y, z;
expression E1, E2;
@@

(
x = (y == z);
|
x = (E1 == E2);
|
 x =
-(
...
-)
 ;
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>